I Took My Modified 2021 Bronco Sport Badlands On The Bronco Off-Rodeo Trail in Moab, Utah: Part 2

Автокөліктер мен көлік құралдары

Now that we had completed the Bronco Off-Roadeo course, it was time to put what we learned to the test! Connor, Jared, and I where going to do a solo run on the same trail that were at the day before. We had decided to do Dome Plateau again to do a direct comparison between how my mods change the capability of my car vs the stock Bronco Sports we had used at Off-Roadeo!
I was also excited to grab a lot of shots of my car to document the fact that I had brought it to Moab, Utah! Other Off-Roadeo Courses around the country are on private land, where as the Moab course uses public BLM trails! Which is why I chose to come here! I wanted to take my own Solo trip! If you want to take your Bronco Sport on the same trail you learned on then Moab will be the place to do it!
=============================
📸 Follow me on Instagram: / bronchog
For Business inquires, email me at: dwj.johnsonfamily@me.com
---------------------
⬇️THE BRONCHOG'S MODIFICATION LIST⬇️
🟨 = Before Ownership: www.lge-cts.com/bronco-sport-...
🟩 = During Ownership: / bronchog
EXTERIOR MODS
---------------------
🟨 2021 Bronco Sport Badlands By Baja Forged
🟨 Originally The Big Oly Tribute Bronco Sport Dubbed Little Oly
🟨 Custom Paint Job by LGE CTS Motorsports
🟨 Custom One Off Front & Rear Bumpers by Baja Forged
🟨 Custom One Off Icon Suspension Kit
🟨 Custom One Off Borla Dual Exhaust
🟨 17x8.5-inch Method Race Wheels MR502 Wheels
🟨 265/65 R17 Nitto Tire Ridge Grapplers
🟨 Rigid Industries 360- Series 4 Inch Lights
🟨 Rigid Industries SR-Q Pro Flood Lights
🟨 Rigid Industries Rock Light Kit
🟩 Rigid Industries D-Series Ditch Lights Amber
🟩 Rigid Industries 40 Inch RDS SR-Series PRO Light Bar
🟩 Rigid Industries Amber Covers
🟩 Wilco Offroad Solo Hitchgate High Clearance
🟩 Method Race Wheels MR502 & Nitto Tire Ridge Grapplers Spare
🟩 Yucca MFG Light Bar Roof Rack 2.0
🟩 Yucca MFG Zombie Guards
🟩 Yakima Roof Awning
INTERIOR MODS
---------------------
🟩 Bulletpoint Mounting Solutions RubiGrid
🟩 Bulletpoint Mounting Solutions 4cm Mounting Arm & 20mm Ball Mount
🟩 Bulletpoint Mounting Solutions Handheld Radio Mount
🟩 Tactical Car Seat Back Organizer
🟩 Triangle Ceiling Cargo Net Pocket
---------------------
Camera Gear
---------------------
🎦 Main Camera: Sony A7SIII
🎦 Budget 2nd Camera: Nikon D5300
🎦 Main Lens: Sigma 24-70mm f/2.8 DG DN Art Lens for Sony E
🎦 Wireless Mics: RODE Wireless GO II
🎦 Drone: DJI Mavic 2 Zoom
🎦 Gimbal: DJI RS 2 - 3-Axis Gimbal Stabilizer
---------------------
THE MUSIC I USE
---------------------
EpidemicSound
=============================

Пікірлер: 26

  • @TeineSamoaTamaPalagi
    @TeineSamoaTamaPalagi15 күн бұрын

    Just commented on part 1, and now watched part 2. I am only adding 30" tires, and hope that would be tall enough to do some minor off-roading along with only a 1 1/2 inch lift. The thing I really like about your ride, is the full-size spare on the back. Can any Bronco Sport get something like that done, or is that a custom built thing? Also, your molly panels on the small back windows look pretty cool! Enjoyed the video again; look forward to watching more of your vids in the future!

  • @Feintgames
    @Feintgames15 күн бұрын

    Great cinematography. Fun truck. I have a 22 badlands. Love it. My only mods are K02s. After owning a heavily modded WRX, I think my modding days are behind me. But I wish I could fit your wheels and tires.

  • @Coloradohighcountrywheelin
    @Coloradohighcountrywheelin19 күн бұрын

    Amazing content brotha!

