Absolutely great video boys, lance you did a fantastic job explaining everything!

@Talariaboys

Жыл бұрын

I really appreciate that! Thanks for watching!

great video! loved all the info! You guys are like the only ones with a video about this!

@Talariaboys

Жыл бұрын

Glad it was helpful!

Thanks for a very helpful overview of the different options available.

this is exactly what i needed right now! upgrading my talaria xxx brakes today, wish me luck!

@Talariaboys

Жыл бұрын

Nice! hope it turns out well!

@kmanboards

Жыл бұрын

About to do the same thing to my xxx. Which upgrades are you going with? I think my brakes were rubbing a lot and I've worn them down quite a bit.

Just the info I was looking for! Thanks guys!! 👍

Just ordered the xxx super excitedddd omg

@shaveddave

Жыл бұрын

From where

@codyklaas3729

Жыл бұрын

​@@shaveddaveluna cycle.

Great review of the different options and brakes for a future video. I’d love to see you cover suspension set ups for a stock talaria sting MX four.

@Talariaboys

Жыл бұрын

Yes hopefully we can go in more depth soon, We will be going to visit EXT and will be making a suspension video with them.

Super informative, thanks :)

@Talariaboys

Жыл бұрын

Glad it was helpful!

Gritshift has a big break kit with a 260mm rotor and an adapter to use Brembo P2 or P4 calipers. The same used on Ducati motorcycles.

I'm really liking this bike. Xxx

Great info here. I don't want to upgrade anything on my sting r but im burning the rear brake after 3 days from all the trail braking technique I do. One side my rear pad is thin the other side is thicker.

Graphics look mint

@Talariaboys

Жыл бұрын

Ya boy! They are always turning heads

Any recommendations on security. Locking up with chain or u lock to prevent theft? Thank you

Just the video I was hoping for, going to throw away my stock R pads as they're pretty awful.

Ktm 85 fork brakes are top tier when people do those forks. Idc about the extra weight. Im interested to see you do a video on moto brakes. What conversions are out.

very helpful video keep up the well job. im going all in on the entire brake system with my sting. would i need anything to make the change like an adapter spacer kit? or will i be ok with all the 5 parts listed in the link for the brake kit?

@Talariaboys

Жыл бұрын

Nice! Order up the TRP's and then the rotors and then youll just need the rear brake adapter from rippin moto and which ever front fork you have youll need a rotor adapter to match for the new 250mm rotors.

Been watching yalls videos and I just ordered a XXX. I'm psyched!

@brianskies

Жыл бұрын

nice where did your order it from?

@jordanweltha7196

Жыл бұрын

Luna?

@brianskies

Жыл бұрын

Yea I keep seeing people buying them but the website still says out of stock and I put my email for the restocking alert. Are they going in order? Lol

@Talariaboys

Жыл бұрын

They will be instock soon with lots of inventory, Just a little longer and theyll be ready!

@brianskies

Жыл бұрын

@@Talariaboys Same price hopefully?! lol

If you are upgrading to the Rippin Moto 250 set, do you still recommend going with the TRP caliper set, or is the talaria set fine on a mx4?

Great vids guys! Question, is the tire you put on the front of your Sting R's a Kendal K785 Millville II tire front -70/100-19 and if so what do you put on rear if you ride strictly dirt (same tire?) Thanks in advance, keep up the good work!

@Talariaboys

Жыл бұрын

Yes that’s correct. And yes we recommend the same tire on the back. That’s what Reed and alex are running.

You guys interested in larger front forks? Maybe a seat riser? If it goes 72v I wanna get one and make it bigger and put some plastic fairings on would look like a nice enduro 💪🏽

Have you guys tried the Hope Teck 4 E4 and V4 brakes? they can support a 3.2mm rotor and have a slotted dual front rotor that fits as well. They also use dot 5.1 fluid not mineral oil like most mountain bike brakes. Love your videos keep them coming boys!

@Talariaboys

8 ай бұрын

That’s the one brake set we haven’t tried, maybe someday but so far we are very happy with the TRPs and larger rotors!

@Talaria567

5 ай бұрын

This is what I want to see. If we can get 3mm rotors with high end dual piston calipers we will have nearly motorcycle level brakes without the weight

@Alex-oy6wb

2 ай бұрын

@@Talariaboyshave you tried the hope brakes yet?

Got my sting r ordered😊

I've owned my Talaria MX4 for a little over a month and I'm fine with my stock brakes. However, I think I'll take Lance at his word and buy upgraded brake shoes when my old ones wear thin. It seems to me my 220 mm rotors are big enough for good stopping power.

@FumblsTheSniper

Жыл бұрын

Yeah I’d upgrade after the first change. That way you know they work and haven’t been beaten up in case something happens to the new ones you aren’t waiting weeks to ride.

@Talariaboys

Жыл бұрын

Good plan my friend!

