If you found this video please consider adding a donation to our chosen charity. Thank You www.justgiving.com/fundraising/cchleeds

@sudhiradhikari19

2 жыл бұрын

Hi Allen, l will definitely donate to this charity by joining on the link you have provided as soon as l get job, I am also related to it like you, my nephew who was jus 6 years old past away in the great Orman hospital.

@AllenHart999

2 жыл бұрын

@@sudhiradhikari19 Thank you very much.

@sudhiradhikari19

2 жыл бұрын

Hi Allen, thanks for making videos for people like me, as I said before once I get job I will start donating to the charity, now I got job in Reading Borough Council, hope it goes alright, I can also confirm that I have set up direct debit to Candle Lighters. Very happy to be part of it.

Hello Allen, just want to say a big thank you for the time you take out to do these videos mate, much appreciated.

@AllenHart999

2 жыл бұрын

Thank you for watching, I wouldn’t do the videos without all the amazing feedback. Thanks.

Brillant video Allen. Thank you very very much for making this so easy and simple to understand, you are a gentleman.

Very detailed and informative. Thanks!

Allen thank you very much for your help. Greeting from ALBANIAN 🇦🇱 God bless you.

Great video. Keep them coming Allen

Excellent video this Allen, look forward to the vertical flue install next 🙏👍 thanks as always mate

@AllenHart999

2 жыл бұрын

Thank You

Easy enough to use the black or white on the measured point and use it as a template to draw around. Great little tutorial Al. Looking forward to seeing how you tackle a vertical with or without bends 🙏👍.

@AllenHart999

2 жыл бұрын

Thank You

Absolutely brilliant. Video really enjoy. Keep up the fantastic work. So appreciated. 😊👍

@AllenHart999

2 жыл бұрын

Hi Manj. Thank you for watching and also taking your time to add a comment.

Allen your "spot on" with the sand and cement 👍

@AllenHart999

2 жыл бұрын

Thank You

these videos are great for home owners who maybe getting a new boiler and can be reassured as to how a boiler should be installed and how it should look when finished

@AllenHart999

2 жыл бұрын

Very good point. Thanks.

@tomrobinson4935

2 жыл бұрын

I have to agree on this. We went to fix a flue that was far too long on a rented property today. No rubber and they had spray painted the white to hide the fact that they couldn't be bothered to cut the flue down. When we told the landlord, she wouldn't believe us as it had been passed for years. It wasn't until we showed her the manufacture's instructions that she realised it was wrong. She thought we were fishing for work, like we need to do that at any time of the year but specifically this time of year. Nothing worse than putting other peoples work right.

@AllenHart999

2 жыл бұрын

@@tomrobinson4935 Hopefully videos like this will help raise the standards. Thanks.

I love the vogue! Brilliant boiler, great video sir!

@AllenHart999

2 жыл бұрын

Thank You

Another great video Allen - I’ll definitely use this method for my next install. Thanks 👍

@AllenHart999

2 жыл бұрын

Many thanks for the comment.

@nickcannon5592

2 жыл бұрын

Always cement up and put flue screws. I do it your way, it's the only to get it bang on

Yr a legend mate cheers for the video have a great day

Excellent video allen

I used to have a Stanley toolbox with a slot in the top which was just the job for cutting down flues, stopped it slipping. Hacksaw with 32tpi blade does a neat cut, and a half round file to take off the rough edge does a good job. Always seal up with mortar inside and out, then all regs are covered👍🏻

@AllenHart999

2 жыл бұрын

Thank You

Hi Allen thanks for your informative video well done 👍🏼

@AllenHart999

2 жыл бұрын

Thank You

Well explained Allen......thanks buddy👍👍👍

Colin Colin glad you finally got the measurement accurately

@AllenHart999

2 жыл бұрын

🙃🙃🙃🙃😂 I got there in the end lol. Thanks.

@colin5064

2 жыл бұрын

@@AllenHart999 No problem Allen we all have senior moments now and then :)

Thanks Alan, great video as always. Please let me add a couple of more details regarding Ideal Flues(other manufactures’ Flues will differ). Ideal over he last few years changed their coaxial horizontal flues slightly; there’s a ridge on the Air Duct & a Weep Hole. Both of which you can clearly see in the video. This amendment was to stop driving rain from entering the boiler via the air duct, any rain is stopped by the ridge & weeps back out again via the hole. Lastly, I’d always chamfer the Black POC flue after cutting, this will ease Assembly & lessen damage to the Turret Bend seal. HTH Kind Regards Dick Puller👍👍

@AllenHart999

2 жыл бұрын

Thank you for the feedback.

Great video Allen 👍

@AllenHart999

2 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Nice one Allen.....sand & cement both sides for me every time..... 👍

@AllenHart999

2 жыл бұрын

The best way in my opinion. Thank You.

