I make a thread copier

Ойын-сауық

Any type and any size of thread can be copied with this machine. It can even be threaded on a conical workpiece. any size of thread on any size of shaft.
Welcome to INNOVATION TIME.💐
I try to make some useful diy tools to doing job easier and faster. These diy tools is for metal working and welding projects. Many ideas for making diy tools you can find here. If you have diy tools idea for this channel, comment me please.
I have made a thread copier. we need two chuck and two bearings. I know it can be made better than this, but I have some limitations and I made this tool idea in this way. For example, bearings place should be machined and bigger Chucks should be used. Having a lathe machine is my old dream, that I couldn't buy it yet.
Your support will allow me to have more and better equipment to better implement such these ideas.
To support this channel, use Super Thanks and pay the membership and share this video with your friends.
Make this diy tool easily 😉
Support this channel with likes and comments 👍
Please don't forget to subscribe 👆
yun.ir/1v78ad
Playlist:
• Bearing puller
• DIY
If this video helped you out share it with your friends 👉

Пікірлер: 219

  • @josetapia4948
    @josetapia4948 Жыл бұрын

    Excelent idea. Thank u for share iit ✌️👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @yachtsteve
    @yachtsteve Жыл бұрын

    My first thoughts when watching this was that's quite a bit of butchery, but it really is a fantastic idea and like most of the other commenters said there's room to improve on this and make a really good simplistic thread cutter. Good luck and I hope you get your lathe soon

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Many thanks bro 🙏🌹🌹

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    your 1st thought is correct , butchery is right , hack , grind , weld up some junk to make more junk... oh and welding on bearings always makes me giggle....

  • @user-ws2tz7qw4w

    @user-ws2tz7qw4w

    4 ай бұрын

    Ilmu yang bermanfaat😊

  • @pablow1549
    @pablow1549 Жыл бұрын

    GREAT GREAT JOB, SIMPLE AND CLEVER. GOD BLESS YOU.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏❤️

  • @user-hv9oj6lv9w
    @user-hv9oj6lv9w10 ай бұрын

    Brilliant!. For the home workshop, that's it

  • @innovationtime20

    @innovationtime20

    10 ай бұрын

    🙏🙏❤️❤️

  • @daxmakes
    @daxmakes Жыл бұрын

    The concept behind this is quite clever. I have a plain-turning lathe which can't cut threads, but with a similar setup, I could probably make something with a set of common inserts (M6, M8, M10, etc) to be able to do the job. Nice work!!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Hello dear Dax I am also building a lathe that cannot make threads, which will probably be ready in a few months😉

  • @imommingboyev832

    @imommingboyev832

    Жыл бұрын

    7

  • @mff7819

    @mff7819

    11 ай бұрын

    try a cutter for key duplicating machines

  • @computername

    @computername

    2 ай бұрын

    @daxmakes Interesting, I have a similar predicament. Picked up an antique Drummond lathe with missing change wheels. I was looking around ideas to get around re-manufacturing the original gear train. Have you tried to set this up, and what are your thoughs of how this could be integrated to a lathe?

  • @daxmakes

    @daxmakes

    2 ай бұрын

    @@computername I have not yet, as I haven't had a use for it, but I'm still adamant is could be done. You'd need to find very high tolerance nuts and bolts to use as your 'master', though.

  • @TalRohan
    @TalRohan Жыл бұрын

    With some tweaks to take out any slop and kick back I can see this being useable to copy big threads for vice making.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @DewaSenapanIndonesia
    @DewaSenapanIndonesia Жыл бұрын

    Your idea is indeed good , you can be called a genius . greetings friends from Indonesia 🙏🙏🇮🇩🇮🇩

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Dewa 🙏🌹

  • @victorvasquez6492
    @victorvasquez6492 Жыл бұрын

    Misas sinceras felicitaciones por una excelente idea , cuando se aúnan ingenio con necesidad la capacidad del ser humano es asombrosa , apartir d este dispositivo con ciertas variantes acordé a la necesidad de cada quien , trabajos q se encarecian yo o cualquiera los puede realizar con un costo mínimo , desde Virrey del Pino , la Matanza, Bs. As. ARGENTINA un gran abrazo y que sigan los éxitos 👏👏👏

