I really like some more of these kind. Demonstrate more.

@gregvancom

Жыл бұрын

More vaulted roof framing videos can be found at our website, unless you want something else, then provide more details.

Thank you very much for amazing sharing

@gregvancom

4 жыл бұрын

Glad you enjoyed it and thanks for watching.

Great video and very informative. I was wondering if you could help me with some questions reguarding my wife's mother's home remodel that I have been helping her with. I have a few pictures that may help with the details. The main question is, are you able to cut back rafter tails if a past addition had left them in on the new interior of the room. Everything is already built and drywalled in, they utilized an existing patio door as the entry way into the new room, but they left the soffit and rafter tails. Thank you for your time.

@matthewrose6865

4 жыл бұрын

(From your video's, it doesnt seem as though the rafter tails bring any sort of structure or support to the walls or roof, if my understanding is correct)

@gregvancom

4 жыл бұрын

Yes, most rafter tails are going to be supporting anything and can be cut off. Just make sure they are not structurally supporting something, before removing them.

Hello my house is designed just like this, and I wanted to add the same addition the way you demonstrated. But how or can it be done to add that addition to entire length of the house. If you can make a video for that I would greatly appreciate it..

@gregvancom

4 жыл бұрын

I will put your video suggestion on a list of videos to be made in the future.

Greg, thanks for the video, very helpful. If I have an existing hip roof with ceiling joists, and want to remove the ceiling joists & create a gyp board finish at the roof rafters for a cathedral ceiling, do I still need to support the hip roof with a post and beam? does the existing ridge board need to be reinforced with a ridge beam?

@JonVanO

4 жыл бұрын

further, I would only be removing the ceiling joists for the portion of the hip roof, which continues to a gable roof, where the ceiling joists would remain wondering if this would provide enough structure that does not require reinforcement. the total length of the hip roof where the ceiling joists would be removed is 11'. posting an image would be easier but unfortunately I cannot do that. do you have an email I can send some images to?

@gregvancom

4 жыл бұрын

Keep in mind that I cannot provide you with structural engineering advice, but most of the time a ridge beam is required, along with using larger lumber for the hips, if you're going to remove the ceiling joist

@gregvancom

4 жыл бұрын

You can get our email address at our website, if you need to send pictures.

If the original structure has a gable roof, and the addition will be hip/vaulted, do both structures need the footing or just the addition?

@gregvancom

6 жыл бұрын

That's a difficult question to answer, because it all depends upon how the original structure and new-home addition are going to be built. Normally though most homes have building foundations and home additions do also.

Great video, graphics always make things so much easier to understand and for me personally allows to imagine in my head a design and where future loads would have to be transferred to.. what type of beam Would you suggest for the add on where the load bearing wall was removed? You could get away with steel potentially couldn’t you to keep it lower profile vs having a few gluelam beams nailed together.. what about a scissor roof meeting at a 90* Corner?

@alexinman8391

Жыл бұрын

'

Could you make a video of how to make a porch on a house similar to the one you made here but without walls. Could you help me sending me a video to make an extended house & what items I need to make it so it could soft & facet. Could you please do that? Thank you!

@gregvancom

6 жыл бұрын

This might help www.homebuildingandrepairs.com/home_additions/index.html

Great design and explanation. But how would the design look to accommodate ceiling insulation for code of R-49 which is 14" thick for this vaulted roof framing?

@gregvancom

4 жыл бұрын

I'm pretty sure I already answered your question in another video, but will answer it again so others with the same question might be able to make sense out of it. You would need to use larger framing components like 2 x 16 roof rafters or find smaller insulation that will fit inside smaller lumber. Keep in mind that your video suggestion has been put on a list of videos to be made in the future, I just don't know when it will be made.

@DavidGalan777

4 жыл бұрын

@@gregvancom That's what I was thinking was the solution but haven't seen anywhere in all google youtube land where this is addressed. Thanks!

I have a 32x 32 house with a hip roof..I want an addition with vaulted ceiling as well as stairs and 2 bedrooms and small washroom ( 14 x 32 )...could you make video for this please

@gregvancom

4 жыл бұрын

Thanks a lot for watching our videos and supporting our channel through comments, watching ads or even purchasing some of our books. Without your help, I wouldn’t be able to help others. With that said, you’re receiving this email because the question you’re asking requires something I cannot provide you with. I do not offer any paid services at this moment in time. This would include building design, building design suggestions and building plans.

Do you have a video on how to extend a two storey living room?

@gregvancom

6 жыл бұрын

I do not have a video for that and put your suggestion for a video on my list of videos to be made in the future. I will put a link here when it is completed.

@JoanlynCreviston

6 жыл бұрын

Thank you! Hope to watch it here soon.

Sir can you help us with our roof design? Our exsisting design is like this video L-shape, we are planing to make have an extention on L sidehow is it possible?

@gregvancom

3 жыл бұрын

Here's a link that might help. www.homebuildingandrepairs.com/home_additions/index.html

what is the ridge beam size must be if u go 18 foot high

@gregvancom

6 жыл бұрын

You would need to contact an engineer for that information.