Great review answered my questions plus... Thank you for taking the time and making a video👍👍👍👍

Like the genuineness of this fella and his crusher. A lot hasn’t gone right and he admits it and tells it like it is.👍👍☘️

Great job on the crusher!!

Love the video! Look at that Chevy bounce.

Great video...determination - gets things done!

Chinese machines are like pre-assembled DIY kits. They're fine, as long as you take it apart and do the other $4k worth of work in making it nice.

@kevinhornbuckle

5 жыл бұрын

The Metal Butcher Made in ChinUSA.

@timeisnow9855

5 жыл бұрын

What sort of mods do they end up needing?

@davidwillard7334

3 жыл бұрын

Rough ! Chinese ! Workmanship !!

You need a conveyor to feed the crusher that will save on time and your back. Then crack a cold one, sit back, and watch it eat

Looks like it was a fun project

Wish I could find someone who imports these, or do you have a step by step guide on how to get them into the country?

Love your set up. The engine sounds like a 1 cylinder Lister diesel. Interesting mod on your Chevrolet truck. The suspension will get a good workout.

@acme663ryo

5 жыл бұрын

We have mounted the back axle solid buy yeah, the who truck is getting a nice massage.

@super6954

5 жыл бұрын

Pretty well Any single cylinder diesel sounds like an old Lister powered dump truck, it's just like anything with a .236 4 cylinder Perkins, sounds like an old London taxi. I grew up in the U'k listening to this old stuff in the 70's/80's L.O.L

@unimogdave

5 жыл бұрын

@@acme663ryo Most likely the diesel engine is causing much of the shaking. My crusher is mounted to timbers and is quite smooth. I too am getting tired of the oil flowing out. Wish there was a way of knowing if I am overfilling it.

@acme663ryo

5 жыл бұрын

@@unimogdave I retapped the oil fills for a grease fitting. So much better. Filling that main cavity took a bunch of grease and the mixture of grease and oil schmoo leaked out for a long time but it has stopped now.

Typically the Toggle plate is a fuse. It should be designed to bend before any other damage occurs.

Most jaw crushers run on different brands 00' - double ought grease. Did you switch over to 00 grease?

How about putting a guard over the belt so it doesn't remove someone's arm by mistake?

Looks like it would shake your truck to pieces, look at that flex.

Thats not the first time your mother in law's S-10 has bounced like that!

Cherry the shaking Chevy? She sure dances well!!!

I don't know witch was better the jaw crusher or the high flyers

I'm looking to get one in the next few weeks, also from China. Any pointers you can offer will be greatly appreciated.

love this idea, what were the import fees?

High silica content will ring out for sure when being crushed

I am thinking about ordering a Chinese rock crusher from alibaba.com. Any thing you suggest I look out for?

So would you buy Chinese again or go with another brand? How much was the up front cost before having to dig into it and fix/correct all the mistakes.

@acme663ryo

4 жыл бұрын

I am not sure you could find anything not Chinese. Probably $6000 to functional or about half of what you could get one in the states. Even that would just be another Chinese model just higher quality maybe and with some service options. Having run it i think unless you have a need for a small unit for your own purposes you ste miles ahead just having your rock trucked away or gravel delivered. If you like dicking around with stuff like this like I do then ok. It will never "pay" for itself, too slow, too much of your time.

At least you have enough road gravel

What is the name and model of the crusher? Thanks!

2 small bottle jacks or flea market screw jacks will take most of the bounce out of the truck, just in front of the rear tires each side

The frame of the vehicle is flexing, that's going to lead to a failure of the vehicle.

@acme663ryo

5 жыл бұрын

We have spent a bunch of time checking and the best we can tell the frame isn't flexing at all, the body is flopping around on the rubber mounts. Time will tell I guess.