Allen, what a video, I was waiting on this for long time, thank you so much very very helpful and you made it so simple to understand, may I request you to explain little bit about the flue extension on your future video, also when you install next boiler can you please explain about hanging brackets on the different types of wall and also the types of screw you use for different walls.

@AllenHart999

2 жыл бұрын

I will try and do that when I do the Vertical flue video. Thanks.

brilliant video allan / u never stop learning thanks for thid video

@AllenHart999

8 ай бұрын

Glad you enjoyed it

@AllenHart999

8 ай бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

Great information 👍

@AllenHart999

2 жыл бұрын

Thank You.

Great videos, i love watching you. I wish to be there, so i can get some experience.

Nicely explained

@AllenHart999

2 жыл бұрын

Thank You

great video,, very interesting. Think you need to work on your measurements . I think you was meant to say 350mm not 305mm when measuring the flue length . keep up the great work.

@AllenHart999

2 жыл бұрын

Thank you for the feedback.

Class Allen !!!!

@AllenHart999

2 жыл бұрын

Thanks.

A vertical flue with weathering slate would be great in the future 👍👍

@AllenHart999

2 жыл бұрын

I will try and do one in the next week or so. Thanks.

Some good tips there mate

@AllenHart999

2 жыл бұрын

Thank You

Looks an Ideal way to do it

@AllenHart999

2 жыл бұрын

Thank You

Hi Allen Would love to see a video of how to install a flue sideways as the template only works for a standard rear exit.

Wow Allan this is the best video I have seen about flue, I prefer hacksaw, so you have total control of cutting the flue, safe, neat and then file it. Differently I use mortar inside and out, so it is secure and sealed properly and definitely on ideal as it does not have screws and clamp as you said anyone can pull the flue out. Excellent video Thank you Allan. My advice is never rush in your job, be calm and read MI properly. I just hate flues sticking out the wall, and whoever does this, it's under cutting other good professionals. It's shamble.

@AllenHart999

2 жыл бұрын

I just need to learn how to read a tape lol.. Thank you buddy.

External wall to elbow + 60mm for Ideal. Cut with a hacksaw. Gobbo inside and outside. Stretch the external collar. So easy even our apprentice can do it.

@AllenHart999

2 жыл бұрын

Thanks.

On Ideals put flue elbow on measure to face off brick outside to edge elbow add 50mm perfect, I used to do it your way

I have never fitted a Vogue so not familiar with the book of words: However I would definitely sand & cement hole and probably fix outer flue to the elbow with a short stainless self tapper. I use a grinder on the outer tube too. :-)

3:12 i usually put the flue level or 1-2 degrees down (especially at viessman boilers) during service interventions, most defects in the electronic board, fan and defective gas valves are caused by rainwater entering the outer tube from the exhaust pipe in the boiler. And the guys at viessman were nice enough to make sure that any drop of water that gets from the flue to the combustion chamber will reach either the electronic fan plate or the gas valves ... now they have chosen a location more decent but still could not bear to put a collar for water capture and drainage as other manufacturers do: P

@AllenHart999

2 жыл бұрын

I have always been told to do them level but it’s worth checking the installation instructions. Thanks.

@ 4:18 I usually put the flue pipe in a 110 mm drain pipe that i fix in the wall with gypsum (hardens very quickly). Lately I leave the 110 mm 1-1.5 cm pipe protruding inside and insert a short screw through it to the outer tube from the flue pipe of the boiler so that it cannot be accidentally removed from the elbow part of the boiler. I prefer to put the chimney in a 110 mm pipe so that in the future, the next time the boiler is replaced, the replacement of the flue will be much easier.

@AllenHart999

2 жыл бұрын

Thank you

As an exideal field engineer, we would want to see the flue sealed with sand and cement, as you said we rely on it to hold the flue in place. Also with the inner fall of the exhaust, it is built in, but if you are adding extensions and extending the flue, depending on the length, you may need to add a fall into the flue.

@AllenHart999

2 жыл бұрын

I phoned ideal today and they said it didn’t need sand and cement. Personally I would always seal it up. Thanks.

@kevincranfield5235

2 жыл бұрын

I believe you, but our training department and managers where all under the notion they had to be sealed. If they were not sealed at least either on the outside or inside, we would leave a warning notice and potentially turn off the boiler, so I would advise nobody to take that chance.

@AllenHart999

2 жыл бұрын

@@kevincranfield5235 The guy said the newer flue has two seals and you can just use them, I take it the old flue needed sand and cement, In my opinion they should all be sealed with sand and cement. Thanks.

@proteus1

2 жыл бұрын

I was told by gas Safe that all flues should be sealed inside and out with cement.

Definitely seal up with sand/cement!