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Victor 🙏🙏🌹🌹

  • @111111ganesh
    @111111ganesh9 ай бұрын

    It's 100% perfect copy paste program of thread

  • @nathkrupa3463
    @nathkrupa3463 Жыл бұрын

    Excellent work brother 👍👍.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you 🙏🙏

  • @johnrako
    @johnrako Жыл бұрын

    Excellent idea. I can see a variation being used to cut very large threads in wood for wooden screws and other parts. The template thread could be as simple as rope or cord wound around a mandrel or even just a helical mark made by hand to guide a .pointed indicator. The cutting side could be a wood router with a V-shaped cutter.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏🌹🌹

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    stop encouraging this goofy solution to a problem that does not exist ...

  • @tilluballu6009
    @tilluballu6009 Жыл бұрын

    Very nice idea 💡 and there implementation.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @Bianchi77
    @Bianchi77 Жыл бұрын

    Creative video, thanks for sharing it :)

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @user-wl3bs5by9g
    @user-wl3bs5by9g Жыл бұрын

    You are a genius, congratulations

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @homemadetools
    @homemadetools Жыл бұрын

    Clever build. We shared this video on our homemade tools forum this week 😎

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍🙏

  • @juanmanuelmartinezaguilar2029
    @juanmanuelmartinezaguilar2029 Жыл бұрын

    Excelente vídeo, GRACIAS POR COMPARTIR, la creatividad de sus ideas, no tiene límites. GRACIAS !!!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏🌹🌹

  • @whuidemu
    @whuidemu Жыл бұрын

    Good idea 👍👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @sulistiantoassa7176
    @sulistiantoassa7176 Жыл бұрын

    Kereeeennnn dan mantaaaap sungguh ide yg sangat cermelang tinggal di Sempoornakan lagi Mas Broo👍👍👍☺️🇲🇨🇲🇨

  • @jorgecorreadasilva4354
    @jorgecorreadasilva4354 Жыл бұрын

    Sem sasional da hora parabéns pela sua inteligência

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks 🙏🌹

  • @euclidesdesouza6134
    @euclidesdesouza6134 Жыл бұрын

    Muito engenhoso. Parabéns.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks 🙏🌹

  • @MrWreeve
    @MrWreeve Жыл бұрын

    Using the law of averages on your nut, very precise threads can be made using very similar methods

  • @flaviobr1576
    @flaviobr1576 Жыл бұрын

    Very good idea. I do this on my homemade lathe.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌

  • @miguelcastaneda7257
    @miguelcastaneda7257 Жыл бұрын

    Creative n looks like slower feed rate is what does it might suggest some form of dead stop on cutter so you could repeat cut at same depth a couple times...dust off material

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @gilmarsouza4607
    @gilmarsouza4607 Жыл бұрын

    Boa noite amigo excelente vídeo ótimo projeto muito top gostei bastante parabéns pela criatividade.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏🌹🌹

  • @bustednuckles2
    @bustednuckles2 Жыл бұрын

    Interesting concept!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @Mrsunrisezero
    @Mrsunrisezero Жыл бұрын

    VERY GOOD

  • @aubrymacielpereirafilho3017
    @aubrymacielpereirafilho3017 Жыл бұрын

    Muito bom valeu muito obrigado!!!.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

  • @musanjeisa7363
    @musanjeisa7363 Жыл бұрын

    How about adding a smaller pulley at the end and connect to a motor then weld a collet to hold the cutting tool in place ,I think it would work perfectly

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    good idea 👍

  • @mahmoudharby6830
    @mahmoudharby6830 Жыл бұрын

    ذكاء عالي ماشاء الله الله ينووور عليك ❤️❤️❤️👌👌👌👌

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏❤️❤️

  • @garagem7644
    @garagem7644 Жыл бұрын

    A idéia é ótima!!! Se fizer as peças mais centradas e com menos folgas ficara perfeito!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Obrigado, meu amigo🌹

  • @santhiyavasanthan1917
    @santhiyavasanthan1917 Жыл бұрын

    ❤ super 🎉😂😊

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @mahmoudharby6830
    @mahmoudharby6830 Жыл бұрын

