I got an Arrma Typhon 6S!!! EPIC!!!
Ойын-сауық
This buggy is awesome!! After Seeing Bill beat on his I had to have one and we will be seeing more of it on here for sure!!
I ordered this from Sean Larmond at Jax RC Recycle and Repair his FB group is here
His Larffle Group / 253549585899664
His Sales Group / jaxrcrecycle
Here are links below for this buggy and some possible plans for it for the future
Arrma Typhon 6s
Amain bit.ly/3wGFSWX
Amazon amzn.to/2ULYmbD
Ebay ebay.us/dyK117
Horizon bit.ly/3eQdxHK
Flysky GT5
Amazon amzn.to/3iqsVeO
Ebay ebay.us/HinilG
Reefs Raw500 servo
Amain bit.ly/2TqX44Q
Ebay ebay.us/fdDkd8
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc
Пікірлер: 155
Dude that's some hard bashing. That was really impressive thanks for the great video. That was a great demonstration of how it can hold up.
Vit parts be on there soon. 😂
@ExocagedRC
3 жыл бұрын
not yet!
@loum7008
3 жыл бұрын
@@ExocagedRC not needed.....
20 minutes later : all vitavon parts everywhere
@old-rcplane-phart
3 жыл бұрын
Vehicle now weighing in at 50 pounds, but will never break! 😜😁👍
@ExocagedRC
3 жыл бұрын
lol not yet!!!!
@paulclancy2404
3 жыл бұрын
I have either 17 t or 19t pinion I didn't need the shims exo but you should check the diff fluids and your style you need thicker fluid ,imo
@paulclancy2404
3 жыл бұрын
I have one too, probably the best one because its good base , and the strongest
@PHLike69
3 жыл бұрын
😂😂🤣🤣😂😂👍🏻👍🏻
Famous last words “box stock but maybe I’ll change everything in here” 😂😂😂
Turn up the punch on the esc👍
You won't be disappointed!
Man I wish I could afford one of these. All I can get is a 1/10 rustler and 1/16erevo
One thing you definitely need to do with arrma 6s cars before you even run them is check the diff fluid and shim the diffs if needed. They don't come shimmed well from the factory and sometimes they come with almost no fluid in them. They're usually okay but it's always best to check.
@ExocagedRC
3 жыл бұрын
I've messed with the center diff already but not the axle diffs
@rcjourneys69
2 жыл бұрын
Have you changed punch settings. I put my on 8. Now i need new tires ripped a hole in one of them.
So glad you got a typhon Joe! It’s my battle steed! A cockroach of a car!
Your a nut and I love it LOL. Wish I had you as a neighbor. 👍👍I just bought this same one yesterday. I love my 6s Notorious V5 and my 1/18 teton. But I think this one I will have the most fun with. Thanks for the Vid!
I’ve had a v4 v5. That radio isn’t bad at all on the v5. One if my favorite rc’s.
I can't believe your just getting one brother... this is one of my all time favorite basher.. after a 💩load of M2C upgrades and truggifed of course👍👍
Think I'm gonna pick one of these up in spring. Looks like a pretty tough rig.
This thing RIPS love mine. Just picked up a limitless a week ago too
I love my Typhons!
Go carbon fiber Chassis brother and don't look back , love to see a Arrma 6s in the family. Love my EXB
Love the 6s arrma line up....I have the v5 kraton abouslte beast in 6s
Nice first rip. Yeah powerhobby batteries are solid. I have a a fewer of them, including the 4s 8000mah 120C graphene hardcase one's that I'm trying out on my Outcast 8s and EXB K8S. Working great so far.
I'm super happy with my Typhon purchase
I like everything about your videos bro 😎👍👍👍
Yessssss great to see you got one of these man. Love mine. Although I am curious to see what tires you run on it. I run badlands mx on mine and they hook up great but the factory glue job was bad and then the foams blew out. Wicked video dude.
