The 1 current dislike is the oven rack that had to hold the hitch. 😂 Great video as alway Ryan!! I can not wait to see this truck finished! Keep it up!

@bertjebever

4 жыл бұрын

That 1 dislike is his wife that wanted to cook a nice dinner in the oven a week after and realised it tastes like paint....

You always know when someone is great at what they do, when they make what they're doing look so easy. Top job bloke. This is the best video I've seen on home powder coating...... thanks for the effort

Love you’re content man! Truck has turned out amazing with all the work YOU did. Good job

Awesome stuff right there man. Those parts really do look incredible! Thanks for sharing your progress. It's a lot of fun to watch the parts take on a whole new look.

Great job, turcks looking awesome. Missing out on sema this year..... As a power coating business I got to say you did a great job!

90k Subs 👍 Congratulations ! Dude, all the parts look awesome ! Thanks for the inspiration. I have put together an order for everything I need to powder coat, including a blast cabinet so I don't have to send parts out for sandblasting 😁

CONGRATS ON 90K SUBS BRO! You’ve earned it!

@ryan2546

4 жыл бұрын

I appreciate it! Thank you!!

Absolutely AWESOME video! Very impressive. Thank you for sharing your journey with us! Be safe

These past few videos have pushed me to powder some pieces I’ve wanted done! It’s kick ass and I can’t wait to see it all put on the truck

Been following for a while, I love what you do and you deserve everyone one of them subscribers. Can't wait to see ware you go with this channel as it gets bigger too(:

I love the videos man. You are an inspiration to me and I hope to have my dream truck and car as soon as I’m settled down out of college. Keep up the great vids!!!

@ryan2546

4 жыл бұрын

You’ll get it Cody!!

Cannot wait to see it all put on the truck!!! 😍😍

hey buddy quick tip, i worked in a powder coating shop for a few years and what we did to some of these really tight intricate parts was to pre heat them in the oven until they reached just under baking temp example: if your powder cures at 350 then pre heat part to 150-175 then begin the coat, it will stick instantly and in most cases we didn't need to have it hooked up to current for this to happen on rims or gate work with small openings ect ect. hope this helps if you end up seeing this :) if you have any questions PM me ill be happy to help.

Amazing progress, it looks beautiful

Excellent job. Looks amazing!

I'm OG subscriber and I like how he does a lot things to his truck by himself

@dkhinson577

4 жыл бұрын

Couldn't say the same better

I've got the 12" Gen-Y drop hitch and it's heavy as hell. I can only imagine how heavy that 18" one was, especially having to carry it attached to an oven rack like you did... MUCH RESPECT!!!

Your setup is nice! Finish looks great! Good job!

Great video man I’m doing some research to tackle my first powder coating attempt on some old rims for my caravan and this was a massive help to me

The parts look awesome man. Great job.

13:30 just shows his true happiness and love for the shit he does🤘🏻 Love the videos bro👍🏻

Very rewarding knowing that you did it !!👍

Amazing!!! Awesome work!

Nice work bro, I can’t wait to give this a try!

Awesome job those parts looking badass 😬👍🏻

_LMAO Ryan that was actually brilliant dude_

Great job bro! Parts turned out great

Looking good. I will be doing alot of powder coating this winter

Looking sick man. Keep it up. So close

God bless ya bud. You turn your own wrenches. Been watching you sense it was stock was super happy for you than and am now to see ya dreams come true. Making it to sema. Heck even if just enter into a local car show. Bet you would kill it. Love the channel.

It all turned out freaking awesome man

Friggin sweet man!!! Nice job!!!

Looks great Ryan, now I want to start taking parts off my truck and powder coat 😆

Looks amazing, nice job and thank you for showing us scared ass that anything can be done

Parts look amazing looking forward to seeing them on the truck 💪👍🤤🤤🤤

Dude I have learned so much about powder coating at home watching you. Thanks

@ryan2546

4 жыл бұрын

That’s my goal!! I appreciate it!

@adriantrain2037

4 жыл бұрын

It's by far the best home powder coating vid I've seen yet. You know he's good because he made it all look so easy....... I'm in awe of the color he got. And how it's a silver color be4 the clear......... very interesting. Right-o I'm off to build an oven that will fit my car...... 🤘🤘🤘🤘🤘🤘🤘😜😜😜😜😜😜👍👍👍👍

@adriantrain2037

4 жыл бұрын

@@ryan2546 top job mate..... thanks for taking the time to film the process for us...... stumbled onto your channel, boom SUBSCRIBED...

Very nice...you’re putting in work bro💯😎

Seriously you are crushing it!!

I use a black & decker convectional oven for small parts like door handles, mtb parts and everything looks even and somewhat professional, when the powder coats the surface turn the heat down a bit.

First time viewer, i love the project and wish you continued success @ SEMA.

Thanks for sharing this video I have a plum crazy purple dodge challenger a I have been waiting to poder coat some of my parts and now I going to try it with a little bit of a twist I'm going to see if I can use my hydrographic skills and the purple powder l maybe put it on my channel thanks for sharing this video you got me stoked to do this

Kick ass dude, great insight on powder coating, something I’ve always wanted to do! If you can in your next video put links to the powder and powder coating machine. Thanks for the great content...

@EcoMouseChannel

4 жыл бұрын

Eastwood powder coat kit. Super cheap, super simple. The hardest part is part prep.

@tyler238

4 жыл бұрын

Eco Mouse what do you have to do to prep? Sand like u are going to paint it?

Great Job Ryan, been here since about 20,000 subs! Keep up the great work buddy and if you don’t mind can you post the links to the powder and gun used in these videos and accessories from Home Depot!

thumbs up! thank you Ryan!

