Bought a donut! Hit my office chair...coffee and now this...LIFE IS GOOD keep it up Joe!!

@corporalclegg914

Жыл бұрын

CyberSlacking is a sign of someone that has their Stuff together. Gongrats.

@Hyngyynj

Жыл бұрын

Getting hella work done

@benny8300

Жыл бұрын

I never would of bought it

@devinlawson4093

Жыл бұрын

@@benny8300 me neither. Looking at the level of work done, its a disaster. Whole thing needs to be gone through. Hot cams crank is a grenade waiting to go off too.

@benny8300

Жыл бұрын

@@devinlawson4093 he seems not to care I wouldn’t buy a basket case . I’m turn key and no oil leaks . Big deal about the mods nothing .

Dude you’ve been on a rampage recently knocking out all these machines, love the content. Keep it up man!

Def no where near the 7k value but still got a pretty good deal on her .

@fastcarfootball8710

Жыл бұрын

Yea maybe 3-4k lol. Not even close to 7 unfortunately lol

@greatest_bumble_bee_dude

Жыл бұрын

Quite welcome to check out the exhaust system / infrastructure. It looks like it's been overheating to me

@dirtygrizzly4219

Жыл бұрын

He is stating that is what was spent on that bike when it was built id say he would get a easy 5k for it here in missouri

@mistasgarage6333

Жыл бұрын

@@fastcarfootball8710 lol 3-4k all day in Southern California

@devilsdust473

Жыл бұрын

Considering all the aftermarket parts on the bike that’s easy 7k here in California. The front end alone will run you at lest $1500 ( a arms and shocks ) add the rear shock, axle, pipe with head work about the same. So fir $2500 that’s a steal 👍🏽

love when the repair doesn't cost a thing, keep up the good content

Dude you have consistent great bike and quad content. Love it

@kirstyedwards4600

Жыл бұрын

Don't reply to the con Joe would be asleep when they replied

Hey man, really love your channel and content, also love when you buy new machines to try and fix them, however I noticed you've been buying a lot lately, and there's no follow up. It would be even better to have an episode 2, 3.. etc. I'm sure I'm not the only one to wanna see you go through any project, and not just the beginning of them, even if it doesn't turn into a project and gets sold, let us know! Can't wait for the next part of the Honda you bought with the destroyed engine, or the old snowmobile with the rotten gas tank! Really interesting content whatsoever, and it is just my humble opinion! Also, if you wanna be less bothered while filming your interventions on engines, maybe consider buying a go pro , or using your phone that you could carry on your chest or head, it would avoid you the constant moving of the camera for the right angle before any move on the vehicle!

@tuckercooper3661

Жыл бұрын

I agree. I wish he would either finish one project in a video or make episodes out of it. But either way, 🔥🔥 vids

@kirstyedwards4600

Жыл бұрын

Don't reply to the person trying to con you click dots and report

@forzanoob

Жыл бұрын

Usually he just shows us getting it to run. Only time I've seen a second video is if he can't get it going in the first one.

@jerrywilcox9890

Жыл бұрын

@Tucker Cooper lol have to wait for parts and locate parts so he can't just finish them with no part.i mean it doesn't take a rocket scientist to figure it out.

Warning phrases... 1. "I'm pretty positive..." 2. "To be honest..."

If that is a stage 3 Hotcams it's - Intake Cam Valve Lash 0.150mm and Exhaust Cam Valve Lash 0.280mm

Great to see you get an easy one from an honest seller. It's difficult to take any seller at their word. The key is don't pay too much just in case the seller is lying out their ass. If it sounds to good to be true it usually is but not always as you well know. I used to fix and flip cars. Too many financial lessons to learn. Off-road vehicles with small engines seems a much better way to go once you understand values. Great channel.

You have come a long way bro since that first video I watched you with that warrior one of your very very beginning videos with the electrical issues keep up the great work bro 💯💯💪

Nice job! Your mechanical aptitude & patience serve you well. Keep up the good work 👍🏻

Btw your nervous laugh when buying bikes always cracks me up keep up the great content Joe and stay safe

Can’t wait to see the next dirtbike you bring on the channel love all the awesome contact that you bring. Love the channel.