    Inechtin smart good 👍 work

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️❤️

  • @neilhansen9886
    @neilhansen9886 Жыл бұрын

    Very clever

  • @domingosbonifacio197
    @domingosbonifacio197 Жыл бұрын

    É muita inteligencia parabéns

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Obrigado, meu amigo🙏❤

  • @orojasp
    @orojasp Жыл бұрын

    I loved the idea! Congratulations!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @bbcisrubbish
    @bbcisrubbish Жыл бұрын

    An ingenious idea. I expect some one will refine it.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @otonielpedro3016
    @otonielpedro3016 Жыл бұрын

    Excelente 👏😀

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks 🙏

  • @PerfectWayDIY
    @PerfectWayDIY Жыл бұрын

    Brilliant Idea, I think it is applicable for big threads only 1.5, and 1.75 due to disc thickness.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍👍

  • @kannants2651
    @kannants2651 Жыл бұрын

    Appreciate it man,nice work 👍👍👍

  • @ezequieljosedossantos
    @ezequieljosedossantos Жыл бұрын

    Show de bola

  • @earthstewardude
    @earthstewardude8 ай бұрын

    I bet the NASA engineers would love to have this in their research and development lab.

  • @innovationtime20

    @innovationtime20

    8 ай бұрын

    👍

  • @italocianci4090
    @italocianci4090 Жыл бұрын

    N’eur e t’accatt na barr da nu metr. Quand casen!! 👍👍👍

  • @AlbiesProductsOnline
    @AlbiesProductsOnline Жыл бұрын

    Technically you could make a lathe style cutting tool from a hss drill bit and add it to the cutting side because you basically have a crude lathe machine

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌🙏

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    please do not encourage this junk.

  • @hemnat2000
    @hemnat20004 ай бұрын

    Geneious

  • @innovationtime20

    @innovationtime20

    4 ай бұрын

    Thanks 👍

  • @Anhad1313
    @Anhad1313 Жыл бұрын

    Very nice

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @georgereevesfarm4898
    @georgereevesfarm4898 Жыл бұрын

    Thank you for sharing! I too have a lathe that cannot cut threads. This will help me. Thank you.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌❤️

  • @yoktsolomon6566
    @yoktsolomon6566 Жыл бұрын

    Nice, nice

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks🌹

  • @dioscoromantalaba1961
    @dioscoromantalaba1961 Жыл бұрын

    Brillant idea, iam very thankfull for this idea

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏🌹🌹

  • @hayathayat1462
    @hayathayat1462 Жыл бұрын

    Bravo Turkey İzmir selâm 👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Hayat 🙏

  • @user-rt9vs3lb4f
    @user-rt9vs3lb4f Жыл бұрын

    👍👍👍

  • @heracles6431
    @heracles6431 Жыл бұрын

    ¡¡No termino de entender este desperdicio de inteligencia y evolución humana a estas alturas!! Este video me recuerda, cuando el hombre primitivo en su origen, mirando, y estrujando su gran cerebro al contemplar un piedra semiplana, y empezó a quitarle las puntas, las aristas más protuberantes....y "Eureka" La rueda. ¡¡Eso fue un gran descubrimiento!! ¡!Pero lo de este video....es un puro, y vano entretenimiento!!🥴😜

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

  • @daveleach4357
    @daveleach4357 Жыл бұрын

    I like your innovation and desire to produce, Good Work.😊

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Dave 🙏

  • @kulebyakinjoe
    @kulebyakinjoe Жыл бұрын

    VERY COOL AND USEFUL THING, WE SHOULD TRY IT AGAIN

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌

  • @rubinelemoura593
    @rubinelemoura593 Жыл бұрын

    Parabéns amigo uma ótima ideia viu

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🙏🌹🌹

  • @gamalatef
    @gamalatef Жыл бұрын

    جيد يا صديقي فكره جديده ورائعه

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    شکرا 🙏🌹

  • @imedakhujadze9607
    @imedakhujadze9607 Жыл бұрын

    ძალიან კარგია მადლობა

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

  • @cristianpopescu78
    @cristianpopescu78 Жыл бұрын

    You are a Genius! Besides ,It looks so great!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Cristian 🙏

  • @gerardgolder4901
    @gerardgolder4901 Жыл бұрын

    Clever

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @peterblair6489
    @peterblair6489 Жыл бұрын

    You ever heard of Lagonda. They made custom bolts. Extremely expensive. You could make a fortune making them.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍👍

  • @SC.243k
    @SC.243k Жыл бұрын

    Great work

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @omsingharjit
    @omsingharjit Жыл бұрын

    Can you do the same to Cut Acmy thread ?