Don't have too many young guns out here is So Cali that know a Phillip's from a Slotted. Pretty joyful watching you do this on your own, at home.

Can’t wait to see it all on truck!!!

Dude you got so lucky with the size of that hitch. Perfect fit in the oven

Great work bro. I have a 2010 Ram 2500 manual. You are representing.

Can't wait to see the truck completed

Found this video because im doing my engine illusion purple. Ended up subscribing, good content.

Nice content man i just got my blaster cabinet from Eastwood gonna star powder coating at home I just subscribed

Been using that Eastwood gun for years. If you drive a ground rod in the ground and run a wire from that to your makeshift rack the powder will attract much better than only using the little ground clip from the gun

From sellin the 5.9, buyin the wagon, to power coating you're own truck parts. Keep the vids comming!

That color is so damn beautiful good work bro

Looks awesome love it!

@ryan2546

4 жыл бұрын

Thank you!

Hey man quick question... What did you use in the oven -Broil or Baking option? -How height is the heat? - How many minutes stayed in the big oven . -how many coat of powder normally for auto parts Thanks for advance reply

90k subs congratulations

You killed it brother!

Looks great!

Thanks for the great videos.. love the speech about how people should spend there money lol I'm the same way as I drive a new vehicle every year. Right now a got a 2018 ram 3500 and a 2018 silverado and don't make anymore than the people around me .. your videos are amazing man love the work

Came out great

The Elway jersey hangin on the back wall.

Damn that’s a killer turnout on the powder! Nice job man

Looks awesome

your diy game is god level

Hey Ryan, I have a 2016 ram that I am building. I want to install my own lift kit. It will not be as high as your semi truck. However i want to install a 3 inch lift in the front and a 2 inch lift in the back to level it out. Do you suggest I’d do it on my own ?

Still putting in your own work. Much better than paying someone else in the long run💪🏻

Anyone else count how many times he said ughhhh carrying the hitch?? 😂 all jokes aside great content as always. Thats what separates the small, do it yourself builders from the pay a shop to do it for them builders. It's pretty safe to say your probably one of the only ones powder coating parts in your basement for Sema build. I love it.

@ryan2546

4 жыл бұрын

Bruhhhh that hitch weights so much I’m not some body builder but I’m sure and hell not that weak 😂😂😂😂😂 it’s damn heavy! And thanks man I really appreciate the kind words!

Ryan! Custom shift knob powdercoated purple!

298th view. This is outstanding I can’t wait to see the whole journey to SEMA. 💯

Love the channel love the shirt! Where is it from?

Hey man just a tip, always hit the corners first. As the charge builds its harder to work the paint into the tight areas. Looks great!

@Ryan Mayer what brand powder did you use? How is the powder coat holding up 6 months later?

Sounds like you're in love with the hitch

That’s it. I’m ordering a powder coating kit from Eastwood 😂😂 Congrats on 90k!!

@nikki5ive3hree38

3 жыл бұрын

Eastwood is being really weird I’ve tried ordering this and it keeps saying they aren’t accepting debit cards because of the amount of scams

@Scott46Lee

3 жыл бұрын

@@nikki5ive3hree38 hmmm that’s really odd! I ended up finding mine on FB marketplace. But I do have a couple videos of using it on my channel if you would like to check it out! I plan to do some more powdercoating soon, as well as trying to hit the 1,000 subscriber mark!

Man boss you have a beautiful home for a young man !!

@harryl8234

4 жыл бұрын

That's right, a young single man.

Welcome "backor" to the channel lmao gets me everytime I cant tell what you say at the intro. Still love the channel though

@sloNGrimey

4 жыл бұрын

"Welcome back, or to the channel"

have you noticed or not if there is any bad points of using the home oven to bake the parts in? i'm very interested doing this sort of thing to my car. is there any prep to the metal parts being powder coated?

This makes me want to buy all the stuff I need to start ripping parts off my duramax so I can powder coat random things

Just subscribed bro! What powder coating machine did you buy?

I have a 97 f250 ext cab that’s white and I don’t know what color I want to powder coat suspension parts any suggestions on what color would look cool with white ?

At least you’re doing what you love.

@ryan2546

4 жыл бұрын

💯💯💯

Grinding. And Shinning. ....WHOOO. .....

How long you bake the items for .? And did you preheat the items first .? Lmk I am about to start man .!!! Good work btw .!!!

I've been looking @ powder coating my own stuff the nearest shop is 2hours away and they did a bad job on my suspension parts what temp did you cook @ and would you do a super chrome under illusion money green

Like I said in the last video brother. When doing 2 stage powders it's best to shoot the 2nd fresh out of the first stage cure. So that's a good thing, especially something like your hitch you want optimal fusion.

@ryan2546

4 жыл бұрын

The spare tire delete kit wasn’t trying to play nice when cooled, I’ll have to shoot them all fresh out next time!

Awesome 👍

winter forever!!!!

i have the same powder kit and have used it for years your parts came out pretty good keep that powder dry lol

Could you send me a link to where you got the powder coater in a powder coating really enjoy the episode

Keep it going bro 👍🏽🙅🏽‍♂️💯💯💯💯

Are you gonna have the road armor bumpers powdered illusion purple or paint matched to the truck

So with having it lifted how'd you go about having the speedometer calibrated?

Subbed soon as i seen your back wall wit jersey

That's so sweet

Sweet!!!

looks sick and i bet you saved some coin too

I see that Miami cola....can't wait to try it out

Do you want to send a link to the powders you use? Both the purple and the clear powder .. They are awesome looking!

Like your videos and I’m a huge Ohio state fan! Go Bucks! Just curious how you got all of those jerseys? Definitely jealous