Buy Dell 2007FPB Monitor: ebay.us/CwWIo1 Buy Dell AS501 Soundbar: ebay.us/Lll0I1 Y Cable Adapter for Sound: amzn.to/3mBmCuy Preorder FF Pixel Remasters Physical Copy👇 Switch: bit.ly/3KoJ9F4 Become a channel member: bit.ly/2KeqCuN Recommended Video Game Stuff On Amazon: amzn.to/2yUs8MXShop Play-Asia: bit.ly/2m4xq5c Shop Castle Mania Games: bit.ly/2MsQuFG Shop Stone Age Gamer: bit.ly/33dGaY6

@Madlittlepixel

Жыл бұрын

@@brianbabin6333 😮 Tomorrow mornings video I will go over the details.

@user-vi4xy1jw7e

Жыл бұрын

​@@Madlittlepixel I can't wait!

@rolandhidvegi

Жыл бұрын

Hey @Madlittlepixel do you ever experience the games on an EIZO display in 4:3?

@OneMore1UP

Жыл бұрын

Another real 4:3 21" ips monitor with low input lag that are made today is the EIZO FlexScan S2133 but it is 10 times expensive(around $1000) don't have s-video or composite but have a display port, dvi and vga, can also rotate as the Dell, people say its a good monitor for retro gaming......but the price...

@Mrman3482

Жыл бұрын

Can you connect your Neo Geo to this monitor?

We had these monitors at where I work. We recently switched them out right before the pandemic hit. One word of caution for anyone looking to purchase these are that the speakers fail frequently. I would recommend finding another solution for sound. The monitors themselves are great!

This is the monitor I keep hooked up to my Mister, great aspect ratio, and it rotates - it's pretty much perfect.

@Cujobob

Жыл бұрын

It not being a native 1080P isn’t an issue? I was considering doing the same.

@CharlieGuitar87

Жыл бұрын

​@@CujobobHi no problem whit this resolution only configure the output on 1600x1200 and this is beautiful because 1600x1200 it's exactly 5x, 1080p it's 4.5X.

You should do a follow up video trying out upscalers, component to VGA transcoders, and maybe one of those lag testers to see how the response time is

@Yamigata

Жыл бұрын

I second this, curious about all of it.

@tubinonyou

Жыл бұрын

I was originally using an OSSC with a 4:3 monitor at 1600x1200 and was extremely satisfied. That monitor died and I got the non-business model of the monitor in this video. I was less satisfied with that because the display was quite dim (probably something wrong with monitor or the non- business model is just that much worse). In any event, I would love to see Ron do a follow-up video as well using a scaler to get razor-sharp pixels on this baby. Oh, and please show us some Dreamcast using the VGA!

@Adam-rt7lp

Жыл бұрын

​@@tubinonyou What Monitor were u originally using?

@francescozappala4453

11 ай бұрын

hey i am using a 2007fpb with an ossc, the image looks very crisp indeed. but there is no way to display it in full screen using an ossc right? i'd just like to see my snes in fullscreen on this monitor but im afraid my snes being pal wont work with s-video and composite video signal seems thats why i'm using the ossc. Would that make sense? @@tubinonyou

I had an earlier version of this 4:3 monitor for my first PC. Had the Dell surround sound with center bar attached to the monitor, it was sweet and sounded amazing to young me. This looks like a few generations past mine with MUCH better inputs and probably better lag. Glad you found the perfect for you monitor, thats all that mattters. I wanna get a Sony LCD Production monitor now, like Wulfden has. Yes I have 2 PVMs and a BVM but each display tech has its charms.

I have a few of these types of Dell monitors picked up from Goodwill around town. I like how a lot of them have a huge amount of inputs.

The picture on that monitor looks great. Congratulations! I’m gonna have to keep a lookout for one now

Wow impressive! I didn't think a LCD from the era would work well at least I never remember ever seeing a LCD back then I liked. I looked it up and that thing sold for $540 when new! 😂OMG no wonder it's pretty good! Glad you finally found one.

