I bought one. I was at Lowe’s for something else and I couldn’t resist picking one up to go with the DeWalt driver/drill I got for Father’s Day. Nice add to the DeWalt tool bag that the drill comes with. Thanks.

I use this bit holder... It's very practical and handy. Nice video.

I like the idea of these bit holders as a means of holding the screw for one handed work , but i have rarely ever needed one . My left hand is the ideal screw holder and i have never misplaced it .

That bulky head is a hassle for me. Tnx

2:14 A mechanic don't use construction, deck screws or even general purpose screws. Screws are usually used on some interior trim pieces, but you don't need a power tool to loosen or tighten those.

Saw your video and had to order one!!! The item I didn't know I needed so bad!! Thanks

Great idea to incorporate right into the impact driver itself. Like the Ridgid (except the magnetic is still missing in the Ridgid).

I've had this tool for at least 5 yrs and dug it out of mothballs, because i was building a wooden fence and got sick and tired of dropping my screws on the ground and used it for the first time yesterday and loved it.. ps the only draw back i have found is when the screw is set the tip bounces out , but not always tried the dewalt , but the magnet kept breaking and i have two of the dewalt holders featured here.

Thanks for 5he tip, purchased the kit. Now I know what that bit will do.

I been using that for a few years now, I also have its bigger brother the 6" extension with the magnetic ring, after using these bit holders I couldn't imagine life without them. Nice review 👍

@ToolReviewZone

4 жыл бұрын

Thanks Gravity! I agree, they have all been pretty cool so far, but I have a few more up my sleeves

The silver ring on the end with the magnet is removable. Useful when removing a screw that was recessed to deeply or if you need to clean metal particles that collect on the magnet!

@ToolReviewZone

4 жыл бұрын

Thanks Geoff! I actually forgot to add that to the video, and was kicking myself right I'd the butt for it!

@lazycarper7925

3 жыл бұрын

geoff are these good bits, or should i get a different make eg wera or makita?, thanks

@geoffgranger718

3 жыл бұрын

@@lazycarper7925 Wera is my preferred still. The dewalt will get pulled into action if I want the stronger magnet. Never used the Makita version. The dewalt releases when you pull back while the Wera releases by pushing forward. This difference prevents the bit from being accidently released when driving a screw in to deep.

@lazycarper7925

3 жыл бұрын

@@geoffgranger718 thanks wera is 10 quid, the dewalt is 7 quid, would you still get the wera based on that price?

@geoffgranger718

3 жыл бұрын

@@lazycarper7925 Yes. This is one of the beefier items from dewalt, however dewalt can be more hit or miss to quality. Wera does use more plastic but not in a way to reduce quality. Unfortunately the plastic does feel cheap.

As a hardware installer I love the pivot holder, no quick release mechanism but it's super handy for tight situations and I keep a pair of needle nose pliers to switch bits which I don't have to do often because I mainly use Phillips screws. It is magnetic too.

@ToolReviewZone

4 жыл бұрын

I actually just bought it, but haven't had a chance to use it yet. I've heard a lot of good things about it though

It looks great but I embed screws into wood at angles and close to inside corners. It's a no-go for my purposes. I'll stick with the perennial drywall screw gun style magnetic bit holder with which there are no restrictions. I love innovation in any case.

Would like it, would love it with your suggested improvements.

As a mechanic, I’m relieved to know I’ll no longer be dropping wood screws into my engine with this attachment.

I like these, but when I don't want a magnet on the end, or a need a longer reach, I go with an impact extension made by Bosch - them come in 6 or 12 inch lengths. It has a blue ring that you pull to release the bit, and I've never had any trouble getting a bit out of it, or had a bit fall out when in use.

Just what i need!

I have the Dewalt angle bit holder,it fits into my Bosch 1/2 /1/4 square drive impact driver, it is just right to fit in the pull back locking collar, I am amazed I never had one before,and the magnetic hold is ok,

I hit the like button around the 8th or ninth “cool” lol too funny bro. This is the first TRZ video I’ve seen so I’m headed over to the channel now to verify whether I shall be ringing the esteemed “bell notifications.”

