Installing A Spartan Lunchbox Locker Into My Jeep Cherokee XJ

Автокөліктер мен көлік құралдары

In this video I install a spartan locker into a jeep cherokee XJ. I really like the function of lunchbox lockers. I have had an aussie locker in my TJ for a few years now. I went with the spartan for my XJ mostly because I just wanted to try it. Hope you like this video and find it helpful. Thanks for watching.
Spartan Locker: amzn.to/3Fr1niS
The Right Stuff: amzn.to/3fpT0cJ
Follow us on Instagram : itsprojectventure
Please e-mail itsprojectventure@gmail.com for all business inquiries.
DISCLAIMER:
This video is intended for entertainment purposes only. The creators of this content and any affiliates are not liable or responsible for any property damage or injury as a result of any information contained in this video. Some links above are affiliate links which there may or may not be a small commission on the use of these links.

Пікірлер: 15

  • @timjohnson5199
    @timjohnson519911 күн бұрын

    You are Awesome , made it easy to follow along, enjoyed your video , It was very helpful for my weekend project

  • @DesertGeezers
    @DesertGeezers10 ай бұрын

    Good explanations. Nice !

  • @darylfrye3600
    @darylfrye36003 жыл бұрын

    Love your little helper

  • @ProjectVenture

    @ProjectVenture

    3 жыл бұрын

    He does his best, lol.

  • @dandahermitseals5582
    @dandahermitseals5582 Жыл бұрын

    Well done. Did u do the pumpkin paint work?? I like it. I was surprised you didn't run Locktite blue on the ring gear bolts. Will be following. I'm curently building an MJ with the Metric ton option Dana 44 TrakLok axel. Not sure if it's ratio yet. Dandahermit

  • @ProjectVenture

    @ProjectVenture

    10 ай бұрын

    I did all the paintwork. It was definitely a budget job.

  • @MoparMan-ff8fb
    @MoparMan-ff8fb2 жыл бұрын

    so how how much did the kit cost and the name / part number ? also does the 8.25 in the rear of your jeep have sure grip or just a one wheel peel ?

  • @ProjectVenture

    @ProjectVenture

    2 жыл бұрын

    There should be links in the description to everything used. My 8.25 is currently just an open diff, no sure grip. I plan on just doing a “lunchbox” locker in the rear as well.

  • @MoparMan-ff8fb

    @MoparMan-ff8fb

    2 жыл бұрын

    @@ProjectVenture O ok sorry about that . Also when driving with the locker in does it have any issues on curves or tight corners like tire tire hop or churping of the tires and so on ?

  • @ProjectVenture

    @ProjectVenture

    2 жыл бұрын

    I’ll get a chirp from time to time in cement parking lots but not with normal driving. It will noticeably click while turning corners but that’s what it’s designed to do. Every once and a while someone will tell me it sounds like something’s wrong with it and I have to explain to them how it works.

  • @MoparMan-ff8fb

    @MoparMan-ff8fb

    2 жыл бұрын

    @@ProjectVenture ok cool

  • @kevinc9934
    @kevinc99342 жыл бұрын

    is that a high pinion front ? you swapped that in? nice video by the way.

  • @ProjectVenture

    @ProjectVenture

    2 жыл бұрын

    Thank you and it actually comes in these stock. Mine did however start it’s life as a 2wd model and I swapped the whole drivetrain over from a donor.

  • @kevinc9934

    @kevinc9934

    2 жыл бұрын

    @@ProjectVenture yeah mine is low pinion and d35. Trying to figure out what route I wanna go. Would like high pinion front and ford 8.8 but I'm not gonna rock climbing so probably overkill lol

  • @ProjectVenture

    @ProjectVenture

    2 жыл бұрын

    It might be worth it long term depending on what your plans are down the road but I also know guys that drive like hell and never have a problem with their d35.

Келесі