Here's a $5 off coupon for your first order at INJORA. To accept, use my referral link: i.refs.cc/4HXdTSJC?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMTk4NDY0MzY3fQ%3D%3D

These song choices are on point!

@rcfungames

3 ай бұрын

Thanks bro! I appreciate that very much man!! 🤜💥🤛

Love your logo sticker, sure would love to have one for my scale shop. Well catch you on the next one

@rcfungames

4 ай бұрын

I will soon be getting a new batch and when I do, I will let you know. Catch you on the next one bro!

nice chassis swap video, looks like it is performing very well Thumbs up 👍💯👍💯👍

@rcfungames

6 ай бұрын

Thank you bro I really appreciate it, definitely I am impressed with the overall performance gains from the chassis! ✌️😉🎄🎅⛄👊😁

Hello my Good Friend!!!! One more Super Cool Vídeo whit lots os nice Upgrades, Reviews and Tutorial!!!! Love the awesome test 💪🏻🐻‍❄️🐼🏆 Keep the Great Work 🌲❄️☃️🎅🎁

@rcfungames

6 ай бұрын

Hello and good morning Antonio Thank you very much I really appreciate you always showing your support! It's an awesome little pickup now it's time to add some accessories to it! You have an amazing day my friend 👊😁🎄🎅⛄

@pandacrawler6x6

6 ай бұрын

You are Welcome my Friend!!! Looking forward to watch that Awesome RC Truck full up-graded

Love the landscaping of your course, a little buildings and such super cool. I just went to your link for the chassis I’ve seen nothing but bad reviews I won’t be purchasing this chassis at least not now unless I hear they fix the problem. Again appreciate the video I’ll be watching for the next one until then peace and chicken grease 😁👋👋😎

@rcfungames

4 ай бұрын

Thank you so much Andre I have put a lot of effort into building this course but my health just doesn't allow me to do much nowadays. I'm still trying to complete it and there are so many things I want to build in there. Let's see how this year goes! Thank you so much for all the support. No I also wouldn't purchase this chassis again! Go for the new Universal lcg chassis! It's a really nice fit and it goes on all the platforms so you could always change the body if you wanted to just by taking away two of the little tabs. I think it's the best lcg chassis they've come out with. So just look for the universal lcg chassis on Injora site.

@andrewrichey7374

4 ай бұрын

@@rcfungames just Half to take your time, And don’t overwork yourself. Hope your health gets better.

I’ve got the black one on the way, I am stoked the detail really looks awesome.

@rcfungames

4 ай бұрын

You're going to love it bro it's such an awesome looking truck. I still want to fit some inner fenders to mine to make it look a little bit more realistic when filming it. And congratulations on your purchase Andre.

@andrewrichey7374

4 ай бұрын

@@rcfungames Yes I am with you on the inner fender wells. I love my scale rigs

I didn't have any issues at all with my chassis. Only the clearance issue with the double sided tape that you just showed me how to solve

@rcfungames

6 ай бұрын

I'm glad to hear this it seems like it was only very few that came with this issue out of the whole batch! I immediately thought if I used the double-sided tape I was going to have issues with the wire is clearing the bed! Buy screwing down the ECM it allows just enough space to fit the body without any issues. Thank you very much for watching and leaving feedback on this product 🤜🤛

Mine comes in a few days (hopefully), glad i caught this video.

@rcfungames

6 ай бұрын

That's awesome, you will not be disappointed. Even if you have a problem just use two spaces and you should be able to run the tray that comes even if you have this issue. The only reason the tray was falling out was the poles were really that short that by putting the mount in it made the Gap at the bottom too big. I have checked with Injora and they have double checked but all the rest seem to be perfect. So you should be lucky 😉 Happy holidays to you and yours. And thank you for watching and commenting. 🤜💥🤛

@christophergreen2328

6 ай бұрын

I just got mine in today, and it has the spacers included. So I assume it has a wider esc mount!

@rcfungames

6 ай бұрын

@@christophergreen2328 if you talking about the little brass spaces those are for your shocks! The brass polls provided should be the right length.

@christophergreen2328

6 ай бұрын

Got it together and only issue I ran into was with the esc tray wouldn't fit into the slots in the rail, a quick file with my Leatherman tool fixed and slight tapping In with a brass hammer (the handle of my pocket knife) it slide right in. Thanks for the awesome video. Another thing is the ads for the frames states the kits come with instructions, which it doesn't.

