Alec, there are certain things in life that just aren't done...wearing Stihl suspenders while using a Husqvarna chainsaw is one of them. Otherwise, great video!

@ddervish2

2 жыл бұрын

Ach, I use Stihl, echo and Husky saws whilst wearing Stihl or Arbotec trousers etc. In the woods felling or as a chainsaw carver. All my saws seem to get on together :)

@dougsaunders8109

2 жыл бұрын

Point of order….. braces not suspenders, he is in the U.K. at the mow 😁

@Earthenfist

2 жыл бұрын

I mean, everything should be Stihl with him!

@phillipbainbridge9107

2 жыл бұрын

We all know the new Stihls suck, but it takes a real moron to avoid buying a roll of replacement chain rather than the whole saw.

@Christopher-cd3pc

2 жыл бұрын

Good call. I was searching the comments for that

I've watched enough GreenBeetle to know that trying to get irregular items to forge properly is super tough. Well done sir. Now make a chainsaw out of axes!

@Kareem_Benjamn.

2 жыл бұрын

@@malikmalchan2525 nothing is impossible

@Veklim

2 жыл бұрын

damnit, beat me to it!

@kylel8605

2 жыл бұрын

Would a chained saw out of axes be acceptable

@onefastgmc

2 жыл бұрын

Hear me out.. what if a guy could fasten axe heads to a log chain to act as the teeth of the chain saw, and then build a giant bar system and attach the end to a large engine with some kind of clutch engagement system... Wouldn't necessarily be able to run at high rpm, but it would be cool to see!

@laral094

2 жыл бұрын

Even if a chainsaw is not possible, a chain should be. Not a chainsaw chain but a regular chain.

The chainsaw Damascus has a really cool pattern. Almost like camo print or something.

@tdteliteboy8991

Жыл бұрын

I feel like when he had the chainsaw its like an American when they get a nee gun

@lukanovkovic6981

Жыл бұрын

Camo axe: -dmg:23 -speed per swing:16 -health bonus:+17% -stealth bonus:+78%

Never thought I'd say this but Jamie you're an absolute madman, you've actually made forging montages sexy

@GlorifiedGremlin

Жыл бұрын

That credit goes to his editor, unless he edits his own videos

You know, I can see why he wasn't allowed to buy a chainsaw until now.

@jonasbonjean

2 жыл бұрын

we're lucky power hammers aren't man portable

@ehsnils

2 жыл бұрын

@@jonasbonjean Well, that's a challenge to take on.

@VTRAddict

2 жыл бұрын

@@jonasbonjean ask Will about transporting power hammers manually...

@jonasbonjean

2 жыл бұрын

@@VTRAddict too soon

@nikolasgutowski5551

2 жыл бұрын

Was he actually given permission to do so? Or did he do it on the sly? 😁

The arborists would actually be your best source of chain, they'd likely have plenty of worn they could give you.

@Sanguifier

2 жыл бұрын

I can verify this. Bonus; ask us for used chipper blades. Excellent source of quality steel.

@HaasGrotesk

2 жыл бұрын

I actually think most of them sharpen their chains instead of just buying new.

@kalicom2937

2 жыл бұрын

@@HaasGrotesk Until they are worn out and cannot be sharpened anymore

@zzzires5045

2 жыл бұрын

Issue would be more stretched chains. A good chain isn't so cheap but easy to resharpen.

@kalicom2937

2 жыл бұрын

@@zzzires5045 and you can't remove links? Seem to recollect that is what my father did

Nice job you've done here! I'm a carpenter and I wanted to tell you that the wood that you choose for the handle is not good. In fact, for tool, we use 90% of the time: Ash. Because Ash is strong and flexible. This wood can last longer and, most important, damage less your hands in the long run. The chock that your hands are enduring are quite horrible at the age of 40-50 and more. It could damage your carpal tunnel in your wrist and cause a lot of pain. Next time, choose Ash! 😉 I really appreciate your videos. The work you are doing is amazing and your videos are stunning! I follow you for about 6 years now and I always love seeing those new videos coming!

