I have a soft spot in my heart for these cars. My little brother passed away in 2013, he had an iroc in the early 2000s. It was far from stock and fast as hell. RIP Levi. I'm looking forward to the shenanigans on this car.

I love Isaac's smile and jubilee the moment the engine runs and he knows his $700 was an awesome deal.

@justinbuckhanan9950

5 ай бұрын

Always finding them online auction deals

@isaakwilson2727

5 ай бұрын

Looks and sounds like someone put some money in that motor to that alone might be worth $700

@PatientXero607

5 ай бұрын

Awesome until he learns that the front springs are a to get out and replace.

@user-yq4um7wu3u

5 ай бұрын

Heck the the hood, intake, carb and chrome stuff alone exceeds what he paid. I'm jealous!! ​@@isaakwilson2727

Man this was a steal for 700.00 dollars For some reason I always liked the look of the 3 gen camaros . Keep up the great work Ike👍

@Robert-ni6ut

5 ай бұрын

Thanks for the like Ike it's a really nice car I like it 😀

Ike, I had an 88 Monte Carlo SS with T Tops. The problem is the seals shrink and become brittle. If the seals on your tops aren't torn or raggedy take Vaseline or petroleum jelly (same thing) and run generous amounts around your seals and let it soak in and that will take care of your leaking T Tops. I've owned a few T Top General Motors vehicles and this little trick always worked1 Take Care and I hope you're doing well.

And Bro Isaac, again I'm so sorry for you and your brothers loss of Dad man and definitely feel your pain of loss. Lost my Pops this past July and it isn't something that you easily get over, especially when we lose our loved ones and the wisdom they've always had for us growing up! God Bless and I hope everyone is doing as well as possible. Grief takes its toll, but we must keep moving forward with life as well, otherwise we'll be consumed by the Grief itself! And this isn't what our parents would want for us. Much Love man and God bless brother. ❤ 🙏

Watching Isaac's videos, and cars and cameras just put me in a good mood, been watching since 2015, I literally watched all of the videos on cars and cameras, as they came out since 2015, keep up the good work:)

@Robrt32

5 ай бұрын

I watch these but cars and cameras not so much. It’s got to much go cart content. Which is kid content imo… it’s just not for me.

@darellsimons2687

5 ай бұрын

A 6k horsepower Kross kart is insane 🎉they have cac ​@Robrt32

@isaacitllbefine7231

5 ай бұрын

Glad you like them!

An absolute icon of an automobile!! Used to cruze in one when I was like 10-11yrs old with my best friend and his Aunt. Was metallic candy apple red, t-top car. It was so awesome when she'd take us out, made great memories.

I had a 91' RS back in the day ( got wrecked by an illegal u turn ) loved that car . It's awesome to see you saving another one .

Third gens are a ton of fun. I have an 83 that i bought when i was 15. I still have it 19 years later. Im in the process of putting a t56 behind my 6.0 in place of a 4l65e.

Today was a hard day because my grandma passed away about a year ago, and this vid along with the one from CarsandCameras made my day along with the smile you made after finding out the black bike had led lights, and John said something like "That smile means he already likes it" also nice to know that Mechanics with things like OCD or ADHD/ADD doesn't really affect them which encourages me to build something bigger that just a Mega Motto 212 for when I'm old enough to work on a Drumroll please.............Dodge Charger 2008.

Awesome find Ike! Little tip I learned from VGG: use 2-stroke fuel to help lube the cylinders at the first start in who-knows-how-long! Love your videos man I’d love to find a 3rd gen Camaro or that square body for cheap! We live and breathe this stuff man! Happy wrenchin’!

@majorwedgie8166

5 ай бұрын

I was thinking the same thing, you don't use much and Seafoam works as well.

This Camaro looks like it would be right at home in a Mad Max movie.

Makes my heart happy to see John in the video not the other way around on cars and cameras lol you guys always make a good team

Chuck "The Mullet" Jenky should've gone nuts over this car!😂 Right up his alley!

Great video really enjoy watching you repairing your never ending conquest of budget priced cars I think if you live to be 206 you will have them all on the road running at the same time. Congratulations on getting another resurrected. Have so much respect for you how you tag all your videos at the end with the memory of your Dad, God bless him Bill in Fort Wayne Indiana

@isaacitllbefine7231

5 ай бұрын

Thanks

I was hoping for a Cars and cameras Grand Prix lap time!