@RandomPlaceHolderName

5 жыл бұрын

Guarantee you that vibration can't be good for a vehicle.

thanks for the great video! like 15 years ago I was looking high and low for a small jaw crusher. now they're pretty plentiful; at least not totally rare like they were! What kind of rock do you have there would you say? I like how it cleaves nice and square! For driveways, I hear an impact crusher makes the gravel less sharp. Those are now hard to find, but will probably also get more available in the small sizes. Thanks for sharing! I wonder if the Indian units are any better.....Saw a 10HP electric impact crusher online from Portugal the other day. Still trying to get my inquiry responded to lol

@acme663ryo

4 жыл бұрын

Our rock is a quartzite that varies from hard to OMG hard. Sometimes it makes a noise like breaking glass. I could see it being too sharp for a drive but once down it stays in place.

@CuriousEarthMan

4 жыл бұрын

@@acme663ryo that all makes sense! thanks for sharing!

Leave a window open just enough to leave a bit of wire hanging out connected to the door lock or get another set of door keys made up :)

@billhacks

5 жыл бұрын

I agree. keys are cheaper than windows. :)

Thanks for that ..😁

Well you certainly like punishing yourself crushing rocks, Maybe you should buy a licence plate stamping machine and an orange jump suit to L.O.L. I think if I was doing any amount of crushing with that machine I'd figure out a hopper if the machine would take it, and load the rock pile with the rear bucket on the backhoe, at least you'd be sitting down for a while . I'd guess that other company spends a lot of time going through and fixing/ modified the machines for their money. I used to be a dealer for Russian made Belarus tractors, some of those were interesting with quality control to! I've been told the Chinese build one machine/part to many different price levels, the more expensive they get the less crap they are. so yours might be the $400 version, but if you have the $1500 one it will be way better or even perfect. Thanks for the video's you definitely aren't afraid to try different things and show the world how it turns out, good or bad. Take care

@davidwillard7334

3 жыл бұрын

So How Much !!?? Do ! You ! Want ! To ! Spend !!?? Then ??

@super6954

3 жыл бұрын

@@davidwillard7334If you buy a hard working machine like a "Rock crusher" for $400 thats made in China and is totally unreliable crap that needs improvement or constant fixing. When the $1500 one works right and is reliable It answers it's self how much a guy should really spend. I still work fixing heavy equipment thats basically worn out . It costs a guy a fortune and it still isn't worth the time or money afterwards. They'd of been better putting the money in another machine that was worth it, and been happy at the end. Those guys are operating on a totally false economy trying to save money, thats actually costing them more in lost time/ production and profit later . I'd bet if the time taken and the costs were put in on this job at true hours/ value it's not worth crushing the free rock there. Truck loads in many area's are probably cheaper from a large industrial machine and just spread it where it's needed ,and use the saved time to do something else.

@davidwillard7334

3 жыл бұрын

@@super6954 There's ! NO !! Easy ! Way ! OUT !!

Is the big wheel on the other side just for added and balanced inertia to match the inertia from the big wheel with the belts?

@acme663ryo

5 жыл бұрын

Yes big balancing flywheel.

"Exhausting but fun" .. oh yea!

Today I smashed quartz stones with a sledgehammer. Dammit! I want a crusher machine.

@acme663ryo

4 жыл бұрын

You might find a company that would come in and do it for you real quick.

Is this the 250x400 model ?

Need to build a 3 foot high ramp and park the Scrusher on it so you use the backhoe to haul off the crushed rock.

@acme663ryo

5 жыл бұрын

Find a bank to back up to.

Hope you can help me find one

How to change the output of the grainsize ? Increase speed or change the jawplates ?

@acme663ryo

4 жыл бұрын

There is a threaded rod you can tighten down to close up the jaws, I leave mine open to speed up the crushing as I do not require small rock.

Nice!!!!

That poor truck looks like its made of jello.

@acme663ryo

5 жыл бұрын

I imagine it will be soon.

@johndowe7003

5 жыл бұрын

@@acme663ryo how much was the crusher?

