How wonderful , not well , obviously saddened he couldn’t get back to work but uses his time to teach others , that’s a good guy. Here’s to you returning to health and work but most important of all health 🙏🏻

Another great video, thanks Allen. Good to see Mr Ideal back, thoroughly enjoy and learn from his videos. Hope he's feeling better soon.

Brilliant. As always there's so much packed into the short video. As you said before if you don't understand how it works you're going to struggle. Your tutorials do what so many others don't. They explain the process from start to finish. I always learn something new from watching your videos.

Thanks for taking the time to share your knowledge. For someone like me whos also had 4years off work due to ill health, getting back out there is hard and your videos are helping no end. Hope things improve for you mate

Thank you Alan for connecting with Mr Ideal to explain the "noisy" boiler. The diagrams and explanation were great and helped me understand what could be occuring with my boiler. Recently I have had building work in the same area as the boiler so it is likely that my boiler has sucked in the building dust so I need to get it serviced & cleaned ASAP. Ps: all the best to Mr Ideal as he recovers

Thanks Mr Ideal and Allen. Very useful video and this is what I needed to know for my Ideal Logic 24 boiler. Occasional vibrating noise with F2 fault code. Speedy recovery Mr Ideal.

Really well explained. Thanks Allen and Ideal engineer for sharing. Hope he is able to continue sharing his knowledge.

Hope your back on your feet soon Mr Ideal, excellent video. There are so many of these Ideals out there it’s worth getting them right, can see at least one day when I’m busy.

Great to see you back Mr Ideal. I always learn something from your vids , thankyou for taking the time to make them and share your in depth product knowledge . I hope that your health situation improves , take care. Best. J

@AllenHart999

3 жыл бұрын

Thank You.

Definatly a well explained video . Thanks for sharing. Hope a speedy recovery to Mr Ideal 🙏

Fantastic stuff. Thank you for this. This is the sort of information you cannot get anywhere else. Wish Mr Ideal all the best.

Many thanks Mr Ideal and Allen, great video appreciate the depth and work that has gone into the content. The science is pretty straight forward, but it shows if it can happen given the right circumstances it will.

Yet another great vlog Allen keep them coming don’t miss any of them 👍

Good to see you again Mr Ideal can't wait for more videos from you. Thank you.

Excellent video once again and wishing you a speedy recovery MOT

All the best shipmate!! Great informative video, that's taken on board for future Ideal snags. Every days is a school day!!

Thank you both for sharing the knowledge. I look after a lot of Ideal exclusives/ Atlantic’s in east London & this is a very common problem. They are very sensitive to debris buildup & also susceptible to the condense traps blocking up.

Mr Ideal is a legend, thanks for sharing the knowledge get well soon pal.

Great video once again! And thanks to the Ideal Engineer. All the best, and a speedy recovery.

@AllenHart999

3 жыл бұрын

Thank You.

Get well mr ideal man your videos are great hope you can still make a few more for us very informative even for people who have been doing it for years.top man and you Allen

Top man, hope you feel better soon and manage to keep sharing these nuggets with us.

Thanks for sharing Mr Ideal, hope you get better soon, thanks for sharing Allen 👍

Thank you Mr Ideal Engineer very informative video. Your vids are very helpful. We pray your health gets better. Thank you Allen.

Really helpful. I hope you make a full recovery. Your expertise and professionalism are much needed.

@AllenHart999

8 ай бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Great video, very informative. 👍Would be great to see more ideal engineer videos Wishing you a speedy recovery Mr Ideal

@AllenHart999

3 жыл бұрын

Did you learn much from the video? Thanks.

Excellent video, thank you for sharing. Mr. Ideal, I hope you get better soon.

Speedy recovery mr ideal, really appreciate your videos mate👍

mate again golden content, I work on ideals a lot and have had the reverberation on the fans on 30kw ESPs quite a bit, will be checking the injectors from now on, keep up the class education pal it's invaluable

Thank you Mr Ideal. Will look forward to more videos from you. Best wishes from us all. You take care pal. ❤

Excellent. Very well explained. Heard this noise a few times. Now I know how to sort.. Great drawings

I really enjoyed this video, and found it really informative, thank you for sharing your valuable knowledge, the drawings were really clear and really helped me to understand, I hope you are keeping well, have really benefited from all the logic videos.

Top man! Thank you really appreciate your knowledge being passed on to others.Hope your health improves daily.

