Super excited about the update in older injector technology. A clean starting and clean running 12 valve sounds great. Guess I'm gonna have to pull the trigger now.

Happy Thanksgiving DDP Team. Lenny had some jerky hung up in the ol windpipe. You guys are top of the line. Keep up the great R&D and keeping these old trucks on the road performing like the new trucks.

@DynomiteDieselTV

Жыл бұрын

We're not stopping, and stepping back into the 12 Valve P-Pump applications next!

Can’t wait to see that late 5.9 your talking about. I’m looking for that type of setup, clean quiet 600+. 12v injectors; Maybe compare your new ones to factory marine and your old extrude, would be nice to see on bench and dyno.

@DynomiteDieselTV

Жыл бұрын

We sell injector sets daily that will support your goals of a clean and quiet 600+ HP setup. If you're interested, fill out the Custom Injector Form on our website, and we can make a recommendation for you.

Great video. The pilot technology you discussed is very interesting

Great job Lenny and entire Dynomite Team !!!!

always like learning about the tech behind the stuff!

@DynomiteDieselTV

Жыл бұрын

Glad to hear it!

Golden info ... Good to understand the newer advancements. 👏 Worth the investment!

Great job Lenny

this was a very informative video. not that i understood all, but keep posting stuff like this ! def. ear & eye worthy! thank you! fyi... your not old. !! you are Wise! thanks!

@DynomiteDieselTV

Жыл бұрын

Happy to hear that!

As always, super informative and very interesting!!!

@DynomiteDieselTV

Жыл бұрын

Glad you enjoyed it

Commenting for support

@DynomiteDieselTV

Жыл бұрын

Every little bit helps, Thanks!

Awsome information thanks for sharing.

@DynomiteDieselTV

Жыл бұрын

Thanks for watching!

I'd love to see what y'all could do with a set of 2.8l Duramax injectors. Keep the videos coming. I'll watch a 30+ minute knowledge bomb video!

@horsewhispererr

Жыл бұрын

I was just about to say the same thing. I have a 2.8 that I would like to put ddp injectors in.

wow the wealth of knowledge lenny has, still advancing technology on 20 plus year old trucks, i love it and good job. DDP has to be the only company doing stuff like this aftermarket wise for injectors, i mean why would anyone buy anything else but ddp. Question, the new power driven diesel 12v power jet injectors as they call it, as i understand there manufactured by ddp, do those have that pilot technology in those? and what spray angle are those at? how many holes? what size holes?

@DynomiteDieselTV

Жыл бұрын

That's a question for Power Driven Diesel, not us unfortunately.

Have you tried making the pilot hole setup using a dual rate spring on the pintle so the pilots would fire until the flow went up enough to start activating the big holes?

@DynomiteDieselTV

Жыл бұрын

The amount of pintle lift is already a really small number. Adding a dual rate spring would only operate based on the lesser of spring rates, so I'm not sure that your idea will work.

So with all this experience, where is the book that dials the costumer in for best results? Rating hp, fuel mileage, and torque rpm range? Don’t skimp on anything; turbo, manifold, injectors, pumps ( lift and pressure), exhaust system. Of course you will need to include different vehicles and engines. But if you had a catalog we could point at and say this is my goal for now! And Dynamite Diesel is my go to.

@DynomiteDieselTV

Жыл бұрын

There is no book, or simple answer, when it comes to the "perfect" setup. "Perfect" is extremely subjective, and changes depending upon what someone's end goal is, paired with their driving style. Let's not forget the fact that every one of these trucks/engines are different. Just because you install the same parts, in the same engine, doesn't mean that they will respond the same. This is why we have forms on our website, that we ask customers to fill out, to provide us with as much information as possible about each customers build, so we can make the best possible recommendation on injectors.

Hi Lenny I like how you mix dance art with your tutorials. At 10:08 and at 10:35 you were doing The Village People YMCA dance. You are good at injectors but you should hone you dancing skills a bit more. I am in the process of swapping in some of your injectors into my 06 Ram truck. I can't wait for the day I can turn the key to see and feel the difference. BTW should I have my injector lines professionally cleaned? Or is brake clean and air pressure ok?

