For best results, dust the first 2 coats on first, then do 1 heavier but light, then sand with 800 grit then give it 2 well layed coats..with 1 last heavy one ..total 6 coats. Will last forever..

If you paint any other plastic interior parts a scotchbrite with dish soap in a bucket will make it go a lot faster. It’ll deep clean and scuff them up for paint. It turned out sweet man. Gonna be doing my headliner with this stuff soon

@AaronCates

3 жыл бұрын

Thanks for the idea, I’ll use that when I do the rest of the interior! Good luck with the headliner!

@Seraphsody

3 жыл бұрын

How did the headliner turn out?

@stephenbouley6448

2 жыл бұрын

My brother-in-law does auto upholstery he always says the wipe it down really good with a clean rag and denatured alcohol it removes all those wheels and solvents like armor All and dries with no residue

@mahtoeder4756

2 жыл бұрын

@@stephenbouley6448 did you brother in law say whether or not this stuff dries and is somewhat stick or basically fabric paint

@ajhasan820

Жыл бұрын

@@Seraphsody I did my headliner about a month ago it turned out really good, it was originally ran and I painted it black

I’m in the same process of doing my 84 panels. Looks great

Damn that looks clean! Came out way better than I would have thought. I think I'm gonna do this to all my door panels and dash in my 94 impala

Wow they look awesome. Great job!

Awesome video! This is exactly what I was looking for to paint the interior of my 93 Bronco :) Thank you!

I’m fixing to do my dash I can’t wait

the king of overspray

When I need to spray downward, I always mask the surrounding area and use a pvc elbow. Just do short blasts directly into it and a low pressure area will form at the top and cause the paint particles to fall. Just don't let the paint in the elbow build up and drip.

It would’ve looked dope to leave the red carpet and trim pieces but wow I need to do this to my 84 5.0

Getting ready to do this to my 2000 s10.

@kindellhutchins5653

3 жыл бұрын

about to do it to my 99 s10!

Did this to my tacoma 98 single cab and it came out clean asf

I just saw this guy on the road so I watched his videos and subscribe

@AaronCates

3 жыл бұрын

Thanks!

Yooo it came out hella good 💯💯

@AaronCates

3 жыл бұрын

Thanks man, honestly surprised me how good they came out.

I’d love to see the rest of the interior!!! Love that generation of F150’s but that red interior was scary lol

Awesome

I just painted my full interior of my custom 81 Camaro Z28. I went with flat black. It's more like a perfect semi gloss, not flat like regular flat paint for steel. It turned out perfect. I even painted a brand new set of red door panals. I was very hesitant on this... I wanted a new black set, but red was the last set in all of North America. Due to factory shutdowns from covid bs. I did it in like 6 or 7, veeerrrrry light coats. Not spotty at all. Awesome stuff. Do not put it on thick. Super, duper light "mist" coats. Also, put the cans in hot water in the sink 10 minutes before you push the trigger. Shake can alot, or risk the whole can clogging up. I got a fan on them to cure out for several days before touching, but they were literally dry to the touch in 4 minutes of the last coat. HAPPY painting!

Do you think gloss black will be that shiny? Thinking of doing the same but with the gloss black color. All flat blacks are out of stock in here. Thanks mate!

Im wanting to upgrade the interior on my 2016 superduty, here's to hoping this video can help me upgrade from a OEM tan interior

Did you use an adhesion promoter pre painting?

How does this paint hold over time? Can it still be cleaned with products like armorall wipes? Or will it take the paint off?

Have you done any other interior parts yet? Or a video on doing so

Good job man. Does the door panel have a weird texture after the paint? How they holding up?

🔥 dope video pimp..I've got to tackle my 81 Edog with WHITE paint..unfortunately my door panels are white,and I found to clean brown door panels that will do the job..preciate the lesson plaboi 💯

Wow this gave me courage now to paint my door panels from black to palomino color now I don’t know to go with sem or dupli color . Has the paint stayed on ? It hasn’t chipped off ?

Gonna paint my armrest black to make it look newish.

I’m buying a ‘23 Ford Maverick and I want to paint the interior black, this makes me feel better to try it out

You should try one more layer bro . ( inside the cracks/ deep lines ) And I think you could get inside the door compartments if you just held it my hand and sprayed inside .

What is the texture like once dry? Feel like the ordinal vinyl? Or is it rough?

Update video on how it looks now?

doing this to my dash on my 08 sierra

You think the beige color will get cover good on black?

Did you do the carpet as well ?

Hi could you load some photos of panels in the present?

Just curious, how did they hold up?