Wish good health Mr Ideal, happy to see you back in this channel, very informative. ALAN please can you make a play list of Mr ideal man's video, I have been looking for his previous video very difficult to find from so many, just a request if possible.

Quality advice 👏👏👏 hope you get back to work soon mr ideal. Cheers Allen 👌

Great to see the Ideal chappie back. Top work 👍👍👍👍

Thanks Alan for connecting with Mr Ideal who explained, with some great visuals, what could be causing the vibrating sound in my Ideal 30 boiler. As I am in the middle of some building works near the boiler, it all makes perfect sense so I need to get it serviced & cleaned ASAP. Ps: All the best to Mr Ideal for a complete return to good health

Great to see Mr. Ideal back with his wealth of knowledge. Great video and a speedy recovery ❤️‍🩹.

@AllenHart999

3 жыл бұрын

Did you learn much from the video? Thanks.

@AllenHart999

3 жыл бұрын

@michaelorourke3997

3 жыл бұрын

Definitely. I’d be more confident going to a logic that has a L2 or F2fault. At least I would have a starting position. I hope Mr Ideal gets better soon.

Excellent video.I hopefully look forward to more mr ideal videos.you are a natural

@AllenHart999

3 жыл бұрын

I agree. Thanks.

Best wishes mr ideal, brilliant video 👏👏👏

Another great video and Mr ideal thanks for all the help your giving as I am sure this helps many, well done and get better as fast as possible

Great vid Alan and Mr Ideal, I hope he get a speedy record back to health and on the tools again👍🏻

@AllenHart999

3 жыл бұрын

Thank You.

Wish you well mate. Always excellent detailed knowledge.

Very knowledgable guy thank you very much hope you health improves 👍

Cheers. Very helpful video,..hope you're well enough to return to work soon!🙏

Hope you are on the mend pal, thanks for this information it worked for me 👍

Thanks for the great videos. Get well soon👍

Great information, thank you for taking the time to share

Have had a few of these and this describes the fault and the remedy perfectly. Proper servicing and not poke n goes is key... As always prevention better than cure!

Brilliant video. Hope u get well soon mate 🤜🏼🤛🏼

Great video and drawings well explained keep em coming 👏

@AllenHart999

3 жыл бұрын

Thank You.

Mr Ideal …. Thanks for another informative video… get yourself fit and strong fella 👍

@AllenHart999

8 ай бұрын

Thanks 👍

Mr ideal hope you get better mate, as its blokes like you we need in the industry. Im going to be honest though and i find it the gas valve to be a common problem aswell, especially on the older logics,as when the methane gas hits copper, it reacts and forms copper sulphate or shale as people call it. Once it goes into the valve, it gets stuck in diaphragm causing the diaphragm to vibrate between high and low. Thats why on newer ideal models especially the logics when put into service mode it starts on SH now rather than SL to try and force the shale out of gas valve. But you are right, the callouts i get on ideals for humming noises is the venturi and outside of injectors have some dirt on them.

@AllenHart999

3 жыл бұрын

Thank You.

@plumbertime

3 жыл бұрын

Nice always wondered where the shale comes from

Nicely explained mr ideal.hope you get well soon, had a couple of these boilers with the spot welds broken on the burner. Makes one hell of a rattling noise. due to ignition failing and explosive ignition. I’m not sure if you have already covered that fault but it’s an Expensive repair .

Great video. Hope you get well soon

Brilliant video again , thanks to me ideal for the vids hopefully there’s more

Nice one Mr Ideal hope you get better soon and get back to work 👍

@AllenHart999

3 жыл бұрын

👍👍👍👍👍

Get well soon mate , your a legend......👍 cheers Allen.....👍

Excellent stuff. Brilliantly helpful.

Thank you very much this information was very useful helpful it me in completing a emergency call out task

@AllenHart999

9 ай бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Great video. I had an F2 yesterday. Same vibration noises. Problem was blocked condensate pipework.

Great tip there Mr ideal and get well soon mate 👍

@AllenHart999

3 жыл бұрын

Glad you enjoyed it

Thank you so much for that hope you get well very soon 👍

Great video. Really very helpful information

Great video. Thanks mr ideal. Great name that is by the way 🤣 all the best hope your ok 👍

Great Video Only had one the other day whistling noise.dirty injecter & venturi.

Fantastic video thank you

thanks Mr ideal and allan you r legend thanks

Great video. Thank you

To Mr Ideal, excellent video and good explanation of the problem. Hope matters improve for you soon.😀👍

@normanboyes4983

3 жыл бұрын

@@AllenHart999 at least one of those emojis look a bit rude.😳

@AllenHart999

3 жыл бұрын

@@normanboyes4983 Which one lol. They should be plumbing tools.