@rcfungames

6 ай бұрын

@@christophergreen2328 nice job bro! One thing about this hobby is you've always got to be ready to do a bit of mods yourself to get things to fit! I'm glad it went really well and I hope you have some awesome crawling adventures. And thank you very much for the awesome comment and support! Wishing you and yours a merry Christmas 🎅🎁🎄⛄

Hello, Very nice Video, I really liked it.! 👍 Nice greetings from Germany!🖖🍀 🎅🤶🎄

@rcfungames

6 ай бұрын

Hi Seven Thank you my friend I really appreciate it 👍 Greetings from Portugal and wishing you a merry Christmas! ⛄🎅🎄🖖😉

@SevenWelt

6 ай бұрын

@@rcfungames 😃

I would love to get this chassis four my TRX4M but not with that issue of being too narrow. Sure appreciate you sharing the video. Looks awesome out there on the course

@rcfungames

4 ай бұрын

I would rather go for the new Universal lcg chassis they have come out with, it is perfect. And you can adapt it to any of the platforms High Trail or the normal Defender/ Bronco. Once again finds her thank you very much for watching and taking the time to leave me a comment. 🤜🤛

@andrewrichey7374

4 ай бұрын

@@rcfungames you’re welcome this hobby is my passion I’d love it. Have you heard of Jaysen RC check him out some time does live streams Friday and Saturday 10:00 PM here in Michigan. It would be cool to see you there sometime. Great RC community.

Have the same problems and thought about the same solution. You could mill the transcase a bit down to fit in the narrow space.

@rcfungames

6 ай бұрын

Looks like a few people have had this problem, I sent the measurements to Jeff at Injora and he has come back saying that they were too narrow!! But it looks like it was only a few out of the whole batch! I personally don't recommend shaving down the transmission mount, as then the whole geometry changes! Just use a couple of spices it's much easier. I'm sure if you contact Jeff at Injora and tell him you had this problem, they will ship out the correct length brass poles. I really appreciate you watching and commenting 🤜🤛

Good video! I just got a set of Injora 1" wheels also, I put some 24x62x20.5 BRKRC swampers. I used the foams from the stock tires, VERY IMPRESSED. Nice coarse you have as well!! The coarse I have put together looks like a DISASTER site compared to yours!!!!

@rcfungames

3 ай бұрын

Sounds like you've got an awesome setup! I really like the Injora rims, and so far I'm really impressed with the tires too! I am going to try the new silicone inserts let's see how those behave! I really appreciate it bro! I still want to do so much more on the course!! Thank you so much for watching and leaving me a comment bro 🤜💥🤛

Nice work mate. Is the creek seasonal. Works really well there as functional drain.

@rcfungames

2 ай бұрын

Thank you buddy 🤜💥🤛

Got this chassis on mine, so far so good. My only gripe, is the bed of the body compresses hard on the connections on the ESC...🤦🏼‍♂️ On the more positive side, I gotta fix my 59mm shocks & get some oil in those puppies, my rig wants to do funny things when it turns...🤦🏼‍♂️ Will get it done. Lol 🤞🏻🙏🏻

@rcfungames

6 ай бұрын

Luckily it looks like it was only a very small percentage that have this issue, so far only five people have had this problem with the chassis. Yeah I could see there was going to be issues with clearing the bed of the truck with the wires that's why I didn't use the double-sided tape and bolted the ECM down to the tray, that allowed for just enough clearance to fit the body without any issues. Hell yeah bro get those puppies fitted because you're going to notice a massive improvement! I don't recommend any less than 50WT oil for the 59 mm shocks. I always appreciate you watching and leaving a comment, thank you 👊😉🎄🎅⛄✌️😊

@RCCrawlerz209

6 ай бұрын

@rcfungames yeah no problem man. 🤙🏼

@RCCrawlerz209

6 ай бұрын

@@rcfungames Also, I found that Injora has a universal chassis that works with the lay down servo mount for the trx4m, especially for the k10. Gonna look at that?

@rcfungames

6 ай бұрын

@@RCCrawlerz209 I've already got the new chassis on the way and the new body that just came out!! I was waiting for their diamond axles to be available for this build but I think I'm just going to go for the 4 mm extended axles with the lay down servo mount, to try it out with that chassis. 😉 But it's probably going to be a while before anything arrives because of Christmas and New year!