Do braided cables make a difference? I was told it helps dissipate brake line boil? I am experiencing extreme brake fade on the descent. Sometimes resulting in total loss of brake lever travel. It is a String R with 500 miles. Any thoughts? Thanks for your great video on brakes. Lots of work to put this content out.

@Talariaboys

8 ай бұрын

Braided theoretically is better but getting some high end brakes makes a massive difference and our trps are not braked and I don't feel like I need any better brakes.

Hi, I'm a big fan of your channel, and I'm thinking of getting an mx3 soon. What upgrades do I need to do to be able to customize my throttle settings so that I can control my torque output?

@Talariaboys

Жыл бұрын

The KO nano would be a good option and it’s the cheapest one too!

@mltprngkim391

Жыл бұрын

@@Talariaboys welp $750 down the drain! thanks a lot 🙏

I need a new rear brake on my talaria xxx. I’m not sure how to know what hydraulic disk brakes fit my bike so what are some brakes that will fit and aren’t more than like 150 for just one brake? Thanks

@Talariaboys

6 ай бұрын

You could order a replacement brake from Luna Cycle for around that price, otherwise a true upgraded brake will be more like $200-250

I love your Sharon x and I don’t know why wow you explain everything on brakes the hundreds of thousands riding you do straight up a mountain and down the other other side you need brakes

@Talariaboys

6 ай бұрын

This isn’t making much sense? Can you explain your question again?

Can you do a install tutorial on the 250 rippin moto rotors when u get yours please!!

@Talariaboys

Жыл бұрын

Will do!

How did you fit front 250s on talaria ? I have trps and cannot fit the caliper on it even with the attachment that comes for talaria, the back 250 fit fine. The front doesn’t fit

@Talariaboys

6 ай бұрын

Sorry for the delay in responding but I know they do fit you just probably need a different front adapter.

I wanted to upgrade to the shimano saints with the xtr ice-tech rotors, but they only come in 203mm. I don't mind going from 220mm to 203mm, but I'm worried the rear rotor on the mx4 will rub since the stock is 2.2mm thick. Is there a way to upgrade/replace the rear rotor on the MX4? Luna cycle told me you cannot replace the rear rotor. This is the only thing holding me back or I'd get an entire brake set and both new rotors. Now since the stock rotor is 2.2mm, the only option would be the TRPs since they are made for 2.3mm rotors. Everything else would rub, like you mentioned its almost impossible to keep from rubbing. What rear rotor do you have currently on your MX4? or what do you plan on upgrading to? Any links? :) You mentioned TRP makes 220mm rotors as well? All I can find is 203mm

@brianskies

Жыл бұрын

I see the link now to rippin Moto 👍

Any seat upgrade for the XXX? Also what headlights do u have on yours?

@Talariaboys

Жыл бұрын

No seat upgrades yet, We wired up some amazon light pods that we had laying around from our side by side. They are working pretty well but are not plug and play by any means.

How long has your pads lasted? So far I have 500 miles on my xXx and they squeak so much. Even after bedding them and re aligned them, it would seem that they are wearing quickly.

@Talariaboys

Жыл бұрын

Just because they are loud doesnt mean they are worn out, Brake pads just get loud sometimes or get contaminated with chain lube or other oils around and need to be taken out of the caliper and lightly sanded down and re bed in.

Hi…you guys are pretty awesome in responses. Wondering which brand pads you would recommend for stock Surron (Galfer Pro, Kool Stop, Shimano, or the MTX)?

@Talariaboys

2 ай бұрын

MTX is the way to go tbelectricmoto.com/products/mtx-upgraded-brake-pads

@Alex-oy6wb

2 ай бұрын

@@Talariaboys thanks…you guys recommended the trp brakes. They also make pads. What’s better combo? Trp with the trp pads or the mtx pads?

@Talariaboys

2 ай бұрын

The TRP pads are worth using until you need to upgrade to the MTX both are great brake pads

I’m about to order the TRP DH-R EVO brakes but I’m running the stock MX4 rotors i’ve heard a few people have had to bleed them is that true? And what other 220 2.3 rotor would you recommend for this brake set up?

@Talariaboys

4 ай бұрын

Sorry for the delay, did you get it sorted?

@windowwasherfpv3485

4 ай бұрын

@@Talariaboys yeah man already on the bike

Do you recommend the trps or the Hayes better

@Talariaboys

11 ай бұрын

definitely, the TRPs we feel they are the best option and they can be used with thicker rotors. if you are interested in getting them we have a discount code at charged cycle works. "TalariaBoys"

Can you guys compare the stock brakes on the new ErideProSS to the trp Evo?

@Talariaboys

5 ай бұрын

Trp will still be a huge upgrade for the E-ride Pro SS, it has decent brakes but TRP is a lot better

How long will it take for a person riding a Talaria MX4 to have a sore butt when driving for a long time on a flat road?