@ToolReviewZone

2 жыл бұрын

You are the man Jay. Thanks for the comment brother

I like the Bauer bit

Thanks for demo, must get one

Hey Clint! Great Video! I just got the Milwaukee version in the mail and gonna put it to the test. I might even purchase the DeWalt and do a comparison video. Awesome review dude, thanks a lot!

@ToolReviewZone

4 жыл бұрын

Thanks John! Keep up the great work bo

Nice review. I will look for one of these. If only it came with a stainless steel magnet.....

I have the little yellow one. It does the same job, but it is much more of a pain in the ass if you are changing bits alot. To the good, it is a more compact setup. Depends on what you are doing and where you are doing it, I suppose.

this would be a cool bit holder to talk about I own the same one Bosch ITBHQC201 2 1/4", Impact Tough Quick Change Bit Holder

Thanks , but as a mechanic my main issue is bit breakage I’ve been using Irwin bits for last year but last week I broke 3 🤢 they just can’t win on these as if not hard enough they strip if to hard they snap. The heat treat is hard to do when cost is the goal

Currently clearance at tractor supply in a small kit. 5.99 with 8-10 black DeWalt 1" drive bits. Grabbed 3 of them. Magnet works great. As for the lock and release it works okay but compared to my Wiha locking bit holder the manufacturer quality is night and day. Action of the Wiha is easily superior. Feels very precise and tactile

As a… mechanic? If any mechanic I know is trying to fasten machine thread bolts at a 45 degree angle like a self threading wood screw, consider them fired. You have truly spoken like somebody who’s never been in the trades.

That's cool! Thank you!

I’m going to try this bit!

My thoughts on this attachment were 1:30

Thank you

Ha ha ha, I have this bit holder and it is a very cool addition to my DeWalt tools

I tried it. I like it. Does good things. Good addition to the tool box.

@ToolReviewZone

2 жыл бұрын

Thanks for the feedback Hubby

I love the bit driver but Rigid impact driver has this feature built in with the 1 hand bit removal.

The magnetic holder is amazing, helps one handed driving of screws. But this looks to me like they've ripped of Wera Rapidaptor as it's effectively the same thing and been out over 10 years.

Great review Clint 👏

@ToolReviewZone

Жыл бұрын

Thanks Fab 👊👊👊

i have one of those exact pieces, and another one that is a bit beefy- ier one that came with a screw driver (dewalt), i love those things, but i'm having a problem finding them locally anymore, i've had mine for at least 5 years and they are finally getting a bit beat (no pun intended, it just worked out that way) i spray them occasionally with whatever lube i have on hand, and occasionally blow them out with the air line at work (auto body, 120 lbs per sq ft of pressure) and they still work, it is a permanent resident in my main drill driver

I was so impressed with the video, I just ordered one off of Amazon. Just too lazy to go to Lowes to pick it up. Barry

@ToolReviewZone

3 жыл бұрын

Let me know how you like it Barry!!!

For roofers the ejection tool (like on the Bosch) is a little bit too good... some bits get thrown out and you have climb to find your expensive little tool.

Siiiick intro!!!🔥

What if your driving screws at an angle? Does it set the screw below the surface?

Wera ring magnet! With that, it releases the bit by pulling the collet forward so it won’t drop the bit or release it if you overdrive the fastener. The dewalt will get pushed back by the material you’re fastening and then release the bit. The wera has much better construction than the dewalt as well.

@puppetmasterblaster

2 жыл бұрын

and three times the cost

Certainly makes job easier.👍👍

Oh man I thought it had a swivel feature there for a second. This is another I'll most likely add to my other bit holders. Great job on your videos.

@ToolReviewZone

4 жыл бұрын

I actually have the one with the swivel head slams. I haven't used it yet, but I'll be posting the video this week. 👊👊👊

@slams7783

4 жыл бұрын

@@ToolReviewZone Awesome, looking forward to it. I just picked up the Makita Gold and will be using it soon.

i have the same type of holder but its METABO it wass in the bit set i bought 20 years ago

Great video Clint

@ToolReviewZone

4 жыл бұрын

Thanks Antonio!!!!

