Installing a Steeda Tri-Ax Street Short Throw Shifter On a 2024 Mustang GT
Автокөліктер мен көлік құралдары
The manual transmission lives on in the 2024 Mustang GT, and if you have a manual S650 it makes a great first mod to get a dramatic improvement to the MT-82. With a shorter lever, this short throw shifter provides a 30% shorter throw and places the shift knob approximately 1" lower. You might have also noticed a slight buzzing or rattle in the shifter from the factory, this unit replaces the factory reverse lockout with a better fitting unit that reduces the overall NVH of the shifter itself.
Get this Shifter For Your 2015-2024 Mustang: www.steeda.com/steeda-s550-mu...
Part Number: 555-7316
MPN: 555 7316
Subscribe: bit.ly/Steeda_YT
Shop Ford performance parts at www.Steeda.com!
---
www.steeda.com
Steeda Performance Vehicles
www.steedavehicles.com
Steeda UK:
www.steeda.co.uk
Steeda Europe:
steeda.eu.com
Pinterest:
/ pins
Facebook:
/ steedaautosports
Instagram:
/ steedaautosports
Twitter:
/ steedaautosport
TikTok
/ steeda
0:00 Tri-Ax Shifter Overview
2:07 Removing the Factory Shifter
6:06 Installing the Steeda Tri-Ax Shifter
11:06 Outro
#2024mustang #mt82 #steeda
Пікірлер: 11
❤
@Steeda How is this even possible to do without removing the shifter from the car when the bolts that take it apart are on the bottom of the shifter??
Ironic that im only watching this because i bought an s550 with this kit and the lockout broke immediately, i guess i will have to see if that billet piece will fix it when i take it apart today
@steedaautosports
8 ай бұрын
You have a delrin and billet option from Steeda! www.steeda.com/steeda-555-7081-s550-reverse-lock-out-collar www.steeda.com/steeda-s550-mustang-billet-aluminum-reverse-lock-out-collar-15-16-gt-ecoboost-v6-555-7080.html
I installer this same set up, now i have issues going from 1 to 2, i guess you get what you pay for
@chunkyninja6988
2 ай бұрын
What’s the issue is it hard? Does it pop out?
@crazyglue76
Ай бұрын
I have a similar issue, 1 to 2 is sometimes a bit hard but going down from 3 to 2 is hard... Not sure why, maybe the delrin piece is too thick (or too thin) and the distance to the reverse lockout stop is not quite right. I'll contact Steeda.
So the same shit since 1935? 😂😂😂
Yea, no thank you. Im not about to take my brand new car apart for this shit. Im too paranoid to do it myself and i dont trust anyone touching my car. This dude put grease all over the counsel panels. Heck no.
@Wraith-tu3ri
Ай бұрын
I was thinking the same thing when he was using grease and touching stuff and putting the grease packet on the floor. I would smack the shit out of him if that was my car 😂
@Redline._.
20 күн бұрын
So.. don't? Lol what a bozo ass comment