I had one of those about 15 years ago and I swear that thing was a Widowmaker because it was just scary fast. I put some Woody’s studs from a snowmobile on the back tire for ice racing and it was insane. I love your channel and don’t stop what you’re doing.

Joe finds an untighted cam CHAIN tightener. Mission accomplished. Finding the cam chain loose was the kicker. Then the stretched chain couldn't stay tight until Joe put an extra turn in the spring. This will soon run out of tension again MAYBE.

Love the content 👌 and you have the best job, we can tell the love and passion you have for your work! Congrats brother

@kirstyedwards4600

Жыл бұрын

Don't reply to theft con Joe would have been asleep

Watched a few of your posts. Just subscribed! Thanks for having great content. Most of KZread is junk. Keep it up brother!

right off the bat i notice that cheap china white cylinder....

just loving these videos. Im from MN and you have a lot of MN way of talking, lol. But you are one of the better small engine repair guys ive ever seen, Wish you were in Cental MN.

Might be a little zealous with the $7k appraisal, lol. It's a good deal but there isn't a sane soul on this Earth that should buy that quad for $7000.

@Fishingandcarstuff

Жыл бұрын

You’ve got to remember joe is our president a crf 110 is 3000

@j85ace

Жыл бұрын

If thats 7k I got 20k in my bike

@j85ace

Жыл бұрын

Specially the 2300 price for a legacy supsension kit 1000 new ive added my bike up when I got it done last and both builds totaled 10k maybe close to 11k

@charlesmurphy1510

9 ай бұрын

It must be 24k gold plated.

@Cultofpersonality09129

3 ай бұрын

🤡

Excellent result. Just found you and I'm very much enjoying these great video's.

No where near 7k bike, but he's definitely put more than that in it. Great buy dude! Keep it up I love the upload pattern you've got on now

@mikespain8655

Жыл бұрын

Previous owner spent twice as much as the quad is worth on aftermarket parts.

@4.5.0.Garage

Жыл бұрын

@@mikespain8655 yup calculate all parts at new, and work to do it $$$$ alot of money. The issue is you can buy a race ready nationals bike for 10-15k so pricing this at 7k is a way to much to anyone who knows about race quads

Keep up the good work man been watching you’re vids for years!

There are honest folk out there that just want stuff gone occasionally, i dont think its ever had coolant back in it since the rebuild. another lucky find

Love the videos dude keep it up!!

What a deal,joe guy sounded pretty legit to me awesome machine with really good parts on it this thing will pull your pants off mate lol look forward to the first ride take care buddy and all the best to the family 👌👍🔧🔧🔧

@kirstyedwards4600

Жыл бұрын

Don't reply to them Joe would be asleep at that time

Nice one joe, you should do a video soon to show all the ongoing bikes you have: there must be quite a collection growing now!! I’m in the uk and even I’m looking for a 700xx cylinder head for you 🤣

Built that same setup in 05. But I had jb a arms,swimgarm,stem and subframe. Very nice quad. Then I sold it and bought a new crf450 and never looked back lol.

Man I love these videos, keep up the great work.

being that he forgot to tighten the carb....i wouldnt be surprised if all he did was forget to add the coolant, easy mistake and easy fix, good thing you caught it 😂

@airadaimagery692

Жыл бұрын

Maybe when he got it ready to run, all he had on hand was water, so then he had to drain it. Done that more than once...

Sounds like you knocked one out the park on this one. Ready to see more on this bike.

Love the channel. Living the good life in Wisconsin. 291k subs, need to get some merch (tees, riding gear, stickers) and sponsorships. You are meant for a higher purpose. Can not Imagine trying to snowball you on a bike or ATV sale. "This CR500 was used by my grandmother to get to and from church."

Love see you upload a fresh video keep it up bro

Looks like you made out real good on this one I'm happy for you.

This is your best sounding and almost fastest quad you've had on the channel. Good job finding this one! I have a 2004 TRX with a milled head that's ported with a wiseco 11 to 1 piston with a Curtis Sparks 🤘🏻

@benny8300

Жыл бұрын

Hahaha yea right it’s junk

@stokley89

Жыл бұрын

@@benny8300 junk huh? What do you ride?

