“changing” CODE on defiant electronic deadbolt (passcode) programming door lock keyless entry
Жүктеу.....
Пікірлер: 36
@henryw503 жыл бұрын
Thanks....I could not figure out how to do this. Lost the manual. This was most helpful.
@stelonous Жыл бұрын
I couldn't find this from others. Glad you had this video.
@Avenuegirl733 жыл бұрын
This was easy and fast. Thanks!
@chickennuggets8685 Жыл бұрын
thanks, now i have control to the pantry
@Sophiasmama143 жыл бұрын
Best video explains this!!! Thanks you
@michealsteckelberg991411 ай бұрын
Thanks for the help my guy
@terryjones83602 жыл бұрын
Thanks! The must have quit putting the instructions on the back of the cover as I just bought mine today and there are no instructions on the back. Nor are there any in the box. I guess they figure someone will put it on KZread and you have to search for them... However these instructions didn't work for me either.
@AnalystAyi Жыл бұрын
Thank you 🙏🏽
@eljay54263 жыл бұрын
Hi, will this be applicable to any types of defiant brand locks?
@denissegeez55093 жыл бұрын
Super easy ;) Thanks
@danieljchapman3734 Жыл бұрын
Thank You sir !
@bobeardington40445 ай бұрын
Awesome thanks
@zoom341515 күн бұрын
Where did u get the 20 from ????
@user-re9hw7wt7xАй бұрын
Does it matter if it is electronic?
@leolopez185414 күн бұрын
My newly installed keep beeping every about minute. I have put fresh batteries twice so I don’t think that is the cause. Any help would be greatly appreciated.
@georgegatti1 Жыл бұрын
You forgot to tell everyone to hit set after you added your new code.
@rosegeorges386210 ай бұрын
Now that I've reset my code how do I reset for the keys
@shahidanisar15253 күн бұрын
How to program it to to the phone
@nathzelyjaime87952 жыл бұрын
Once master code has been changed how can you change it again. I need to change it due to personal circumstances
@sebastianlomonaco61493 жыл бұрын
What if you don't know existing user codes? Can you erase them without knowing them as in the case of new ownership to a property
@donnadavis4099
2 жыл бұрын
Yes, you can do a factory reset
@donnadavis4099
2 жыл бұрын
Remove the lock’s battery cover and then remove one battery.Press and hold the SET button. Next, insert the battery back while still holding the SET button. Do not release the SET button until a long and short beep is heard.Enter the default Master Code to complete the factory reset. Keep in mind that restoring factory settings will erase all your stored information, including user codes and current Master Code. You can reprogram your lock after the reset-add user codes, new Master Code
@largol33t1
Жыл бұрын
@@donnadavis4099 If it's that simple, there's no purpose to using this unless it's just for very low security such as on a closet or to keep kids out of the attic door.
@jennifergamez87 Жыл бұрын
The program code does not work for me when doing the door handing identification process, I get a red light
@JadaD
10 ай бұрын
Same thing is happening to my did you ever figure out a solution?
@Thee_Garcias
9 ай бұрын
I found a solution! All you have to do is take off the last battery on the back. As your putting BACK the battery, hold the SET button. Once you hear a long beeping. Let go of the SET button. Then follow the instructions as followed. 😃 hope it helps and makes sense
@rolandosrt28 күн бұрын
Swapped batteries today && after pressing reset the keyboards are not beeping so is not registering any code
@laurenbrown8699 ай бұрын
Mine doesn't work 😢
@matteakle56132 жыл бұрын
How do you delete the 123456 code
@rythom810
Жыл бұрын
The question nobody wants to answer🤦♂️
@abc-pn2eb
Жыл бұрын
@@rythom810I answered it. kzread.info/dash/bejne/p4qVurmbZdCXgKw.html Push the red button in the back to enter programming mode. 123456 lock button 10 lock button *new master code 4-6 digits* lock button. Push red button in the back to exit programming mode.
@chelsiewizper
7 ай бұрын
@@abc-pn2eb I couldn’t get this method to work. After I put in the new master code and press the lock button, the lock button turns red and beeps 3 times like I got it wrong. I have tried 100 times and cannot figure out how to delete the 123456 code
@ryetim32 Жыл бұрын
I hat if it’s programmed and you don’t know the cosf
@jameses12212 жыл бұрын
Lol the buttotn
@brianandrade20283 ай бұрын
6766
@roberthatley74153 ай бұрын
Hey bozo try telling these people this doesn’t delete the original code yeah?
Пікірлер: 36
Thanks....I could not figure out how to do this. Lost the manual. This was most helpful.
I couldn't find this from others. Glad you had this video.
This was easy and fast. Thanks!
thanks, now i have control to the pantry
Best video explains this!!! Thanks you
Thanks for the help my guy
Thanks! The must have quit putting the instructions on the back of the cover as I just bought mine today and there are no instructions on the back. Nor are there any in the box. I guess they figure someone will put it on KZread and you have to search for them... However these instructions didn't work for me either.
Thank you 🙏🏽
Hi, will this be applicable to any types of defiant brand locks?
Super easy ;) Thanks
Thank You sir !
Awesome thanks
Where did u get the 20 from ????
Does it matter if it is electronic?
My newly installed keep beeping every about minute. I have put fresh batteries twice so I don’t think that is the cause. Any help would be greatly appreciated.
You forgot to tell everyone to hit set after you added your new code.
Now that I've reset my code how do I reset for the keys
How to program it to to the phone
Once master code has been changed how can you change it again. I need to change it due to personal circumstances
What if you don't know existing user codes? Can you erase them without knowing them as in the case of new ownership to a property
@donnadavis4099
2 жыл бұрын
Yes, you can do a factory reset
@donnadavis4099
2 жыл бұрын
Remove the lock’s battery cover and then remove one battery.Press and hold the SET button. Next, insert the battery back while still holding the SET button. Do not release the SET button until a long and short beep is heard.Enter the default Master Code to complete the factory reset. Keep in mind that restoring factory settings will erase all your stored information, including user codes and current Master Code. You can reprogram your lock after the reset-add user codes, new Master Code
@largol33t1
Жыл бұрын
@@donnadavis4099 If it's that simple, there's no purpose to using this unless it's just for very low security such as on a closet or to keep kids out of the attic door.
The program code does not work for me when doing the door handing identification process, I get a red light
@JadaD
10 ай бұрын
Same thing is happening to my did you ever figure out a solution?
@Thee_Garcias
9 ай бұрын
I found a solution! All you have to do is take off the last battery on the back. As your putting BACK the battery, hold the SET button. Once you hear a long beeping. Let go of the SET button. Then follow the instructions as followed. 😃 hope it helps and makes sense
Swapped batteries today && after pressing reset the keyboards are not beeping so is not registering any code
Mine doesn't work 😢
How do you delete the 123456 code
@rythom810
Жыл бұрын
The question nobody wants to answer🤦♂️
@abc-pn2eb
Жыл бұрын
@@rythom810I answered it. kzread.info/dash/bejne/p4qVurmbZdCXgKw.html Push the red button in the back to enter programming mode. 123456 lock button 10 lock button *new master code 4-6 digits* lock button. Push red button in the back to exit programming mode.
@chelsiewizper
7 ай бұрын
@@abc-pn2eb I couldn’t get this method to work. After I put in the new master code and press the lock button, the lock button turns red and beeps 3 times like I got it wrong. I have tried 100 times and cannot figure out how to delete the 123456 code
I hat if it’s programmed and you don’t know the cosf
Lol the buttotn
6766
Hey bozo try telling these people this doesn’t delete the original code yeah?