@Talariaboys

7 ай бұрын

If you ride a lot you don't get sore.. if you are new you'll get sore while building up a tolerance to it just like riding a bicycle

I'd double the front disk...

When are you guys gonna do the 19/16 setup?

@Talariaboys

Жыл бұрын

Not immediately unfortunately, Reed is planning to get a set of warp 9 wheels in 16/19 but isn't ready to spend the money yet. A 18/21 video is coming soon though!

Does any of your guys talaria make a clunking noise on the right side of the motor by the chain when going over bumpy roads or off-road? And notice it go away when throttling?

@Talariaboys

10 ай бұрын

Yes that is normal, some bikes are a little louder than others but they all make those noises to a certain extent, I think almost all dirt bikes and moto's make similar sounds you just don't ever hear them on a gas bike since the engine is loud, once you go electric everyone always complains about suspension sounds and chain rattle. Hope this helped, thanks for watching!

i gotta convince my parents to let me cop one

If i get the trp dhr evos and the 250 rippin moto rotor is it plug and play for the sting r? Thanks you guys or whoever !

@Talariaboys

9 ай бұрын

Yes all plug and play you just need to make sure to get the right rotors for your wheels and the brake caliper adapters for whatever fork your running.

What front adapter do I need for ext ferro fork and trp 223 mil rotor and dhr evo for mx4

@Talariaboys

4 ай бұрын

Just buy a warp 9 223mm caliper adapter! And you will need a 5mm boost spacer from warp 9 for the ferro as well.

I got shimano semi metallic brake pads do those still work? And do they work as good as the fully metallic brake pads?

@Talariaboys

Жыл бұрын

Yes they will still help and work fine.

what setup would be the top tier no holds barred for the xxx? full set from pad to lever

@Talariaboys

6 ай бұрын

Id say the TRP DHR Evos like we talk about with upgraded MTX Brake PAds, For rotors you could do 250mm or just do some 2.3mm thick 220mm warp 9 rotors since the xxx is smaller and has smaller wheels with less rotational mass.

@joshp2608

6 ай бұрын

@@Talariaboys right on, thank you guys for all the knowledge you provide 🤙🏼

If you only did one 250mm rotor, would you do front or rear?

@Talariaboys

2 ай бұрын

Definitely go with the front. The rear has more than enough stopping power with the 220mm rotor. Also you can keep the rotor guard on the back wheel

Does anyone make rear foot brake for this bike?

Two questions Lance do you guys have or know where i can find all the torque specs for all the stuff on the taliaria like for the rotor bolts and all the other micelanoues nuts and books on this bike. And the other question is where do you find brake pads for the TRP brakes. Thanks great video

@Talariaboys

Жыл бұрын

Here are upgraded trp pads,mtxbraking.com/product/gold-label-brake-pads/ and then select Shimano 4 piston all / TRP version in the dropdown box. I am not sure about all the torque specs, we are all pretty handy and just go by feel most of the time.

@ryanbraccialini888

Жыл бұрын

OK thanks. Do those pads fit the stock taliaria brakes to.

@Talariaboys

Жыл бұрын

Yes same pads which is cool.

@ryanbraccialini888

Жыл бұрын

Nice. Thanks guys

How do i get the rear end break to be on the left side of the handle bar because usually there built to be on the right side.

@Talariaboys

8 күн бұрын

some brakes are universal. just purchase a rear brake and a front brake and swap the hoses

@south3767

6 күн бұрын

@@Talariaboys How do you swap hoses?

Hey I got the warp 9 axle block for my mx4 (month old from lunacycle) and it didn’t quite fit in the grooves

@Talariaboys

Жыл бұрын

That's really weird that they didn't fit, all three of us are running them on ours and they fit great, I wonder if your bike frame has a slight issue or maybe its the axle block.

@Surge_Stream

Жыл бұрын

Mine didn’t fit either. You gotta shave the swingarm a little. Warp9s fitment sucks from my experience, customer service is even worse lol they couldn’t care less if stuff doesn’t fit

Hey boys, i've run my stock brake pads all the way down and need to replace them. What kind should i buy? Metallic or resin? And do you have any brands to recommend? Thanks so much

@Talariaboys

10 ай бұрын

That means you've been riding! Nice! Here is the best we've found, be sure and select in the drop down box the (Shimano 4-Piston All -TRP) as the specific size. mtxbraking.com/product/gold-label-brake-pads/

@adampampalon3840

10 ай бұрын

@@Talariaboys oh i've been riding! This bike is the absolute best thing to happen to me im fully hooked. Thanks so much for your help!!

Can you show us noobs how to change the brake pads? I love my sting R but im very new to the bike world

@Talariaboys

Жыл бұрын

Sure we will post a short showing how to do it soon

@adampampalon3840

Жыл бұрын

@@Talariaboys awesome!!!! Cant wait!!

