Arrma Typhon 6s Upgrades (Wider, MX28 Belted Badlands, Rpm Bumpers)
Ойын-сауық
Kraton Steering blocks, axles, and rear carriers installed on the Typhon. Proline belted MX28 Badlands, and RPM Racing front bumper and rear skid installed. Buggy is look wicked with the V3 body.
Remember to use code "PERRIN" to get $15.00 off when you spend $100 or more at webstore.eliminator-rc.com/ (some restrictions do apply)
Check me out on Instagram - / jasonperrinrc
Use code JasonPerrinRC10 when shopping at methodrc.net/?ref=2Lbl8vKP and you will receive 10% off your order. The channel will also receive a 5% commission.
Пікірлер: 94
That RPM bumper is one of the best things I've put on my Kraton.
Can you drop a link for all the parts needed for this conversion???
@Refer_jack
4 ай бұрын
Fr
@mrtambourineman6107
Ай бұрын
No, look 👀 it up yourself bro, you'll learn more in the long-term. If you don't know what parts they are, you probably shouldn't be installing them on your RC vehicle!
@mrtambourineman6107
Ай бұрын
Also, where does it end if someone is telling you what to do step by step?? You will want him to come round and hold your hand while you install them next!! 😂
@virdi1992
Ай бұрын
You're actually such a loser, dude. Big deal if the dude wants the exact parts....@mrtambourineman6107
The little RPM rear skid plate is a must keep in stock item for all the Arrma vehicles! Thank you for highlighting the fact that so many Arrma parts are interchangeable. Thanks for another great video Jason 👍
Now that looks amazing I love everything you put on that baby
The EXB Talion bumper is a smaller version of the Kraton bumper, suits the Typhon better
@themajorceo
2 ай бұрын
Link???
That's a beauty mate! I have the TLR 6s version, and people might think I'm mad, but I've never ran that on 6s battery power! Even on 4s the thing goes like greased lightning 🌩 TBH I think the typhon 3s is even a bit too fast for me, I use 3s power, but only at 75% throttle. More control = more fun to me 😊
That looks so frickin good. I have a Kraton EXB but always wanted a Typhon. Gonna have to pick one up
New to the hobby. Love that you're doing content like this. Helps us new guys who aren't gear heads. First RC is an outcast 4s v2. Thinking about changing out the stock hubs to HD hubs and this helped a lot. The commentary is on point, was thinking about getting a Typhon 6s for my next car and I think this video may have sealed the deal. Keep up the good content. Every time my bell is lit up I'm hoping it's one of your videos.
@JasonPerrinRCVlogs
Жыл бұрын
☺️ Thank you.
@savagex466-qt1io
Жыл бұрын
@@JasonPerrinRCVlogs What are CBD's ? I know what a dog bone is but I googled it and can not find anything about CBD's
@DeejayPozE
7 ай бұрын
@@savagex466-qt1ioCVD's man. I'm probably way late but thats what they are called!
I think I would enjoy a video of you going through all of your "mess" and organizing it
I put the Kraton front bumper and attempted a triple jump with 6s. The bumper weight endowed and even at full throttle to push the back down, I nose dove and broke many parts, about $130 ish. I like the look you have on that one!
Wow man! I love you workshop. You did such a good job on the video. Your 6s Typhon is really dialed in. Thanks so much for sharing all these great mods. 👍👍
Looks awesome! Still has the buggy look with a lot more presence. 👍 The RPM bumper is a great addition. Perfect for snow bashing. Saved me many times already. I chose not to remove the stock bumper. For the new parts, lemme guess, Canada, snow... You're making a skiing Typhon next 😁
Build came out amazing! You have no idea how many times you had me looking at another Typhon😆 Thanks for the shout out too👍 That tease got me thinking🤔
@JasonPerrinRCVlogs
Жыл бұрын
Thank you. I’m pretty excited about this one. Widening it really changed what the typhon is. Wish I would have done it with my prior Typhon’s. Probably would have not sold them. I’ve been watching eBay for the Corally parts. But I don’t see any ads with the updated parts. Might just have to purchase off Corally’s website, or HRP.