@AllenHart999

2 жыл бұрын

Thank You

I bought a Flue Shoe. Personally, for me, it was probably an unnecessary expense. But if you were fitting a lot of flues, I’d say it would be a good tool to have. I bought the reamer too, which I’m not so keen about. Thanks for the video.

@AllenHart999

2 жыл бұрын

I used to do about 5 flues a week. Personally I wouldn’t buy a flue shoe as I feel it will just be in the way in the van or get damaged, I do not see the point in buying loads of products we don,t need. Thanks.

@AllenHart999

2 жыл бұрын

Do you use sand and cement. Thanks.

@Brijoolz

2 жыл бұрын

@@AllenHart999 fair point. I’ve got to say, for the job it’s designed to do, it does very well. That said, it’s a shame that it can’t take small commercial size flue (it could with another adapter). Xmas present from the Mrs for you ??

@Brijoolz

2 жыл бұрын

@@AllenHart999 tend to use fire rated silicone inside and sand cement outside. Most our houses are timber frame up here, rather than solid walls.

HI Allen great video as usual, there is a Gas Safe TB 152 about securing and sealing horizontal chimneys/flues.

@AllenHart999

2 жыл бұрын

Hi Kev. I wasn’t aware of TB 152. I have updated the title. Thank you very much.

from the video and gassafe TB 152 seems sand / cement sealing on both wall leafs is the most reccomended way too 1 secure flue orientation & position and restrict flue removal (with manuractuers clamps & screws if any). 2 help the manufactuers seals/trims exclude gas & rain from the wall cavity interior PS with new homes beiing air tight tested they cant tolerate many air leaks or draughts in or out. Reliable seals on the inner wall needed to stop air movement from cavities.. Fun and games if your doing replacments and bricking outer walls but not doing much wih the inner leaf & sealing.

Would you ever think of using expanding foam around the brickwork?

Great video My flue goes straight out the wall. But having a conservatory so don't want the flue going out there. Can I cut the ceiling and go up a bit and run the flue 6 feet across so it can go out the side of the house. Would that be okay Thanks

Great job allen I do sand cement external only I always put screws into the flue .like you said new builds flue too long .

@AllenHart999

2 жыл бұрын

What do ideal say about putting a screw in the flue? Thanks.

@jameshawkins5280

2 жыл бұрын

Should have said apart from ideal plastic elbow ,always stick to manufacturers instructions most don't even mention sand and cement years ago you had to put 3 screws in or gas safety would rip into you on your inspection.

❤❤❤

@AllenHart999

2 жыл бұрын

Thank You.

Hi Allen I have an Ideal combination boiler in my wardrobe in bedroom with horizontal flue pipe running along ceiling in bedroom. I’ve just had it boxed in after having a service and the guys used chipboard is this safe. I’m getting headaches I didn’t get before when it was exposed. Also have carbon monoxide detector.

Can you use expanding foam for The gap Instead of sand Cement

Hi Allen can you please make a video of installing a flue to the side of the boiler

👍👍👍👍👍

How long should you leave the cement to harden before putting the outside seal on?

hi Allen. how do i clean the flue - would i be able to disconnected the part above the boiler, remove the elbow and clean both pipes without having to re-cement and re-seal the whole thing?

Intergas horizontal flues what is your opinion on these?? With the front wall plate you get for the flue I find difficult to seal on the inside due to the square plate you get.

How Alan, did you do the vertical flue demo

How do you stop the sound of the wind coming back into the house? That is the main problem we are having since we got a new boiler. Noise of the wind keeps us awake all night.

Just measure from lip of outside wall too face of 90 bend and add 30mm for slip, perfect everytime

roy training top man worked for baxi he did some of my training top man

@AllenHart999

2 жыл бұрын

Thank You

Do it exactly the same as you only i squirt fire proof expanding foam in leaving about 10mm. when it’s set use fire cement to seal inside and out, no mixing up.

@AllenHart999

2 жыл бұрын

Hi Timmy. Do ideal say that expanding foam is ok? I know gas safe said we couldn’t use foam a few years back as it could crush the flue? Thanks.

@cynt1111

2 жыл бұрын

@@AllenHart999 I always drill a 5” core so there is room for expansion, it is used purely as a base for the fire cement.

@AllenHart999

2 жыл бұрын

@@cynt1111 I would personally say that’s a really good idea but if I was using foam I would check that the manufacturer-approved it first. Thank you very much

Sir I was also waiting for this video. But please little correction in measurement. 35 cm equals to 350 mm not 305 mm. Thanks

@AllenHart999

2 жыл бұрын

Thank You.

My boiler flue wasn’t put on so the flue was angled towards boiler. Can an engineer do this from outside?

Could you do a video on vertical flues?

@AllenHart999

2 жыл бұрын

Yes absolutely. Should be in the next few days. Thanks.

