The Shotgun is my favorite suit from the Iron Legion. If you haven’t checked out the concept art for it, it’s pretty bomb. The limbs lock together to give it a streamlined footprint to minimize air resistance. That’s what the little toothed sections along the limbs and torso are for. Thanks for sharing!

Now make the Heartbreaker and then the Hulkbuster!

@dancingdilophosaurus651

3 жыл бұрын

Don't forget igor 🤣

@DeadpoolXI1

3 жыл бұрын

@@dancingdilophosaurus651 Yeah him too!

@everthinggaming50829

2 жыл бұрын

Redsnapper woild be cool one

@DeadpoolXI1

2 жыл бұрын

@@everthinggaming50829 Redsnapper and Bones!

@everthinggaming50829

2 жыл бұрын

@@DeadpoolXI1 I couldn't find any bones files tho

Hey man! just fell upon your channel a week ago when I was looking to build some fun stuff with my 3D printers. Hands down, this is my favorite channel on youtube. Keep up the great work, the editing, production, and quality of your videos is amazing. Your greatest ability is to describe a very detailed process into something easily understandable for someone newer to the scene without us getting confused. Once again, Keep up the great work. I look forward to all your releases!

@FranklyBuilt

3 жыл бұрын

Hey thanks so much!

Yes

Great Mk40 Suit tour, Frank! I need to finish mine LOL. Very good point about how all of the suit files out there will not fit everyone without some kind of modification. Comes with the territory.

“I’m 6ft not”😂 another great video Frank

Inner elbow is called the ditch

Wow that suit looks very wearable Good job Frank And that colour of filament looks good for painting over. 👍👍👍

i luv that uve mentioned the scailing !

10:16 it is called the antecubital fossa- also acceptable, “elbow pit”

@grootdiaz494

3 жыл бұрын

Or ditch

I just bought a creality ender 3d pro. I have been thinking about getting a 3d printer for a few years now. I watched your video about getting into 3d printing, it was the push I needed to finally buy one. Thank you and you have a new sub.

27:00 PREACH! 🙌🏻 Just like “one size fits all” clothing. Someone who is 5’9” and 150lbs may think that Brand A has the best fitting clothing, and someone who is 5’1” and 170lbs may disagree, and prefer the fit of Brand B. Everyone’s bodies are different. Even people who have the same exact height and weight may have different proportions, and may prefer the fit of different suits.

Love to see a mark 3 it was my favorite of the suites

My favorite suit omg...

Great job love your work

You should resin cast the visor

Hell yeah shotgun is one of the coolest suits in ironman 3

Freaking cool 😎. Love this! Congratulations on the low waste number! Really excellent job!

Nice done mate nice done

Another great video, you spoil us lad! Bit of feedback regarding the monoprice pla+ for anybody that's considering it- it's cheap, prints similar to sunlu pla+, only complaints are the delivery times due to Brexit etc and the advertised colours have been enhanced in the Amazon photos. Never had a colour be so far from what's advertised but it's no biggy if you're painting it, obviously. Again thanks for the heads-up on the sunlu alternative 👌

im waiting for this man to have all 85 suits and the hall of amour for all of them ,like in iron man 3 during the house party protocol

Great video

IF on the East coast, I can help with your Prints. Great Video Frank. cant wait to share my custom prints on Discord!!!!!! SOON!!!!

Love it

Sick

You should make mark 3

@FranklyBuilt

3 жыл бұрын

Maybe one day

Now I want to see the finished suit

@FranklyBuilt

3 жыл бұрын

I’m not finishing this suit haha it was a commission print

Finally

I wish I had time and money to build an iron man suit, I would make a mark 20 and try to build a cabinet to have it in

Sick👍

Nice vid

" *just under 10 roles of PLA* " oh my god thats a lot!

Love your videos and i just started with 3d printing and learning from your past videos. One question why wood filler and not bondo? Also have you ever tried a brush on wood glue instead of wood filler? Do you think that would seal the layer lines better and maybe make the item stronger? I am coming from wood working to 3d printing so was surprised about wood filler.

Good Job! Your empty spools collection is HUGE. Have you ever thought about master spool? I think it would be a good idea to consider in your case. Keep it up Frank

@FranklyBuilt

3 жыл бұрын

Only few companies do that sadly

@mehowcreate5832

3 жыл бұрын

@@FranklyBuilt maybe in future more companies will provide spool refills, I think it's a big money saver

Now make the mark 36 peacekeeper

Cool video, now I want to print myself a suit of armor. I might have missed it, what layer height did you use for printing?