@AntonioClaudioMichael

4 жыл бұрын

@@ToolReviewZone sorry about the link bro was just trying to help

I know older videos but I have one use it in a lot of times good investment 👍👍

Have one and I've used it regularly. No sign of wearing out or getting wonky.

I have this type of bit by Dewalt but the tip is plastic but it releases the same way. I also have the dewalt plastic magnetic sleeve too. I like this being all metal. Keep the quest going.

@ToolReviewZone

4 жыл бұрын

The quest shall continue my bro!!!!!

@XD45OWNER

4 жыл бұрын

The metal one is much more robust and adaptive than the plastic dealio, I have the plastic ones also but I never use them...

I like that bit... thanks for the GREAT VIDEO and your thoughts too.

@ToolReviewZone

4 жыл бұрын

Thanks for the feedback and comment campmeim!

Great video thanks,but for me the best is Wera Suporte drill bits👌👌👌 lenghts here from Portugal 🇵🇹🇵🇹🇵🇹

Many thanks for this, I will have to get one. Kind regards, and greetings from Africa.

@ToolReviewZone

3 жыл бұрын

You welcome David!!!!!

I went online and ordered one. Simply cause j made me chuckle with the cool cOOl Cool Cool.

@ToolReviewZone

4 жыл бұрын

Haha, thanks Chance!

@Redfour5

4 жыл бұрын

@@ToolReviewZone Cool

@dwightman891

3 жыл бұрын

where can i order it online?

Great tool

I absolutely love the idea of it being a magnetic bit holder. However, as far as using it for small framing tasks, I can't see how the head of the screw will self-counter sink when toe screwing through the end of a 2x4 like you can with a commonly used straight shank bit. It seems the shoulder on this bit holder would be prevent the countersink. I could be wrong. Anyways, nice locking feature.

Does this product hold up well screwing it on metal surfaces constantly?

so what's the best bit & screw holder?

That is definitely ... *COOL😎👍💯 KOOL 👀👍KEWL 🤩👍Cewl !!😍👍💓*

@ToolReviewZone

4 жыл бұрын

SO KEEEEWLLL!

Maybe they'll make on of the same with a stronger magnet. Lets hope

Love it Sir 👌👌

I wish the business end didn't have such aggressive knurling to help prevent scratching the work surface if the head brushes over the material stationary or while spinning. Otherwise, it's a really good design utilizing one handed operation. Perfect for ladders and tight spots.

I just bough the impact driver is it normal for the chuck to have some play to it?

Does it require special bits or any short ones will do for holding a screw ?

I like the look of it closest bit holder I have to that dewalt is my Bosch it has a collet like an impact driver but the bit is not seated as low as the dewalt version

The perfect drive was made over a century ago: Robertson. The bit will hold onto the screw like nothing else. So much so that it's sometimes difficult to remove! Overall, better than Phillips.

Amazing

I'm buying it right now!

@ToolReviewZone

4 жыл бұрын

Let me know how you like it Jose👊

@dwightman891

3 жыл бұрын

@@ToolReviewZone what website can i buy it?

Yep, will get it next home depot trip

@ToolReviewZone

4 жыл бұрын

Let me know how you like it Howie!

Cool tool

Cool, I dig it

Can u use large sockets say in a garage on cars with a hex head impact end driver and use to drill metal wood and masonry and concrete

Got a new link on where to purchase this, the one in the description doesn't go anywhere?

This tool won't work on stainless steel screws. It just drops down from any magnetic bit holder when I installed my composite deck.

very nice job well done keep up the good work

@ToolReviewZone

3 жыл бұрын

Thanks David!!!

OMG! All this time I've been yanking it out with pliers. Tried to remove the inner ring many times to loosen the grip without success. I go to my toolbox, wrong dewalt bit holder. Still need pliers.

