Worked like a charm, just that i had to change the baud rate to 9600 for the serial monitor

Excelente videotutorial, depsues de medio año logre hacer funcionar el dispositivo, gras por compartir sus conocimientos, saludos.

Super Thank for easy explanation

Excellent videotutorial, thanks

Worked perfect, many thanks.

Nice video, thanks :)

FUNCIONA!! . El mejor sobre el ESP8266 01S.

@YaserAliHusen

Жыл бұрын

gracias, no olvides ver otros videos y suscribirte a mi canal

Thank you and thanks for the link to the script and HTML - most useful. :)

Super Thanks !!!

Thank you, It works really well.

@YaserAliHusen

Жыл бұрын

You're welcome!

so use-full. now days 2023 and esp01 still alive! willl do something!!!

@YaserAliHusen

Жыл бұрын

Thank you

Super Thanks

In the required materials should the Arduino IDE be listed? I have downloaded Arduino IDE for linux. ESP_01 does not show up as a Board. When the USB programmer is pluged in the Serial port shows up but ESP_01 is not one of the board types on that port. Is this video suitable for newbies to the IDE?

@YaserAliHusen

9 ай бұрын

You must Install the Boards in Arduino IDE In Preference -> Additional Boards Manager URLs, add: arduino.esp8266.com/stable/package_esp8266com_index.json Or you can googling it Thank you

a quien no pueda descargar el archivo, use otro explorador. excelente video

Very good, I have tried it and it is feasible, but may I ask if the IP address will change after a period of time?

@YaserAliHusen

Жыл бұрын

I have not ever try for long period If connected, maybe the ip will not change

Thanks Yaser, much appreciated, could I ask if you could suggest how to change the code from a switch to a momentary button , thanks

@YaserAliHusen

6 ай бұрын

Sorry I have not ever try it. Do you mean, we must hold the button to turn on the relay, when we release, relay will be turned off, right?

Excellent sketch but when I connect the power the relay energizes when it should remain off but instead it energizes without command. If I have to turn on a light bulb, an opposite action is necessary: the relay must be turned off. not energized when connecting the ESP-01 power supply.

@YaserAliHusen

7 ай бұрын

You use relay which it will ON when receive Low signal, right? So, in code, in setup, turn off the relay first by write HIGH the relay

never worked for me

where to find ESP8266 wifi file ?

Hi, thanks for nice video. Can I connect to esp01 which is on home wifi from my smartphone which is on other network maybe in some other region?

@YaserAliHusen

8 ай бұрын

if use web server, we cant connect. But we can use MQTT communication for long distance over the world connection

Thanks for the video, very interesting, but can I control multiple separate relays, one in each room to turn on off?

@YaserAliHusen

9 ай бұрын

This video explain control a ESP device via its webserver page, so you can add more relays in 1 device, you can use ESP32 or ESP8266 with more GPIO. If you mean control more devices with 1 page, you can use node-red dashboard, it can connect more device an out control on a dashboard page

@funlife8744

9 ай бұрын

You can use the ESP8266 Relay x 4 Module to control 4 devices.

@MrBobWareham

8 ай бұрын

Thanks for your reply, but I would like to use 5 single relays one in each room to turn on 5 lights but from one web page @@YaserAliHusen

After completed uploading and error . Error : fail to connect to ESP8266 : timeout waiting for packet header

@YaserAliHusen

10 ай бұрын

Disconnect the cable, Follow the steps

where to buy the part where u connect the power to power on the relay ?

@YaserAliHusen

8 ай бұрын

You can find Micro USB to Dip adapter, there are similar with this part

It connect with wifi after uploading the program. But when I connect with relay module it cannot connect with wifi.. please reply

@YaserAliHusen

Жыл бұрын

Please follow the steps, others could connect it well

Can you please re upload the code.it is not available in drive Only html code has

@YaserAliHusen

Жыл бұрын

There is INO file: TEST_SERVER_ESP01_Rev1.ino You can put it into foldee with same name Did you download zip file?

If i am doing many pieces like this will it have seperate ip address

@YaserAliHusen

9 ай бұрын

Yes, 1 ESP has unique IP address

When suddenly the electric power supply goes out and at that time the status of the relay module is ON. Then the electric power supply turns ON again, does the status of the relay module remain ON?

@YaserAliHusen

Жыл бұрын

I set, initial status is OFF, so when power turn on, relay become OFF

@amateamchannel3687

Жыл бұрын

@@YaserAliHusen is it possible to set the initial status to the last status? or must be added battery back up memory?

@YaserAliHusen

Жыл бұрын

@@amateamchannel3687, I think you cant. If you want, you must store the status in something, in additional relay, pararel with main relay and connect output relay as input. Esp will check the input as relay status in initial start up. And you must use another esp device like esp8266

@amateamchannel3687

Жыл бұрын

@@YaserAliHusen Terima kasih for the information

@thejocelyn5994

8 ай бұрын

Yasser sorry but initial power is at on, so when power turns on relay is on. How to reverse that in the code?? thanks @@YaserAliHusen

That was esp01s

Where i get app?

@YaserAliHusen

Жыл бұрын

You just download the ino file

thans. but the link not working😢

@YaserAliHusen

2 ай бұрын

You can follow the steps in video, Most of comments said they succesful tried this tutorial

cannot download code?

@YaserAliHusen

10 ай бұрын

I provide the link at video description, did you download it?

@GordonWilson67

10 ай бұрын

Yes, thank you for the fast reply, at first I was trying to click on the links to download them and that did not work, but then I saw a download button in the upper right corner and that worked, thank you. 🙂@@YaserAliHusen

That is why I cannot upload code

@YaserAliHusen

10 ай бұрын

Please follow the steps, especially about additional cable jumper