@normanboyes4983

3 жыл бұрын

Well the second one looks as though someone is having a tug.🤣

Keep doing the vids mate. It’s hard to learn technical knowledge without working for a boiler maker. Technical will tell you what to test ect but not give you a technical video like this 👍👍👍

@AllenHart999

3 жыл бұрын

Thanks, will do!

Great video so glad he’s back there loads of logics on my patch. Hope he gets better soon and returns to work and gets back to full health. Keep the videos coming

@AllenHart999

3 жыл бұрын

Thank You.

Drawings are good, very clear.

Fantastic watching this ! ❤️👍

Quality advice mate, thanks

@AllenHart999

3 жыл бұрын

Thank You.

Thanks for this, very understandable......

I had the exact same problem at the end of last year. The boiler would making farting noises when it modulated down sometimes locking out. And yes, the boiler was on a new build site still being constructed. There was a slimy build up around the injector. I've also had a spider egg sack stuck in the venturi causing the same problem.

Excellent video

@AllenHart999

3 жыл бұрын

Thank You.

Please more. Hope he gets better.

Get well soon Mr Ideal. How do you clean the fans impellors? i find modern condensing boiler fans are more enclosed than old atsmospheric burners so not as easy to clean the impellor blades. Thanks

Very informative video...

Great video, but in my 20 years experience Ideal Boilers are only ideal for one thing; the bin! 🤣

What 40 size boiler would you reccomend - I'll be replacing a baxi Platinum 33 which is over 13 years old now - THANKS Alan

Hi Allen have you got a video how to install a room thermostat or nest thermostat for ideal logic code combi?thanks in advance

Hi Alan, hope you can answer a couple of questions please - whats difference between the Baxi Platinum 40 and Baxi EcoBlue Advance 40

Thank you sir. Very well explained and thank you Alan for taking the time to share the knowledge Regards from ireland 🇮🇪

Hope your better soon bud.

Very good video

I have an ideal logic heat 15 boiler which continuously from new over 7 years ago faulted L1 L2, and was very noisy every winter. This would happen when trying to maintain a steady heat of 21 deg in my home. I had it serviced every year and it passed all its safety checks. But the fault continued even after a new fan and many other parts were replaced unnecessarily. We were also was getting a very strong smell of rotten eggs which was making us very poorly, I didn’t know where the smell was coming from so I cleaned the sink and the drains, then replaced my washing machine dishwasher etc and yet the smell still continued. I explained all this to my gas engineer and the next day he came out to see me, contacted ideal for advice and it turned out the gas pressure going into the boiler from the meter was too high. The gas pressure to the boiler was 25mb and it had to be lowered to 21mb at the regulator, and we haven’t had any more problems, no faults and it’s so quiet now and the smell has also gone. When I complained to the gas company who have been looking after my boiler they denied everything.

I have a ideal logic 35 had the gas valve replaced it didn't show a fault code wise but said low gas check other gas appliance it now shows no fault but is still the same making g a horrendous vibration and noise it so loud ...where do I go from here ...

Why do all ideal logics pin hole in the black plastic condense sumps?....

Wel explained 👍

Also a MASSIVE thing to note here is the Ideal Logic HEAT models 'ALL HAVE A 24 KW INJECTOR' clean them inside and out every time 👍🏻👍🏻👍🏻👍🏻

Appreciate this is an old video but does anyone have any tips regarding these logic boilers not having any of these usual service related noises noises but then you clean you the Venturi and injector and it becomes noisy? Thanks

How about a brand new ideal boiler supposed to be 46 kn but is 58 kb and waking us up. Is this one normal. Ideal thinks it is !

Good video 👍🏻

We didn't have any services at all, the boiler is whistling, with a strange noise (creaking) before to show F2 error on the front panel( the boiler stop then and fail to ignite) The plumber sent by the landlord has cleaned the injector but the issue remains the same. Because of no services at all after 2 years he said that the guarantee might not work but one of the valve could be faulty and needs to be replaced. I didn't know all this details but if you have a careless landlord and no maintenance for your boiler some problems may show up early or late.

Top man .. thank you

@AllenHart999

8 ай бұрын

Glad it helped

Thanks guys

Awesome - thanks! 🤗

Brilliant well explained

@markasquith8371

2 жыл бұрын

Hope your health has improved 🙏