@benny8300

Жыл бұрын

@@stokley89 2006 yfz450

@stokley89

Жыл бұрын

@@benny8300 this thing would walk all over that

great find, that was barely a diamond in the rough! Just needed a quick polish, what a steal.

Another awsome video! Can't wait to see this thing go!

Hey man! Love the videos! Always excited when you post! Keep it up!

You got one hell of a bike bro. You could start a used dealership with all these machines. Keep up the good work.

Another one with timing issues... Im scared of that. Warped heads bent valves... Hope it's all good can;t wait to finish this video and see what happens, I also couldn't wait until the end to comment. 😂(edit) Oh it actually runs, Okay. Different story then. I'm at the end and the fix didn;t cost you a thing, so that was an awesome buy and an awesome video cheers from Canada!

WOW What a deal Joe! Awsome video!

Keep up the great work and content 👏🏾... u keeping me motivated 💪🏽 👍🏾 🙌

Love the videos!

Thats a pretty high compression ratio. I had a bike that was up there too but it ran better on Avgas which I bought from my local airport. ...just a thought.

I recommend changing out that plug going to the CDI box cause those go bad on those Honda four wheeler'e a lot due to getting wet a lot to. I'd use some electrical dilute grease inside of those plugs.& connection contact points to.

You can tell by how surprised he was that it was just a loose bolt causing the leak that hes been told it just needs the carb cleaned to many times

The lesson here is don't have multiple shops and people build anything for you!! It's best to do it you're self. Even of you have to learn as you go!!

I like your style and you have tons of knowledge to share. Thanks buddy, subscribed!

Great video as always

When it says uni cam it means only a single cam compared to some that have the double overhead Cam the early 450s had these still a great motor

I love the sound of the 400 and 450 Honda engines

I am 10 minutes into the video and this thing sounds like a bad idea. Can’t wait to see the rest! You make it look easy!

I'd be suspicious of the porting when the guy doing the job inscribes their work **in sharpie** on the side of the head....lol.

I bought a brand new 2005 trx450r for $5300. Was a very good running quad.

That little turn on the spring done it tp the timing you are a deserve your place on the u tube

Now thats the sell you need to give a Christmas gift too and throw him another 500. He had alot of machines and if u do right thing who's the first person he'll contact for next thing he's selling??? But either way glad to see there is so honest sellers out there like me. Good job Joe on fixing that chain tensioner

Nice pick up for a great price! She's a beast!

Had the same issue on a 2012 cbr1000 I bought last year. Pretty sure It was the same tensioner 😂 Love a free fix

I bought a Honda fourtrax 300 off this guy last winter! 😂

The grips are ODI Rouge lock-on grips. I have them on my Raptor 660

At Last an other 05 trx450r, i'm excited!!

Nice quad,13 to one, it may not run very well on pump gas, . Hope all is good.

Hurry up, can't wait to see it ripping around, I'm expecting at least 3 woohoos 😅

Around here they are 4k CAD+ bone stock, got ridiculous during covid and prices haven't went backup down for the 450s. That's a decent price for what you have I believe.

That custom sub frame looks good!

I think the sprocket guard is bling star same as the nerf bars. Still good deal overall👍👍👍

The only thing that concerns me is that the tensioner is maxed out and will not be able to keep the chain tight if it stretches out anymore. I know that changing the timing chain sucks but I think you are just prolonging the inevitable replacement with the tensioner adjustment. Other than that you got an excellent find.

@jerrywilcox9890

Жыл бұрын

It still has plenty of room to come out if it does stretch.

@hillonwheels8838

Жыл бұрын

@@jerrywilcox9890 oh cool it just looked like in the video to be maxed extended.

@jerrywilcox9890

Жыл бұрын

@Hill On Wheels lol its not in the engine 🤣 😂.so ya it's going to be at max it not hitting the chain guide lol.

@jerrywilcox9890

Жыл бұрын

@Hill On Wheels you understand how a tensioner works.