You are kicking up crazy dust
Upgrades on order 😂👍
Nice AIR 🔥🔥🔥
The SLT3 is actually a really good radio. It's based on the old tactic protocol and works very well
@ExocagedRC
3 жыл бұрын
I gave it a second run soo thats a good thing. Still its coming out for the Flysky GT5
hi mate the spare pistons have different size holes 2-3 and 4 and 4 blank pistons. with the blanks i drill 4 1.5mm holes and perfect with 70 weight shock oil. I'm wanting one of those 👍🤪😜🤣another great video mate
I just got my battery and charger and my Typhon will be here soon :)
I bought a Typhon as a slider from EBay. It is sitting on my work bench waiting for electronics and I've been told to change the diff oil. But no one tells me with what to replace it with. Awesome bash!
@ExocagedRC
3 жыл бұрын
I have a new video in the works, I tried the Traxxas 20m but went with a silicone ear plug in the center, best for bashing but not racing. Probably find the stock oil and double it for more fun on a track. For just track racing the stock oils are fine.
@Houleigan
3 жыл бұрын
@@ExocagedRC I do not race, just bashing
@300WINMAG360
2 жыл бұрын
@@Houleigan The stock fluid is 7k-10k-7k. I bumped mine up to 30k-100k-30k. It definitely puts the power down but is a lot less forgiving when driving. I'm thinking about going a little lighter but I'm gonna run it where I have it for awhile.
@Houleigan
2 жыл бұрын
@@300WINMAG360 Thanks for the input! I have gone with the silicone ear plug in my centre diff
I sure hope you build some huge jumps but with some good down slopes for landings. I've never been a fan of launching to the moon only to go splat on the ground.
@ExocagedRC
3 жыл бұрын
LOL Splatting on the ground hurts, I do plan on a much bigger jump and landing area once I get the Exoplex done.
Nice Joe, the Arrma 1/8 lineup is incredible IMO. Have a Kraton EXB 1/8 I don't understand how it keeps going.
I feel the same way about the spectrum ESC. It's a little soft on power at the beginning It almost "ramps in slightly" . Very stable flyer too. Not great for backflips with stock tires but fun rc.
@ExocagedRC
3 жыл бұрын
Totally agree
Now, we need Bill to land his like you do lol
I almost want one now
I am eyeing the Talion EXB or Kraton EXB 6s. Considering how well that Typhon holds up to hard bashing like that, I am leaning Talion for a little better handling and mid-air control. Nice vid!
@rcright8357
2 жыл бұрын
The typhon needs small bumps and long stretches. Kraton and talion rock anything but heat up faster and go a little slower
That controller is fine I have the same one on my karton
Honestly I think the 3S version with the plastic chassis is more durable. Quite a few folks buy the 3S version and put a 6S power system in them.
@vapeapetn
Жыл бұрын
What I done, castle combo...but, gotta go ALL metal gears. 4S+ on the plastic gears won't run 20min...tried it
nice vid👍👍👍
Those Tamiya cross hex spanner are taking over the hobby I have plastic one alloy one and the rest are pig iron, so having so many I have made a couple of dog whistles and a few bottle openers, the rest have invaded every orifice of my hobby storage almost prolific as ants who have taken over but are keeping their heads down until they develop a weapon to enslave us.
@ExocagedRC
3 жыл бұрын
LOL YEP!!
Do you worry about the temps? Or just run them hard until they shut off and replace when worn out?
Wondering if punch setting would help it wheelie
Recalibrate the esc. It will give you crazy more power. My Mojave was that way
I want one ear plug the diffs put the ride height as high as possible and send it up some huge hills
I urge you to change the diff oil! You will trash your diffs with the factory diff oil there is barely any of it.
@paulclancy2404
3 жыл бұрын
2nd that
@300WINMAG360
2 жыл бұрын
What weight do you use?? I bumped mine up to 30k-100k-30k but it seems a little too much and unforgiving.