If you don't mind my asking, is your property located in Sanders County?

@acme663ryo

3 жыл бұрын

Yes, by Paradise.

@willong1000

3 жыл бұрын

@@acme663ryo Thanks for the reply. I thought that the terrain and vegetation looked familiar. I've passed through there numerous times traveling between Port Angeles, WA, and a commercial property that I own in Polson, MT. I used to own a commercial property in Kalispell too; but I sold it this Fall and acquired a little over half a section east of Clinton, just past the Beavertail exit. There's a few lifetimes of rock-cracking opportunities on that acreage, which is why I am watching crusher videos and reviewing other sources of information. I found your candid review and opinions quite helpful. I'm leaning toward purchasing an MBMM 16x10. I was already inclined to buy American, but found the price difference of Chinese crushers was tempting. However, the frustrating communications process with the Chinese just to get a price quote already had me leery of going that route. Your experience with poor quality and importation hassles, particularly undisclosed fees, definitely has me now favoring the MBMM product. Their website states, and their recent videos seem to confirm, that they manufacture their own brand of crushers right here in WA. I intend to visit the factory in person before I make the final purchasing decision. In the meantime, I'm watching a few used crusher auctions up for bids online. Thanks for posting your video and being open and frank about your experience.

@acme663ryo

3 жыл бұрын

@@willong1000 I think you will get a better machine from BMMM than what I have here. I saw that they are selling a crusher and parts out of Butte right now. One of the public surplus sites, Public Surplus i think.

@willong1000

3 жыл бұрын

@@acme663ryo Thanks. I found an article about Butte-Silver Bow county planning on selling their crusher and asphalt plant, but I couldn't find an auction listing--I think it is likely completed. Probably way beyond my budget anyhow. What are you using to reduce larger rocks to a size that will fit your crusher? I just bought a Skidril 180 with the thought that, since I don't have to make wages when just working for my projects, I can drill and crack larger rocks with plugs and feathers.

More thana year has passed. Is it still working?

@acme663ryo

4 жыл бұрын

Yes.

Hope you don’t get your sleeve caught in that unguarded pulley wheel

Fix the truck where it will run decent for little to no money and weld the diff. You would be amazed where ya could go. It’s pretty much the same as a so called “2 wheel drive” 4wd without lockers. 👍

Hi A Question did you buy ebay correct How is name ebay posts ?

@acme663ryo

5 жыл бұрын

I would have to look it up, I will try doing that and get back to you.

@miguelmiguel8652

5 жыл бұрын

@@acme663ryo okay let me know I want sure who is the seller

This big of jaw crusher US made would be more like 11-12k

How was the tarrifs on it?

@acme663ryo

5 жыл бұрын

Import fees and what not were about 30% of the whole price.

@smokinvr4

5 жыл бұрын

How well does the diesel run now a few months later? I have an 8x12 jaw on order..no motor

Your little S10 is gonna break in half like a spoon that is bent back and forth until it breaks with the way it's bouncing like that, lol.

@acme663ryo

5 жыл бұрын

So far she is holding together!

@peterkirichumwangi3826

5 жыл бұрын

I am interested with crusher not the pick up.

By chance are you done with it and interested in selling?

@jingjingcui8080

5 жыл бұрын

Hello,dear. want to know 【price & details】about 【rock crusher】please click web:www.hxjqmachine.com/pro/stone_crusher.html?cjj&yut 【my whatsapp】api.whatsapp.com/send?phone=8615538215091

Hi @NelsonStudios ,my name is James and I am interested in buying a 80ton Chinese crusher for a client with a tight budget, I've gotten 3 quotes so far . One seems dirt cheap at 14k , the other two are evenly priced at around 17 and 19k I wanted to know what I should look out for and any modifications I might need to make to it before I give it to a client . In my country most Crushers are Chinese so customers are used to them but I just want to do the best for the client.

