Thanks so much for making this vid. I just picked up the chassis and this vid really helps. Thanks man

@rcfungames

Жыл бұрын

And I am so glad to hear that the video was helpful 😁 Thank you, and thank you very much for watching and commenting 🤜💥🤛

WoW!!! Amazing up-grade! Almost nothing from Traxxas in that Traxxas HéHéHé

@rcfungames

Жыл бұрын

Thanks bro 🤜🤛 definitely getting close to being able to build 2 stock traxxas TRX4M'S.😅 It's been so much fun to upgrade them🤘😁 You have a good Friday my friend 😉

@pandacrawler6x6

Жыл бұрын

@@rcfungames HéHéHé!!!!

Great looking kit. And so is your running test. I think it's really worth to build it into the 4M. Thanks for showing.

@rcfungames

Жыл бұрын

Really appreciate that bro 🤜🤛 Definitely it's the way to go, now I'm going to do the Last upgrades that I've had sitting here for while. Then I can build two stock traxxas TRX4M'S 😁

Great instructions on how to do the job👍💯💯 Really appreciate all the work you go through to make our lives easier 😊 Thanks so much 😁🤙 Continue the excellent work 🔥🎥🎬🔥

@rcfungames

Жыл бұрын

Hi Sophie 😉 It's always great to have your visit 👍 Thank you so much, really appreciate the support, view and comment 🤜💥🤛 😉

Great upgrade and video, I like the test drive after installing 👍🤠

@rcfungames

Жыл бұрын

Thank you so much Mike 🤜💥🤛 I have put a lot of effort into these little crawlers from Traxxas And they are amazing to play with. Thank you so much for the view and comment 👍👍👍

Good video on how to do the swap. My Injora Chassis comes in today so can't wait to get it set up.

@rcfungames

Жыл бұрын

Thank you I really appreciate it 👍It's definitely one of my favorite upgrades so far, and it was a lot of fun to install 😉 Though I will point out it catches on the brace inside the Bronco body, I haven't trimmed mine yet, but it does cause the body to want to come off Will make a video on it shortly 😁 Really appreciate the view and comment

Great detailed video! Thank you

@rcfungames

11 ай бұрын

Thank you bro! It's a pleasure ✌️😊 I really appreciate the feedback 😁👍👍👍👍

Injora definitely has some interesting parts, I always enjoy watching your content 👏 I bought a trailer and tow hitch combo for my Ford Bronco and Trx-4 sports from that brand

@rcfungames

Жыл бұрын

Well so far I've been well impressed with most of their products, so I'm sure you won't be disappointed 😁 I really appreciate the support view and comment 🤜💥🤛

Very good design work👍👍

@rcfungames

Жыл бұрын

Thanks bro, really appreciate it 👍👍👍

Thnx Bro! Delicious Video. Just got mine, and not that I couldnt figure it out > but I appreciate the shortcut mode. Now I can spend the time I would of needed to focus on the 5 bags of parts; and get this aluminum gearbox in my Losi Drag Car. You saved me a couple hours Indeed.💪🏼

@rcfungames

Жыл бұрын

It's a pleasure bro, I'm glad it's saved you a couple of hours ☺️ Sounds like you've got lots of parts and lots of work to do 😁 Hope it goes well, 🤙 Thanks for watching and commenting bro🤜🤛

thanks, needed some assistance getting it started. we have a lot of the same parts including wheels and tires ;)

@rcfungames

Жыл бұрын

Hi bro 👋 I am glad it helped ☺️ Cool, so far I am loving the Injora upgrades 💯 Thanks 👍

Hello, Big Like!👍💯Have fun with the hobby!👍 Greetings Seven🖖

@rcfungames

Жыл бұрын

Hey buddy 👋 Thank you so much man ✌️😉 I definitely am having a blast Can't wait to start building 2 stock traxxas TRX4M'S from all the original parts. Greetings Ryan 🖖

@SevenWelt

Жыл бұрын

@@rcfungames 😃

@rcfungames

Жыл бұрын

@@SevenWelt 👊😉

Good job!

