Remember guys always keep that tip clean

@MR.YEAST69

2 жыл бұрын

I told her just the tip.

@eazy2hate

Жыл бұрын

Remember guys hector just had to state the obvious! Lmao this is an unspoken rule literally everyone knows this!!! Hector is slow!! Took hector LOOOOONG time to figure this out!! Hector is special! Hector like Jane!!

@bruceleeupk

Жыл бұрын

Giggity

@zaheerdawood3814

Жыл бұрын

And if the tip does ever get dry make sure to spit on it.

@owenmartz4700

Жыл бұрын

😂 facts

Over the years, I have found that prep is super important!!! I strongly recommend SEM aerosol & ADHESION PROMOTER!!!! I have jobs/ favors done 10-15 years ago that are still looking like new, and zero fading or edge peel!!! My 94 toyota 4x4 needed an interior part replaced, but I couldn't find grey part. So I bought a blue used piece,and sprayed with Presidio SEM... 19 Years ago..... Part still looks new!! I haven't used any sem or duplicolor on carpet yet.... But I bet it would work.... My 2¢ worth😎

@tzkxua1011

5 ай бұрын

do you apply the ADHESION promoter on first or after u paint it?

@rickbalderas7153

9 күн бұрын

@@tzkxua1011 before the paint. Its so that the paint ADHERES to the plastic

Great tutorial - thank you! It’s great to see someone teach the importance of putting on so many light layers because if you don’t, as has already been said, the paint will not stick and eventually it will stay to bubble up and peel. I’m saying this for people who haven’t done this yet and have watched other videos with guys putting on 2-3 heavy coats.

@user-fc1zs1wh9g

3 ай бұрын

well never let this guy un snap anything from ur dash or console cant believe he didn't break any clips ... need to learn how to take it easy damn

@bodeine454

3 ай бұрын

When did he say that if you put it on too heavy that it will bubble and peel? He didn't, he just said that you can't rush this and spray heavy coats and never explained why. That's one of my biggest pet peeves about someone trying to teach other people how to do something properly. Instead of just telling everyone that you can't rush it and not to spray heavy coats he should have explained why you cant, not just that you simply can't.

Great job. Isn't it amazing when someone shows a little tender love and care for their property. And it didn't break the bank restoring the console either. Anyone can do it. You do not need a degree either.

Incredible job. I really like the before and after.

I did the same thing to an 05 Lincoln town car console and it turned out very nice. Duplicolor works very well on plastic.👍

@NoSoyYo-TV

Жыл бұрын

Flat or glossy ?

I re-sprayed my truck's vinyl back seat but I used "Rust-Oleum's Fabric and vinyl" and it turned out pretty good. I kept the truck for 2 more years after the re-spray and it didn't rub off nor anything. I'd definitely recommend it to anyone that doesn't want to spend hundreds in a dedicated shop.

@Shoptoolreviews

2 жыл бұрын

Thanks for sharing. That's exactly right. A little labor time and you can get very good results. Thanks for watching.

@strider5119

2 жыл бұрын

I can confirm Rust-oleum is good paint. I used some to camo paint one of my rifles and I've had that barrel too hot to touch many times since, no fading. Great stuff

@JSTRAK-yl8bq

Жыл бұрын

Did it by chance leave a spray paint oder in the vehicle after you painted over everything??

Thanks for all the tricks and tips. I’ve always wondered how shops always made the job look so nice and easy.

@Shoptoolreviews

2 жыл бұрын

You are so welcome! Thanks for watching.

Great job. I have a 96 Chev S-10 that is trashed and this video is really going to help me get it back in shape. Thanks !

Great job! I did a total interior color change on a gmc Sierra slt years ago. It had an ugly blue interior and I changed it to a beige. I did basically the same thing you did in this video. I took the entire interior out and dismantled everything before I re dyed it. I did outsource the upholstery as I went with new leather for the seats though. It all came out amazing! I loved and had that truck for years until I sold it to help buy a new one.

@Mauryan510

2 жыл бұрын

Did it hold up well?