@acme663ryo

3 жыл бұрын

That seems crazy cheap for 80tons of anything. I have had issues with poor casting and sloppy machining on my little one.

@llewellynjameskinnaird2741

3 жыл бұрын

@@acme663ryo thanks for your reply. It does seem too cheap.

That’s awkward, getting chemtrail footage while crushing rock..

How many years of tossing in rocks till you break even

@acme663ryo

3 жыл бұрын

All of them maybe

I used to crush small rock by hand with a paver stone

@chinaminingstonecrusher1105

4 жыл бұрын

hello friend, we can provide you the rock crusher quotation to visit our website:www.chinafote.com/product1.html?lyy more details add my whatsapp:+8615518108838 Email:joyxiaogongju@gmail.com

Im interested in one of these crusher, how do I get one?

@yinglee6808

2 жыл бұрын

you can get crusher details from here:www.fte-china.com/pro/jaw_crusher.html?lylt

كم السعر بدي بواحده

Yes the world would stop turning if you drop a " die" down the throat of a jaw crusher, it will bend or break the shaft no questions

Made in China? Dare i say the rocks will break that crusher rather than the other way around?

your chassis is gona snap in half. put it on a trailer with lifting legs

@acme663ryo

5 жыл бұрын

Despite how it looks the fame isn't where the flex is coming from, it is the body mounts under the cab. It is however shaking everything in the cab to death so I will have to do something.

@mrmcclung

3 жыл бұрын

@@acme663ryo a couple swing legs for trailer attached to bumper should fix & not cost to much. Am looking at a 2x4 or 4x6 to import, Stay Safe

to answer the question how to make money with it. start mining a lode mine hire crushing out to gold miner jaw crushers are very notorious at spitting rock out the top. it's part of the fun of one. I have many years working with rock crushers in rock quarries. crushed rock is cheap. the money is made by volume. not really sure why you spent $4k to crush you small amount of rock, but hey it's your thing. that crusher should do at least 10 yards an hour. do not feed it with a conveyor. you need a feed tray. but you should put a conveyor under the truck. to answer another possible question. like I said that crusher looks to be max 10 yard per hour. to sell crushed rock you need at least a 75 yard per hour. plus you need screening equipments. right now it looks like you are making inch and half minus. with a lot of minus. through adjusting I would guess your crusher can make 1/4 to 2 inch.

@chinaminingstonecrusher1105

4 жыл бұрын

best regards! our company is more than 40 years of China professional mining stone crusher and ore process machine manufacturer&exporter. you can get the quotation to visit our website:www.chinafote.com/product1.html?lyy my whatsapp:+8615518108838 Email:joyxiaogongju@gmail.com

Información por favor..número de contacto.. Gracias

@yinglee6808

2 жыл бұрын

you can get crusher details from here:www.fte-china.com/pro/jaw_crusher.html?lylt

Oh dear oh dear hahaha

I reckon that set up will wreck your vehicle

@acme663ryo

3 жыл бұрын

I think there are some clear signs that this might be hard on it.

No I'm not want one of them I'll get an American-made one

@acme663ryo

3 жыл бұрын

Used crushers in good shape are hard to find. To my knowledge there are no small US made units in production today. There are better than this out there however.

your going to break that truck in half, not because it's a chevy, I like chevy, but because you can see the cab and box flexing at different rates, not good

@acme663ryo

3 ай бұрын

No doubt eventually. After locking the rear suspension solid its better but still ridiculous. Been a few years now but she's still holding together.

@jetegtmeier71

3 ай бұрын

@@acme663ryo WOW that's really good if it's made it a couple of years already

@acme663ryo

3 ай бұрын

@@jetegtmeier71 I think most of it is in the cab mounts, it flops more now the poor thing.

This crusher killed your truck and the truck will kill you one day .

oh dam rock grinder in a chevy puck um up truck,,, what is your over all goal here,, ? is thos proof chevy s10 are shit truck?