Looks brilliant mate Best thing i did to my v5 typhon was making it truggified !! It just rips and its solid
Love what your doing with your Typhon 🤩🤩
@JasonPerrinRCVlogs
Жыл бұрын
Thanks dude. Super happy with how this is turning out.
Hi, I just bought a Typhon 2 weeks ago. My brother got me infected with rc cars. So much fun to go nuts with it. Just watched your Video. Would you mind posting the P/N‘s you used for the wheel hubs? Like what axle and such… Just to keep myself from buying the wrong stuff twice. 😅
Now for the run video👍. I did something similar to one of my newest builds.
Great video , and left us with a cliffhanger for next week 😂
@JasonPerrinRCVlogs
Жыл бұрын
🤣😂
Awesome Shop! Thanks
Go v5 typhon too, my favorite for sur this buggy is awesome more than everybody can expect
i had so much fun with my typhon truggified today!! upvoted!
Good luck with those belted badlands not coming unglued.
I am really new to the Arrma stuff, very old Fox rc user. Ordering the Typhon tlr, and was wondering if you will furnish me with all the part numbers so I can ordervthe correct parts. Thank you. Wonderful videos.
That thing looks Sweet!!😍
Great video! Really appreciate you sharing your knowledge. Your vids are a little longer than most but packed with tips. Keep up the formst
@mikerainey3847
Жыл бұрын
Sorry bout that! Keep up the format. I look forward to the shorts
I was kind of disappointed with how easily my mx28 non belted came unglued on 4s. You've made me want the Belted ones now though 🤣
@JasonPerrinRCVlogs
Жыл бұрын
Hopefully they hold up. It’ll be a few months before I can really start running them. I still have a few months of winter left.
i have that bumber on myn6s and its awesome. it really protects and i can climb trees now 😁
Is it possible to link the upgraded parts so we can find them easily? Thank you
Hey can you send me a description of the parts witch KRATON also ? Thank u
On 6s they blow off💥. Doesn't matter what glue, who glued it or what you wrapped around the inside and glued. 6s and they explode.
Awesome truggy:) Holy negative camber in the rear - hows tha rear react with all that going on? Love your vids - Cheers from ON
I see that hpi racing sticker
Very cool - thank you for the video ... Can I ask for a link for tires and adapters ? I also can not find the front bumper at RPM ?
Nice 👍, I have the same arrma pit Mat in my shop
What parts do we need exactly to do this upgrade. I’m trying to source them now and I’m having a hard time finding the correct parts. All kraton exb parts? The red hex’s are kraton 17mm so we don’t have to use the adaptors for the prolines since our hex’s are 12mm? The axles I’ve found. Still unsure on the front spindles and rear hubs. Thanks 🙏
Great video could you tell me which kraton hubs you used for your typhon
You definitely aren't the first. I've had this setup for 3 years. And posted on the arrma forums
Which hex adapters did you get just ones that fit any 2.8 tire?
Very nice 🤘
Hello. I followed your build to do mine. But the rear outer cvd are not correct. Too short in the rear. The front worked great. What did you use for the rear outer cvd’s. Please help. Thanks.
Which wheel hubs are you running, narrow or wide 17mm?
Omf my parts make they look organized lol!!! Loving my 3s typhon. Whet paddle tires your running?
That front dogbone should fit on your typhon . the typhon outcast and kraton all have the same front center dogbone
Can you start listing part #s for things you change? Would help a ton
Since widening it. Try the Mojave Dboot fortress tires. Great grip raises it a little, more soft landings and you will never lawn dart as the tires with little effort will pull the front up. I run mine with them some times and had to trim the shirt of the body jus before the rear wheels, enough not to really notice, and I still have fun without widening yet. Check out Rich duperbash Typhon on Dboot fortress tires. Not to many have tried and the ones who have are saying it's a new beast. I'm now doing speed runs with the Typhon.