Little trick I came up with getting stuck wheels off. Offered to do brakes on my friends 2018 4Runner a few months ago and spent more than an hour trying to get one single wheel off, all 4 were SUPER stuck. I think they use hubcentric wheels and there was quite a bit of corrosion on the hubs once I did get wheels off. Anyway, I loosened all of the lug nuts about half way, jacked it up high as I could and put a 4x4 under the inside edge of the tire, dump the jack fast as possible. The tire landed on the 4x4 and instantly came unstuck. Might be a good trick in the future. Love the car, what a smokin' deal man!

To get that wheel off, you'll have to spray the hub and lug bolts with kroil and let it soak, then hit the rim from the backside with a big dead blow hammer. Then clean the rim hub and axle with a wire wheel and remove the corrosion, then liberally coat the hub in anti seize. I did that with every wheel i did when i was a tech at a gm dealership and Goodyear

I had a 1986 trans am man. I had so much trouble with mine, but I did enjoy my t tops in mine

hell yeah bro love it when its running right that thing is going to be a fun ride . would love to see more of this car.

I'm so glad you got a good deal!! Great video. I'm sorry for your loss. Lost my Dad January before last.

That I believe is actually a Z 28 with the TeaTop option I have the Z 28 hardtop. The Iroc’s was a different option. The Iroc’s should’ve had the tune port engine.

@Halliday7895

5 ай бұрын

lol people yank that crap out in the 30+ years since it was new haha

@SaneCayne

5 ай бұрын

@@Halliday7895 The Joe Dirt fiberglass hood and Cherry Bombs would've been my first clue. 😆

@Joesmusclecargarage

5 ай бұрын

Dead wrong 🤣The IROC was available with the LG4, the L69, L03, LB9, and L98. The LG4 and L69 were carbed.

Not bad for a running driving Z28 , can't wait for more on this.

Love that generation of camero! Would love to have one! Great video!

Thanks for the videos! 👍👍

.Great find Issaac. Aluminum rims may look nice,but try to change a flat.When Dorf had the tire recall in the 90's,3 mechanics took turns with the big sledge hammer like you used.I finally grabbed a 4 Foot wrecking bar and pried between the rim and brakes.That's how we had to do over 100 trucks and cars.Aluminum rims weld themselves to steel hubs and brakes.

Hey Ike, You always have great videos! To help loosen up a stuck wheel, Try loosening the up the lug nuts a bit & just drive it around a little bit, snd that should break it loose! Worked for me!

Love your channel. Thank you for changing the music.whatever the old stuff was I had a hard time with. The camaro is awesome.that would be my dream find.

@isaacitllbefine7231

5 ай бұрын

My editing software sucks and only let me put certain songs on certain clips so we just got lucky on this one

The complete autozone aisle of performance parts on this I love it 😂 spectre hose covers the air cleaner the edelbrock carb and the old duralast gold top battery feels nostalgic for me I worked at the zone for over a decade and recognized a lot of that stuff under the hood thanks for that bud love your videos keep em up brother!

Great find!!

Was completely surprised about the sleeper Z . Great purchase

God bless you brother. You are amazing

Nice beefy car Isaac....glad your feeling better...That camaro is a beast!

I had an 83 with Iroc rims from the junkyard. Man I wanted those t tops so bad back in the day. Great find!

Great find! The 3rd Gens are by far the most popular Camaro/Firebird builds now, Atleast out here in the Southwest/West. I'm starting to see alot more of them show up at Cars and Coffees, Cruise-ins and Local car Shows

Such a beautiful car @issac it'll be fine , its one of Dream cars im looking foward go seeing what your gonna do with it

I own a 91 firebird and 91 gta trans am, both third gen's as well. They are awesome and reliable cars and handle great I daily mine. Love it! My trans am sat for 20 years with a bad fuel pump before I got it, new fuel pump and fired up like it never sat

Dude! Another sweet find! 👍

Hey Ike ! Love your videos man, you are an incredible engineer/mechanic ... so thats the one in the yard all this time ! I had no idea it had such a shiny engine ! Hot Dang

@isaacitllbefine7231

5 ай бұрын

Lol. I didnt even know it had a engine when i bought it

Oh how i wanted one of those beauties in high school, had to settle for the next best things a 85 Corolla lol. Another great video thank you

great stuff thanks, nice score on the car

Such a cool car man good luck

Nice find 🎉 ❤

I been waitin on this video 👍

Love this one 👍

race bullets and side exit exhaust, nice!