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @gergemall
    @gergemall Жыл бұрын

    Genius

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @dianelitteken874
    @dianelitteken874 Жыл бұрын

    Ingenius

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @mikep.coplin6800
    @mikep.coplin6800 Жыл бұрын

    Surfing KZread, seen your video, have comment: I would have to give you a GONG, GONG, GONG. You chasing your tail here, all you should do is weld up a tool post holder (install a nicly ground thread cutting bit) and adjustment screw. Put a large hand crank in the place of the drill and make it all done by hand. Remember the machinist hand book says about threading crews, feed it in at 29 1/2 degrees. Anyway interesting concept for a all manual or hand made threading machine tool. Scrap the power tools all together and be a real caveman dwelling innovator.....lol. ;-))

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    surfing also ... and i wish these videos would show the finished project first and how they are used to solve a real problem. before wasting our time watch sparks fly to make some butchered up junk.

  • @georgetsakalis7219
    @georgetsakalis7219 Жыл бұрын

    The Idea is true, if you modify the disc in 60 degrees for metric system or 55 degrees for English system you will grow better screw

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌 Thanks bro 🙏🌹

  • @arduinomaquinas
    @arduinomaquinas Жыл бұрын

    Se o assunto é máquinas e dispositivos, tamujunto, parabéns, inscrito & Like 1.5k

  • @mnsoran7002
    @mnsoran7002 Жыл бұрын

    Le concept est bien sauf que le produit fini laisse a désirer en terme de qualité, bravo.

  • @domonsang1606
    @domonsang1606 Жыл бұрын

    สุดยอดขอบคุณครับ

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🌹

  • @ayoubansari5215
    @ayoubansari5215 Жыл бұрын

    Brother, if I want you to make an auto machine, can you make it? I am from Pakistan and you

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Hi dear Ayoub I'm from Iran. I think that I have not enough equipment for this

  • @BENGLASBERKAHCHANNEL
    @BENGLASBERKAHCHANNEL Жыл бұрын

    Kreatif ide yang jarang diketahui orang...benar benar bagus👍👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks 🙏

  • @user-ns6iv1vr6v

    @user-ns6iv1vr6v

    Жыл бұрын

    А что именно хорошо? Рукожопство? Идиотизм?

  • @JulioCesar-ib8jf
    @JulioCesar-ib8jf Жыл бұрын

    👏👏👏👏👏👍👍👍👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @strykerjones8842
    @strykerjones8842 Жыл бұрын

    I haven’t read any comments so forgive me if these points have been mentioned. Threads have a precise angle that must be met by the cutting tool which varies by the thread type. The depth of the thread from crest to root is just as important. I won’t even address concentricity

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks dear Stryker 🙏🌹 I got it 😉

  • @garymucher4082
    @garymucher4082 Жыл бұрын

    The idea isn't the problem, the cutter is. You need to be using a thread cutter to actual cut the treads. And with that type cutter, you will also need a way to adjust how deep you initially cut them. It takes a few cuts to get to where you will have workable, useable threads... Grinder cutting disc don't have the proper "V" groove to make such thread cuts. And even if you had the proper "V" groove cutter, it would take a lot of power to cut the threads, meaning more HP on the spinning drive motor. But keep experimenting. You will get it working...

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thanks bro 🙏

  • @user-kg4vs5ce5p
    @user-kg4vs5ce5p Жыл бұрын

    Это "изобретение" на орден Полуляха второй степени тянет...

