The we want finally a front-bumper button.

@Nantzintheir

4 ай бұрын

Altho it looks good without it too

@N-Krazy1976

4 ай бұрын

Yes!! 💯

@bradthornton6953

4 ай бұрын

He’s built a really nice “OEM +” Evo (his own words). It looks like he was in an accident and didn’t replace the front bumper.

@Elmanret

4 ай бұрын

We need it!!!!!!!!!

That ecu setup came out so clean

I think maybe you should try and tackle learning how to make a base map for it. If anyone can do it, it would be you with your motto "if someone else can do it why can't i" but man sick car I've followed every single video ever since the start of the type R build and you are without a doubt doing stuff no other "car KZreadr" is doing. You're in you're own league man keep it up

@Bennoit007

4 ай бұрын

Mat armstrong just enter the chat 😂

@nodekapunk

2 ай бұрын

They have base maps for the 8 and 9 already. He would just need to set up a few sensor settings which doesn’t take long to figure out.

That set up is looking good Devin!

Good to see our Aussie made Haltech being used. They do make a 52mm multifunctional gauge as well to replace the AEM wideband.

@SollessGarage

4 ай бұрын

aka GaugeArt rebranded as Haltech, Innovative and Link

You've gotten really good at some of that fab stuff.

Haltech Ecu set up looks clean AF 🔥🔥🔥🔥🔥🔥

i love having 2 videos to watch in a down, missed the one from yesterday

Devin you should look at getting a can check gauge for the Evo! 👌😊 New ecu setup look Minty fresh!

Looks amazing that mate.

Haltech CAN Gauge. I have one in my 9, and it's great. I replaced all my gauges, and I have it mounted in the ashtray with a DI Fab 3D-printed holder.

Picking up a evo 9 with the elite 2500, never had a haltech or open sourced before I’m excited

For the love of all that is holy, when the hell is the front bumper going on, I can’t bare the tension any more

He makes look easy. Looks good

Front bumper and tune let’s go!

Great video , informational

You can use the metal part in the wiper blades to be able to pass the wires easily from the engine bay to the inside. Since it's flat it will go easily

Been waiting for the front bumper to go

Needs the front bumper to complete this awesome build and to complete the overall picture of the car.

Lets go.... yeah!! 💪👍👌💥💢💯 You should have left a little plastic on the lower right to mount the plate.

Sometimes insread of using two sided tape, we will use velcro to mount stuff that might need to br removed. Its stong enough to hold my radar detector on my R1 @170+mph and its cleaner than wire ties

There's another rear crash bar that gives you more protection and more bracing on the lower part of the diffuser. I have it on my evo 8.

Hey Devin can you do a refresh of whats done to your bike in one of the coming videos? Looks clean af

Damn I wish I had the brain for this. Nice job

love the build. Curious why is the door for your cabin air filter cut out behind the glove box?

Not sure if anyone else watched this with headphones but the last 30 seconds of the video the sound was doing some funky cutting in and out

💛 🖤 are 🔥🔥

You should get the haltech canbus gauge.

top man. eu colocaria uma FUELTCH UMA FT 600 ai nesse EVO ia ficar show

finally... what you should've done from the start!

@gregcass12

4 ай бұрын

PLEASE READ DEVIN - Haltechs website has a section to download base maps for your car to start from, I'd highly suggest giving that a go and work up from there.

Long time no fast car and we need a sendddddd

Now we just wait for the toooooooooner

It would look nice power coated

Awsome

Very nice...

Nice 🙂

Prolly too late but there’s a 3d printed mount online that’s cheap that puts it in the stock location, mount the wb1 to the back of it route the plug and play box into the shifter cable area. Mine came out clean no cutting

What are you waiting on to get the front end together

Hay Devin would like to know your thoughts on the supposed new Lancer Evo 11

Very nice,😎😎😎👍👍👍

Hey Devin. What camera do you use for most your footage. im looking to upgrade from the iphone 13 pro max. thanks brother!

Bout to ship my evo X to you and have you build it 😩

❤

What’s up with the hood vent ? It’s driving me crazy

Does the Evo have spats, aka factory mud guards (NOT FLAPS - EWWW)?