"There is a shortage of chainsaw blades, np ill buy every blade I can find and melt em down" // Alec the good samaritan

@ENDERLICOT

2 жыл бұрын

I think that was the joke. It's cause he bought every blade that there's a shortage

@bobbertbobby3975

2 жыл бұрын

I do believe the joke was that there was a shortage BECAUSE he had bought all the chains the city had. But i can understand the mistake.

@am-dh9lv

2 жыл бұрын

@@bobbertbobby3975 I think the joke was actually just.. he brought all the chainsaw blades even though there’s a shortage

@wacho4xj

2 жыл бұрын

I'm trying hard not to be triggered that you called it a chain saw blade.

2 days In a row?! What a treat, it seems like Christmas came early!

@TIAGOCSful

2 жыл бұрын

That's what she said

@DaniloAllen

2 жыл бұрын

Christmas monetisation has arrived 😂😂

@jacemcknight6666

2 жыл бұрын

Ikr

@alifesh

2 жыл бұрын

Yeah, I am worried... wth is going on?

@Hooivork

2 жыл бұрын

Alec Steele Advent. One video every day until Christmas

A scythe made from lawnmower blades perhaps? to keep the theme rolling 🤣 I’m pretty sure most lawn mower blades are high carbon, between 1040 and 1080, so should be a okay steel?

@heckinscrub2252

2 жыл бұрын

Make a hammer from hammer heads😏

@TomOConnor-BlobOpera

2 жыл бұрын

One of the projects I've been putting off for a while is to make a draw knife out of an old lawn mower blade, actually. First I need to build a forge... And buy an anvil....

@k.3004

2 жыл бұрын

Make a Nordic/UK/American pattern scythe one with bevel edge can cut thicker brush

@jackmcnelly774

2 жыл бұрын

@@BloopTube some are, some aren’t I heard, depending on who makes it, my ride on John deer uses a high carbon nickel alloy which is hardenable. Even if I’m wrong he could do a san mai style blade with a insert. Tbh I just wanna see a scythe out of lawnmower parts lol

@colesutra

2 жыл бұрын

@@heckinscrub2252 A hammer made out of nails!

The editing of these videos just keeps getting more insane! The power hammer matching the beat, the scale popping off as the beat goes, same with the milling. That’s just next level stuff honestly.

@justinbrown1451

Жыл бұрын

I came to leave this comment

The Damascus Axe wins against the chainsaw overall. Great forge work, Alec.

Not a significant challenge but for a long time I've been wanting to see Alec make chisels, a draw knife, a spokeshave, and a couple plane irons for woodworking...as gifts to his father.

@CorwynGC

2 жыл бұрын

He should definitely make a draw knife for himself, so he can make axe handles without using a grinder. Much better handles.

@C4sp3r123

2 жыл бұрын

Would make a great Christmas gift to give him

@jeremymcclanahan2389

2 жыл бұрын

Wow....I did not read your comment before I posted....100% whatI would like to see too!

@TheOpendesign

2 жыл бұрын

Absolutely this..

@dougoliver2342

2 жыл бұрын

Didn’t he make a Damascus chisel for the Samurai Carpenter or am I thinking of someone else? I’m too old to be sure.

Going along this theme you should make a Damascus anvil out of hammers

@markfergerson2145

2 жыл бұрын

Ooooohhhhh.... Yes indeedy!

@Thelurpy1

2 жыл бұрын

Agreed!

@jesseking4815

2 жыл бұрын

Right after you make the Damascus hammer out of nails

@dawsontaylor5864

2 жыл бұрын

Make a bunch ot damascus hammers from nails, then make a damascus anvil from a bunch of damascus hammers.

@VTRAddict

2 жыл бұрын

@@jesseking4815 he already had done a hammer from nails.

The naked chain had a bit more to look at, but the cannister, with its clean lines and uniformity? Just perfection

Guys like you that started me down the road. Keep it up, I had no idea what it meant to be passionate about something other than a person until i found the feeling of hammer on steel. The peace, purpose, and drive it has given me has been a revolutionary force in my life. Ive never studied harder, worked harder, or failed as often. I've loved every minute of it. Thank you.

I love the laid back and chilled vibe Alec and Jamie have these days... As well as the jokes☺️

@Johndouglasphillips

2 жыл бұрын

Agreed! and F that Peter guy! He can bugger off 😂

@miclowgunman1987

2 жыл бұрын

he's starting to get a bit of that Colin Furze nuttiness in there and, I don't hate it.