I rescued a monitor like this from work right before covid. Some guy had one at his desk for like 15 years, and it was about to get recycled... so I just took it home. I'll have to check to see what model it is.

I have a bunch of these monitors which I use for retro gaming as well. They are awesome. Very reliable too as they were used in business machines.

Thank you for the suggestion. I was also wanting to do a retro corner with any of my retro consoles and couldn't find a good 4:3 to save my life. So thanks again!

Dug out my same Dell monitor, tried it with my gbs control scaler thru vga... was not disappointed. Thanks for sharing!

Thank you sir, I actually went ahead and ordered one for some retro consoles I don’t have the time to mod HDMI into haha.

I have 4 of these.. one of them is mounted 90 and is my current 2nd monitor for my FB/Social media feed.. one of them is a dedicated gaming monitor with a raspberrypi attached to the back with velcro. I used wired snes controllers, but I just picked up 2 2.4g snes controllers off amazon for an update.

Watching your video, I thought to myself, that it looks familiar. I had to take a quick look in my living room at a spare monitor I picked up at a local thrift store for maybe $15 a couple years ago. It is the same model, the 'b' model as well, and did include the soundbar! I really want to hook it back up and do some gaming. Thank you for the great video!

Welcome to the club. I got two of them myself. First one I got. I use it in my arcade1up mod. I like it so much I got another one for the mini classic system. Also to play vertical shooters in Tate mode.

@MrCumstein

Жыл бұрын

TATE MODE!

Found one in Denver today for 20 bucks thanks for heads up. It was missing sound bar so the link helped. Keep up cool videos

I just installed a Dell 2007 WFPB 20" monitor on my Arcade1up Ridge Racer cabinet and I am impressed with the widescreen. I am using it with a PC running Launchbox and Coinops frontends. Tested it on a Retro Shooter Kit too.

I still use one of these as a portrait secondary, also a box load of speaker bars that suit this entire range of monitor. Replacing the old CFL edgelight does wonders.

@01mggt

9 ай бұрын

How does one replace the backlight? Mine is getting a bit dim on my 2007fp

Thank you for this. I just happen to have this monitor, the 2007FPb model. Now to hook a console up to it and try it out.

crazy how i saw these kinds of monitors in school for like 15 straight years and never gave them any thought. now i’m trying to get one myself.

I got one of these installed when I built my arcade 1up mod. Someone was this in original box unopened for 15 bucks. Dreamcast looks great on it with VGA cable!

I saw one of these where I work with the S-video. I was very curious how well that would actually look. Unfortunately, there would have been no way I would be able to buy it from them to try out. Ended up finding an older Sony LCD with every hookup on it. Even a few HDMI ports. Works great.

Slick looking monitor for retro gaming is awesome 👍😎👍

This is an amazing monitor, I put one in my street fighter arcade 1up. It is bulletproof and have had it running steadily for several years without any issues. Got mines for $20 at goodwill and a 2nd years later for free. Just a great monitor for retro gaming or computer applications. I have mine connected to a raspberry pi 3b+:dvi to hdmi and it looks so good.

Being a current owner of an SD crt, HD crt, and retrotink 2x, this monitor really surprised me. Ps1 via s-video looks really amazing.

Just got mine from a local store. Used in very good condition 25$. Bought it for my dreamcast , XBOXOG and gamecube. Thanks man for the review.

I believe I have the A model, and yeah the quality is nothing special, but I do like having something that size for certain occasions and future setups. I'll have to keep the B model in mind. Also, I love that you got the OG NES zapper working with it.

Excellent setup where there is a will there is a way; awesome score that makes you happy and it plays great for your needs!

I had it over a decade ago, excellent monitor

I own 2 of these FPB's and love them for my retro gaming needs.