@_every_rc_9621
2 жыл бұрын
@@300WINMAG360 I use 100k front | 300k middle | 100k rear
@paulclancy2404
2 жыл бұрын
50k,60k 100k or 200k , 30or 50k
@paulclancy2404
2 жыл бұрын
Small environment yes go lighter
I got used typhon v4 with blx 185 and blx motor its crazy fast (on 6S and high speed gearin)
Nice
I have the typhon 3s ...🤘 i imagine 6s !!! To much !!!
Lmmfao...maaaaybe youll just have it fully upgraded the next vid....leave it stock my ass who can do that...lol...nice video man
No lag at all
Big air pump up looking forward too this Baby 👌👉💯. I have the Kraton 6s v5 running the Powerhobby 6s 5000mah 100c continuous 200 c burst A rock cut the center diff Down I’m looking to upgrade it. Any suggestions
Yeh you have to turn your punch up!
Go into the esc settings and punch level 9 omg 😲
@ExocagedRC
3 жыл бұрын
I will try that
A nice metal spur gear until a small rock gets wedged between the teeth and chassis.
@daver18qc
3 жыл бұрын
Have you actually had that happen? I was weary of that too at first, now 5 years later, still on stock spur and i'm running 100% in a sand pit so small rocks are basically all i drive on.
@ottotarnowske987
3 жыл бұрын
@@daver18qc I did twice. I made a small guard out of thin sheet metal and solved that issue.
Yeah the stock punch setting is at 4 if you go all the way up to 9
@ExocagedRC
2 жыл бұрын
Well, stock esc is toast now. LoL
Will a 6500 6s battery fit in the typhoon with body on
My plan is to leave this box stock but maybe I'll change all the electronics & tyre's. 😉👍
These are cool buggies. I kind of want the tlr tuned version. Nice property as well. Do you have a track?
I got a arrma typhon 6s and made it 8s and it was fast almost 100 mph
Oh yah!!! I put the Typhon on a DX5C with some other Arrmas. Rear skid plate/front bumper, that's it. The Typhon is a tank. I'm sure you will prove it!!!
Got the TLR typhon. Slapped a castle monster x in her. absolute beast on 4s and bat out of hell on 6s (with the ESC tuned to 70% max output)
Trust me get chassis braces and then a fan for motor u run the car all day with speed pinion first love my Arrma tough I was mine off with the hose and spray done a little WD 40
Sir are this use slipper clutch ?
My son and I are going to build our second Typhon. It will be a 6s. What is the best servo, Esc, Transmitter /receiver, motor to get? We want this 1 to be bangin'.
That was an awesome first run Joe. A friend of mine has the 3s Typhoon but that 6s is on a different league. When you said tune the diffs up a bit, what do you have in mind? Keep up the great work mate 👌
@ExocagedRC
3 жыл бұрын
thicker center diff oil, maybe thicker in the axles too, for bashing purposes.
@RuisRcAdventures
3 жыл бұрын
@@ExocagedRC ah yeah cool, still pretty good out of the box but i guess there's always room for improvement. 👌
Punch setting at 3 im pretty sure from factory turn it up to 5. Also Joe try out some Integy Graphene lipos they are 140c
@ExocagedRC
3 жыл бұрын
Integy batteries? I gotta look those up
@jhawk1985
3 жыл бұрын
@@ExocagedRC hey Joe I mistyped earlier today. The lipos i wanted you to check out are Turnigy Rapid lipos. They are some serious power house batts
Gotta bump up that punch setting
Need to tighten them shock springs
If you're running 4s, use the speed pinion. It ain't lame then!!
Will it be vitavon or m2c this time??!
All you'll need is alum chassis braces and 22t pinion gear and go rip it !
💯🤸♂️👍
I don't understand why people buy buggys and bash them. Same as buying a go-kart and going on a motocross track, ain't gonna end well. On a track these things are MENTAL.
@ExocagedRC
3 жыл бұрын
This is a basher than can be raced, the Tekno is a racer that can be bashed, at least thats the way I see it.