  • @nilton183
    @nilton183 Жыл бұрын

    Quanto custa uma paradinha dessa

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️❤️

  • @tristantaus4556
    @tristantaus4556 Жыл бұрын

    Amazing! I need to find spare parts

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏❤️

  • @ericvazquez2295
    @ericvazquez2295 Жыл бұрын

    Sería genial con un motor de microondas

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌👍

  • @andrewraugh1622
    @andrewraugh1622 Жыл бұрын

    Cleaver idea!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🙏🌹

  • @enriqueorlandovega9831
    @enriqueorlandovega9831 Жыл бұрын

    Tanto lío para hacer una rosca.lacompras y listo 😂😂

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    😉

  • @robertmccully2792
    @robertmccully2792 Жыл бұрын

    Creative mind.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you dear Robert ❤️

  • @cokhichetaohongphuong
    @cokhichetaohongphuong Жыл бұрын

    Ok khi k có máy tiện

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @bubbapate5740
    @bubbapate5740 Жыл бұрын

    That device clearly does not make a very good threads.

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

  • @axcreates_official
    @axcreates_official Жыл бұрын

    Creative idea!! Very well done my friend! 👍

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Many thanks bro 🙏🌹🌹

  • @nerisdf
    @nerisdf Жыл бұрын

    Muito bacana parabens....

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    obrigada🙏

  • @MrPsics
    @MrPsicsАй бұрын

    Почему не используется плашка и все?

  • @innovationtime20

    @innovationtime20

    Ай бұрын

    😅👍

  • @ramonching7772
    @ramonching7772 Жыл бұрын

    This guy haven't heard of threading die?

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    I have some dies but none do them doing that Any size Every step Conical thread

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    i would have been impressed if he used the grinder cutoff wheel to cut the bolt threads off and weld the threaded portion to the mild steel round stock ....LOL

  • @gotensan608
    @gotensan608 Жыл бұрын

    can make improvement

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍🌹

  • @lohikarhu734
    @lohikarhu734 Жыл бұрын

    it ain't pretty, but those do look like threads ;-) If you can't get the right size die,, and, even if you can, they can be damned hard to use in those big sizes!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌

  • @user-wl3bs5by9g
    @user-wl3bs5by9g Жыл бұрын

    Very very good

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Thank you my friend 🙏❤️

  • @ricardomarata6043
    @ricardomarata6043 Жыл бұрын

    👏👏👏👏👏👏

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    ❤️

  • @alexandralien3941
    @alexandralien3941 Жыл бұрын

    К доктору, срочно к доктору Дью его!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @canberradogfarts
    @canberradogfarts Жыл бұрын

    Its called "Thread Milling" and its olde. The runout is bigger than the thread depth. Really?

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    Hello my friend I made this tool with a mental design and I have never seen anything like it before If you have seen a similar tool before, please let me know Thank you

  • @bobododoo3925
    @bobododoo3925 Жыл бұрын

    1:12 гайку лучше надеть перед тем как отрезать

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👌👌❤❤

  • @evanangeletos964
    @evanangeletos964 Жыл бұрын

    This is how some old lathes used to machine threads.

  • @jimthesoundman8641
    @jimthesoundman8641 Жыл бұрын

    The concept is great but the execution is terrible. I'd rather spend the money to buy the appropriate sized tap and die than try to cut threads using this contraption. Far simpler and easier.

  • @user-xd2xs3kr5k

    @user-xd2xs3kr5k

    10 ай бұрын

    the concept is ..... i have a welder , angle grinder , scrap metal , a video camera and a lot of time on my hands. ,,hummmm now what kind of contraption can i butcher up. ??

  • @user-zt8vj6ul7u
    @user-zt8vj6ul7u Жыл бұрын

    РИЗВАН ДИГАЕВ 1 секунду назад лучше сперва показывать конечный "результат" заинтересованный потом бы просмотрел-бы

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @user-pi8vt7ut3n
    @user-pi8vt7ut3n Жыл бұрын

    ...а просто плашкой уже не судьба резьбу нарезать?!!

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @ryanbeard1119
    @ryanbeard1119 Жыл бұрын

    Get on of thelose green cutting wheels and dressit to the thread angle 😑😑

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    👍

  • @jeanmacambira9873
    @jeanmacambira9873 Жыл бұрын

    💯💯👍👍👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷

  • @innovationtime20

    @innovationtime20

    Жыл бұрын

    🌹🌹

  • @oliviodesouza3156
    @oliviodesouza315613 күн бұрын

    0:10

  • @innovationtime20

    @innovationtime20

    12 күн бұрын

    ?

Келесі