But do the rippin moto 250mm rotors fit with the MX4 factory fork? I bought a set a few months back for mine and the front rotor didn't fit

@Talariaboys

Жыл бұрын

Great question, Yes that is the fork Reed is running the rotors on but you just need to make sure to get the right adaptor, we had trouble picking the right one at first too.

@QuantumPulse675

Жыл бұрын

Having the same issue with my front rotor too. Running Magura Mt7 pros and tried both bracket options for the 250mm rotors and still don’t fit.. please help… thanks!!!

@brianskies

Жыл бұрын

​@@QuantumPulse675 Damn so the adapter they sell doesn't even work with stock fork?

@brianskies

Жыл бұрын

Damn so the adapter they sell doesn't even work with stock fork?

@Talariaboys

Жыл бұрын

@@brianskies It does work he just didn't get the right one, we are obviously running it like I showed on camera.

Hey boys, do you happen to know the inner and outer diameters of the stock talaria XXX rear spring? I’m a bigger rider and want to upgrade it to a stiffer spring but I’m not sure if the KKE Surron light bee 450/550lb springs are compatible. Please help a fellow talaria boy out lol or do a video on it better yet! Thank you guys

@Talariaboys

Жыл бұрын

Hey sorry it took us so long to respond, I believe the xxx spring is only a 250lb so putting on a 450-500 would make it extremely stiff, unless you are far exceeding the weight limit I wouldn’t go very much heavier spring, I don’t know the dimensions unfortunately.

@drekenfps

11 ай бұрын

I have a 450 kke on my xxx

So if I bring you my Talaria will you upgrade it for me if I pay you for the work?

@Talariaboys

11 ай бұрын

Possibly what are you wanting to get done?

I bought a front and rear hays dominion break kit do I need a spacer with the stag aura floating disk rotors? Im copying Lances part list. If anyone knows please let me know

@Talariaboys

Жыл бұрын

It just depends on what size rotors you ordered? 200? 220? Also what size rotors are currently on your bike? Sting R has 220 and mx3 has 200

@alexgoran1324

Жыл бұрын

@@Talariaboys I have the talaria sting mx3 and I ordered the same break kits as Lances list so I have the Stag AURA'22 Floating Disc Rotor (Front & Rear Set) and a front and rear HAYES Dominion A4 brake kit I have default wheels and rotors and everything, I just ordered the Shinko SR 241 Trials Tires and Im unsure of what spacers to get because im very new to this ebike scene but I am very invested. Thank you :)

@alexgoran1324

Жыл бұрын

Also do I need an upgraded chain? I got these break upgrades because I just got the chi titan max 72v battery and I have a ko pro controller so I want a fast stopping speed considering I have alot more power

How do these compare to hope vtech for Surron lbx?

@Talariaboys

2 ай бұрын

The hope brakes feel great. We haven’t spent enough time using them to really know if they are better

@Alex-oy6wb

2 ай бұрын

@@Talariaboys “hope” you’re able to use them longer so we can get your opinion as to which are better

The thing about thicker rotors cooling faster doesn’t really make sense. The surface area is the same and the mass is more so it will cool down slower. If you got aluminum foil red hot (idk if you can do that) but if you could it would be silver again as soon as you took the flame of it. But it you had a 4 inch cube of steel red hot it would stay red for a few minutes at least

@oliversmole147

9 ай бұрын

Correct me if im wrong

@Talariaboys

9 ай бұрын

I get your point but it is technically wrong. Its very easy to make very thin aluminum foil red hot but its very difficult and takes so much longer to get a 4 inch cude red hot. Without going in specifics a larger rotor takes way longer and a lot more heat to reach the point where it stops working well as a brake. That's the main point is to lengthen the time before your brakes overheat and stop working.

Oh must have been face book

@Talariaboys

6 ай бұрын

What are you talking about?

The brake pads on the MX4 are horrible. I have replaced them on the first day by Shimano ones. When you compare a motorbike to the MX4 the brakes at the Talaria are so bad, you wouldn’t go faster than 10 mp/h with them 🤣

My 5 dollar break pads work fine, just would be ridicious paying for expensive break pads seeing how many I use

👍👍

"welcome back to channel" really bugs me, ngl

@jeffj5710

Жыл бұрын

I like the greeting. 🤷

@metalofthedeath

11 ай бұрын

They could make shirts and make bank

@Styles91

8 ай бұрын

The * channel 😂

@EatinBulletsForDinne

7 ай бұрын

Welcome back to the comment section

@windowwasherfpv3485

4 ай бұрын

If that bugs you, you got some issues

i love how he has no idea why more mass helps. lol

@Talariaboys

Жыл бұрын

We do know why it helps but its hard to explain on camera to those who have very little understanding, we do our best.