No video

Install: SPC Upper Control Arms For Dodge Charger/Challenger Alignment Fix!

If you like to help out the channel--
Cash App --$PHARRAWAYPAINT
www.paypal.com/paypalme/PHARR...
www.spcalignment.com/
www.spcalignment.com/componen...
This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our fully forged design incorporates our low-profile adjustable ball joint. These arms fit both the left and right sides.
Adjustment range: Camber ±2.00° Caster ±1.00°
Installation time: .6 hr/side
Required: 1 per wheel

Пікірлер: 7

  • @SPCAlignment
    @SPCAlignment Жыл бұрын

    FANTASTIC install video. The build looks really good. good. I am glad it corrected your alignment issue. I do have a few minor additions for the viewers of this video. The Upper control arm controls Camber and Caster angles, front toe is controlled by the OE tie-rods on this vehicle. Also when you are tightening any control arm with a rubber bushing, make sure the arm is in the position in which it will be when in the resting and loaded position. Meaning that you need to either ck up the suspension so the control arm is where it would sit when the vehicle is on the ground or lower the vehicle to the ground before the final torque is put on the upper control arm bolts. This will ensure that the bushings are not over-articulated and they will last much longer.

  • @jlpsuroeste
    @jlpsuroeste Жыл бұрын

    Nice work man

  • @JohnWD40TC02
    @JohnWD40TC02 Жыл бұрын

    Nice and easy upgrade Pharraway, I always thought a little negative camber on the front (top of the wheels tilt inward a fraction) helps with the handling🤔 but knowing me I'm wrong🤷‍♂😂John UK.

  • @geo611
    @geo611 Жыл бұрын

    Thank you so much for your videos! Will be painting a 1959 Chevy sedan delivery soon. Any suggestions on how to paint under the wings ( fins) would be greatly appreciated.

  • @PHARRAWAY

    @PHARRAWAY

    Жыл бұрын

    can you email me at pharrawaypaint@gmail.com

  • @CWood91
    @CWood914 ай бұрын

    Something I’ve wondered with these is, how does the bolt bite down hard enough on that adjustable part and so it won’t slide after a period of time or a few hard bumps? Is it groves underneath on the plates?

  • @PHARRAWAY

    @PHARRAWAY

    4 ай бұрын

    Yes they are slotted