@DynomiteDieselTV

Жыл бұрын

We'll suggest that he takes some dance classes! Ultrasonic cleaning the fuel lines would be your best bet, and it's a service that we offer. If you're interested give us a call!

I am with "thekid760" I would love to see those videos, some data, dyno run sheets etc. anything!! on the 6 to 700hp 2006 5.9 injectors, especially with a cat still installed. I run Calibrated's tunes and they are the best of the four tuners I have tried and now that they are familiar with DDP injectors I am one step closer to making a purchase. Lenny has talked about their six hole injectors for the 2006 and 2007 5.9s in several videos (I own a 2006) and how they run very clean, quiets down the pinging and rattling and have great tip-in/throttle response, smoke and EGT control with plenty of power but,, all I have to go on are the three or four talking videos. Great info. love the pilot hole idea. I hope to see these show up on their web page with some supporting data soon.

I’m old and new with injectors with a 1991 Cummins 6BT with factory Holset and aftercooler Not looking for horsepower increase just better than factory and perhaps properly injectors would be the key to a sweet spot. Not interested in more horsepower because of the Allison AT545 can’t take it. Can you build better than original injectors for me ?. It’s a flat nose bus by the way.

So large nozzle injectors will flow just as little as stocks because of inmproper pressure balance between control area and needle area. Translation: large nozzles are lazy and extend duration time and injector duration with the same energize time. The goal is to mimic stock injector timing with larger higher flowing nozzles. Question- how much bigger of a nozzle before body modification is needed? In other words, accepted timing goes out of spec at what percentage of the nozzle being enlarged. I want to do 60% nozzle swaps. Thank you.

What could be done for a 12V p-pump if maximum mpg is my goal? Have you worked on this and have any mpg numbers?

Are these modified injectors more accurate than factory bosch and continental?

Is the pilot hole stuff applicable to like a 7.3 Powerstroke?

@DynomiteDieselTV

Жыл бұрын

We've tried it. It's still something that we're working on perfecting!

@lennyreed9852

Жыл бұрын

Yes sir. Been in use for the 7.3 about 2 years now. 👍🏽

If spray angle compatibility is so critical then why don't they mark the bowl angle on the piston id label on the box I called tech support at Mahle to confirm what Ken ordered me was 1st gen Cummins spec. Or if you were getting ready to ship me a set of correct angle sticks. I had to explain that Bowl and spray angle matching is a critical aspect for diesel. Definitely a man that worked the gas side of the house Never got him convinced I wasn't blowing smoke up his ass. So have no bowl angle, just a hope and prayer that it's right. And then I don't squeeze the head off of piston from hoseing the piston in my fresh motor.

@wadetate6459

Жыл бұрын

Seems like 90% of the aftermarket stuff is 155 degree marine or non inter-cooled to me. An easy way to tell is how many rings the piston has. The marine pistons have an extra ring. You could probably break out the calipers and call some 12v specialists and get sorted out.

@daviddroescher

Жыл бұрын

@Wade Tate so you are suggesting I need new injectors? 1st gen Cummins injectors are 145° If i have proper 145° pistons the problem is 155° will melt a145° piston from spraying out of the bowl.

@wadetate6459

Жыл бұрын

I’m not claiming to be an expert. Call someone who is. I have no idea what pistons you have. Non-intercooled first gens were 155*. Marine are 155*. Intercooled first gen+ p-pump were 145*. There are significant visual differences between pistons.

@daviddroescher

Жыл бұрын

@Wade Tate as I said I called the engineering department at Mahle to get the answer the man could not say from part #'s if the parts in my motor were 145°or 155° only that it was +0.020". And yes IC 1stgen so I've got the 145 injectors ( factory original w/.5M mi repoped to 253bar 25k mi ago) A 155°piston will work in a non-catastrophic manner, but will not work RIGHT. It'll have idle haze ( check symptom present only after the rebuild), get poor mileage ( check lost 3mpg) , low boost/ high egt from the improper burn( check lost 5psi and gained ~150egt). All reasons I called the maker of my piston in the first place.

Superb❤️!! You are late to the party = 'Promosm'!