350mm Allen mate 😂 305 would be be 30.5 cm not 35 quality as usual though 👍

@AllenHart999

2 жыл бұрын

Thank you so much for the correction. I do correct myself later on in the video. Thanks.

Some engineers use washing up liquid around the flue instead of silicone grease, is that ok or will it cause problems

@AllenHart999

2 жыл бұрын

That's a very good question. I would expect that is a definite no no but I cannot be sure. Thanks.

@MrMarco3

2 жыл бұрын

Im pretty sure some manafacturers say that washing up liquid is actually a good idea and tottally fine. Not 100 per cent sure but the i remember the guy who trained me up telling me a manafacturer and told him washing up liquid is good

@AllenHart999

2 жыл бұрын

@@MrMarco3 Washing up liquid is classed as corrosive when testing for gas leaks, Not sure if it would be the same on a boiler seal. I know Baxi say to use silicone grease. Thanks.

@bpercival2413

2 жыл бұрын

Washing up liquid every time. You're not supposed to use mineral lubricants.

@sharonbhara6182

2 жыл бұрын

Could just use vassaline

That’s the same way l do the flue, can’t go wrong. Sand and cement always. You have to AR it if only seal one side and ID it if not seal both side. Why manufacturers don’t keep to one standard . Would be nice if I get an invite over when you’re installing the ASHP.

@AllenHart999

2 жыл бұрын

Thank you for the comment. Not sure I agree with your classification though but I will save that for another video. Thanks.

Foam is fine

@AllenHart999

2 жыл бұрын

Do ideal say you can use foam? Thanks

@EdthePlumber

2 жыл бұрын

Have you tired to take out a flue when it’s been sealed with foam? It’s a nightmare, just use sand and cement

@deannewman1459

2 жыл бұрын

😬

What do you use to fill around flue?

@AllenHart999

2 жыл бұрын

I use sand and cement. Thanks.

We had an Ideal boiler installed with too much flue showing and it's position only 19cm from an open window. Ideal withdrew the warranty. The Gas Safe Register are coming to investigate along with the installation company.

@AllenHart999

2 жыл бұрын

Please let us know how you get on. Thanks.

@frankcarrodus7543

2 жыл бұрын

@@AllenHart999 Morning Allen the Gas Safe Register came last Thursday along with installers. They issued a safety notice against company who have 17 days to comply. Company says it will firstly write to Ideal boilers because they say Ideal have previously told them that it is ok for flue to be in the position it is in! So, awaiting for updates.

Always seal a flue

@AllenHart999

2 жыл бұрын

Thank You

Allan what size do you core

@AllenHart999

2 жыл бұрын

125mm i believe it was. Thanks.

Hi, I always use sand and cement, you never know what could happen, if it gets knocked or pulled out in the future, you might end up in court if it kills someone.

@AllenHart999

2 жыл бұрын

The best way in my opinion. Thank You.

An easier way is put the flue in like you did from the start and measure from the wall to the centre of the black mark under the flue (near the end of terminal) measure the distance and then take that measurement to cut of the end thats in the elbow

@AllenHart999

2 жыл бұрын

That’s sort of what i did really. Thank you so much for your input.

350mm mate 😀

@AllenHart999

2 жыл бұрын

I am dumb buddy, Thank you for pointing it out.

35 🤫

305 ? 350 mm he means

350 MM

@AllenHart999

2 жыл бұрын

Thank You.

350mm or 35cm not 305 surely

@AllenHart999

2 жыл бұрын

😂😂😂

its 350mm or 35 cm not 305mm ?

@ernie7918

2 жыл бұрын

great vid exactly how we do it

@AllenHart999

2 жыл бұрын

Thank you.

I’ve seen this technique (using the wall to make the length) go horribly wrong. He measured the wrong side and cut it short! I always measure outside brick to flue elbow. Then cut it down

@AllenHart999

2 жыл бұрын

Thank you for the feedback.

when you say "exciting" allen are you going dress up as santa and give us all free prezys.... (excellent video as usual, Ihope my joke doesn't offend you)

@AllenHart999

2 жыл бұрын

I have dressed up before on the charity installs, I might see if I can get some prizes from somewhere lol. Thanks.

@theunknown1426

2 жыл бұрын

@@AllenHart999 I was joking about the prezys mate, no need for you to go to any trouble cos of a joke, you sharing your knowledge is prize enough for me, thank you again for your hard work

@AllenHart999

2 жыл бұрын

@@theunknown1426 Thanks.

5 ml off white aloud

@AllenHart999

2 жыл бұрын

Not on a Ideal Logic, Thanks.

@apprenticelogic6642

2 жыл бұрын

@@AllenHart999 i can’t see from my house 😂

At 1. 58 that is not for real ! 😀