Hey man been watching your videos for a while on TikTok and I got an ender 3 pro which arrived a couple days ago, got it assembled etc but I’m having trouble because the filament dosent stick to the base it just keeps moving around with the nozzle, thanks for making these videos they really got me interested in 3D printing

@daremo50na76

Жыл бұрын

Make sure your slicer settings are correct for the file your printing. Some files say to print below 60 degree bed temp. They are mistaken. Your bed temp has to be at least 60. Everything I print will be at a bed temp of at least 65 to ensure a good adhesion. Also make sure your bed is level. Lots of videos on KZread about leveling every model printer. Lastly you can use glue sticks on bed to get a good first layer. Actually one more lastly, you can select rafts under adhesion in slicer program. These pretty much assure a good adhesion.

Elbow pit actual name is Chelidon. The more you know!

@FranklyBuilt

3 жыл бұрын

Today I learned lol 😂

I bought the Iron Man Mark III Full Body Armor Suit MK 3 Version 2 from Do3D I’m just starting to figure out proper alignment of those parts. I should consult with you on some of them. I have 15 machines so if I get my act together, I should be able to print up a lot of pieces fairly quick. I just wish I had my own nuclear power plant 🤓

@thesauceboss4502

3 жыл бұрын

anythings possible.......

Quick question, if you were trying to 3D print a hollow torus so that there was no support inside and cutting the model a few times as possible, how would you go about that?

@FranklyBuilt

3 жыл бұрын

....huh? Lol it’s already hollow

I know you mention using sunlu filament sometimes, but have you ever used the sunlu S8 printer? I just got one and have been messing with it the last couple days. Haven't gotten it to the quality of my CR-10 v2 yet

@FranklyBuilt

3 жыл бұрын

I did an unboxing and review of one

What do you recommend for settings for getting overhangs without supports? I’m working on a project with Yoda ears and they’re being really troublesome Also, recommendations for painting in snowy and cold weather?

@FranklyBuilt

3 жыл бұрын

It’s trial and error. That’s really it

Hey, I’m 3d printing an iron man suit if my own, but what cad software do you use to cut your parts down to print them. My suit is the mark 5 suit and I’m making it so it can turn into a suit case, so do you have any tips

@FranklyBuilt

3 жыл бұрын

Check my video “how to fit any model on any printer” it’s a newer video

Iron Man suit Mach 40, the high velocity suit, aka Shotgun. The reason why it's called Shotgun is because of the Sonic booms it makes

Mk 39, Mk 40, I see we have the same tastes in Armour. If you tell me the next one is the Mk 30, I swear...

I'm new at 3d printing, have done lots of premade stuff but it sits too much. I have a creality cr 10, but it only allows me to use cura 15 like a very old edition which doesn't allow you to do anything but look resize and print. I really want to be able to cut designs up and or make changes in designs. Any ideas would be awesome. I think my favorite suit to print would be red snapper. Thanks Old Guy

What number of wall perimeters are you using and with what nozzle size? I'm printing my suit with 0.6mm 2 wall laters and 15% infill and now I'm thinking it's too much infill

@FranklyBuilt

3 жыл бұрын

I don’t mess with walls or perimeters. And damn 15% is a lot haha

@SmokAnalog

3 жыл бұрын

@@FranklyBuilt I'll lower that for the next print 🤣

Hello from Brasil , I have the ender 3d pro, and I am not able to print the main of the mark 85, because it does not fit the printer have any tips

@FranklyBuilt

3 жыл бұрын

Save up for a larger printer

hello i saw your video and bought this model. It s possible to make it stand alone (with no one inside) like the ironman behind you in this video?

What printer did you use? And what programs did you use to?

Im doing the mk4 warmachine what do you recommend for infill percentage?

@FranklyBuilt

3 жыл бұрын

I do 5-10%

@chrisbufahl4996

3 жыл бұрын

@@FranklyBuilt ok thanks an great job on the tutorial's youre the reason i got back into 3d printing keep up the great work

what happened to the project? cant find the follow up video awesome print frank!

@FranklyBuilt

2 жыл бұрын

I shipped it off to the buyer

@YakovK09

2 жыл бұрын

@@FranklyBuilt Too bad he didnt upload a video about that suit totally worth it to make it as a shoutout for you!