@hotdog99100

2 жыл бұрын

So much less than the work in Montana with Will.

@schoenbaum

2 жыл бұрын

@@miclowgunman1987 when he left the uk.. furze came and dug though his trash... now that alec is back... where is the the furze steele calab?

@lostmypicks

2 жыл бұрын

This is what happens when a man starts getting... well having good times with the lady.. lol. He's all grown up

The axe won hands down. I’d really like to see some Damascus cuff links with some gem inlays. I wanna see some Steele bling! Cheers!

@nedben1602

2 жыл бұрын

That'd be cool

@keithbidwell7070

2 жыл бұрын

Seconded. Cuff links would be amazing.

@hutchinson69

2 жыл бұрын

You'd struggle to chop a piece of wood with cufflinks

@MrGoesBoom

2 жыл бұрын

@@hutchinson69 use diamonds for the inlay? Might help

The axe wins of course. Really great to see you make a simple beautiful quality tool again.

0:52 The stihl straps and the husqvarna chainsaw combo is probably one of the most cursed things I've seen

It would be great to see you make fancy wrought iron gates for the new house. You could brake the all time record for the most episodes for one project lol

@lucd5766

2 жыл бұрын

that would be very good indeed 👍

How long has it been since you hand forged Damascus? It would be nice to see you do that again. Power hammer is great. But hand forging has it's own appeal.

@dryaldibread2327

2 жыл бұрын

You just wanna see him sweat

@TreeCutterDoug

2 жыл бұрын

*We, want to see him sweat.

@jacklougheed4561

2 жыл бұрын

Even just another hand tools only series would be epic.

@Vyyy290

2 жыл бұрын

@@dryaldibread2327 i want to see the amount of technique he has but yeah maybe a bit-

Hey Alec, a few years ago you made this beautiful broken back seax. What about a nice scandinavian typ seax with a 3 layer blade? A middle layer of historical steel and outer layers of damascus. On top an authentic sheath would be nice as well. 😁

Love the pattern on that axe! The different metals poking through really give it a "3D" effect.

Pro tip, the colored links on a chainsaw chain ARE normal links. They're color coded to help identify the type of chain. Typically green for "anti-kickback" and yellow or gold/bronze for regular chain. Also you made an alloy of high carbon steel from the teeth, chrome from the plating on the teeth, and mild carbon steel from the drivers.

@orans_

9 ай бұрын

Also helps while sharpening for a start and end point

@alfonsedente9679

9 ай бұрын

Pro tip, the colored links are NOT the same as the rest. The coating, plating, enamel on the odd link, if trapped just below the surface of the majority of the links, will cause a delamination from the rest.

I'd like to see more of the projects that take Alec well out of his comfort zone... or more of the revisiting projects from the past & see how much better it can be this time around...

@krazedlunatick

2 жыл бұрын

This is a great idea

Alec, you should try making a credit card knife. A knife that is folded into a credit card shape and can fit easily in your wallet. I think that'd be really interesting to watch. Love your content!

One of the coolest looking Damascus patterns. Well done

That Damascus is so gorgeous! Looks like the skin on a silver birch tree

I feel like you and Jaime are having so much more fun in the videos these days. It makes them so enjoyable to watch

That axe is beautiful! Probably my favorite out of everything you have made.

The wonderful irony of forging an axe out of what is essentially a fully automatic axe... I love it

The chain etching is so cool it looks like it's wood grain or maybe even like camo.

@daniel_charms

2 жыл бұрын

Looks like a piece of iron with the souls of dead chainsaw chains trapped inside.

Alec, seeing you go through the process of making something is also very pleasing and entertaining. Even though we alredy saw someting similar. Its like good music, you enjoy listening to it again from time to time. My point is, no need to rush through the forging process. The quality of your videos is very good. I would very much like a few more minutes relaxing while seeing hot metal bend by force and technique, and listening to a quite good soudtrack. Congrats and keep up the amazing work.

@longlowdog

2 жыл бұрын

KZread creators know we the viewers have loads of subscriptions and if their videos are too long we just watch shorter ones and miss out the really long ones. It's a challenge to get the interest of the viewer without monopolising their viewing opportunities.