@RCCrawlerz209

6 ай бұрын

@@rcfungames Can understand that. Lol

I think this will be one of my first upgrades I'm going to get out of the way.

@rcfungames

4 ай бұрын

It's a great place to start, it definitely gives you better climbing capabilities also provides better articulation.

The chassis isn’t made for factory skids. There’s a difference between flat rails and stock c channels.

@rcfungames

3 ай бұрын

There is definitely a difference between the c channel chassis and the carbon fiber chassis rails! But so far I have been able to fit everything that is supposed to fit the original C chassis rails I will do a video soon fitting sliders to the K10 Really appreciate you watching man and taking the time to leave a comment. Thank you 👊😉

What are the best upgrades/recomended for crawling on the trx4m Chevy k10 the red truck you have?

@rcfungames

4 ай бұрын

1 I recommend the complete transmission from Injora with their 48T motor with the reduction gears. 2 I would then definitely recommend a servo! 7kg or 11kg from Injora. 3 Then I would definitely recommend to save a lot of money a set of extended axles with the stand-up Servo setup! 4 These are two upgrades but you might as well do them both at the same time, hi Clarence links and upgraded driveshafts. 5 And you might as well finish it all off with a set of brass rims and no bigger then 64mm tires That's my five recommended upgrades, and doesn't really leave a lot besides shocks chassis and electronics left to upgrade. In this manner you will end up saving a lot of money on your build in the long run. Hope that helps man, thanks for watching and commenting

No problem with mine but I didn't tighten everything down all the way until my other stuff was fitted ...

@rcfungames

5 ай бұрын

After taking measurements and speaking to Injora the brass poles separating the chassis where exactly 2 mm too short for some reason!

Seems to me LCG rails are kinda counter productive considering it’s a High Trail that’s the problem I have with my Defender M I was disappointed after a bunch of upgrades but then I just realized it’s never going to be a LCG rig I bought it because I liked they way it looks now I have fun with it because my expectations are lower now. You can’t make something out of something that was never meant to be.

@rcfungames

5 ай бұрын

I don't understand your comment the lcg chassis improved the performance on my high Trail hugely!! It reduced its ride height and gave me much better articulation at the same time keeping the center of gravity lower. All in all it is my best performing rig . And I would recommend this upgrade to anybody that's looking for a bit of extra performance. I do appreciate you watching and taking the time to leave a comment. Thank you 🤜🤛

Did you have any issues with the connectors and the bed height? When I put mine together the ecm sat too high and would hit the bed

@rcfungames

2 ай бұрын

No I didn't have any issues because I screwed my ECM down to the tray I made! Which allowed for just enough clearance for it not to push on the tab! But it is extremely close and the wires are bent over! So I removed the three cables from the tab, and cut away about 3 mm of the plastic which allowed for it to fit much better. Hope that helps bro hope that helps bro ✌️😉

i mostly want to do this to lower the ride height

@rcfungames

5 ай бұрын

A definitely provides a little bit of a lower ride and it definitely allows a better articulation! Check out their new Universal lcg carbon fiber, it is adaptable to all the trx4m platforms. And the way it is set up I prefer it to the conventional lcg chassis. I also have no problems with the assembly and it allows for the lay down server setup which you never know if you want to do in the future as it provides better steering angles and articulation. I hope that gives you something to think ✌️😉

Anyone had experience with the injora diamond portal axles for this ?

@rcfungames

Ай бұрын

These chassis are designed to taper on the front end, meaning it gets narrower. So if you want to run the portal axles with the light on servo, all you need to do is just make it a bit wider, use a spacer on the front brass pole separating the two chassis rails. That shoot alone for enough space to run to lay down servo setup.

I had no issues with mine. I ordered mine the day they came out. Wonder if there was just a bad batch.

@rcfungames

6 ай бұрын

Thank you for the feedback, and yes it looks like it was only a few out of the whole batch that have this issue! Somehow the brass poles are about 1 1/2 mm short compared to what they supposed to be!! In my opinion it's not a big problem and Jeff was very helpful, like always! Thank you so much for watching bro 👊😉

Great video awsome truck will that battery tray work in the tarantula

@rcfungames

6 ай бұрын

I believe it will! but let me contact Jeff just to confirm and I will let you know. And thank you very much for watching and leaving a comment 👊😉🎄🎅⛄

where did you get the spacers for the brass poles

@rcfungames

2 ай бұрын

You get them on the Injora site, if you look through the parts listed for the Traxxas TRX4m you will find them. If you can't find them let me know I'll share a link! ✌️😉

Can you spin the servo 180 degrees ?