@rcfungames

Жыл бұрын

Thanks bro 🤜🤛 It's so much fun to work on the Traxxas trx4Ms 💯

@skorpionman67

Жыл бұрын

@@rcfungames 👍

Super 👌 vidéo 📼

@rcfungames

Жыл бұрын

Thanks Sebastien 👍 really appreciate it bro🤜🤛

@SebastienMongecadet-rq8vq

Жыл бұрын

Merci pour ces belles vidéos qui font très plaisir

@rcfungames

Жыл бұрын

@@SebastienMongecadet-rq8vq thank you so much my friend 🤜🤛

Nice straight forward video. I may have missed it because I was watching in a loud place, but what do you think of the chassis? Is it worth the upgrade?

@rcfungames

Жыл бұрын

Thanks bro, personally I don't think it's worth the upgrade, it just messed up how the body clips on and you can't really use all the holes because of catching the shock towers on the body and the links at the bottom push against each other in the front restricting the travel. 😉👍

Nice and detailed video, but this chassis is for Defender. The chassis for Bronco has different schock connection

@rcfungames

8 ай бұрын

Yes but this was when they first launched the carbon fiber chassis and it was for both before they did alteration And thank you very much I appreciate you watching and commenting .

someone needs to do an injora kangaroo chassis build. i want to see one before i buy one. this video makes me confident its a quality chassis though. thanks for the good content

@rcfungames

Жыл бұрын

I haven't tried one personally but I've heard they not bad at all I will order one soon and give it a try 😉 Thank you very much I'm glad you liked the video 🤜💥🤛

@jakedavid8187

Жыл бұрын

​​@@rcfungames yo... so I ordered the kangaroo chassis and il let you know how I like it. If i knew how to edit video id do a review... Do you think the carbon framerails feel as strong as the steel? Thats been the only thing holding me back from buying this chasis

@rcfungames

Жыл бұрын

@@jakedavid8187 hi bro, that's cool, I'll be looking forward to hearing how that Chassis performs! Editing bro I also didn't know how but with a bit of time and practice you get better quickly got to start somewhere 😉 Look it's not that stiff as the metal chassis, but once it's all assembled I've had absolutely no problem.

for some reason i cant get the body to clip in its hitting the stop of the inside of the truck but the chasis is on right so im lost

@rcfungames

8 ай бұрын

Have you got the same chassis that I used on this build! Because when I purchased these chassis they we're selling this chassis for both rigs the defender and bronco! They ended up changing the design on the chassis for the Bronco it's got a cutaway so that the brace that goes between the fenders on the inner part of the body doesn't push up against the shock towers! I eliminated this problem by cutting the piece of brace between the screws under the bonnet which then allowed for it to be able to clip on. I hope this helps you

150. Still too many 'GUYS'. Otherwise, good stuff. I will be purchasing this carbon chassis soon, for my second TRX4M Bronco...

@rcfungames

5 ай бұрын

Lol, I promise it gets better these are still videos from in the beginning of the year! I was still struggling with words 😅 Hopefully the later videos are better let me know once you watch them. And yes definitely worth the upgrade in my opinion!

@Friskee62

5 ай бұрын

No more, "Guys"...very cool. Still following your vids...@@rcfungames

How did you get the binding issue fixed so the shocks would move freely

@rcfungames

4 ай бұрын

Well at this point I was still running the original shocks and they not as good as an upgraded version but I had to put the shocks in a more upright position to avoid binding on the front and rear suspension. In the future I tried 59 mm shocks which caused issues again on the front axle so I went back to 53 mm shocks from Injora and I put on the original springs from the stock shocks, and once again with the lcg chassis I had to put the shocks quite upright to avoid any binding between the links. It now articulates really nicely and performs really well. Hope that helps bro! Anything else just let me know

@carsonbratanov1035

4 ай бұрын

@@rcfungames thanks for the help!!!!