If your still answering questions on this video how have the held up over the last 5months no flaking or paint chip?

I bought an 82 S-10 to flip a while back and I had great success with the Duplicolor plastic paint. The truck sold the day I listed it and I wish I had kept his contact info to check in with him later to ask about how well it held up. I almost used Duplicolors adhesion promoter as a primer, but my budget for the build was small and I wasn't sure how much (if any) it would help.

Can you please show the results from all this time?

Pro tip: use a brush on the carpet after spraying to make sure you got all the fibers and spray again, repeat.

How does it feel. Sound rough when passing your hand over it.

very many videos!

Can’t wait to make my ugly tan interior a black masterpiece

How well does this work

Whyyyyy that red interior is dooope

What’s the update now I want too do mines just want too make sure everything goes well

Try that years ago on a van and had the turquoise interior I did the black vinyl paint we scrubbed it we cleaned it we everythinged it,and it rubbed off

@AlexDeChristian6323

9 ай бұрын

I just did the two front panels of my Kia optima two days ago and the paint is already coming off and bubbling, I ruined my door panels with this crap, never again.

@davidgentz1731

9 ай бұрын

That stuff is a joke

I was just wondering how well it has held up? If it wears off easily or stays on pretty strong

@MrTheHillfolk

Жыл бұрын

Years ago a buddy redid his interior ,and used the spray vinyl/carpet paint. Even on the vinyl seats it held up to daily use for a good 3yrs of beating on it.

@chazness9285

Жыл бұрын

I did this to my god awful red interior on my obs. The only place I’ve had issues with the paint is on the kick panels from boots ect. But all in all it’s a pretty good product I’d say

Hey! How is it going so far?

You can switch the tip to different direction for spray better

I recently painted my truck door but it is very easy to chip the paint. I tried putting clear coat over it but it doesn’t help. How can I strengthen the durability of the paint and what would be a good protective coating to put protect it?

@TheRoadhammer379

3 жыл бұрын

Don't use paint, use spray dye, which this is. The best brand is VHT, and do not use primer as these products need a molecular bond with the panel

Can you spray that over suede?

pretty late not sure if anyone can help. but i bought a truck . the interior was painted black. it’s been done very poorly. what do i have to do to the panels to prepare them for a re spray the correct way

I tend to put to much paint down when spraying and get runs.

Did you use gloss or satin or matt finish? Watched the whole video but I think I missed it! lol

Any updates, has it faded, come off etc?

Hopefully your panels are holding up. I’ve done this before and found adhesion promoter before paint works well

@AaronCates

3 жыл бұрын

I’ve had a couple small spots where it’s started to come up, will have to redo in the future and try out adhesion promoter, thanks for the idea!

@stanleysgill

3 жыл бұрын

I was going to ask how it's holding up. I have a 05 f250, and hate the stock shade of tan. Want to change the tan slightly and add black. But, wondered how painting them holds up, if it is worth it. Other than haveing no choice like you

@massivepump3059

3 жыл бұрын

@@AaronCates I’ve seen a video where the guys been doing it for years. He says the most important part that makes or breaks it as far as longevity is patience. He does like 6-7 coats but the first 2-3 he barely dusts the color on and let’s it fully dry. It gives the other layers of paint a better sticking point. When you did yours you layer it pretty thick. They did look amazing but as you said it didn’t last. Give the low coverage multiple coats a try.

@kylerrhys8733

3 жыл бұрын

@@massivepump3059 can you tell me what video that was? I’d like to check it out

@massivepump3059

3 жыл бұрын

@@kylerrhys8733 I can’t remember the name Of the channel. The host was a middle aged white guy and he kept stressing the patience and multiple small coats. When you find it you’ll know because he says it a million time. Search for spraying interior leather. He was working on a center console for a truck spraying it grey

how does it hold up after two years?

How did the paint hold up?

How does it hold up

How many cans you used on 2 doors?

Did you use clear coat on it

I accidentally didnt use adhesive or primer and its chippy. Would i use like some aircraft paint remover to get that spray paint off so i could start over?

@AlexDeChristian6323

9 ай бұрын

Me too, I painted the two front door panels just two days ago and they are already chipping off the paint is coming off like sheets off the panel, horrible, there is definitely misinformation about the use of this product, I should have left them alone, my door panels are now ruined.

It’s been about a year, would you care to make an update video or share photos of how it’s held up?

But did it last?

Should have left them all black. Next time you tape something off also cover up the other exposed areas either a sheet or something. This way you don’t get a bunch of overspray.

👍👍

Is this gloss black

did any of the paint rub off yet?