@number1pappy

2 жыл бұрын

@Kobe yes it did! I had the truck over 11 years after I did the re-dye color change. One of the cool things about it was I could even use vinyl Protectant on it and it responded exactly like original vinyl! The stuff is amazing! When I did it ,I told myself I didn't want any over spray or anything that would give it away as a cheap re- dye. That's why I did like he did in video. It is a huge pain in the ass as you'll be surprised how many small parts there are. I personally never could find any info on how to take apart or put back together all the interior parts so I just took a lot of pictures and made notes when taking the console ,dash,steering wheel etc etc etc....you get the point. Anyways if you take your time and do multiple thin coats you'll be ok..

Love the refresh job. As for replacing the black pieces. A little red-neck trick i do is an old shop rag with some automatic trans fluid. It REALLY makes a difference. Just a little bit of oil on the rag. Rub it in. Bam its clean and refreshed

Thank you sir, very detailed video! I was actually intimidated by taking on this project now I feel way more confident.

@Shoptoolreviews

2 жыл бұрын

Great to hear! Go for it! Remember, clean, clean, clean... Thanks for watching.

I really like how this came out. In fact, your instructions were so on point I really like how mine came out. I found that I didn't need the 4th or 5th coat(for my project). After 3 I was impressed. Great vid, thanks for your help!

@Eric-fs3rk

Жыл бұрын

Did you add any clear coating?

@silvestrelomeli6750

Жыл бұрын

@@Eric-fs3rkyu have to add some type of clear coat

Thanks for the insightful tips on clean and prep. Good info on cleaning the tip of the spray can nozzle, I’m sure that apply to guns as well. My 97 Dodge Ram dash assembly failed from Florida Heat and poor abs plastic formulation. Not only was the dash top cover cracked and brittle but also the dash sub core assembly. I found a sub core assembly on EBay that was not brittle. So I prepped the backside of the plastic with 2 part epoxy resin and fine weave fiberglass cloth. You clean with acetone and then use an 80 grit abrasive sandpaper to open up the pores of the abs plastic, clean again with acetone, let set to for at least an hour ( it’s warm in S Florida) to allow the acetone to throughly dry, then do a bonding layer of 2 part epoxy. Shortly thereafter ( still tacky) followed by a layer of cloth and more epoxy to saturate the cloth. It was very time consuming, but it should not crack again 🙏🏻 and it feels very sturdy. I am now going to use the Duplicolor factory matched mist gray to color the dash. You can find the interior trim color on the door panel ID sticker. I talked to Duplicolor and unfortunately that trim color was not available in the spray can, but they sent me the formulation and directed me to a Duplicolor paint shop that could mix it. It was expensive, like $54 for a pint. I’m getting ready to paint it this week and appreciate the prep and application tips. Thanks

Wow. Looks awesome. You did a really good job. And the instructions were spot on

"Pretty well" is an understatement . That was phenomenal . Good job !!!

Well done! Looks brand new!

Did half of my cars upper interior 3 years ago, came back to give a little advice & update on it. Well it’s still in good condition. Highly recommend not using those autozone cleaners to clean the parts you painted when it gets dusty from experience it gets faded and the color under starts to show if you rub to hard. “ I usually just touch it up again and it looks fine “ other than that this stuff is amazing. Even after years of sun exposure it’s still yet to crack or chip, no fade or any major problems.

Great job! Gave that old console new life!

@Shoptoolreviews

Жыл бұрын

Thank you.

Hell of a shop man. Thanks for the video!

That is so inspiring definitely going to start this project soon thank you

Did this on a car before even seeing this video. Very light coats is certainly key when painting these, especially the plastic parts around the ashtrays that might have coatings on them (certainly test paint those first). Did mine in grey and black, the ashtray needed to be sanded with fine grain paper to get some kind of coating off the plastic, paint caused the coating to disintegrate. Couldn't get some of the burns or stains cleaned out of some of the darker plastics but the paint hides them to the point nobody would ever notice. I used a light grey and dark grey satin paint and it came out great. But very light coats is for sure the key to getting a nice even coat without runs, bubbles or dust spots...

Im so glad i watched this. Thank you!

We ordered and installed new carpet on a 2015 Tahoe it made a huge difference. Yes all the seats and center console have to come out and don’t forget to vacuum the floor since nobody will ever be there again

Wow looks great. Very labor intensive.

Thei brand is really good. On my BMW 7 series I wet sanded the door sills. After washing I added 3 coats of plastic paint adhesive. Did 7 coats. Came out really well. Here in Arizona 1 minute paint was dry.

