IC Station ESP8266 based 5V Dual Relay WiFi Module
Автокөліктер мен көлік құралдары
In this video we take a look at a dual relay module controlled via WiFi using an ESP8266 module. In the video I show you how to configure the module and then control it in a few simple steps.
You can get your own module from IC Station here: www.icstation.com/esp8266-wifi...
Visit the RC Tractor Guy website, blog, forum and store at:
rctractorguy.com/
Become a Patron to support the RC Tractor Guy:
/ rctractorguy
Like the RC Tractors and Construction Vehicles facebook page:
/ rctractorsandconstruct...
Пікірлер: 56
Hi, could you please explain how to set ssid in the app? in my case field ssid is locked and it is not possible to put anythin.
I got this device but when connecting wifi and after that pressing s1 button blue led is on but wifi is turn off automatically.. Please help
*Awesome Video brother* *Ontime Edu* 🌟 🤗
hi, good video, i have a question; in my phone when i touch confirm it apperes "esptouch fail" did you know why is happening?
can this thing added to ewelink?
Are there apps for the Iphone to do similar?
Thanks for your published video project, appreciated. :D
hey Can you send me the original software for esp-01 for this esp8266 x2 relay chip?
Is this programmable to use with Alexa?
Hey, thanks for the video, I realise it's a few years old now, but did you get the App from the play store, as if you did it seems to have been removed, I can see an APK for it, but my phone isn't rooted as I use it for my banking etc.
Where is the sketch for esp01? Is cancelled my esp. Thank.
Buongiorno. Non so la lingua inglese. Desidero sapere se è possibile comandare il modulo tramite app Ewilink o simile. grazie.
You should make a similar video for the 1 Relay version of this board :)
@blackrider83
5 жыл бұрын
Try this step by step guide: www.hackster.io/makerrelay/esp8266-wifi-5v-1-channel-relay-delay-module-iot-smart-home-e8a437
Hello, my question is, how to connect wifi module to wifi. I got USB adapter for module, but a can't find software or somethink, what can confgure it. Thx for answer
@ikadekagusaryamahendra8236
4 жыл бұрын
try "blynk" app
My WiFi relay module can't change working mode to 2th. I press S1 button, but blue LED don't turned ON. What I do wrong?
Nice, does it come with the firmware and everything already installed?
Where did you find the input message?and ip address?
Hi, I got this relay but when I click the left button nothing happens. The green light flashes slowly just like in your case but the blue doesn't turn on. Any ideas?
@tumimbanghymarvannd.8603
4 жыл бұрын
Same problem here bro
@FloAir
4 жыл бұрын
Turn power off and press s1 button while powering back on to switch modes. Video method doesnt work in mode where red led is constantly on on the main board.
Hi! I can't acess to the relay from the mobile with 4g internet. Only connect to the wifi router. Can you help me? Thanks.
@edmonddobrova2866
5 жыл бұрын
you have to setup port forwarding on your router in order to access it from the 4G internet
But how can you get it to remember the Wifi settings? Every time I reboot/powercycle the relay board, it loses the Wifi config, and I have to set everything up again.. which usually takes 4-5 attempts for me. This makes it more or less unusable for any real world application.
@itsaustraliadayeveryday7234
4 жыл бұрын
Haha i guess hes not going to answer you. but good point
@Middle-Eastt
2 жыл бұрын
Make sure you keep the relay working to avoid memory lost.
@sergiug5342
Жыл бұрын
hello, did you find the solution?
My Smart config doesn't allow typing SSID.????
can the device be accessed remotely instead of from your home network?
@Dabarda
5 жыл бұрын
In theory, anything that can be accessed via a LAN (your home network) should also be accessible from the internet. This is just networking at this point.
@integrated12345
5 жыл бұрын
@@Dabarda I finally received the same board in this video, and it works well, I have a remote tennis ball launcher and a misting system I built for my Jack Russell (very spoilt puppy!) Check out my KZread channel, I have heaps of videos showing it all work.
Plz help me Module is not connecting
In my wifi it's not connectimg What is the mobile app
Can you programme a time to stay on? Say 3 seconds?
@crucea
4 жыл бұрын
yes, but not with this software, search blynk
Code?
nice done job sir if and how we connect 8 rely board plz make it with many thanks
Bruh what password do I need to enter? And how did you get the ssid on the app? Mine is always showing unknown ssid, never used this wifi relay even once after a year now
No details of installation, procedure etc. It is a just show!!!
Have you created this video just for subscriptions?
while other people make iot device. this guy use it for bomb's detonator
@yoramstein
4 жыл бұрын
he is Irish dont forget.
@Middle-Eastt
2 жыл бұрын
His grade 2 teacher most have been a retired Soviet soldier or a body guard to Hitler 😃😃😃
where is the code?
This app is long-gone from the play store and even if you manage to download it from somewhere else, it ain't gonna work because, in newer Android versions, it can't get the SSID. I hope the app developers gave a provision to manually input the SSID.
you didn't explain anything .. just explain how to connect to the phone, it's complicated what you're saying
Not complete video . half tutorial
@TheBarua
6 жыл бұрын
Password kis ka dalna hai????
@TheBarua
6 жыл бұрын
Kya mobile ka wifi on karna hai . hotspot ???
@TheBarua
6 жыл бұрын
Puri tarah samjhao . video adhuri hai short cut mat maro
@TheBarua
6 жыл бұрын
Is video Ko hindi me banao dear friend
Aucune information valable si ce n'est une video ... nul