Please send me your videos. WhatsApp 07725 692699 Thanks.

Very informative and good tips with the light through holes, thanks.

Hi there, I am an x motor mechanic and I regularly watch your videos on boilers. Your work is very detailed and informative and I really appreciate it

Thanks Allan and Elliot for posting and passing on your vast knowledge.. Much appreciated

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Another great video Allen. Keep em coming. I’m not a plumber so won’t ever touch gas but still enjoy you videos. Nice to see someone who takes pride in their work.

@AllenHart999

3 жыл бұрын

Thanks 👍

Great work Allan and friends

@AllenHart999

3 жыл бұрын

Glad you enjoyed it

great video guys

As always you are great Allen as well as your videos

@AllenHart999

3 жыл бұрын

I appreciate that!

Where the crack is on the old sump is where the moulding machine holds the sump during manufacture. The new sumps are same material but the spot where held during moulding is an inch or so to the right on the corner where the composite is thicker.

@AllenHart999

3 жыл бұрын

Thank You for the feedback.

Another good video - thanks for sharing 👍

@AllenHart999

3 жыл бұрын

Glad you enjoyed it

Great tips...🤘

Good video guys appreciate it. It definitely does help. Many thanks. 👍.

@AllenHart999

3 жыл бұрын

Glad it helped

Really good video again fellas, dont see many ideals in my area so yet to come across a cracked sump

@AllenHart999

3 жыл бұрын

Thanks.

Tanx for the upload Gents👍

@AllenHart999

3 жыл бұрын

Our pleasure!

Ideal logic are one of the most common boilers I have one, So thank you for as many things on it as possible, I have better understandings on it, thanks to you, Once again great video Alan and wishing all the best for family, friends and all people in these troubled times, stay well and good 👍 Bless.

@AllenHart999

3 жыл бұрын

Thank you very much.

@apprenticelogic6642

3 жыл бұрын

Oh jayyysys

Good video Allen and Elliot! I have recently fitted a Ideal Vogue system 32kW and I do like it. Stainless Steel HX much better in my opinion than aluminium. Keep up the vids!!

@AllenHart999

3 жыл бұрын

Thank you.

Great video

@AllenHart999

3 жыл бұрын

Thank you for taking the time to watch our video.

Great video ...

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Very good video 👍👍

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Hi Allen. Keep up the great videos mate. Would love a full video on the water heaters (how they work, things to look for etc)as they are old school and I’m not to up on them, do all new stuff ok but these not so.

@AllenHart999

3 жыл бұрын

Thanks for the idea!

Good work Al

@vahidkaregar8049

3 жыл бұрын

Good video, thanks Allen

@AllenHart999

3 жыл бұрын

Thank you kindly

He knows his job 👍

@AllenHart999

3 жыл бұрын

Thank You.

Good video

@AllenHart999

3 жыл бұрын

william jones Thank you.

More tricky on the exclusive boilers less room 👍

@AllenHart999

3 жыл бұрын

Absolutely

Ideal logic 👨🏼‍🔧

@AllenHart999

3 жыл бұрын

👍👍👍👍

Nice one Allen nice one Elliot, I’ve fitted one of those water heaters years ago and after 15 years the client finally got me to service it, one thing that could be mentioned which is a common fault after years of service, if the hot water is not great always check the water governor for a split diaphragm 👍🏻

@AllenHart999

3 жыл бұрын

Nice one

Great video mate. Does Elliot have his own channel full? I think he does great videos cheers Alan

Still come across a few of the old Water heaters. On the logics do you do a full strip every year, I put my scope camera inside and if they look good just clean the electrodes, and run a bit of water through with my specially adapted water bottle.

@AllenHart999

3 жыл бұрын

Thank you for the feedback.

Love the videos. I’d love to know how and why would people actually thumbs down these videos 😂😂😂😂

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

great vid as always thanks to Elliot as well. in the next 10 months will have to see if you service a Vaillant ecofit pure, i have fitted four but do not like anything other than the 10 yr warranty and price about them, back to Ideal`s

@SalimKhan-gk1fh

3 жыл бұрын

I had to fit an eco-fit pure recently there was nothing I liked about it but I talk the customer into getting a Viessmann and they are a lot lot better

@efrygasservices6169

3 жыл бұрын

Hi @32dartsking I haven’t yet serviced a Pure but have carried out loads of services on the energy which are almost the same. Both interim services and the major projects service with the Mai heat ex seals replaced. I shall try and film the next one I do.

@AllenHart999

3 жыл бұрын

👍👍👍👍

Excellent video - thank you. As an ‘interested consumer’ why are these plastic composites cracking? Bad design, wrong materials, thermal cycling, acidic attack? Has the manufacturer ever fessed up? Looking at the one where the screws were examined it does appear the crack may have its in origin in the receiving threaded hole which may be the ‘stress raiser’. Sorry lots of questions but that’s the engineer in me - would be interested in your views?

@AllenHart999

3 жыл бұрын

Hi Norman. Very good question. Most boilers have common faults, Ideal boilers have updated the sump now so hopefully, they will last longer. They always seem to crack in the same place, This is one of the reasons to have your boilers serviced every year. Thanks.

💞💞💞

Hi Alan, I am looking for a replacement combi, is the Ideal vogue a better bet than the Logic range in your opinion, I understand it has a stainless steel Heat exchanger and obviously will cost more. Although retired and never been in the Heating/plumbing industry I love watching your videos, Regards John

@AllenHart999

3 жыл бұрын

It’s all about personal choice. I really like the Vogue but it costs a lot more than the logic. You can also have a logic with a 10 year warranty. As long as the boiler is serviced and you have hot water then either would be ok. Just remember to have the boiler serviced to keep up with the warranty. My choice i would go for the Vogue over a logic though. Hope that helps. Thanks.