I think it’s finally time the world saw a Damascus steel fish slice, we have been waiting and we are ready

This and the Pulaski are some of my favorite things you have made. Great stuff.

You forgot the “which one can be thrown better” test 🤣 would love to see you forge the idol from Indiana Jones 👍

I like how you had to spend hundreds of dollars on a chainsaw just to get the chain. Well done.

@Grunttamer

2 жыл бұрын

Because he used it in the video he can probably deduct from his taxes

@rmwilliams88

2 жыл бұрын

@@Grunttamer you’re probably right.

@Jrakula10

2 жыл бұрын

@@Grunttamer he just so happened to have to cut some trees down on his new property....

@Maltinis

2 жыл бұрын

Or maybe making this video was only an excuse to buy a chainsaw.

@sjv6598

2 жыл бұрын

The 135 is only a couple hundred quid 🙂

Again, Eeee, well done again, it's a great honor for me to see another person with precise attention to detail and his wonderful work, well done and respect from old BG. p.s. You are the best artist to metal........!!!!

Love the video as always Alec. However as a fellow Smith I issue you a challenge!!! Make a minimum of a 15cm long pattern welded knife WITHOUT any of your shop equipment, essentially a knife making challenge using only tools and equipment available to a beginner who has a very limited budget Rules and parameters: no welders, no power tools beyond a cheap belt sander (I say this because there is a HUGE difference between a shop belt grinder and a cheap harbor freight 1" belt sander) no propane forge, hand made charcoal/coal forge using stuff available at the store/hardware store (kitty litter, sand and maybe a cement) absolutely NO power hammers, all hand forging. Basic materials such as high nickel steel and high carbon steel (heck if you want to go farther use old band saw blades for the nickel steel) you can use borax for Flux or anything easily available that isn't professional grade Flux, must have at least 5 folds to get a higher layer count, no limit on the layers but again you'll probably limit the starting layers since you won't be able to weld them prior to forging. Etching recipe that can be made at home from home acids, no professional etch solutions. Oh and for the airflow, can use what ever you want for that since something as simple as a hair dryer works perfectly, no need to limit yourself on that. So what say you? Oh also I'm going to say you have a limited metal budget, say at most 1 meter long bars of each metal and say .317cm thick? Or the metric equivalent of a quarter inch. To limit you on how much stock removal you do, remember this is a challenege to force you to use what the average young beginner has access to

@fedorkraev9341

2 жыл бұрын

I don't know if you've seen the series he made like 3-ish years back of making a knife using hand tools only. That's basically what you described minus a few things. Seems really close to what you just proposed.

@thejackofalldans786

2 жыл бұрын

@@fedorkraev9341 I think i may actually recall that video, but I also remember there was something about it that didn't sit right, as well as the bloomery one they did which there was a lot wrong they did with that one that just made it so much harder on them. do you remember the name of the video? Ok so It's his back to basics video, so kinda what i had in mind.

I'll be sad when Alec goes back to the US, his UK ones with Jamie are infinitely better.

@sjv6598

2 жыл бұрын

I agree entirely! It’ll be a sad day when he leaves us again 😢

@christopherdoffsotta1276

2 жыл бұрын

@@sjv6598 JAMIE SHOULD GO WITH HIM ...

@sjv6598

2 жыл бұрын

@@christopherdoffsotta1276 I wish! That’s make great content, they work so well together.

Alec: gonna make chainsaw Damascus... Shurap: Hold my beer...

@jbkhan1135

2 жыл бұрын

Love that channel!

@craigk.gowens7534

2 жыл бұрын

You misspelt tea.

@xxxdiresaintxxx

2 жыл бұрын

@@craigk.gowens7534 I was about to comment about Tea instead!

It´s always a treat to see Alec goofing around and having all the fun a simple man can have. ^__^

You are on of my favorite Makers on KZread! The production quality is outstanding and you are extremely talented and fun to watch. Keep up the great work! Also would be fun to see how well you would do on Forged & Fire!

Actually when Shurap does this, he soaks the chain in kerosene before forging. I guess it makes the chance of oxidation a lot lower by burning it off in the forge....