  • @coolfinsaquatics590
    @coolfinsaquatics59013 күн бұрын

    Just got mine 🎉

  • @frankromo7443
    @frankromo744317 күн бұрын

    I've been looking into these bronco sports. Definitely liking them more and more. Do you have a build list for yours? Looks badass man

  • @TheRealSpyderweb
    @TheRealSpyderweb21 күн бұрын

    Great video. I hope I can get by with no mods to my BS. But your mods all look good.

  • @cptiii
    @cptiii20 күн бұрын

    This was a really great video - way to go. Build is awesome!

  • @jamescross1989
    @jamescross198921 күн бұрын

    I just want your bumpers...and exhaust...and lift... lol

  • @dustinwjohnson

    @dustinwjohnson

    21 күн бұрын

    Well good news for you! Even though my exhaust was a prototype build by borla, I do believe since then they have come out with a system for retail that is the same or similar to mine! Same for the lift! Even though the Icon coil over and reservoir kit is a prototype build, there might be similar kits that are available on the market! Try Ford Ranger Lifts for a 2+ inch suspension kit! As for the bumpers... Sorry, those are one off and do not exist at the moment! Unless you can weld and fabricate something to look similar that is 😂

  • @siroliverdrab6067

    @siroliverdrab6067

    21 күн бұрын

    @dustinwjohnson the kit i used is a rough country 2 inch lift for the ford maverick. It required some shims on the front strut and larger spacers in the rear trailing arms to fit correctly, but between that and the 30 inch tire i have just over 11 inches of ground clearance. Lost a little bit of clearance from the jcr offroad skid plates, otherwise it would be almost a full 12 inches

  • @dustinwjohnson

    @dustinwjohnson

    21 күн бұрын

    Oh nice! I have not heard of someone using a 2 inch lift for the Maverick apposed to getting a Bronco Sport Specific lift! Sounds like it is giving a good amount of clearance though! What trim Sport do you have?

  • @siroliverdrab6067

    @siroliverdrab6067

    21 күн бұрын

    @@dustinwjohnson the big bend model

  • @siroliverdrab6067

    @siroliverdrab6067

    21 күн бұрын

    wish i could share a photo of the winch ready bumper i made for mine

  • @99Woodcutting
    @99Woodcutting16 күн бұрын

    Forged website still doesnt offer the high clearance bumpers :(

  • @Feintgames

    @Feintgames

    15 күн бұрын

    Baja Forged just made the mods for a show car to capitalize on the initial popularity of the BS and promote their other product lines, but they didn't want to lead the way on creating a modding community and risking that investment. So everything they made went nowhere, unfortunately. Of course, if you are friends with a fab shop, you can always just make your own bumpers. It's just pipes that are mandrel bent and welded with a sheet of aluminum to cover up the ugly bits. It would end up being a lot cheaper to pay a shop to make something than it would be to purchase one. And you could make what you want with lighting tabs where you want them.

  • @99Woodcutting

    @99Woodcutting

    15 күн бұрын

    @@Feintgames thanks for the reply! That makes sense, alot of risk for little reward. I'll definitely look for fab shops in my area

  • @richardmontoya3449
    @richardmontoya344921 күн бұрын

    What size of tires are you running on the bronco sport?

  • @jamescross1989

    @jamescross1989

    21 күн бұрын

    His entire build list is in the video description. 265/65 R17 Nitto Ridge Grapplers

  • @richardmontoya3449

    @richardmontoya3449

    21 күн бұрын

    @@jamescross1989 awesome thanks do the tires rub at all with that size off-roading?

  • @siroliverdrab6067

    @siroliverdrab6067

    21 күн бұрын

    Im running a 245/70r17 currently abd just got the new luft on mine. Wish i could head out to moab tho

  • @dustinwjohnson

    @dustinwjohnson

    21 күн бұрын

    There is no rubbing when on or off-road! However, with my custom bumpers there was definitely a lot of cutting that had to be done to accommodate them. They probably would be rubbing on a stock Sport!

  • @dustinwjohnson

    @dustinwjohnson

    21 күн бұрын

    Nice! What lift did you go with? And if you ever have a chance to go to Moab for Off-Roading, I highly recommend it! There are some beautiful views out there!

Келесі