This is a great monitor. I'd love to see it with a scanline generator, either from MiSTer, or stand alone unit like OSSC. Could you do a follow up with this monitor and possibly use your upscaler with scanlines? Im seriously thinking about getting this after watching your video. Thanks in advance!

@sinetwo

7 ай бұрын

I'm getting 3 of these, super cheap. And I have a MiSTer about to get set up. I will try to compare this with Scanlines and 4-5x upres, vs my PVM-2730QM.

I see you love marvel vs street fighter! 2nd vid with that in the thumbnail! 👍 I forgot about these monitors when I use to I.T. computer jobs. Why didn't I think of this lol

Great video! Doesn't work with old 50hz pal consoles like snes for some weird reason. Works great with ps1 and beyond!

I've been rocking one of these for some time now. They are all kinds of superb. I primarily use it for my MiSTer system.

@SaviorGabriel

Жыл бұрын

What settings do you need to run it with the MiSTer? I got one awhile back, but had trouble getting the image to show even when I looked into it. The times I did get an image, I couldn't get the image to fill the screen.

@ZaPpaul

Жыл бұрын

@@SaviorGabriel In your mister.ini change to this: video_mode=1600,48,32,112,1200,3,4,32,130250

@ZaPpaul

Жыл бұрын

It's also just using the VGA to VGA, although some use hdmi to DVI cables, mine wouldnt sync properly like that. I also have the soundbar attached to the mister so it's all very clean.

I love how you have some Sailor Moon stuff in the Background I love Sailor Moon and I also have Sailor Jupiter as well.

I have this monitor in my bartop arcade cab, they're getting rarer but are still around

i have three of these. They're great.

Just discovered this video for some reason. I ended up using the 19in version of this in a homemade arcade cabinet and it works great. I would recommend these monitors to anyone who is building an arcade cabinet and not using a CRT. I didn't want to have to mount that large and heavy CRT inside.

I have a slightly newer model of this that doesn't have the composite input. My plan is to remove the casing from it and put it in my arcade machine. Just haven't got around to it. Really is a great 4:3 monitor.

I have almost the same model monitor. My monitor lacks the S-Video and Composite video ports. Those monitors are really good for retro gaming, especially for old PC Hardware. I would like to get that same model, but the thing that is stopping me is that I already have a CRT Television for my retro consoles. Plus, I don't think you can play lightgun games on it, being an LCD screen.

Cool little setup. I understand the desire for a little simplicity. Though if I was to get a setup like this, I'd have opted for one of those portable OLED monitors I see on Amazon and a Retrotink scaler.

@ColonelHarry

Жыл бұрын

Is there one in 4:3 ? Any advice ?

@centriumble4113

Жыл бұрын

@@ColonelHarry Not that I've seen. OLEDs look fine when you use a scaler on them since the black borders stay black.

I have several of these Dell monitors... However, lately I'm experiencing power issues and screens that look partially washed out. Either the unit wont power on or I can no longer adjust the screen for optimal viewing. Just remember, these units are 16 plus years old and they don't last forever. So, before you spend your hard earned cash, think about other (newer) solutions. I personally will be purchasing two new Samsung 24" monitors (on sale at Best Buy for $109 each) to replace my old Dell 4:3 20" monitors running RetroPie in two arcade cabs. I can always scale the aspect ratio in RetroArch to get a 4:3 experience... Just my two cents worth...🙂

It's a common monitor. I usually recommended it to many companies before the recession. Graphic artists like the monitor vertical.

There are component to DVI or component to VGA adapters and they might work with this DELL monitor. It's multisync - accepts composite and s-video then should accept 15khz RGB :)

@ZaPpaul

Жыл бұрын

Some do accept 15khz and some don't, it's a crapshoot. VGA to DVI work, that's how I have mine connected.

my work place has these by the thousands, picked 3 up years ago when they started to upgrade the office and giving them away

had 2 of those monitors for my old plasma cutting setup. They worked great and got the crap abused out of them.