Was waiting on this guy to open the garage door but I guess he like breathing in exhaust

They were always red as I remember ,nice find

THX IKE!! 🙏 Be safe and drive careless! 🤪. 👊✌️❤️🤙🤙🤙

I had an 85 base model flat black 383 stroker and at a car show for HotRod mag it got stolen It's never been seen again. I made a fiberglass hood scoop and fender flares to fit the massive G-50-15 Micky Thompson tires and it ran 9.30's every pass. Get sub-frame connectors or she will twist. I'm sure you will love it as I did mine.

Great find Isaac!! F-Bodies RULE!

Had a 92 bone stock with a 305 and the big wing on the back when I was 18,,loved that car

Sounds like it has a decent bump stick in it, someone definitely put some love into the drivetrain

Keep up the work Isaac 👍👍

I have an 86 z28 camaro 305 TPI that is in the shop getting swapped to a carburetor because the previous owners butchered the wiring and it would run now and then but mostly not run. I'm hoping the carb will make it perform better and be a lot easier to work with.. I absolutely love the 3rd gen camaros and this video was very enjoyable to watch.

That was interesting the way you got the old gas out

The suffix code will tell you the exact Info on the stock motor. Right behind the alternator on the flat tab where the water pump mounts up.should be some numbers ending with 3 letters like say CKB. Every motor we ever bought for our cars "Novas". That's the numbers we used. Tells the stock hp and all the goodies info. So we wouldn't end up buying a 140 hp 350 or weak 305.

This will be a fun cruiser for next years run what you brung!

Cool car and a great deal.

I absolutely love the custom exhaust on that Camaro

Love to see more on this car

I'd probably pull that motor and go thru it...run your vin to see if it is a true Iroc...your title should say,but you should already know that....love ya'lls videos, content keep'em coming guys..HAPPY NEW YEAR FROM TENNESSEE

Early Irocs could come with the carbed 305, TPI 305, or TPI350(and later a 305 TBI)...so the setup on this Iroc was probably originally a carbed 305. The drum brake rear is also kind of a hint it was the base Iroc. The Firebird counterpart Trans Am GTA only came with a TPI 305 or TPI 350, but the Formula could get a TBI 305, TPI 305, or TPI 350. All the TPI 350 equipped f-body cars also would come with a Borg Warner 9 bolt disc brake posi-trac rear end. For 700 bucks, you did good. The problem with the rims being stuck is common. The aluminum rims start to corrode and basically freeze up on the rotors/drums(well, actually part of the axle that pokes out of the drum center on the rear) at the center. Get a Harbor Freight port-a-power kit and some PB Blaster lube to get them freed up. Spray the centers and on the inside thru the spokes, and then set up the porta power from rim to rim and a little push at the rim(put a 2x4 board between the rims and the rams so to distribute the pressure and reduce the possibility of damaging the rims) and they should pop loose.

On the inside of the car behind the back seat,underneath the carpet there should be a rectangle shape on the sheet metal. If so, the fuel sending unit is right under it. Most people cut it out and go to the junkyard and cut another one out, just a bit bigger,so you can make a trap door for it. It beats dropping the rearend out to change out the intank fuel pump and sending unit. Good luck

You didn't go wrong with that one. Wow. Do the Chevette!!!

Grew up with one of these. Dad got it fully loaded. My Mom hated it (lol). I remember the new car smell being very distinct. And the hatch liked to either not close or open by itself randomly. But it was kinda fast so I thought it was cool as hell. Edit: side note: the T-tops leaked even when it was new.

It looks like a real iroc. The only way to tell for sure is to look up the rpo codes in the center console.

The car sounds good 👍👍

You killed it with this 700 car man. Very nice and worth 6 times that.

I was shouting at the screen"carbs on fire" waiting for the leaves n stuff to catch🤣 😂👏🏻👍🏻🇮🇪

This is a hell of a pickup. But damn get you a fan going in that shop 😂

That's cool I have a 87 IROC Black and gold t top regional 350 car. on my channel Nice to see another one gets saved.

$700 MAN! That's a GREAT DEAL!!! It's gonna be a smoker!! Tires I mean LOL.

Nice camaro that was what I bought my son for his 16th birthday one tough car

Ike you’ve got the coolest damn car collection.