@vapeapetn
Жыл бұрын
Buggy Typhon is not by any means meant to be a basher. Like the suspension, small wheels and tires, dude it's should be obvious. KZreadrs wanna think all RC is basher built, they are not.
I love my 6s Typhon it is a good flyer but not good a back flips haha
@ExocagedRC
3 жыл бұрын
yeah needs more tire for backflips
Vitavon on that rig 😆 M2c all day for that rig! Exo if you do upgrades please go M2c. Would love to know your thoughts on M2c beefcake rig 💯
@ExocagedRC
3 жыл бұрын
I've got the M2c on the Outcast 8s and its awesome
Are you going to try the new Vitavon motor mount for the Maxx with the 1717 on 6s?
@ExocagedRC
3 жыл бұрын
yeah I've got that, hopefully I can get to it today or this week.
@keekay_cg32c7.r2
3 жыл бұрын
@@ExocagedRC cool beans can't wait to see I may install one on mine but I would like to see what an 8th scale motor would look like on there I might try a 4050 1700kv TP what do you think?
Default punch setting is very low. Turn it up.
Turn the punch up for a better throttle response
@ExocagedRC
2 жыл бұрын
Yeah it kinda rolls in on power. I gotta mess with it for sure
That buggy should haul ass 😮😅👍
👍
@meirdeaph
9 сағат бұрын
👋🙂👍
Turn the punch up
04:00 Riiiiight :D
@ExocagedRC
3 жыл бұрын
LOL its still stock!!
In about three to four hundred meters range
does the esc have 1 connector or 2
@ExocagedRC
2 жыл бұрын
One for battery and one for receiver
@endosrc
2 жыл бұрын
@@ExocagedRC so i can run a 6s pack without a jumper?
Just keep it stock but replace everything? 🤣🤣😂
@ExocagedRC
2 жыл бұрын
LoL I haven’t replaced anything…..yet
Those tires on that rift on the shelf makes me sick ever time I see them lol I can’t find a set anywhere
@ExocagedRC
3 жыл бұрын
They are hard to find, I think he just got a shipment in but they sold already.
@ashleyconnelley556
3 жыл бұрын
If you ever run across a set get them an I’ll buy them for sure
nxx muscle fan for 30 bucks caant beat em i lost about 30 degrees on average when i installed mine coz when you get in grass those temps will deffo start climbing
I c a m2c chassis coming soon
@ExocagedRC
3 жыл бұрын
LOL very possible!!
Yank up the punch and a bigger pinion, it's a little lame out of the box.
Prediction:The servo will not hold up. 1st thing I've had to replace in every arrma I own. MKS makes a super $100 servo,4 being used with no problems so far.
I would have liked to have actually seen something other than going slow and then blasting over jumps. Please next time can you include more footage of actually driving the car instead of just jumps. Thanks.
It won’t last very long smashing it into the ground like that . Don’t think it’s designed for jumping more for speed . And it’s a heavy car for a 1/8 😎👍🏻🇬🇧
@FarmerFpv
2 жыл бұрын
It's much tougher than all the racing buggies. No issues bashing it at the skate parks. Nothing the right shock oil can't fix. It's designed for bashing not speed.
And to think, the TLR Tuned Typhon may be better than this one😱🤔Jesus it gets high up there.
@ExocagedRC
2 жыл бұрын
I have a buddy that may get the TLR Typhon, I don’t need it myself but if he does he said I can review it.
Hey I just picked up a scx10 iii gladiator! What mods should I do? I was looking at the hobby wind fusion.
Maybe some vitavon 😭
@ExocagedRC
3 жыл бұрын
maybe, I want to keep it stock for as long as possible
@Marcoskicks
3 жыл бұрын
@@ExocagedRC more SBR Vitavon then! Big fan 🤜🏽
First
DOES ANYONE KNOW IF IT IS POSSIBLE TO FIT AND USE A CONNECTOR TO USE TRAXXAS 3s lipos that I use for my e revo vxl?
Wild how far the exoplex came since this video 📹 🏁🪨⚡