Good video! Hope you keep making and uploading Juniper basic labs for the beginner.

Thanks so much, I have been trying to get my vcp and vfp to talk to each other with no success, but you hit it on the head at the end. Your right, very little videos out there and content to learn from, not even real books like cisco have. Getting images for gns3 has been difficult.

@regularnetworks3570

6 ай бұрын

Thanks for the kind words. Yeah I would agree, I actually made this video to help me figure it out the next time I have to do it.

Even I have persmisions to download vMX Eval, there wasn't listed 18.2 any file available to download, maybe 17.1 did show as option to download. But looking at your screen I rang juniper support. So thanks for the tip.

this was very helpful.Thank you

Thank you for sharing this video!

Thank You so much, Appreciate your Great Work.

@regularnetworks3570

2 жыл бұрын

Thanks I appreciate hearing it! I have been told that you don't understand something until you can teach it, so part of my goal is to further my understanding :)

Very helpfull thanks

Excellent videos, both this and the Proxmox one! I got GNS3 running on Proxmox, and installed and modeled vMX exactly as you demonstrated, but I can't console into either plane and it's doesn't look like the telnet ports are actually up when running a port scan on GNS3 VM. I'm on Proxmox 7.2, all the latest packages.

@regularnetworks3570

Жыл бұрын

Unfortunately I dont have any insight on Proxmox 7.2, I know there were some issues with 7.1 so I have just kept mine on 7.0 (still running debian updates though). Be sure that your processor type is set to host and see what google has to say, good luck!

Hi, I install a remote GNS3 server on ubuntu 20.04 The installation has been completed successfully. About GNS3: I choose the option: run application on remote server. I upload cisco IOS 7200 through Dynamic preference. I uploaded it and it was successful. However, I need upload image of mikrotik RouterOS and I have problem with QUEMU. Output error is as follows: error while starting MikroTikCHR7.11.2-1: KVM acceleration cannot be used (/dev/kvm doesn't exist). It is possible to turn off KVM support in the gns3_server.conf by adding enable_kvm = false to the [Qemu] section. KVM acceleration cannot be used (/dev/kvm doesn't exist). It is possible to turn off KVM support in the gns3_server.conf by adding enable_kvm = false to the [Qemu] section. When I used a local host to run GNS3, I installed VM GNS3 and resolved the problem. However, I not sure how to install a GNS3-VM on a remote server and interconnect it with it. Note: The server is a Dell R630, It has a environment that I must not affect. I was allowed to use a physical server space to set up a lab. I hope you help me

When you rename interfaces for FP rename Adapter 2 as NotUsed and start from Adapter 3 as ge-0/0/0 then interfaces will match with GNS3 when you enable to show interfaces. Well, that was actually in earlier versions. Now maybe not.

@regularnetworks3570

Жыл бұрын

Yeah honestly the naming is a bit confusing. I have been working on getting the vQFX running it has been the same headache.

for some reason mine doesnt show g/0/0/0 interfaces in the cli with the show interface terse command i get these other obscure names for the interfaces

@regularnetworks3570

2 жыл бұрын

That means your vCP and vFP are not communicating. Near the end of this video I have some troubleshooting tips (19:08 - Troubleshooting) give that a review, and if those dont help let us know! Its most likely your em1 connection is not on the correct interface. Sometimes it can take a while for both components to fully boot and negotiate with each other, espeically if your vm has little power.

@boolve

2 жыл бұрын

if it's only ge-0/0/0 not shown? So seems it just not displayed in sequence, but if you have any ge-x/x/x and you sure that you have done everything right then maybe find where in this guide docs.gns3.com/docs/how-to-guides/importing-vmx-and-vqfx-into-gns3/#legacy-vmx-the-single-vm-pre-release-versions says about in CLi root@% grep vm_ /boot/loader.conf. But this possibly was more in older versions.

@regularnetworks3570

2 жыл бұрын

@@boolve Yeah that is for the legacy vMX (14.x i think) that came on one VM. I was wrong about ge-0/0/0, it is out of sequence as you suggested but does work.

I see fpc 0 as present state for some reason not coming online connected as mentioned pls advise thanks

@regularnetworks3570

2 жыл бұрын

This means the vCP and vFP are not communicating. Its most likely the em1 is not connected correctly

Could you please tell why you choose exactly 18 version for uploading to GNS3? Do you have any insides that exactly this version good for virtualization?

@regularnetworks3570

2 жыл бұрын

It was the version Juniper supplied, which all works out. Most major features (at least for routing) have been in place since version 17.x. I have been studying for the JNCIS-SP using this setup, I will let you know if it was not adequate.

@regularnetworks3570

Жыл бұрын

Hi eugeneonline, just a quick update I took the JNCIS-SP exam last week and passed, this lab was more than enough to prepare me. You should be fine using version 18 for now. As far as I know there have not been any major changes.

@eugeneonline2010

Жыл бұрын

@@regularnetworks3570 thank you. I didnt mean to use newer version. I just ask maybe you know that this exact version is better for virtualization. Congratulations with your achivement!

@regularnetworks3570

Жыл бұрын

@@eugeneonline2010 Thanks!

Hey man I just started doing Juniper stuff and I noticed that you haven't posted in a while. I don't know if you got discouraged or something but I would love to see more content from you. Could you by any chance also show how to initially configure a vqfx switch? Thank you.

@regularnetworks3570

2 жыл бұрын

I appreciate the words of encouragement! I actually have a newborn at home now so recording is a lot harder, that being said I was planing on doing the vQFX, even started it over the weekend. Should be out soon. I am thinking of doing some BIRD IPv6 stuff for BGP and OSPF in a mixed environment after that.

@thicccbrown8849

2 жыл бұрын

Congratulations on the baby and I can’t wait to see the new content. As a guy that’s transitioning from Cisco your videos really help a lot.

@regularnetworks3570

Жыл бұрын

Hi ThiccBrown it took a while but I have finally made a install video on the vQFX! Its a pretty temperamental device but it works! Come to find out I was having a lot of trouble with a bad image. kzread.info/dash/bejne/dHqGu9OSfM_Hp9I.html

I am testing versions 20 and 18 but I can not booting up them on GNS3

@regularnetworks3570

2 жыл бұрын

You may need to downgrade your Proxmox version. There was a bug in version 7.1 (I am still running 7.0). Try installing it as a standalone VM on proxmox.

Great content over here, the video adds to your previous one on how to install gns3 on a remote server. For this video, I was unable to get the Juniper vMX 18.2R.1.9 image and could not ring juniper support, kindly help and share with me the file or an alternative link to it

@regularnetworks3570

Жыл бұрын

Hi Ashaba, thanks for the complements. Unfortunately I am not affiliated with Juniper and can not redistribuite any of their software. You will need to contact Juniper support.