@DJTheMetalheadMercenary

2 жыл бұрын

I freaking love Shurap, the man is a wizard.

I absolutely love the shirt "It's not stupid, if it works". That said, seeing you try to forge all that chain together... yeah, I've seen enough Forged In Fire episodes to know that will never work outside of a canister 😂🤣🤣

@Sebastian-ed5kt

2 жыл бұрын

Then watch the one (s2e4 i think) where ilya from that works participate

@Mike__B

2 жыл бұрын

@@Sebastian-ed5kt Took a look at that episode, there seems to be a lot of jumping around, his huge ball of saw blade wrapped craziness, then the next time we see it there's flatness and he makes sparks with water, then the next time we see "poof" there's a perfectly shaped blade. Although there were a number of faults with it so not not sure I'd call it "working"

I am 100% convinced that all these subtle "Dad Jokes" in the last few videos are hints that there is a Junior Steele in the future...

I love that ive watched alec go from a little mild mannered boy in a shed to this man who got married, owns a house and even starting to censor his videos! Love it!

I’m always elated to see a new Alec Steele video populate in my feed. Especially these new interesting builds he is doing. I love this new “let’s have a blast forging whatever the heck I want” attitude and these short builds. But, that being said, I desperately miss the days of long builds like the Viking sword or Sabre you made with Will in Montana. Are you ever going to do another huge build like that anytime soon? And even if not, I’m such a die hard Alec Steele fan, I’ll still watch all the videos you put out. So to end my long diatribe here, thanks for the “infotainment” and for just being one of the best, if not THE best channel on KZread. Be safe and have a wonderful holiday season with your family and friends.

Hell Yeah!! always love when Alec makes Damascus Turned out beautifully!! Great job Alec I really like the pattern it created!!

You are such an inspiration to me in the forging sense, I don’t have anything at home since well if im gonna do forging at home im going all out and it’s expensive to do that, im 16 and in a school where I have a shop im in which is metal fabrication so I basically do a bunch of welding which Im good at but we forge sometimes and we have horrible setups for forging, and well anytime I use it most of my skills come from watching almost all your videos

Recently saw a video where someone made a copper and steel Damascus. It was stunning when done and used a far colder temperature. Was super interesting. Would love to see Alex try some unusual metal combinations.

The damascus came out so cool!!! It looked like a camo pattern, didn't expect that

Holy smokes the stars have aligned. I literally was trying to do this last night.

I was getting ready to come into the comments and say you should have used a Canister Damascus technique with that chain, and then you went ahead and did it. Good man.

Everything about this video, including the adverts, was brilliant. Well done, Sir. No doubt that Ax head is much denser and stronger than most Ax heads on the market just from the amount of hammer forging Alec did to it. Last his and several other's lifetimes.

A really random one but could be something simple but could be taken OTT with Demascus would be a shoe horn. I’ve had metal ones in the past and they bend, the plastic ones eventually snap. So finding the fine line between something that Is thin enough but not flexible would be cool.

@abnormallynormal8823

2 жыл бұрын

You could try actual, you know, horn.

Man, Alec, I’ve been watching your content for years now and have enjoyed watching the channel grow and change with your business and I’ve got to tell you, I like the new humor you’re throwing in there! It’s still fantastic quality as ever, but the goofy little bits you’ve been trying out lately are a win in my book. Keep it up brother and I hope you and yours have some killer holidays!

0:34 At first I thought you just opened it up right there in the store, lol.

This episode is why I watch your channel. Would also love to see a vid from Jamie about filming and editing in that environment.

Hey Alec, I know you've revisited builds in the past so I'm just throwing it out there... how about another katana? Maybe do it as close to traditional forging, with tamahagane.

Nice to see you back to doing what you do best Alec, that’s a gorgeous axe, & I want it...

Alec I would love to see you make some crucible style wootz damascus! I love seeing all your work and you get better and better. Your focus on detail keeps me coming back! Peace, Love and Blessing bro!

Lol 0:53 is when most normal people would start running

Finally back to the type of videos that made this channel great!

I would really like to see you try to make a cast iron pan in your workshop. I know you have cast metal before (nice rings btw) and I would be curious if you could scale it up a notch to make a household utensil. I generally like your approach to new fields of your craft. The initial failure as well as the eventual success.