👏👏👏

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Ideal logic

@AllenHart999

3 жыл бұрын

Thank you so much.

what i will add is after cleaning the electrodes they might look clean but they might have oxidised. use your multi meter to check the continuity. they may look perfect but could be buggerd. hope this is a tip for you all.

@AllenHart999

3 жыл бұрын

Good tip!

👍👍

@AllenHart999

3 жыл бұрын

👍👍👍👍👍

would you remove heat ex when fitting new sump or loosen heat ex? it would be helpful to see what techniques are used in a combi as the system has got alot more room to push the back clips up? thanks

@AllenHart999

3 жыл бұрын

Very good question. Personally, I have never had to remove a heat exchanger. Also, loosen the screws. Thanks.

@PowerPlusHeatingTv

3 жыл бұрын

Will try again in future last one was a right falafel despite greasing everything and trying to get the back lugs in first. The far left one was not having none of it. Go on Allen put on a video to help me and I'm sure many more out with a tips and tricks type demo with this part change n the 'man cave'. Please thanks

@scobeno1911

3 жыл бұрын

Remove gas valve, remove bracket holding spark generator, loosen screws on hex a little , pry of the front 3 clips holding on the sump, grab the front of sump where inspection hatch goes, pull hex toward you and at same time pull down and push back on the sump. Hopefully you should dislodge the right and the middle rear sump clip. Get a large screwdriver and put between top of sump and bottom of hex on left hand side and lever down, this should snap of the las sump clip. Remove sump. To reinstall, some lube on sump seal, get the front 3 clips in then get a large shifter or something and hit bottom of sump till the rear clips engage. Top tip.... always get a mirror and check rear clips are fully home. You can tell usually when home as hex kind of springs back but always check with mirror

Do you change the burner seal on the logic at every strip service?

@AllenHart999

3 жыл бұрын

I have never changed one. Ideal told me to inspect and change if needed. Please check with ideal though.

👍👍👍👍👍👍👍👍

@AllenHart999

3 жыл бұрын

👍👍👍

Worcester bosch 30i combi boiler is it any good and could you do a video on it thanks

@AllenHart999

3 жыл бұрын

kzread.info/dash/bejne/h2SNyqafYN2-hKQ.html

@ranahasan186

3 жыл бұрын

Hi you sent a link for 28i not the 30i ?

Do you recommend a new gasket for the ideal boiler range after every strip down. Thanks

@AllenHart999

3 жыл бұрын

I normally just reuse if they look ok. Please refer to the manufactures instructions though as things change. Thanks.

@daviddavues1677

3 жыл бұрын

@@AllenHart999 thanks for on going advice. Worth the world👍

@AllenHart999

3 жыл бұрын

@@daviddavues1677 Thanks very much for your comment, please consider subscribing to support the channel 🙂

@daviddavues1677

3 жыл бұрын

@@AllenHart999 I am subscribed Allan. Videos are great

@AllenHart999

3 жыл бұрын

@@daviddavues1677 Unfortunately i cannot see who has subscribed and who hasn't, I can only see the people that have joined. Thanks so much.

Do you need to pay to go on the logic fault finding course ?

@AllenHart999

3 жыл бұрын

Sparky not really sure as they are all cancelled now

@sparky8320

3 жыл бұрын

@@AllenHart999 thanks mate check your what’s app sent couple of photos a job I got called too 👍

Are those water heaters allowed in bathrooms?

@AllenHart999

3 жыл бұрын

Yes, no electric to them anyway. Thanks

I get this boiler service every year it takes them 15 mins and i have never seen anyone do any of this , hard to find a good tradesman

@AllenHart999

3 жыл бұрын

Ask them why they are not doing it. 👍

@AllenHart999

3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

@154electrician

3 жыл бұрын

@@AllenHart999 should flushing it with water be included in a service.

@AllenHart999

3 жыл бұрын

@@154electrician Have a look in your installation instructions to be 100% sure but i believe so. Thanks.

@154electrician

3 жыл бұрын

@@AllenHart999 thanks , i find all your videos spot on

Are these boilers good?

@AllenHart999

3 жыл бұрын

They are ok if installed correctly. They also need to be serviced correctly.

Ideal Logic or something like that

@AllenHart999

3 жыл бұрын

👍👍

Amused that this video popped up, yesterday my uncle's Ideal Logic Combi 30 or whatever it is crapped out, seems the diverter valve has gotten stuck, and looking over the thing, screw fixing that myself, so much plastic!!! I have a Potterton Promax Combi HE 28, and it's for the most part metal parts (except the diverter motor, which has previously failed so has a new one), but that Ideal thing, goodness me, all that plastic inside of something that gets HOT, ugh, what an utter piece of shite... :\

@AllenHart999

3 жыл бұрын

The Ideal Logic is a really good boiler if installed correctly. It has had some modifications since it first came out. They now offer upto 12 year warranty on them. Thanks for the comment.

@colnemac

7 ай бұрын

Don't look under the bonnet of your car then. Inlet manifolds, thermostat housings, water outlets, radiator tanks etc, all made of the same stuff 😂

Most common thing on these boilers are heatex and sumps

@AllenHart999

3 жыл бұрын

👍👍👍

@lami150sx

3 жыл бұрын

Not really tend to only see main hex and sump go after 5 +years electrodes/flame sensor/turbine most common issues

Great video

@AllenHart999

3 жыл бұрын

Thank you.