@rcfungames

Ай бұрын

There is absolutely no reason why you can't! It's much better than trying to change it through the original electronics.

Anything to help with the binding when turning?

@rcfungames

6 ай бұрын

If you're having binding when turning set the endpoints of your Servo to the point where it's not binding. Another question do you already have bearings? And are you still running the original axles? If you still got bushings and you run it once or twice it will start binding when you turn! If you're running the original axles you will have a very similar problem as the geometry designed by the factory is not great.

@FishHardGetLucky

6 ай бұрын

@@rcfungames I installed a bearing kit. What axels do you recommend? How do you set end points with that esc/receiver combo?

What did you use for a spacer? Where can I get some?

@rcfungames

4 ай бұрын

I got the spaces from the Injora site, www.injora.com/products/injora-80pcs-m2-5-flat-stainless-steel-washers-spacers-for-mini-rc-crawler-mods-4m-49

@rider3859

4 ай бұрын

@@rcfungames Cool thanks 👍

How long does it take to receive Injora stuff?? It’s been like two weeks since I ordered my parts. 😅

@rcfungames

6 ай бұрын

Normally it does take around 9 to 14 days, but due to all the orders would have been done for Christmas everything is running late!! And I would say it's the delivery services that are struggling to deliver! I have the same issue I waited 3 weeks for my parts because of the Christmas rush!! I hope they get to you just before Christmas 😁 Thanks for watching and commenting. 🎄🎅⛄

@alejandrovargas5123

6 ай бұрын

Just got my parts today i practically ordered all the same parts you have on this red one lol 😅. I have the black truck tho. Thank you for your videos👍🏼👍🏼

@alejandrovargas5123

6 ай бұрын

I’ll let you know how it goes with my frame.

@alejandrovargas5123

6 ай бұрын

Where can I get the spacers ? I have the same issue 😵‍💫

@rcfungames

6 ай бұрын

@@alejandrovargas5123 dude that is bad luck! Here is a link to the spacer set from Injora! www.injora.com/products/injora-80pcs-m2-5-flat-stainless-steel-washers-spacers-for-mini-rc-crawler-mods-4m-49

What a disappointment. And they didn't even work with you 😮. But proceeded you did ❤

@rcfungames

6 ай бұрын

Don't worry! Jeff has been in touch and we have worked out it must just have been bad luck! I sure the rest will be perfect! I am still extremely happy with the performance gains I got from the chassis! And I still recommended it.

@thomasblair7996

6 ай бұрын

Thanks for the heads-up fixing to make my purchase, will be on the lookout for the problem, have a good day!!!

What a disappointment! I love Injora but the quality control of the LCG is horrible! Was others on the TRX4M FB group having the same issues?

@rcfungames

6 ай бұрын

It is a little bit disappointing but after speaking to Jeff at Injora we have come to the conclusion that it was only a handful that had this issue out of the whole batch!! And it is very strange, they have checked all the chassis they've got in and they've all got the right size. So far I only know of five people that have had this!! What I like is if you do have any problems, Injora is always super helpful! Don't let this put you off because even with this issue it was an easy fix and the performance gains were huge!! In overall I am really impressed with the chassis. Like always bro thank you so much for watching and commenting. Happy holidays ⛄🎅🎄

@SinisterDeeds214

6 ай бұрын

@rcfungames I'm glad Jeff and you solved it! you should have added that disclaimer at the end of the video, bro. A lot of people are going to think the same thing I did.

@rcfungames

6 ай бұрын

@@SinisterDeeds214 I am sorry I did put it in the description of the video that that this was just a minor hiccup I wanted to but, as I didn't get a reply because injora is so busy and I needed to get the video done I did mention that only a few people have had this issue and it's probably just bad luck.

@SinisterDeeds214

6 ай бұрын

@rcfungames yea I feel that. I'm just glad Injora made it right. I don't usually read the description unless there's info or links I want lol.

That doesn’t seem like them just saying basically deal with it they should’ve offered assistance now to get it to work minimum dad on them if that’s the way it happened.

@rcfungames

5 ай бұрын

They were perfectly helpful but there was no reason for them to send me out anything as I had already sorted out the problem. We discussed the measurements and the poles separating the two chassis rails were too short. Like this at least nobody else will have this problem because they have double checked all their stock.