Have a similar console with same color to paint so thanks. The regularly clean the time was a duh moment. Definitely will do that.

Great video followed yr instructions and clean perpetration is a must. All turn out like new. Colour was black same product as yours good quality.

Thanks for the video. Might try that myself on some panels. God Bless brother!

I have a 92 yukon 2 door you are gonna make me take my center console out and all my other plastics and repaint them that came out killer thank you for the video

@Shoptoolreviews

8 ай бұрын

Or you can just sell us the 92 Yukon and we can handle it. Thanks for watching.

@warrenshattuck7547

6 ай бұрын

Make me an offer worst I can say is no 😂

Best video so far on this subject Thanks for sharing Attention to detail

@Shoptoolreviews

Жыл бұрын

Glad it was helpful! Thanks for letting us know and thanks for watching.

Nice work! I done my whole interior paneling in a black from grey on a 05' Blazer 4x4 Red 3M scratch pads And degreaser If you spray vents Make sure you move them around with each layer added Tip for carpets ...Always do a light coat ..Let dry, Use a brush And Brush the carpet left right up down ..The idea is You want loose flowing carpet And not glued together rock hard carpet ..Each coat repeat I done 4 coats to mine ..Never know i was there

@Shoptoolreviews

2 жыл бұрын

Thanks for the feedback and as always, thanks for watching.

@imnota

2 жыл бұрын

How long ago did you do it and how is it holding up ?

@freakyflow

2 жыл бұрын

@@imnota About 2 years ago And been wiping it clean with normal cleaners and water No rips or chips / scratches Or fade .....Tip is above post And Dont gunk on the paint You are Better off with 3 to 4 light/med coats Then 2 heavy coats The other tip is 3 second long sprays ...Longer And the paint spurs out leaving drops of paint ...I am sure you are better than that But i have seen nightmares lol Good luck

@imnota

2 жыл бұрын

@@freakyflow Yeah I was thinking of doing thin coats anyways to avoid getting a shiny surface. I actually have a good bit of experience painting other things so I think I'll have the technique pretty well, just didn't know if it was a good product and if it's even possible to get lasting results on these type of materials. I also thought of using a plastic adhesion promoter as some people recommend it for this but I'm not sure since the brand themselves don't say it's needed plus they say it's a dye, not paint...

@freakyflow

2 жыл бұрын

@@imnota Only time i seen a shop actually use adhesion promoter was with insurance jobs which would only do one thing ..Ring up a higher bill $35 in parts $75 in labor $22 in environmental fees / Disposal of chemicals Which was some guy with a spray can throwing on a light coat of Adhesion lol I never used it And i know I can run my finger nails across my dash And not worry about it coming off ..Just make sure you do the sway painting motion I done mine on a nice sunny day with no real wind

Thanks for uploading this, it will be a big help when I do my interior work.

@Shoptoolreviews

Жыл бұрын

Glad it was helpful!

Your video taught me so much. Thank you.

I used this stuff religiously,the black spray works great with those other panels,also works really good on carpet.made the interior of a old beater 1992 4x4 splash ranger look brand new.The only thing is when spraying commonly touch areas like arm rest or door trim where you rest your arm you HAVE to prime it,other wise in about 3-4 months it will start to crack and peel. Scuff,clean,scuff,acitone,prime,LIGHT scuff,And about 5-6 "dusting"coats of top paint

@cesarbaretta4050

Жыл бұрын

What primer did u use?

@NoSoyYo-TV

Жыл бұрын

Glossy or flat black ? For the panels

Some great tips mate cheers. Great content.Greetings from oz

A must before all of the aboves, great stuff used it to prep/piant pvc outdoor furniture...SEM 38353, Prep plastic&leather🙏

Loved this video! I’m about to do this swap in my Silverado from a jump seat to the console. The donor console is light gray but my interior is dark. Thanks so much for the step by step!

@Shoptoolreviews

2 жыл бұрын

Absolutely, and we can't stress 2 things enough: clean clean clean, and very light coats. Hope it goes well for you.

