That makes sense. Thanks! I will try again!

Cute! I can think of a million uses for this. Thanks for sharing.

Thanks Lisa! This was perfect timing for me!

great explanation lisa

Excellent, you are so very good at this, I am learning so much....Thank you

Thank you! Very helpful!

Thank you Lisa. I am going to make a sweatshirt.

excellent content

I just have to bite the bullet and get Enthusiast and SA1. Been sitting on the fence long enough.

@traceyjones6220

3 ай бұрын

You can do this on the Babylock Solaris without enthusiast

Great video, Lisa. However, I was a little confused when you opened the Inflate diaglog box. you said it was a function of Embrilliance Enthusiast. Mine is only the Knockdown diaglog box and only allows me to go up to 2.0mm. It that a function of Stitch Artist 3 instead of Enthusiast?

@Embrilliance

6 ай бұрын

No the process was done in Enthusiast Http://embrilliance.com/contact-us-2

@Spring_Flowerrrrs

6 ай бұрын

Right. She mentioned this could be done in Level 1 but the feature is in a totally separate suite- Enthusiast. So aggy

@Embrilliance

6 ай бұрын

@@Spring_Flowerrrrs draw with points to create the same shape in level 1

Love it, thank you. You mentioned using scan n cut…. How did you do that?

@Embrilliance

5 ай бұрын

Check out video #6 on our quick tip playlist.

@user-bx3gy5gk1o

5 ай бұрын

Thank you!

Hello @Lisa Shaw I have a few BX fonts I bought that I would like to change the location of the jump stich from letter to letter. Can I do that in any of the Embrilliance software?

@Embrilliance

7 ай бұрын

Stitch based BX fonts are basically designs mapped to the keyboard. So there is no automatic way to reconnect the stitches. You could possibly use the stitch editing function of Enthusiast to add individual stitches to travel from the end of one letter to the start of the next. See our stitch editing videos on our Enthusiast playlist

I have an 8x8 hoop as my largest regular hoop, but also have a 8x14 flip, or repositional hoop...will this design, "DogMom" with the inflated raw applique work with my flip hoop?

@Embrilliance

8 ай бұрын

There is a video on creating the split hoop template on the Enthusiast playlist. Think about splitting a single large applique…not an easy clear cut project.

New to all of this are all of these fonts available with stitchartist 1?

@Embrilliance

8 ай бұрын

StitchArtist comes with Block font. The font used in this project is linked in the description There is a great overview video as well as beginner info on this page. www.Embrilliance.com/start

Si do that functions work on stitch Artist 3?? Because mine doesn’t have inflate, I’m still learning 🙄

@Embrilliance

6 ай бұрын

Sounds like you should reach out to support to find out what you have and make sure all is working as it should. StitchArtist L3 is not shown in this video so KZread is not the best place to get the answers you need. Http://embrilliance.com/contact-us-2

Do you need both software modules to make this effect?

@Embrilliance

20 күн бұрын

This video shows a technique using the Knockdown shape of Enthusiast and using StitchArtist to assign new stitch properties. Alternately you could create the shape using draw with points of StitchArtist. StitchArtist is required, Enthusiast provides a shortcut.

Is there a way to add automatic stop after applique placement in the software? not color change but full stop so when I go to machine the hand showing that machine will stop is there. I have Baby lock valiant.

@Embrilliance

7 ай бұрын

Use the brother thread palette and the applique colors for each appropriate step.

Hello, I need help finding the knockdown stitches because they are not where you have them in the video. appreciate your help. Thank you

@Embrilliance

5 ай бұрын

Be sure that you have your Enthusiast number added. Please contact support if you need assistance. Http://embrilliance.com/contact-us-2

I have 2 questions. Can I use a satin stitch for my finished stitch? Second when I lasso all the nodes and rt click it doesn't give me the curve mode. Gives me paste and a few other things. Thanks

@Embrilliance

3 ай бұрын

Yes on satin. Best way to get support is on the website. Http://embrilliance.com/contact-us-2

@kimredding30

3 ай бұрын

Thank you

Lisa...How would I do a two line inflated applique?...so it will capture both lines in one ...if that makes sense.....I typed in the two lines but when it did the knockdown....it separated them....help!

@Embrilliance

Ай бұрын

Your design elements need to be closer together. Be sure to watch the various Knockdown videos on the Enthusiast playlist.

So to do this DogMom you have to have Stitch Artist 1, Enthusiast & Essentials?

@Embrilliance

7 ай бұрын

To create following the steps in this video, yes. You can draw with points to create your bubble if you just have StitchArtist.

The short cut you describe in selecting all the nodes and right clicking to Mae them curve nodes doesn't work. Is there another button you need to press to do this. You discuss this at 10:23 of the video. When I right click I got a copy button. Did you skip a step?

@Embrilliance

4 ай бұрын

Need to select nodes then right click on a node. If you get a different menu you aren’t on a node.

@BoricuaSewingCrafts

4 ай бұрын

I GOT IT I GOT IT!!!!! Thank you soooooo much!!!!!

Would an appliqué font work for dog mom instead of a fill font? If so are there extra steps?

@Embrilliance

5 ай бұрын

Would work the same! Even works for a design not lettering!

@cynthiasmith6527

5 ай бұрын

Would there not be added steps?

@Embrilliance

5 ай бұрын

@@cynthiasmith6527 why would it have extra steps? You should give it a try!

What level of stitch artist is needed to accomplish this technique? Can it be done with level 1?

@Embrilliance

6 ай бұрын

Yes you can do this in level 1. Be sure to watch the video a couple times to become familiar with how easy the process is!

@brendafogerty1685

6 ай бұрын

@@Embrilliance ok. Ty. I need to verify that I have enthusiast and not just essentials.

I am struggling with this program. I cannot get my fonts to load in Embrillance.

@Embrilliance

7 ай бұрын

Tech support is available on the Embrilliance website. Http://embrilliance.com/contact-us-2 They answer every question and you can even log in to see the conversation from any device.

Is it possible to add a satin stitch on the outer edge?

@Embrilliance

5 ай бұрын

You can choose any stitch type you want. Have fun!

@sarahelffers9466

4 ай бұрын

Which one would result in satin stitch: single, double, bean, chain, backstitch, stem, sashiko?@@Embrilliance

@Embrilliance

4 ай бұрын

@@sarahelffers9466 satin border

@Embrilliance

4 ай бұрын

@@sarahelffers9466 be sure to read the pdf manual on StitchArtist to become familiar with the stitch types available to you. There are control videos for each stitch type on our StitchArtist playlist!

Great video, however I wish it wasn't so blurry :(

@Embrilliance

2 ай бұрын

Check your resolution on KZread. Should be at the bottom of the video