Don't know why it was said that the 8 ecu is bad. When flash with tephramod, they are very capable. Obviously, a haltech is better, but the stock ecu isn't bad as stated.

Let’s see Devin learns how to toonnnnnn

why not put the haltech dash in the glove box?

At 3:07, my man is driving an Evo and gives the Subaru (✌️) wave... lol guess we now know where Devin's heart lies jkjk lol 🤣

@nhelcarreon574

4 ай бұрын

I saw a mustang

@Bennettgrabey

4 ай бұрын

​@@nhelcarreon574yeah, the person in the white mustang didn't give Devin the Subaru wave, Devin gave the peace sign to him lol

@Bennettgrabey

4 ай бұрын

​@@xxaintweapairxx😂😂

Buy an oscillating tool, it's amazing for plastic, and 10x less dangerous.

Should I get the haltech 1500 or 2500 for my evo 8? I'm just trying to hit 500hp chillin. Also, what else should I order with it to make sure my tuner has everything to make my car run flawless?

Curious if the ECU could have been tucked under passenger seat

@nodekapunk

2 ай бұрын

You would have to extend the wiring harness

Devin please give the EVO 4 a little bit of air in the Tyres 🥺

snap i was just thinking that plate needs to be black

as you have developed, I won't be surprised if you have a rolling country road and map the car yourself.

Side note, I'd say get a pro fab hood dump setup on the Type R (if you must do a hood dump, which is highly ill-advised UGH). The current one is blasphemous, i.e. bummy!!!

@joemaggio6806

4 ай бұрын

I understand the thrill of a hood exit especially on a car like that. I think what would fit the whole feel of the build better would be a super clean fender exit. You could use a bypass valve that opens the fender exit for WOT and make the car more daily able and not have fumes in the cabin while cruising

@rj5485

4 ай бұрын

@joemaggio6806 I'm not a fan of fender exits neither but yeah, a vavle system sounds legit! I never been a fan of anything other than an actual exhaust system for ANY type of setup. Hood and fender exits are just plain bummy and looks lazy imho. I've seen some cool exits in drag spec cars but still not a fan whatsoever!

@joemaggio6806

3 ай бұрын

@@rj5485 I totally get it. It takes a certain car to be able to rock anything but a plain old exhaust. Seems like the man has made up his mind on this setup though. Maybe he'll see this and go with the cutout/valve since he built that whole nice exhaust that's headed for the bin haha

You need to turn your brightness in your videos up more devin

whats up with audio? last 3 episodes my right ear was not rly pleased ....

You need a shop cat.

get a lancer glovebox from the junkyard so you can cut one up without feeling too guilty

@paulkersey6283

4 ай бұрын

Not many of these cars left in junk yards anymore.. especially in Washington

@TxcGren

4 ай бұрын

@@paulkersey6283 he tore the trunk interior and sunroof out of a base lander what do you mean lol

@paulkersey6283

4 ай бұрын

@@TxcGren okay that still doesn’t mean there all in junkyards and be lucky if it wasn’t picked through already especially a glove compartment

@TxcGren

4 ай бұрын

@@paulkersey6283 do you mean to say a base lancer won’t be available in junkyards in washington? because devin himself has found one every time he needed to get pieces that are compatible from a base lancer lol

@TxcGren

4 ай бұрын

@@paulkersey6283 and i’m saying lancer… not a lancer evo, i drive one, i know how common they are 😂😂

This car needs the front bumper lol

Read mi mind 😂

Adam LZ is looking for a cheap ish Subaru

sorry could not watch you cut that dash

Bro command strips would work wonders in your life instead of double sided tape and zip ties!

UU

Why this radio....Amazing build but these radio uff

@That1PaintballGuy

2 ай бұрын

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

oof rip my ears on the grinder.. I found a strip of velcro vs double sided tape was better incase it has to keep coming off vs a new peice of tape everytime

Why in the world do you say the word Cure like that? 🤢😂

The Evo is slowly losing its OEMness

"Smoke him"