@Bullshit1011

2 жыл бұрын

There's a cool episode on Antony bordans series on crafts people , where he visits a couple in New York I think that recycle old cast iron brake rotors and they pour real cool pans worth a look

The bit of tasting the metal reminds me of a prank that's quite common in the metal working industry. You simply tell a "green horn" that you can taste the difference in metals and wait to see if the do it. I once saw a man lick two rusty pieces of metal to see what they were.

Whenever I feel sad, I just watch Alec try to forge weld hashbrowns together (4:35 in case you were wondering)

Imagine putting days of work into a project, where you take an advanced tool which does quick work of wood and turning it into something that does the same amount of work in days of time. No but for real I love how it turned out. That damascus pattern remindes me of camouflage. Awesome video!

I'd like to see a concrete drill being made. It's an interesting mix of steel types.

0:33 For just a split second, I really thought he just tore that box open right there before buying it lol

For the original chain billet you should have hammered it flat and folded it like the Japanese did with their steel (for the same reasons they did, because of oxides and porosity).

You know there is a cheap tool for taking chains apart right?

@ThisIsArty

2 жыл бұрын

no he does not

Beautiful! That Damascus pattern reminds me of spalted wood.

5:32 Jamie I'm gonna need more brilliant Trap music edits of forging like this please 👌

Making an axe with a chainsaw chain has to be an amazing insult to progress I love it

awww poor Peter.

@MianCowell

2 жыл бұрын

Peter knows what he did!

You are so amazing

Awww..... I've been making chainsaw chain pattern steel for a while, chainsaw san mai etc... and was seriously hoping we got to see your axe etched to check out the pattern.... I "usually" get the chains (used worn out chains) to stick, by soaking overnight in thinner, then using a LOT of very light blows to bring it down and get the spaces filled before using the press on the billet. Always good videos! Still want to see the pattern of your axe though!

Petition to replace the Yule Log this year with slow motion footage of burning chips shooting about as you mill some steel. Wonderful shots Jamie!

Awesome video Alec! Love seeing what you come up with and get a kick out of your jokes! Axe looks amazing that's for sure, keep doing what you do and enjoy yourself!

'3am' "IT'S FIRM AND CONSOLIDATED" I'll remember that for the right time.

The Axe clearly Won... Id Love a Custom Throwing Axe from You. I habe some Cool axes but Demascus is Pure STYLIN' 🤣🤣🤣

"Oh, I don't care about Peter, he can go **** himself" That just made my day. Hilarious.

I can't believe the dog is listening to you like that ,I was like Woww ❤️😍👏👏👋👍 good work 💪👍👍

I’ve found with chains canister Damascus works the best. Also adding powdered 1095 to that seems to work well.

Such a good spot for a " here's Johnny" but sadly just crazy laughter 😂😂😂

Loved the vid. Definitly one of your better ones. Not that there is anything wrong with the others, but this one is REALLY good. Loved the music, video style and over all (not sure if others agree) but this was entertaining AF. You are epic man!

An axe formed from a chainsaw... that’s the manliest axe I’ve ever heard of

4:50 The forbidden hashbrown

Chainsaw Damascus looks like Camoflauge, you learn something new everyday.

Now forged in the fire is never gonna take you. There are no suprises left for them to test you with. "You must make an axe in your signiture style using... Chainsaw blade damascus!" Alex: been there, done that, got the flag.

Just found your channel from Tom Scott, and when you said Norfolk I couldn't believe it! Fellow lad from Norfolk, love the vids!

The chain billets looked like some kind of forbidden hashbrowns

Thank God! You finally carved a handle that you didn't burn later.

Either that was some incredibly soft wood, or you have friggin' beaver teeth. 😂😂 Love the humor, dude! 👍 (Oh, and great job on the axe.)

That was fun...good on ya for trying to show what goes on inside the can when making canister damascus...great video!

I have to admit, that axe head is one of the prettiest things you've made. It's a shame you crippled it with such a short handle, though! Should've put a long handle on it so you could put some GRUNT into each chop.

Stihl suspenders and a Husky chainsaw, I'm sure someone is out there gnawing a log over that one 😂😂😂

I never would've thought I'd actually see Camouflage Damascus