@diedfrombored5295

7 ай бұрын

I'm going to do all the interior plastics in my 04 Silverado too, gray is so boring and depressing, I want a nice light brown. I miss the old days when you could get a nice monocolor interior like brown, and maybe some things would be a slightly different shade of brown but those interiors were the absolute pinnacle of American vehicle interiors. Gonna replace the carpet or just spray paint it if that's a viable option same with the seats. It'll be a breeze compared to all the other stuff i've done to my truck.

Nice job it looks so much better.

@Shoptoolreviews

2 жыл бұрын

Yes, it turned out very well. Thanks for watching.

Thank you very, very informative!!!! Really appreciate your video!!!

I’m fixing to try this on a hot rod project over on my channel. I sure hope it works out for me. Thanks for sharing. -Spanky

Great! Well done - thank you so much.

Excellent, enjoyed that, keep up the good work, liked & subscribed 👍

I did this to some rear plastic bumper guards that sit on top of the Chrome rear bumper for of a 2006 Nissan Frontier. Ohh My, what a damn difference it made. I was also able to do the long plastic piece that sits over the Wipers know as the "Cowl" I swear painting these plastic faded pieces bought back that frontier to a whole "New" Level. Great Demo and Step By Step. Thanks for sharing :o)

Awesome 🤩 very informative on point bro 👍 thank you

Ficou muito bom! Ótima vídeo! Estou pensando em pintar as partes internas do meu Fiat Palio Weekend. Muito obrigado pela explicação. Muito sucesso, saúde e sorte e um abraço do Brasil, Rio de Janeiro, Nova Iguaçu.

Thanks! I thought I was going to have to buy brand new plastic. Just ordered the paint via your link.

I’m looking to upgrade my semi truck interior but need to do it on a budget. Great video!

@st-qd8wg

3 ай бұрын

I'm in the same line carrier. I hope you got painted. If you are interested, co driver, let me know 🧑‍🦰🚚👩‍🦰

I have used this and the VHT and have gotten great results with both. I was painting the harder 90's toyota products, but have not had any issues with peeling and seems quite tough.

@AmbientShades

Жыл бұрын

Did you go with the same color or change it out? I want to repaint the interior of my 02 Tacoma but I want to do it in gray instead of the tan/brown factory. Trim pieces are insanely priced so if I can just paint it would be much cheaper.

@ramonrincon8078

8 ай бұрын

Did you add primer or just sand n paint without it ?

That looks great! Thanks for the lesson.

@Shoptoolreviews

Жыл бұрын

Any time! Thanks for watching.

Outstanding. Thank you.

Im going to try this in the old truck this weekend.

Great tips! Thank you!

Looks great!

I thought that turned out really well , and a nice colour into the bargain . It just so happens , i painted part of my rv dash , a couple of weeks back , after i converted the radio aperture from single to double din . I've not got a hope in hell , of matching the original finish , so i've decided to Hydro-dip with a wood grain . The panel is sitting in the garage , painted in a suitable base colour , ready for the final film . Unfortunately this has being delayed , due to the supplier running out of the film , i'm gonna use . As for the black panels , i use a plastic refinisher , which i believe is American in origin . It's meant for bumpers , but i've painted pretty much painted , all the faded plastic under the hood . The finish is excellent . Little postscript here , the colour used to paint this dash , is the same colour as my carpet in the rv .

Amazing difference great job. Always clean the tip, just the tip, after spraying.

@Shoptoolreviews

2 жыл бұрын

Thank you very much. That's right. ;)

@americansfirst1095

2 жыл бұрын

If a person has a paint shaker.....use it on all spray cans of any kind. The improvement in quality is amazing. (I just happen to own a paint shaker).

@tlaxcalagg1458

2 жыл бұрын

That’s what she said

@matthewryan7374

2 жыл бұрын

That's what she said

@cody2097

2 жыл бұрын

That's what she said

Amazing.... unique color

Great job thanks for sharing !!

Keep up the good content👍

@Shoptoolreviews

2 жыл бұрын

Appreciate it. Thanks for watching.

Looks amazingly better. The black stuff could just be sprayed with some flat black since its a work truck. If your really worried about the cupholder area try some bedliner rattle can. Its add some material but gives rubbery texture to keep the plastic from getting scratched or cracked.

@gerryaustin8687

2 жыл бұрын

Im new to this, I was wondering if Back to Black would work?