Metal stud framing 👍

Nice video can it work on cement to ?

my brother gave me a dewalt dc925 xrp and it's not working and i wanted to change the brushes to see if that will make it work. but i don't want to spend money on an impact wrench so my question to you is can i buy the dewalt impact wrench adapters 1/4 3/8 and 1/2 to change parts on my car so please let me know

This bit isn't bad still love my makita magnatizer little better but it's a good set of accessories

COOL!

This is my favorite part too 😍 Waaaaaaaaaa!!! Cooo😂😂😂oolll!!

I actually switched from my number two Milwaukee tips and I started using my DeWalt number two DeWalt bits just because they are magnetized the only thing that's stopping me from purchasing one of these is the fact that sometimes you got to get into tight spaces especially hanging cabinets or Windows

Works good. I likes.

Great videos. Thanks for making them fun and interesting. Can you provide a new affiliate link to purchase this bit? The current link doesnt work . I’d like to order one and give you the credit.

Looks like the Irwin Lock and Load

Cool stuff ! Home Depot have them?

Link in description is dead.

I was about to say are you starting a collection of magnetized bit holders but it's great because we'll find out which one is the best one

@ToolReviewZone

4 жыл бұрын

I may need to mortgage the house for how many are out there lol. I've actually tried a few that I just tossed out because they were crap, so only putting the cool ones up

@josephmalinowski6817

4 жыл бұрын

Tool Review Zone lol maybe you do have a lot or maybe you can give them away

@Redfour5

4 жыл бұрын

@@ToolReviewZone Tell us the names of the crap ones so we won't waste our time...

What is the difference between this and the regular DeWalt magnetic screwdriving bit drive guide with the sleeve? Don't they both do the same?..... I am sold. I am going to get the DEWALT TOUGH GRIP 27-Piece Steel Hex Shank Screwdriver Bit Set at Lowe's today as it is currently on sale for only $9.98 (retail $19.98) and it actually comes with this Tough Grip rapid load tool as well as the regular magnetic screwdriving bit drive guide too. It even comes with 4 hex drill bits too. I compared the Tough Grip rapid load tool to this magnetic screwdriving bit holder and the difference is a "SureSet magnetic fastener holding system".

I was watching this video, when my wife walked in during the "Whaaaaaaaaaa? Cool! Cool! Cool! Cool! Cool!... " segment. She said, "That guy's weird, Danny." LOL!

@ToolReviewZone

4 жыл бұрын

Lol, can't say she is wrong hahaha

@dannyhale7645

4 жыл бұрын

LOL!

@dannyhale7645

4 жыл бұрын

@Fretboard Burner, she was walking through the living room, into the kitchen. She was actual cooking my dinner at the time. So I should get bonus points.

@dannyhale7645

4 жыл бұрын

She made cheeseburgers for supper, which are technically sandwiches. So she was actually just passing through on her way to make me a samich.

What is the “Makita magnet we’ve been using” that is stronger than this one. Model please. Thanks

@mynameisgladiator1933

3 жыл бұрын

Type makita in the youtube search box. Don't be lazy.

@Zink66

3 жыл бұрын

@@mynameisgladiator1933 Yes, like Makita only makes magnetic bits, nothing else is going to show up when you type Makita 😒

@VerticeTreinamentos

2 жыл бұрын

@@Zink66 kkkkkkkkkkkkk

What I don’t like with screw adaptor is it become Wabble when you screw it.

Will it drive a sheet metal screw into sheet metal?

I’m assuming these wouldn’t keep a fastener magnetised whilst using a 50mm long bit as opposed to the little bits as it would be too far away for the magnets to pull the screw ?

@Stewie-hb4rh

3 жыл бұрын

really would depend on what material the 50mm bit is made of.

Thank. Please give the model number of this bit

is this adapter have a model number? ask because i want to buy it . i went to HD they don't have it n LOWE'S they don't know what is it. thanks for the video. have a nice holiday. BE BLESS

link does not work. what is the part number and name of this dewalt device?

That’s cool. Also congratulations on 28k

@ToolReviewZone

4 жыл бұрын

Thanks Dan Da Man!

Where do you buy this adapter?