I can’t see the cracks from my house (; do dont worry about it lol 😆👍🏼👍🏼

did you use any promoter? and will it scratch easily?

@mblake0420

Жыл бұрын

Yes, it's terrible

While it hurts me to see you painted over the red, at least you chose a good color to go over it

I saw u at the gas

I really thought they would come out looking tacky but you did a great job 👏

@jakefriesenjake

2 жыл бұрын

Not tacky. Gloss black looks more fake. I went with flat black. It's more like semi gloss. Looks amazing on my 81 Z28.

@carlosherrera8541

2 жыл бұрын

@@jakefriesenjake I agree. The flat black looks way better than glossy painted interior panels lol

How long till the smell is gone?

how does the fuzzy part of the door feel after the paint has dried?? is it still soft or does the paint make it solidify and get crunchy? lol ...I have a 92 bronco that I am trying to revamp the interior and I have the exact same door panels except one is gray and one is tan so I am trying to make everything tan

@AaronCates

3 жыл бұрын

It’s not as soft but it is also not crunchy haha it’s a little in between. But after the paint has dried if you run your hand over it enough it softens up a little bit more.

@shanehardesty44

3 жыл бұрын

@@AaronCates good to know, and all you used was Comet to scrub down the parts?

@AaronCates

3 жыл бұрын

I sanded them then washed them with normal dish soap.

@MrTheHillfolk

Жыл бұрын

I did the carpet on the stairs leading to the basement in my old house. As we were moving out we painted the place, and one of my buddies spilled white paint all over the steps. Off to AutoZone for 2 cans of black carpet paint. Came out great ,doesn't wear off easy and the carpet feels like carpet (except where the real paint dried)

👍

Rustoleum makes a plastic primer you should try on the door panels before you spray them

Is it sticky

Is it gloss or flat paint

I scuffed and preped my door with the wax and grease remover and when i was spraying it with the flat black it started looking like ashy on some parts do know why did you have this same problem

@AaronCates

3 жыл бұрын

I don’t know why it did that, I didn’t have a problem with mine.

@Ezeke_

3 жыл бұрын

Aaron Cates yea im not sure i applyed a couple extra coats and and it still doing it

I have a VW Rabbit and the flimsy fabric comes unglued. I'll be painting my panels.

Gotta prime first

Is the splatter paint thing still a thing

@AaronCates

3 жыл бұрын

No that died right after high school graduation 🤣

How is it. 1 year later?

Do you need to use primer before painting ??

@TheRoadhammer379

3 жыл бұрын

Absolutely not, it's not paint. It's a dye, primer will cause it to chip and flake, as it has to molecular bond to the panel

@BillyRay501

3 жыл бұрын

@@TheRoadhammer379 so is paint better

Really could've done it all in a day bro. The sanding was good but washing and waiting to dry for 4 days wasn't really necessary

Hows this look today

I used to Rustoleum, Krylon and Duplicolor was shit from my experience. Not to mention far more expensive.

what song begins at 8:10

Paint the insides of the door while up right lol

At sunoco

Man my concern on doing this is: How long does it last?

@noahsmith6520

2 жыл бұрын

If there would be some kind of clear coat almost that would be best to put over the top so that the paint wouldn’t wear off and for the fabric I would use a fabric paint just for the fact that it will hold the color in the fabric better and last longer

@IDABAYAREA650I

Жыл бұрын

*Id say EXTRA PREP The areas that are going to get A LOT of contact like the door handles and arm rests on the door panels*

No primer....... How's it holding up?

@AaronCates

3 жыл бұрын

Still holding up good

@jakobiwells1718

3 жыл бұрын

I would use an adhesion promoter

@TheRoadhammer379

3 жыл бұрын

Primer is not recommended, as this is a dye not a paint. Primer will cause it to chip and flake.

Thats gunna flake off in a month, watch

For the plastic and vinyl use plastic primer before putting on the actual paint

@TheRoadhammer379

3 жыл бұрын

No, you don't with this product. It's not paint, it's dye, it molecular bonds to the panel. Using primer will cause it to chip and flake. My brother has been using this stuff for years at Ford, this is what dealerships use to alter interior colors.

You supposed to get some ugly grey ones to paint and sell the red or blue ones.

from original red to boring OEM black

@blackraven8841

3 жыл бұрын

Honestly would've painted the plastic bits black to give it an updated look and keep the red for a sport look

This does not work very well did this on my boat and came off flaking after 3 uses. Just a warning try it on one section or panel see if it lasts then do the rest TRUST ME

What a mess,,

Good job ...terrible music