Thanks for the tips👍

Very helpful thanks 👍 working on my 69 ghia that I saved from the crusher. This is what I need to do to my Yukon Thanks 👍

Damn! That's a pretty good job

Very cool repair！　cool！　　素晴らしい！

Looks great 👍

Great video bro 👍 👌 👏 💪🏽

Excellent! Im going to change a 92 f350 blue to the same colour you used and accent it with real teak wood finish. Is this paint uv protected?

Several mist coats really makes a big difference. Great results.

Thanks for the video.. I can't believe you sprayed that with your watch on... : )

@Shoptoolreviews

Жыл бұрын

Glad you liked it. I've worn this watch for years and I rarely take it off. I keep a screen protector on it and clean it when it needs it. Thanks for watching.

Super helpful video and also very clear and simple instructions! Can I do this on my dashboard too? I'm worried about the sun on it - I use a windshield cover sometimes but not always

Nice work TJ...🏁 19:40... McGuire makes a good black plastic rejuvenation liquid...Eastwood has a fantastic black plastic interior paint that would make it look brand new.. Powder laundry detergent is the best cleaner for this stuff... then go back with alcahol or acetone to wipe free of containments....imo

I've used this stuff on vinyl for years. A while ago, I was getting my house ready to sell and doing painting in the basement. Well, my buddy stepped in the paint tray that was sitting on the stairs. Cheap peppered black and white carpet, but it looked like hell with white paint spilled all over. So I get a bright idea and run to the auto parts store and get me 2 cans of black vinyl and carpet paint. It worked great, carpet still has the plush feel (except where the real paint was) I'd definitely try it on a ratty old carpet that needs help.

@Shoptoolreviews

Жыл бұрын

That's awesome that it worked for you. Thanks for watching and sharing.

@MrTheHillfolk

Жыл бұрын

@@Shoptoolreviews thanks man, this is some good stuff.

Excellent!!!!

Nice video. Thanks for the detailed prep and painting explanations. Did you wait the same amount of time on all the re-coats?

Great work 👌

@Shoptoolreviews

Жыл бұрын

Thank you so much 😀

I'm gonna do this to my tan 09 vic interior and switch to black. I ordered the duplicolor but I also ordered some rustoleun the make a plastic primer that should help adhere to the door panels and make them not scratch very easy.

Awesome job.

@Shoptoolreviews

2 жыл бұрын

Thank you, we appreciate that.

Great job. Question is there black color for the black color pieces?

Great tips.

You dont have to varnish them? I m trying to do the same thing with my sunvisor , a b c pillars, handles and i m curious if i have to use primer first after paint and in the end varnish. Whats ur opinion?

Thank you great job 👍👍

Good job!

Beautiful

Perfectly done. How does that stuff hold up quality wise??

Great video....very interested to know though how resistent is that finish to day to day scratching or knocks?

Great job nice 👍🏾

Question truly is does it hold up to wear? Willing to try. Used other products and look great but just everyday wear removed. Love to see update thanks

Excellent job! As for the blacks you can use a ceramic coating to restore, a torch will also help or just simply re spray them as well

Great job, Disassembly and cleaning with light coats at first is so evident in the finished Factory look product.. Looked like the clownsmugglers prior painted it while driving, Fantastic resto!.. Can the black be reliably sprayed?

Awesome 😎👍.

Good job 👍

Thanks for the video. Can I use the red scotchbrite pads? Or is it to course?

Good sharing

Looks great. What's the little plastic crowbar called to pop pieces apart?

Wow, that’s nice

I want to do a two-tone color job on a motorcycle leather jacket- do you have a favorite masking tape to use for a clean line? Thx for your help, these vids are great!

Good 👍 job man

Thanks for the tips Tim. I’m gonna try a color change on my 2011 Jeep Wrangler. Split color of Black and Tan and I want all black. Wish me luck.

@Shoptoolreviews

2 жыл бұрын

Take your time, make sure it's clean clean clean, and use very light coats. Thanks for watching.

Nice video!!

Thanks man!! With that watch on though, is crazy 😂

@Shoptoolreviews

Ай бұрын

Glad to help. I get that a lot about my watch, but I buy a watch...to wear as a watch. If I can't work in it, then it's probably not for me. It's held up great for years, but I did just replace it. Thanks for watching.