Do u have a part number for that kit by chance

@rcfungames

11 ай бұрын

Yes bro no problem here is a link to the product, and below this link there is a discount link if you purchase it from Injora.com www.injora.com/products/injora-lcg-carbon-fiber-chassis-kit-frame-girder-for-1-18-trx4m And Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMTk4NDY0MzY3fQ%3D%3D

im having an issue with the chassis where the bronco body now does not clip in at the front , has anybody else had this and know a fix ?

@rcfungames

5 ай бұрын

A question the chassis you've got does it look like the one in the picture of this video? If yes it's the chassis for the defender, when I purchased this chassis they were both the same, but because of the issue with the Bronco not being able to clip in the front they changed the chassis and made it with a recession. Take your body off and look underneath the hood you'll see a black strip of plastic that goes from one side to the other of the inner fender, just cut this as close to the round piece with the screw as you can to allow space for the chassis That will sort your problem out. Hope that helps ✌️😉

Will the new shock positions add a little height? I was going to do aftermarket shock towers but for the price of this chassis it seems worth it to swap it out

@rcfungames

Жыл бұрын

Yes you definitely get a little bit more height out of it with this chassis but there's a few things I don't like about it. But in general I guess it's not that bad price for what you get. Thanks for watching and commenting bro 🤜💥🤛

@harleyguy932

Жыл бұрын

Do you think shock keys are a better investment, their about the same price 🤣

@rcfungames

Жыл бұрын

@@harleyguy932 personally that is what I wanted but there was nothing on the market at the time I purchased this chassis, I would give the shock towers a go and see how they work. And let me know what you think of them if you do give them a try 👍

Great video as always! Do you think it is worth the upgrade? I saw Injora says you will have to sand the rails and it is for the Defender technically. Did you have to sand anything? It is the one upgrade part I did not buy yet. Thanks!!!

@rcfungames

Жыл бұрын

Thank you so much I really appreciate the view and feedback👍👍👍 Yes it catches on the inner brace that goes on the inside of the body holding the mirrors and fenders, but as you can see I've been running it on mine and it's not had a problem it's a bit over tight fit and sometimes the body comes loose. Also if you do purchase it it is two-piece chassis and the screws and nuts holding it together like coming loose so make sure you do use loctite. In general I don't see the point of this upgrade, besides it giving more shock positions, that you cannot use as it catches inside on that brace. So in my opinion seriously I don't think it's worth the upgrade. It did help for travel on the suspension but then there are other parts out there we can do the same. I hope this helps you make your decision.🤜💥🤛

@spike--

Ай бұрын

​@@rcfungames I think this chassis is needed for the lay down servo axles.

@rcfungames

Ай бұрын

@@spike-- if you pay attention to when this video was launched, it was long before the lay down servo setup came out!! In my opinion there isn't enough space between the two front rails for a laydown Servo setup.

@spike--

Ай бұрын

@@rcfungames Ok a hole.

@spike--

Ай бұрын

@@rcfungames Maybe if you were paying attention. I never mentioned anything about a timeline. I was just saying. No need to be a D bag.

I have the land rover version an so far it’s pretty stock but I want to start adding mods…. I take it that this chassis helps keep weight low down and allows more suspension travel? Do you think it’s worth it?

@rcfungames

10 ай бұрын

Hi bro 👋 I also have the land Rover version and I've also fitted it with the LCG carbon chassis It definitely is an interesting upgrade, it allowed for better shock positioning, lower center of gravity, Also reducing the weight bringing the center of gravity lower. In my opinion it is worth it. Especially for the price.

@DJCJ999

10 ай бұрын

@@rcfungames what else do you recommend?… I see you can now buy metal axels and portal axels… although the portals look to widen the stance a lot! I would like to free up the drive train when at full steering lock… I think bearings sort that but it may take more parts..?

@rcfungames

10 ай бұрын

@@DJCJ999 look in my opinion definitely start with reduction gear set, bearing kit, and a set of brass rims and tires, then I would look for a servo, the portal axles I agree with you will take away the realistic look. I am running the aluminum axles from Injora and in my opinion it was an excellent upgrade as the quality is excellent and it took away any binding that happens on the axle as the original axle housings are extremely bendy (soft) After that it's up to you how you want the weight distributed throughout the vehicle. You always want more weight upfront then in the back. So then you can think of brass C hubs, knuckles, staring link ect... Hope that helps bro.