Was about to ask if it takes the light gun flash,and you answered 🙌🏽🙌🏽 what a more easy convenient solution to a heavy crt

@Madlittlepixel

Жыл бұрын

Sorry to disappoint but it doesn't lol. But I got a video going up in the morning explaining it. It can work with a handful of NES games and certain zappers on any modern LCD. Simple process. The clip I showed in the video was legit, but I could have done that on any LCD monitor or TV.

@madlittlepixel the colours are good but the screen has a matt finish. I took out the panel and covered it in wet paper kitchen towels, left it for 30 mins then peeled of the matt layer, it came off like a screen protector. Now the screen is more glossy and the games really pop.

@techedog1

Жыл бұрын

Yeah prefer glossy screens too

Nice find. If I didn't have 3 different CRTs I'd probably snag one of these

OMG, that's the best monitor ever. After I watched this video I got one for $129 on ebay and I used a cheap RGBS upscaler to connect it to a MSX system that runs 15hz. Thank you for bringing this monitor to my attention.

Welcome to the 2007fb club homie Been rockin with mine for years

I worked for the company who had so many these dell monitors. Software engineer folks liked to rotate the monitor to vertical position so they could see more codes. Anyway when the company sold to another company, these monitors were on sale for cheap so I bought maybe five of them. Unfortunately they don't have HDMI port so have to buy adapter to work with my laptop

@ethanwasme4307

Жыл бұрын

ye no hdmi is a deal breaker for me 😢

Found 3 of these at a stupidly low price. I’m convinced this might be a holy grail for a MiSTer set up. Insanely sharp once it’s all set up and connected via HDMI -> DVI-D (Though VGA is also great too). Keeping two and one will be going to Coury of My Life in Gaming! 👀. Great video, I had no clue these monitors were so awesome - I was straight up passing these guys up for years.

@GreySectoid

Жыл бұрын

Do you upscale it in mister from 480p?

@RetroSho

Жыл бұрын

@@GreySectoid Straight 1600x1200 source. It upscales 240p. Just need to do a minor adjustment to the alignment in the monitor settings so it lines up perfectly. 😎

Yep it's a dope monitor for sure! And I got one a few years back that I'm installing in my bare Simpsons Arcade1up, that I'm turning into a custom 4 player TMNT arcade machine. I also ordered the custom TMNT bezel kit to mount the monitor from Tulsa Arcades. It will have this Dell monitor with a Dell 7010 SFF PC with a Ge-Force 1650 graphics card, 32gb of memory and running on Windows 10 with tons of arcade games on it. (The Dell PC has everything that I mentioned as I did have it running on an Arcade1up Space Invaders, which I'm selling here soon that I turned into a custom 4 player machine) And all of it will be running with Launchbox/BigBox.

@TexasHollowEarth

Жыл бұрын

Nice job. I'm turning my Shinku Hadoken cab into a multicade. Already got the monitor, Tulsa mount, custom bezel, and new 2.1 audio amp. Also, I've already fully upgraded the control panel parts. Still gotta find a badass speaker set and sub. I've got an old quad core PC laying around that I plan on using to run it all. It's alot of fun modding an Arcade 1 Up cab into a powerhouse multicade 😎👍

@atranfanatic

Жыл бұрын

@@TexasHollowEarth Thanks man! And wow sounds like a sweet setup! Please share when you get done with it!

I had the 16:10 variant of this monitor, so funny to see the 4:3 they are still used all over the place.

Looks great. Thanks M.L.P.

i literally just gave one of these away to goodwill in denver… funny now i kinda wish i kept it lol

Yep I have 3-4 of them laying around for arcade builds that i have not built yet.. you can adapt from HDMI to DVI and run a raspberry pi on them etc.

Bro, Donkey Kong flexing his dance moves on the OSD Menu 6:22

I just found a decent price on one of these Dells. Totally using if for that Tate mode. Thanks MLP 🍻

Really nice monitor !! i just picked a Dell Monitor up myself, great Monitors..