When i was a teenager my mom bought a brand new 89' IROC with a 305 auto with a performance chip from GM and out ran all my friends with 5.0's. I have always wanted one since then.

Seeing Issac in working on the car with music similar to fallout 3s in combat music had me rolling laughing for a second 😂 I was yelling at my screen saying the carbs on fire😂😂 that's possibly a timing issue with it backfiring through the carb (too advanced) it could be the old fuel though. Stuck floats? Gotta love that ethanol 😂😂. Bring back leaded gas

You made a good purchase Ike.

Knowing this is a vid and Isaac can't hear me, at 19:58 I got up to get my fire extinguisher. I need more coffee.

That's awesome. I swear you get so many great deals. You should take the Camaro and your fox body 5.0 mustang to the track and see what's faster.

Chuck Pre-approval 😂 I had a 3rd gen fb 84 well balanced car 👍👍☮️

Isaac another great find. Easy to see how happy you are 😂. This Old Man hopes to see it when you bring to Washington. Always loving your videos. 🛵🧔💝

Cool IROC time for the Smoke wrench to get those wheels off

Nothing more 80s than a T-top car. Nice 3rd gen.

I like the opal gt in the back ground. Iroc's came with tuneport 305's

I love T-Tops. Been trying to get my hands on a 83 T-Top Mustang.

Super jealous! That was my first car back in 1999. Isaac! Those rims are wider in the back the front are a half inch thinner. I can’t remember

Excellent video Issac :) my late Uncle Bill had 1985 Chevrolet Camaro Berlinette in Baby Blue with T Tops , 350 V8 4 barrel carb, true daul exhaust from manifold back , power steering . brakes , cruise control, tilt steering , Turbo 700SR 4speed Overdrive Automatic transmission , am/fm Cassette radio , power trunk , he bought new and in 1989 trade for I Roc Z RS model Chevrolet Camaro, in Red Cherry also Silver trim had everything like other 1985 car had but no T Tops a Sunroof power one , plus Security systems plus key fob to! But 305 High Output V8 in 2009 he got me restoration to took clutch fan of Water Pump pulley , put 2000 CHEVROLET Impala electric fans on plus 4 core from 1976 Chevrolet Impala car install it and new fully frame not Unibody types ! Then he want 350 heads on true daul exhaust also 390 rear end gears in plus had only 178.000 and in 2011 he past away also car sold to ! Saw in Vechiles junk yard bad accident it was in and not fixable! I heard happened in vechiles accident and not good ! Isaac I say got nice car for a good deal and paint shine up beautiful ride ! Also Issac check out see if that Chevrolet Camaro Z28 was made in St. Theresa , Quebec Canada 🇨🇦 plant be so cool if was made there !

I had a Z28 back in August and I paid 700 bucks. Turned around and flipped it and I came out good .My friend has a RS steel hood with scoops if you're interested .

Would you take 800 (; Awesome deal on the IROC You are the man Isaac .

A smokin' deal for sure. While 98% of all IROC cars had the IROC emblazoned all over them, there were at least a couple hundred "California Special" available only in white or black versions that were true IROC's with all the body work and louvered hood but only said IROC inside the car and on the rocker panels. I know this because my best friend's brother had one and he spent quite a bit of money on it after I blew his doors off at Carlsbad drag strip with my V6 Capri that ran 13's (fast in the 80's) for a daily driver. Kind of a shame this one lost the fuel injection a long the way.

Wheels have different offset. Rear has to stay in the rear. My 82 Z28 had a factory fiberglass hood. My 91 Z28 had a steel hood from the factory.

I just picked up a 84 for 500 few weeks ago fresh rebuilt 305 needs finished up but runs good

awesome.God bless.

Great video l think it might be a z28 it has drum brakes on the rear unless someone changed the differential and was a disc brakes rear differential at one time still a nice Camaro..... Cheers

❤❤❤❤🎉 bro love that car my dad had one when I was 14 it was a beast he sold it before I got to drive ❤🎉🎉🎉🎉

I have been patiently awaiting an explanation on your intentions for this fabulous 1990s Icon!

@billbong156

5 ай бұрын

80s icon but I agree

Best way to get that wheel off is to get a big ass pry bar and pry behind the wheel between the rim and the drum.

Very cool. Sounds like Hot for Teacher!

I think you got a great deal. Because I can't find one with door's axles trunk or anything for under five grand