Do you have the part numbers for the bumpers, and do you know if the bumpers will fit the 3s Typhon? Good video, and I enjoy taking time watching your vids in helping me with my own RC fun.
quick question, why do people struggle so much with tyre ballooning? I've never used belted tyres but I've also never blown out a normal tyre and I do have 6s rigs, outcast included.
Hmmm might be on your way to constructing the ultimate rc car making almost all your others obsolete?
@JasonPerrinRCVlogs
Жыл бұрын
Funny you say that. A part of me wants to sell a some of my cars, and focus more on just a few. The Typhon is going to be a blast.
helpful for dirt track racing?
Definitely looks cleaner without the RPM bumper but I refuse to run mine without one. Has saved me so many times.
@BeautyBeastRC
Жыл бұрын
Definitely agree! I like the kraton non exb bumper as a compromise 🤣
What all is needed to do this conversion?
Could you post the part numbers that I need to do this mod! Thanks really like it,want to upgrade mine!
Hi I am in the process of buying a new Traxxas Sledge. I am not going to use it for any bashing, all I want to do is set up some racing cones down at my local park and race around them. After watching this video I am thinking maybe I am better off just buying a Typoon 6S and put some bigger tyres on as you did. Do you think it would be faster and more race capable, more fun?
DAMNIT MAN!!!! IM TRYING NOT TO SPEND MORE MONEY ON MY TYPHON!!! Now I gotta get the Kraton hubs and Prolines for my Typhon cause that just looks AWESOME!. You suck...Thanks for the vid.... grr. 😁😂👍 I got the bumper from RPM and the Skid plate. They Are nice touches.
@JasonPerrinRCVlogs
Жыл бұрын
No problem. 😜
Can you bash with the typhon with the new better tyres?
Hi, Parts list numbers? As a few have asked I see in the comments section.
I assume those tires would work on my 3s typhon as well cuz i have 17mm hex should just bolt right on i hope ?
@urbanarborist1160
Жыл бұрын
Yes sir they will... 👍
@creditrazer981
7 ай бұрын
They do, what's on mine
Are the Kraton parts from exb or regular 6s? Idk if it'd make a difference 😅 I'm fairly new to this
@cafub2650
10 ай бұрын
Hubs from Kraton 4s
@MrSrtman18
Ай бұрын
@@cafub2650i wonder will,the kraton hubs work on a 3s typhon?
What is the model or item number for the front bumper?
Part number for skid plate and bumper??
Where are all the otjer Typhon vids bro??
Would it be cheaper to buy all the parts for a rc from Jenny's rc and build it myself? 🤔
@cafub2650
Жыл бұрын
Nope
@JustKeepLivingFPV
Жыл бұрын
@Cafu B needed this 3 weeks ago lol the trucks built. It was a blast. I have put direct hopups on. Spent a ton of money.
@cafub2650
Жыл бұрын
@@JustKeepLivingFPV lol Sorry about that.
@kennetcastillo7740
Жыл бұрын
if you add up the cost you quickly realize it's cheaper to just buy a new rtr
where to get the wil
Would have been nice to have a parts list in the description.
A Jenny’s team corally 6s combo?
Nice build, I want to add a bumper to my Typhon 6s,that background music is pure torture on the ears, way too much of it over and over again. I hit the mute button but then miss when you start talking. Perhaps change out the background music/noise every now and then so its not so annoying, boom click boom click over and over.
Not the music dude come on talk its cool brother good job peace dude have fun
You think your "Parts" are a mess...I have 4 huge bins full of parts, 1 per RC. Im horrible about hording up what I call Heavy Wear Items. Like its bad, really bad.
You talk a little to much, i get it if your actually working on something but you just sit there and talk, ehh sry not for me
Build talk while build its not that hard