I've been using these in my arcade 1ups for while now great monitor.

You can plug an OSSC and connect it with a HDMI to the DVI port on the Dell

I have a few of these, i’ll have to check out those speakers though

I have one of these but the svideo does NOT work with PAL - (it is a uk spec monitor) and is *very* picky. I think it can depend on exact controller board revision your monitor has

Great video. How are you able to play duck hunt on an LCD?

hello! great content! how about that repro cartridge you have in that snes (link)? good stuf (1st one with Marvel/ Capcom vs Street Fighter)

Pretty good monitor, 4:3 or 5:4 aspect mode really good for retrogaming. Viewsonic is another good brand, 2ms or 3ms screen respond, this dell is 5ms i think. There’s cctv 4:3 monitor (PACOM), this one has component, hdmi, and vga input options, when you use playstation classic mini, you can adjust monitor, and have full screen view instead of two black borders and shrinked gaming view.

I have the work versions of this particular Dell monitor and was never able to get it to work with my retro consoles. I still use them for work 😂

Ah man, top recommendation. We are replacing a number of these at work. Guess I’ll snaffle a couple 😂

You should check to see if the VGA input supports 15khz. I have two Dell LCDs that can support composite, S-Video, and Component 15khz over VGA.

..i have a pretty awesome 480p Sharp Aquos 13" LCDTV for Retro Gaming (6th Gen and lower) that I got while working somewhere in Japan..I used to be a "Wrecking Crew" and this house that we are about to demolish has some nifty stuff that we're about to dispose..saw this cute little monitor and said "hey, i'm gonna take this home if it's okay with you, boss", surely he approved..6 years later, it's still with me, using it every now and then. ..quick specs: 480p 13" LCDTV with built-in stereo speakers, d-terminal (component), s-video and composite..it also has a carrying handle like the GameCube, for easy transporting 👌🎮

For component or rgb you can probably put it through a retrotink and hdmi to dvi

Nice vid! I still use a 40" sony crt. Cant comprise on the screen size😅

Do you need to buy the sound bar for audio? You can’t just buy some sort of 3.5mm audio cable to connect where the power cable for the soundbar is?

Try it with an scaler Via VGA or DVI and compare image. Nice acquisition.

I used to have one of those...but I couldn't stand the ghosting (just pause the video and you will see like three Marios running) and the input lag. Anyway, great video as always!!! Thank you.

I remember some people used this Dell monitor to play Counter strike 1.6/ old Quake games and Halo

I follow your advice. But for nes, snes and Megadrive (pal), I get nothing with composite and S-Vidéo. Is it normal ? GameCube works. Is it because of small résolution (250x240) ? But how do you manage to make it works for you ? 😢

I guess it's pretty cool they work with retro consoles out of box, but my job still has some of these monitors in use on our workstations and they're horrible for trying to do work on.

Looks beautiful

Looks good👍

hey i have a question, i could get my hands on the same monitor, and im very happy about it but... I can't get to play it in full screen at all with my SNES. The only way I could connect my snes is via an OSSC using a rgb scart cable sync on luma, using a hdmi to vga cable to reach the monitor. Because both s-video and composite video wont work and it's not a monitor issue as it is working properly, i tested the inputs with other consoles. And looks very sharap but it's not in full screen and has some black bands on top on bottom of the screen and i would like it to play it full screen. And you seem to have just a s-video cable setup if i understood correctly. Now my question is, can the problem be because my SNES is a PAL SNES and therefore it won't work at all using composite or s-video with this monitor? And also why doesn't it work just with the composite cable? I really dont understand....

I got a hold of a similar monitor, but the one I have has extra DVI & DP, so RCA, DVI, HDMI, & DP. Not sure what the model " is. Thank you 🤓 it's bigger than the one you are featuring here!