@hillonwheels8838

Жыл бұрын

@@jerrywilcox9890 I do know. I have been working on cars since the early 90's and my personal and friends motorcycles almost as long. I have changed tensioners on motorcycles but never had to change out the chain but have watched you and a few others on KZread do it.

Well done!

Looks like it's worth 2500-3000. Probably why he was selling it for 2500-3000.

Is that timing chain new or used, looks like a hell of a lot of play, don't want to be heavy in the throttle and it slips, your gonna be ass out. Just be mindful of tolerances. They're there for a reason, so they won't take too long to swap out. Great bike, though. Keep up the great work and vids!

Hello I'm new to your channel and I have been watching a few of your videos amazing buddy 👍👍👍

@lanceward8487

Жыл бұрын

What's this mean bud ???

Try a manual adjusting chain tensioner. Put one on my Raptor, OEMs kept breaking, not a problem since...

Ho Lee Moly Miss Molly Looks like you are genius on timing tensioners, not your first rodeo. I’m excited for the first ride. Where will you do top speed like you did at the parents house?

Love your channel sir

Sweet ride!

You never got a po box or I'd sent you a big gun cdi. Bought for project but wasn't the issue. Great video

Perfect bike to find youngster at local track that fast on clapped out bike and support him for a season you just don't know till help out

Think they make an aftermarket tensioner with like a bolt adjuster that you can tighten manually now that I'm thinking I think since them tensioner are hydraulic n often have top end oiling issue after rebuild they don't ever work right

You can clean a stator, the metal ends just be careful, it'll clean nice with a little brake clean and some scotch brite.

Did you ever think there was no coolent because he never got that far after he got it in time. From the previous owner that rebuilt it.makes sense to me

I can't wait till you start doing what I think you call street bike's i have a YZFR125 I hear there is not many in the U.S. but they have an EFI engine and I hear they are the most complicated 125s they have the same engine as the MT125 I had to change my first engine water had gotten into the engine and ruined my bottom and top ends the conrod was bent and wasn't able to replace the water pump seals was good and couldn't work out how water had got in if you start doing my type of bike I have some spares I could send oil filters plastics wheels ect I tend to buy too many extra spares and would willingly send them over as love how you explain things as you go I was going to get rid of my bike but it owes me double what it's worth and it is my first bike I am legal on and own I would say anyone come to me with a kx125 in good condition I'd have to really think about it as before owning this bike I wanted a 2stroke dirt bike to trail ride

I had an 09red trx450r it had stage 3hot rod crank stage 3hot rod cam wisco 13 5 to 1as well with stage 3dirt digger clutch kit and Ferrara vavles pro comp 10stage ecu thing did 160kph was nuts 5th gear wheelies all day

😉You could easily double your money $$ on this one dude! Your knowledge is vast, and good save on that timing chain tensioner.

Tell him that you got the timing problem fixed and that nothing was bad he will probably be pissed LOL

Oh and great job !!

Can you do another sled but like a newer one like I see a lot of Polaris rmks that don’t run

Would u like to do a video on my 2003 triumph speed four.... it's fuel injected and is really hard to start when cold... and when it does finally want to start it has a ticking noise coming from somewhere in the engine

nice i love TRX 450r and nice to see no snow yet lol O and i miss what Year is that 04-05 or 06-14

Man just gotta say loving the content

Sweet quad ... nice that you got one thatll make you some $$$ ... itll make up fer the ones that become money pits

Awesome deal brother

My 700xx is fully stock so it must not have many hours on it for it to still run good with no knocks or ticks but damn that 450 sounds better

if the manucturer warranty is still good on the motor, changing the valves probably nullifies it.

i never owned one im real old but you really inspired me get one

I have a Honda 300 four trax in perfect condition... Their classic four wheelers & Durable didn't want to part with it but would be willing to swap it for more speed. So if you're looking to trade for one of your quads.

Biff is a good dude I almost picked up that quad from him

Was hoping for the panther video 🤟🏻

@2vintage

Жыл бұрын

That's coming!

@Wisconsin-boys

Жыл бұрын

@@2vintage can’t wait ! Love the Trx very good buy 💪🏻

keep head Tight!

check out the nerfbars i seen twice when you got on it to start they were loose and moving

the guy that first sold this 450 punching air rn