You’re the best. Your video is clearer and kore helpful than the manufacturer’s install video

@CarSeatSite

2 жыл бұрын

Thanks for the kind comment, Molly! I'm glad the video helped you!

Thank you!! This has cleared up so much confusion that I had about locking off the shoulder belt.

@CarSeatSite

2 жыл бұрын

I’m so glad it helped, Abby!

Thank u so much, from Argentina

Thank you for providing this info in such great detail. I’m going to check on my daughters car seat now.

@CarSeatSite

Жыл бұрын

Thank you for the kind comment! I’m glad the video helped you!

I bought this seat when I took it out of box it was so heavy I was going to return it immediately then watched this video so easy to install out weighs the weight worth every penny

@CarSeatSite

2 жыл бұрын

It *is* a very heavy seat, but I'm so glad my video showed you how easy it is to install!

Great job, this video is mechanic Dad approved. 👍 Simple enough for even me.

@CarSeatSite

2 жыл бұрын

Thanks for watching!

Nice car and nice review/instructions

@CarSeatSite

2 жыл бұрын

Thanks so much!

i want this one for my 3yr old son.. i hope its gonna be available in our area soon🙂

We just received our carseat that came with the rebound bar. I have a 2000 honda accord and my 3 yr. Old is 40 inches and probably 45lbs my wife wants him rear facing. Do u have any suggestions?

@CarSeatSite

3 жыл бұрын

Hi Tim. Great job keeping your 3 yr old rear-facing! You might have more room for the front passengers if you install it in the center seat; however, for a 3 yr old, it can be placed pretty upright if you want it in an outside position.

Thanks for you video! I just received mine today but it seems that the lash for the arneses extension is too short … is there a way to extended more? I saw there’s some lash under the seat in a black bag but I don’t know for what it is…

@CarSeatSite

2 жыл бұрын

Hi Trinidad. The straps in the black bag are for installing the carseat with lower anchor connectors (LATCH). Just leave them there-this seat is designed to be installed with the seat belt. If the harness adjuster strap (that strap where your child's feet are) is still too short after you've tried pulling it, you can try removing the padding inside the seat to see if that helps. It depends on the size of your child, though. If your child is large enough, they may not need the extra padding to help fit (and it has to be take out at 20 lbs./9.1kg). If you're still having problems, try lifting the headrest all the way up and putting it back down. Sometimes carseats need to be "reset".

@tgdels

2 жыл бұрын

@@CarSeatSite thank you so much for your quick answer! I’m expecting my baby for June but I received the car seat today and thought that it might be too short but maybe it’s normal and will not need more 😅 thanks!

@CarSeatSite

2 жыл бұрын

@@tgdels Congratulations! You'll need all the padding inserts then. See if this video helps: kzread.info/dash/bejne/q6Vku6SEc9fAgcY.html.

If the anti rebound bar prevents the base from laying flat on the vehicle seat can you recline the vehicle seat back?

@CarSeatSite

3 жыл бұрын

Hi Emily. I would try moving the One4Life back on the vehicle seat first. It can have up to 3" of overhang off the vehicle seat, though it does give you less legroom up in the front seats. If that doesn't solve the issue and let the carseat base sit flat, then look in your vehicle owner's manual and see if it says anything about reclining the vehicle seat back. It may have rules about how far back it can be reclined for carseats. If the vehicle seat is too reclined, it kind of defeats the purpose of having the anti-rebound bar on, because the carseat will have to travel farther to reach the seat back before making contact in a crash. We want the ARB to be in contact with the seat back in order to dissipate the crash forces.

How do you get it to fit in that backseat without pushing the front seat all the way up? Seems too big to have a passenger sit comfortably.

@CarSeatSite

3 жыл бұрын

Hi there. Sorry to have missed your comment! The anti-rebound bar only adds about 1-2" of front-to-back space, so unless your vehicle has very limited back seat space (and some of the biggest SUVs do!), there shouldn't be a problem having it fit.

I just bought this car seat but I don’t know about a rebound bar... how do I know if mine has it? And why should I use it?

@CarSeatSite

3 жыл бұрын

Hi Ana. The anti-rebound bar would have come in the box with the carseat. You can buy it separately for $54.99: amzn.to/3t1yIMb. The anti-rebound bar keeps the carseat from bouncing up and back into the vehicle seat back as a response to a crash, after the initial crash. It's all a way of mitigating crash energy away from the child. Britax actually has a good explanation here: kzread.info/dash/bejne/gKObtNxrnaeWhdY.html.

Does that bad comes with the car seat or you have to order it ?

@CarSeatSite

2 жыл бұрын

Hi Barbara. It depends. Some models of the seat come with the anti-rebound bar and some don’t. You can also order the ARB separately: amzn.to/3Es40Sf

I don't even have a baby, why am i watching this 😅

do you NEED the anti-rebound bar? if I use it I can't put my baby mirror on the headrest and be able to see my kid from the driver's seat.

@CarSeatSite

2 жыл бұрын

Hi Sarah. No, the ARB is optional. But you paid extra to have it and it's a safety feature vs. the mirror, which is a distraction and potential projectile in a crash. I would suggest that if you need the mirror, attach it to an adjacent headrest and angle it so you can see your child, if you are able.

@sumfreak41

Жыл бұрын

@@CarSeatSite In canada is it mandatory, so I would maybe add to check your manual

@CarSeatSite

Жыл бұрын

@@sumfreak41 Excellent point!