Very very good job…

@RuskiWeldFab

2 ай бұрын

Cheers

It will look awesome! Cut bumpers I love but that makes the Clio look bad ass

End of lockdown "whole car is carbon-kevlar"...lolol Soon you'll need to start adding weights to get better traction :)

@RuskiWeldFab

3 жыл бұрын

Haha well at least I will be able to distribute the weight evenly haha

Great job

@RuskiWeldFab

2 жыл бұрын

cheers

Some great ideas for weight reduction there , really like the green and Kevlar colour combo , keep up the crazy great ideas , can't wait to see more 👍

Gearing up to skin some parts on my cars. Love learning from your videos and gaining confidence to just do it.

@RuskiWeldFab

8 ай бұрын

You can do it!

just found your Channel.... LOVE IT ALREADY !!!! REAL Craftsmanship. I also wrench in a tiny Garage / Shed and restored an entire Classic Car. People womnder how i did this... whithout large Equipment.

@RuskiWeldFab

2 жыл бұрын

Welcome aboard!

Loving the Carbon-Kevlar videos. You have gave me ideas for mine now 😎

@RuskiWeldFab

3 жыл бұрын

i am glad! go for it!

Just gotta say. Ive been watching alot of your stuff. I have been wanting to get into composites for a while but the main thing holding me back was thinking I needed to pull a vacuum to get the best results (weight wise). You proved to me that excellent results can be had with simple skinning! I have an AutoX car that i need to find about 130lbs to remove (and I am not allowed to gut the car) so I think I may take the plunge here this next offseason and get creative.

@RuskiWeldFab

10 ай бұрын

Exactly! Great results can be achieved with just skinning

I just found you and been binge watching I love your content.

@RuskiWeldFab

2 жыл бұрын

Welcome to the club 😃

Great work, absolutely smashing it 👍🏼

@RuskiWeldFab

3 жыл бұрын

Thank you!!!

@robsmithracing

Жыл бұрын

@@RuskiWeldFab I don’t suppose you can make panels out of fibreglass for me could you? 😁

Hello im here (ayhem was here)

@RuskiWeldFab

3 жыл бұрын

welcome!

Love it, looks sick can't wait to see whats next

@RuskiWeldFab

3 жыл бұрын

thank you! next i will wrap up in carbon haha

Can't wait foe the next episode

@RuskiWeldFab

3 жыл бұрын

thank you!

Awesomeness very nice I like it.. From Malaysia.

@RuskiWeldFab

2 жыл бұрын

Thank you! Cheers!

Good fucking job, ima do it to my front bumper, since im going full carbon fiber.! Thank you! 👍👍

@RuskiWeldFab

2 жыл бұрын

cheers!!

Looks awesome mate, love it!

@RuskiWeldFab

3 жыл бұрын

Cheers! I love it!

Always ready for your videos 👍

@RuskiWeldFab

3 жыл бұрын

Good man!

Really Enjoyed that one 😍 extremely jealous of all the composite work

@RuskiWeldFab

3 жыл бұрын

Thanks a ton!

Glad I stumbled onto to your channel. Really cool stuff for the DIY garage guys!! 👊🏼

@RuskiWeldFab

2 жыл бұрын

Welcome aboard!

Quality, nice job!

@RuskiWeldFab

3 жыл бұрын

Thank you! Cheers!

Love it 👏🏼

@RuskiWeldFab

3 жыл бұрын

Thanks!!

Your crazy & i like that

@RuskiWeldFab

2 жыл бұрын

cheers man!

Credit where Credits due, looks bloody good

@RuskiWeldFab

3 жыл бұрын

thank you! much appreciated!

I love it, make sure when you do whatever you're doing in the rear arches you look at Section 5.6.5 of the regs: "Front and Rear tyres should not be visible by more than 100mm above the axle line at any point when viewed from the rear of the car" I recently trimmed my bumper and only spotted this after! 🤦‍♂️

@RuskiWeldFab

3 жыл бұрын

cheers! funny enough i am talking to scrutineers as i type regarding this. need to rethink my design a little! where can i see your car?

@partypat2528

2 жыл бұрын

@@RuskiWeldFab Are mudflaps an adequate solution?

You’ve officially gone composite crazy mate! Another great watch and the bumper looks mean with the integrated rain light. Much better shape than the one you first cut and carbon Kevlar is 👌🏻

@RuskiWeldFab

3 жыл бұрын

double post? oh well ill reply anyways haha. yes gone mad... but you seen nothing yet haha

@andylaunchbury8539

3 жыл бұрын

@@RuskiWeldFab Oops sorry mate. Didn’t think it sent the first time. Doh!

