Inspired Overland Rooftop Tent - Roof Rack Installation

Тәжірибелік нұсқаулар және стиль

Check out our range of the Inspired Overland Rooftop Tents here:
www.snowys.com.au/inspired-ov...
The Inspired Overland Rooftop Tent is the lightweight setup covering all grounds for off-track overnighters!
With multiple exterior entry points ensure easy access and exit, an included self-inflating air mattress and anti-condensation pad offer comfort and convenience, while two large built-in storage pockets feature removeable shoe bags to keep the hiking kicks intact overnight. Hit new heights with the included telescopic ladder with adjustable raises too - plus, a T-slot mounting base with exterior T-slots lend themselves to mounting accessories for true versatility on every outdoor adventure.
The Inspired Overland Rooftop Tents blends a slender build with ultimate outdoor durability.

Пікірлер: 15

  • @chadpowell5332
    @chadpowell533227 күн бұрын

    Thanks for your videos! Awesome to see all this before I get my lightweight tomorrow.

  • @SnowysOutdoors

    @SnowysOutdoors

    27 күн бұрын

    Hope you love it! ~ Lauren

  • @jamescoley2003
    @jamescoley20037 күн бұрын

    would you be able to do a roof install with the 23zero saber super lite? just interested to see how it goes because of its thin materials with sagging etc

  • @wildbill3104
    @wildbill3104Ай бұрын

    Is it just me or are there visible gaps between the top lid and the bottom where the rubber gasket is not touching? Some look quite large. See video around 14:12 onwards.

  • @SnowysOutdoors

    @SnowysOutdoors

    Ай бұрын

    Sorry about the delayed reply. Most rooftop tents of this type tend to have a bit of a gap in places, there would need to far more latches to ensure a tight seal everywhere. I hadn't made any effort to properly deflate the mat inside for this video either so there was a bit of upward pressure on the lid. The fabric inside is waterproof still so the sleeping area is going to remain dry. If you are in really wet weather I'd recommend using a pump to deflate the mat completely so the lid seals tightly all the way around, and avoid too much bedding inside to reduce the upward pressure on the lid. ~ Ben

  • @wildbill3104

    @wildbill3104

    Ай бұрын

    @@SnowysOutdoors Thanks, Ben

  • @OFF_THE_HWY_ADVENTURE
    @OFF_THE_HWY_ADVENTURE9 күн бұрын

    Rood bar rack is sufficient enough for the weight of this tent?

  • @SnowysOutdoors

    @SnowysOutdoors

    8 күн бұрын

    You'd need to confirm the weight ratings of both your roof bars and vehicle roof, but the lightweight nature of these tents means they are suitable for many vehicles. ~ Ben

  • @richardatkin8526
    @richardatkin8526Ай бұрын

    Did you keep it on your car Ben, interested to know if it drove okay/ weight was noticeable?

  • @SnowysOutdoors

    @SnowysOutdoors

    Ай бұрын

    I've had it on my car for the last 1-2 weeks, it is the same weight as the flat bed roof rack I took off my car to install the rooftop tent, so no noticeable difference. If anything it would be quieter on the highway as there wouldn't be as much noise going through all the roof rack rails. ~ Ben

  • @darrennorth929
    @darrennorth929Ай бұрын

    That rtt looks so thin you cant leave bedding in it. Can you store the ladder in it?

  • @SnowysOutdoors

    @SnowysOutdoors

    Ай бұрын

    No ladder, but you can fit bedding inside, check out the other videos we have shot where we demo this. ~ Ben

  • @wildbill3104
    @wildbill3104Ай бұрын

    Hi, could you please reply to my question about the seal gaps when the lid is closed. Thanks

  • @SnowysOutdoors

    @SnowysOutdoors

    Ай бұрын

    Sorry, see below (or above, not sure what order these will appear in). ~ Ben

  • @Rossi_21

    @Rossi_21

    24 күн бұрын

    yeah ben.... answers NOW NOW NOW 😂

Келесі