@anmic3590

25 күн бұрын

@@rcfungamesHi’ Thank you for the video. I’m new to this so it will help me a lot. I just got for me and my son the f150 ranger and the K10 Chevy. We already have upgraded the servo to the srt-dt06 as adviced by the rc shop. I was thinking about upgrading the front and rear axles with the ones from Injura. +4mm is ok? Or the diamond ones? And I saw that you need the injura chassis for these ones. Which chassis should I go for? And also the shocks and the rims/tires maybe to be upgraded. Can you also recommend one this as well? I would really appreciate it. Thank you!🙏

@rcfungames

25 күн бұрын

@@anmic3590 hi bro, that's awesome you guys are going to love these little trucks! The chassis I recommend is the universal chassis from Injora, as it is made to take the lay down Servo setup. When purchasing the axles you have got three choices on the extended axles, the normal black with upright servo setup, again the normal black axles but with the lay down server setup, and of course you've got the new diamond axles, and the new new portal axle Diamond axles. I haven't tried the last one yet so in my opinion I recommend the diamond axles. They are excellent and look amazing, now when it comes to rims and tires, especially on the High Trails, I recommend grabbing a set of brass rims, you can choose your favorite style, when it comes to tires, I really like the swamp stompers and the swamp crawl tires. When it comes to the shocks, I find that with the Bronco Defender and high trial F-150 Ford or Chevy, the 53 mm shocks work best. If you need any help putting these upgrades you can always check out my upgrade series on the k10 trx4m, and I will be starting an upgrade series on the Ford F-150 soon. It's actually taking this long for them to be available in Portugal. Here is a link to the K10 playlist kzread.info/head/PL8_i3m-2BtJRX8eiv6wKIfgmGBD84pRxo&si=bLZg6ogUUNxhiMSN

Is this worth it. Thinking about the lcg but idk

@rcfungames

6 ай бұрын

Personally I don't think it's worth it!! I rather keep this stock chassis. Fitting the carbon fiber LCG chassis causes you to have issues with the front and rear bumper and the body struggles to clip on and off!! It also limits you from putting on inner fenders and it makes it harder overall to work on your crawler! The positive sides are that you gain a little bit of articulation and a little bit of hill climb performance. Oh yeah and of course it makes it look fancy!! I hope with the pros and cons you can make your own choice. The cool thing is if you do use the LCD chassis you then have the original chassis to build something new from scratch.

@ll.7927

6 ай бұрын

@@rcfungameshonestly I installed it with the injora bumpers n I feel like my approach and climbing is way better.

@rcfungames

6 ай бұрын

@@ll.7927 I am sure they worked the Kinks out of it! Mine was the first chassis that came out, and the defender and Broncos chassis were exactly the same which afterwards changed. I really like what it did for the TRX4m high Trail!! Definitely some gains!

Where did you find that gas can?

@rcfungames

Жыл бұрын

At Injora.com

@Cbam871

Жыл бұрын

@@rcfungames thanks, I bought it also for my bronco build

What roof rack!

@rcfungames

Жыл бұрын

Hello!!! It's from Injora and it is for the Scx24 Jeep.

@1994RALLY

Жыл бұрын

@@rcfungames sweet!!

What are you tires please ? Sorry for my anglish 😂

@rcfungames

Жыл бұрын

No worries bro ☺️ the tyres or the 62mm pro soft tyres from Injora Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjpudWxsfQ%3D%3D

@tonymercha2032

Жыл бұрын

Thanks you 👌

Hi everyone, I have a question, please answer to me :) Why we need lcg chasis?

@rcfungames

9 ай бұрын

Hi dude, you don't need a lcg chassis!! But it is definitely an upgrade compared to the stock chassis. It gives more space for the servo, and overall has a lower center of gravity, and of course because it's carbon fiber the center of gravity gets even lower. Overall I think it is a pretty good upgrade to fit to the vehicle. I hope this helps you, anyting else feel free to ask ✌️😉