Just leave the radiator, its got a slight bend, perfectly acceptable and will cause zero issues, it's nearly done

Great update. Your doing a good job.

just commenting to say I enjoy seeing what your getting up while I have my tea, keep it up man, I have recently been getting a 2litre TT cant wait to get the mods going, ever since you got your Megane Ive needed a Petrol Turbo Stustustustu

Yo Hayden mate when buying Subaru parts always buy them from ICP if possible all OEM or aftermarket , biggest seller for Subaru parts in the UK

@JustbeingHayden

2 ай бұрын

Thank you 💪💪💪

@scoobymad2999

2 ай бұрын

I 2nd this lukes pretty much got everything for Subarus

Subscriber count climbing! 13K, well done mate!

@JustbeingHayden

2 ай бұрын

Yeah boy 💪 87 Togo

Great work so far keep it up

@JustbeingHayden

2 ай бұрын

Thanks mate

If you want to replace the radiator check if the part numbers are the same and search up the one currently on the car

Great content keep going

@JustbeingHayden

2 ай бұрын

Thanks buddy

Ignore the bullies, there's always going to be keyboard warriors and armchair critics sitting around in their pants being judgemental. Do what you want matey, you're doing great 👍 PS Get some safety goggles! Eyes cannot be replaced!

@JustbeingHayden

2 ай бұрын

Googles needed 🙌

Bleed through the tank 👌🏻then top rad up after if needed 👌🏻👌🏻

@JustbeingHayden

2 ай бұрын

Thanks matey

Bro honestly with that it’s not structural just rivit the thing on and for the pipe on the radiator you can get little brass or plastic pipe joiners. Just do what your doing throw it together decent enuff and use it as a daily while doing the s1. Me personly I would have just took the latch off and threw some flush bonnet latches on the bonnet as the car cost you so much to buy I would have wanted to keep costs down

@JustbeingHayden

2 ай бұрын

You know the deal son 🙌🙌🙌

Keep up the hard work .and sod haters ..everyone has to learn and you find the best way to teach yourself

@JustbeingHayden

2 ай бұрын

💪💪💪💪

Get some rust converter to treat that rust as I prezoom your gonna paint it black again keep at it you'll get there 👌

Mate do what you want. Ignore the negative coments. I would rather do it right 1st time but its not always wirth it. Keep doing the great vids with good content 👌

@JustbeingHayden

2 ай бұрын

Thanks buddy

Zdravím z České republiky skvělý super ❤😊 Marťas 😊😊

@JustbeingHayden

2 ай бұрын

Thank you so much

Mate don't listen to these tools who are keyboard warriors saying this and that, I don't see them doing KZread I don't see them buying salvage cars. You bought the car bud and its your channel you do what is best. Don't listen to the keyboard know it all!

@TheM5Dog

2 ай бұрын

That's because there is no money in it. The larger channels make money because they are monetised from advertising, have a large subscriber base and a lot of views. That alone can pay for the car and its repairs. Selling it / raffling it then makes up any shortfall / profit.

Why does every car on KZread seem to require a new battery ? lol

Dude just measure both sizes of the pipe you need for a reducer.. job done

Getting there.

@JustbeingHayden

2 ай бұрын

Hopefully bro

I would try n send that radiator back, it's probably not going to have the same water flow as the old one with it being a smaller hole

@JustbeingHayden

2 ай бұрын

🙏🙏🙏🙏🙏

@JakeButchart

2 ай бұрын

So very true these 2.5 engines are very sensitive to change

Mate you got so many Subaru breakers in brum you don’t need to bodge it.. give Matty baker a bell at mb developments or sha at pole position, bet they have everything you need in one trip

@JustbeingHayden

2 ай бұрын

Cheers bud

@nurburgringobsessed5722

2 ай бұрын

@@JustbeingHayden Birmingham is literally the Subaru breaker capital of England 😂😂😂

Any parts ring icp import car parts you cant go worong

@JustbeingHayden

2 ай бұрын

💪💪💪

Ok, perhaps I was a little harsh, but you should try and not get too upset about comments. Now, doing it properly will teach you an awful lot more than not doing it properly, and if you continue down the path of buying damaged cars to fix then that will really help you in the long run. Two things. Invest in a digital vernier caliper. It'll help when you need to know the diameter of pipes. Buy some rust converter and brush it on over any rusty areas after you have cleaned up as much as you can with a wire drill brush. Something like hammerite kurust. Do that before you prime and paint anything. Re the weld or rivet, I'd try and weld it if you can.

@JustbeingHayden

2 ай бұрын

Thank you mate ❤️🙌

@TheM5Dog

2 ай бұрын

@@JustbeingHayden and if you can, learn to weld yourself. Again it'll be very helpful to you in the long run if you do more cars like these. Not having to farm work out saves you time and money. To qualify my comments a little further, I want you to do it properly so you learn more, and it'll be right, you won't be having to make adjustments to make things fit. Things will just fit without compromise. Also doing it properly will help people when they're looking for help and come across your video's, you get more subscribers etc.

@JustbeingHayden

2 ай бұрын

@TheM5Dog cheers bro 👊🏼 thanks for rooting for me

@dan.roberts

2 ай бұрын

Yo, I was about to comment on most of this. 😊

@JustbeingHayden

2 ай бұрын

@dan.roberts ❤️

Stop waffling on and show work being done

Matt Armstongs gonna have the Lambo back on the road before the Subaru even through a M.O.T 😳

@JustbeingHayden

2 ай бұрын

He’s done this before this is my first rodeo 😂 nah be on road by the end of the month 🙌

@dan.roberts

2 ай бұрын

Matt has way more experience, money, help and time 😅

@JustbeingHayden

2 ай бұрын

@@dan.roberts all of them I don’t have yet 💪😂

@mex8961

2 ай бұрын

Matt Armstrong has plenty of money and does this full time. Everyone has to start somewhere

@JustbeingHayden

2 ай бұрын

@mex8961 one day man 💪