I got mine from a computer shop randomly, bought a pc, so I got curios about this monitor. I didn't even know you can tilt it

I got the exact same off ebay but my composite on my n64 is just causing a yellow icon in the top left flashing am from the uk and all my consoles are pall as well any idea what is going wrong

This monitor looks great. Is it recommendable to an arcade cabinet or is it too small?

Youll find to get a larger then this dell 20" 4:3 then monitor you have to spend way way more $$! EIZO territory for medical/professional monitor's. But you could buy the Dell 27" 16:10 aspect ratio and run that in 4:3 mode to get the equivalent of a 22" 4:3 monitor from memory.

How you’re using the NES Zapper on a LCD screen? Have you tried the Dreamcast with the VGA port?

I have one of these with an IPS panel, rev 05 but it unfortunately doesn't accept a 50Hz PAL signal. Anyone knows a 4:3 alternative being more generous with a 50Hz PAL video signal? HP L2035 (TN panel??) maybe ??

I also suggest the Dell UltraSharp 2407WFP. Its basically the same thing but its 1920x1200. 4:3 sources should scale properly. It has composite, s-video AND COMPONENT. Of course with DVI you can use an HDMI adapter for something newer but you need to split the audio too. It also rotates and because it is wider, vertical shooters will be much bigger. Man I'm starting to miss mine but anything cart based, I emulate. And if I did get something like an SNES or N64, I'd HDMI mod it.

@GayPornStuntman420

Жыл бұрын

Just purchased one off ebay based on your recommendation, hoping it's good 🤙

@ashcliffeable

Жыл бұрын

@@GayPornStuntman420 How is it so far? I'm thinking of getting one too.

@OneMore1UP

Жыл бұрын

not the same 2407WFP have 16:10 aspect ratio and 2007FPB have a real 4:3 aspect ratio panel

@GiSWiG

Жыл бұрын

@@OneMore1UP Right, 1920x1200 = 16:10 but 4:3 signals will display at 1600x1200 which is proper integer scaling with black bars on the sides. It has Fill, Aspect and 1:1 options in the OSD. Works great for DOSBox. You also have the ability to display 16:9 signals and it will have black bars on top and bottom. It is a very versatile monitor which can cover composite, component and HDMI, basically from the NES all the way to a Switch and PCs via VGA, DVI and HDMI using DVI to HDMI adapter.

@patrussomusic4987

Жыл бұрын

These are tough to get - any other monitor like this one? Even from a different manufacturer?

I'm trying to get my MVS CBOX with Super Gun to display on my Dell 2006 FPB monitor. None of the wire connections seem to work. Any recommendations?

Hi I want to ask something. I already looking for this 2007fp in my country online shop, but it's not available anymore (and I don't have access to import it through amazon, egg, etc). But I found two identical monitor in term of spec(res, inch size), they are Samsung SyncMaster 204 and HP LP2065 (still available in here). So my question is, have you ever know and try them? the samsung and HP. Because when I'm looking video review of these monitor for retro gaming purpose, there's nothing compared video review for 2007Fpb. The Review some are the basic hardware review, nothing else. So I want to know how is these monitor and why there's no video review of them. Thank you. (forgive my grammar, english not my native languange).

I ended up with an eyoyo 15in HDMI TFT not only is it working well with my Genesis mini it also works perfectly with Roku and the remote

Damn!!! The monitors in the link are located within 20 miles from me. Yep, I gotta gets me one.

16:10 hp pro displays are the best because not only you get like 6 inputs, support for RGB over VGA, component, svideo, av inputs 9n the back but also integer scalping for any resolution and thanks to 16:10 aspect it can even scale 480p content

I snagged what looks like a 19 inch version of this monitor. Any suggestions on a decent HDMI/Composite to DVI/VGA adapter to use with it?

When I worked at Verizon we had a ton of these lol who knew

"Dude, you're getting a Dell!" Remember those commercials?