@RuskiWeldFab

3 жыл бұрын

nah nah its all good! more the better lol

Loving the carbon work...Will you be making a carbon flat floor? Go on...you know it would make an epic video!

@RuskiWeldFab

3 жыл бұрын

Eventually maybe. not at this stage.

Ruskiweldplasticandlaminateshit! Mint job as always! Love it

@RuskiWeldFab

3 жыл бұрын

Thank you! Love the new hash tag haha

nice

@RuskiWeldFab

2 жыл бұрын

Thanks

Great comes out , man! you can also make something on the sides of the bumper in the form of ante wing. Hello from Ukraine!😎👍

@RuskiWeldFab

3 жыл бұрын

great idea! можно по русски кстати 😉

@sk_garagelife2411

3 жыл бұрын

@@RuskiWeldFab Спасибо! Я понял, суппер😁👍

Amazing work as always 🙌🏼 When will you be doing the roof 😬👍🏼😂

@RuskiWeldFab

3 жыл бұрын

thank you! soon very soon. just need the weather to warm up a bit. resin wont set below 15 deg.

Nice 😎😎 I do love working with composites , when’s the diffuser vid out ?

@RuskiWeldFab

3 жыл бұрын

Most likely next Sunday or Sunday after next.

Love the content man. Can you tell us what weight cloth the layers you used are?

@RuskiWeldFab

11 ай бұрын

usualy 200g visual layer and bulk up with 400g

I loved the video, first one I have seen cutting epoxied kevlar. What trim wheel did you use for that?

@RuskiWeldFab

2 жыл бұрын

Just a very thin 0.8mm cut off wheel on angle grinder.

Man I hate the KZread Premier shit, just wanna watch the video 😂

@RuskiWeldFab

3 жыл бұрын

I know I am sorry! But it’s such a great way to talk to you guys! I haven’t seen it myself hahah so just as exited 🙃

Not bad! You are making it very light... You'll need much aero though 😂🤙🏻

@RuskiWeldFab

3 жыл бұрын

Haha oh I will have all of it 😂

@marinoporopat

3 жыл бұрын

@@RuskiWeldFab Be sure to add a little bit extra on top of that 🤣💪🏻

@RuskiWeldFab

3 жыл бұрын

Haha will have plenty lol

Did you use carbon fiber sheet as first layer and then fiberglass for second and Kevlar for third ? How many layers did you use ? I wanna do my bumper like this too. So sick

@RuskiWeldFab

Жыл бұрын

Yep! That’s exactly what I used!

So you used pva glue as release agent how hard was it remove

@RuskiWeldFab

2 жыл бұрын

No it’s not PVA glue. It’s a release agent that’s called PVA. Totally different thing. Don’t use PVA glue.

If I start replacing rust with carbon fiber on my car, soon I'll have a full carbon car!

@RuskiWeldFab

3 жыл бұрын

😂😂😂😂 mine has near no rust

@Dubst3pT3ch

3 жыл бұрын

@@RuskiWeldFab I'm a Canadian. New cars come factory with rust.

@RuskiWeldFab

3 жыл бұрын

😂😂

Каркас не вытаскивал чтоли?

@RuskiWeldFab

Жыл бұрын

Вытаскивал конечно 👍

I think i would have brought a Atom and modified that instead.

@RuskiWeldFab

3 жыл бұрын

Yeah but this is faster 🤪

@helicopter269

3 жыл бұрын

@@RuskiWeldFab are you sure?

@RuskiWeldFab

3 жыл бұрын

Only one way to find out

@helicopter269

3 жыл бұрын

@@RuskiWeldFab I ll look forward to it on the next private day at Blyton

@RuskiWeldFab

3 жыл бұрын

Cool I’ll get a list of excuses ready than 😂

говорят,что есть акцент?))))

@RuskiWeldFab

2 жыл бұрын

Есть конечно. Его никто и не скрывает

what baffles me is that you haven't gone full carbon fiber on everything smh jk

@RuskiWeldFab

Жыл бұрын

slowly getting there

When driving at speed on a wet road your backtires wil throug up a big spray. People driving behing you willnot be happy

@RuskiWeldFab

2 жыл бұрын

The idea is that not many will be able to stay behind close enough for too long to get any kind of spray 😜

Hope your dog doesnt get carbon splinters in its feet. 😕

@RuskiWeldFab

3 жыл бұрын

he eats them for breakfast haha!

Ahahahah i have in carbon fiber

@RuskiWeldFab

3 жыл бұрын

Uh la la la!! I wanna see!!

You’ve officially gone composite crazy mate! Another great watch and the bumper looks mean with the integrated rain light. Much better shape than the one you first cut and carbon Kevlar is 👌🏻

@RuskiWeldFab

3 жыл бұрын

Thanks buddy! 👍