What shop did you buy the Rust-Oleum Automotive Metallic red I was out and about today in B&Q and Homebase thank you

@FranklyBuilt

3 жыл бұрын

Homebase

is the extender for the ender 3 done by creality?

@FranklyBuilt

3 жыл бұрын

The z-height upgrade is

@UncleVim

3 жыл бұрын

@@FranklyBuilt oh damn gotta find it then. My legs are too damn long to print on a standard

Hi i have a question :) i am planning to make MK II or may be similar iron man set. So, can a creality ender 5 plus handle this? Because cr-10 series very expensive for me Regards

@FranklyBuilt

3 жыл бұрын

The 5 plus is perfect for it

@socialtaha

3 жыл бұрын

@@FranklyBuilt thanks a lot :) also your videos and suits are amazing :))

Can you 3d print out a classic RoboCop suit that has a working system for the visor and the leg holster

When you are going to sand and paint a part is it better to print with random seams?

@FranklyBuilt

3 жыл бұрын

I’m not

@AndrewAHayes

3 жыл бұрын

@@FranklyBuilt I know you are not with this one you already said it is a commissioned suit? but when you print your parts is it easier to use random seams so you don't have to sand the seam off?

@FranklyBuilt

3 жыл бұрын

Honestly I prefer a normal long z seam so I can sand it off in one shot

Frankly how were u able to get the iron man suit in the perfect shape? Like the propotions are just perfect.. did u had like the whole suit in one file?

@FranklyBuilt

3 жыл бұрын

Yep. Do3d scaled the entire suit proportionally. If you print it at 100% it will come out properly to movie proportions usually

@Anton-ob7wm

3 жыл бұрын

@@FranklyBuilt aight thank u

What quality did you use?

Can you explain how to measure yourself to properly scale the suit so that it would fit (to avoid printing more than once :) ).?

@FranklyBuilt

3 жыл бұрын

I have a video on that

@MrFormenis

3 жыл бұрын

@@FranklyBuilt oh really will look into your videos then thanks for the answer!

@MrFormenis

3 жыл бұрын

@@FranklyBuilt kzread.info/dash/bejne/g3Wl0KtudLG3mpc.html for other wondering which video I'm pretty sure this is the one! :) thanks!

Congratulations is one of my favorite armor, what about mk 39?

@FranklyBuilt

3 жыл бұрын

In work

plez make the armored adventures tv show mrk 1

do you mind saying how mucha commision like this costs?

@FranklyBuilt

3 жыл бұрын

No because I’m not doing one of these again haha

The im 6 foot not comment was good

how many walls do you use in cura?

@FranklyBuilt

3 жыл бұрын

Whatever stock is

Hi Frank what nozzle size use?

@FranklyBuilt

3 жыл бұрын

Mostly a .6mm

how much do you charde to print a suit ?

@FranklyBuilt

3 жыл бұрын

I don’t haha this was a very unique situation

@fkingride.5500

3 жыл бұрын

@@FranklyBuilt i c !

Does the guy have a youtube? so we can see him do the painting and electronics.

@FranklyBuilt

3 жыл бұрын

No he doesn’t but I’ll do my best to share it

What happened to the super racer printer you reviewed?

@FranklyBuilt

2 жыл бұрын

I still have it?

@karpmaster

2 жыл бұрын

@@FranklyBuilt ah OK. haven't seen it between your printers

What 3D material do you use to print

@FranklyBuilt

3 жыл бұрын

PLA+

@charliebrecht1783

3 жыл бұрын

@@FranklyBuilt I really love your content and you inspired me to try and 3D print

Do you reclaim all of the failed prints and supports? If so, can you share your way?

@FranklyBuilt

3 жыл бұрын

Nah sadly. You can’t. Not without a pretty pricey machine

@piotrpaczuski4060

3 жыл бұрын

@@FranklyBuilt Too bad, I would not be so afraid of failed prints or too much of support used otherwise. Thankfully we can create less waste with your tips ;) What about outsourcing the waste management? I bet there is someone that makes filament again out of waste material.

@FranklyBuilt

3 жыл бұрын

It’s more expensive to send it off. Better to just recycle it

I see you printing one for yourself. 😂

@FranklyBuilt

3 жыл бұрын

Nah.

@daylightguy

3 жыл бұрын

@@FranklyBuilt 😉 ok.

@daylightguy

3 жыл бұрын

I think i am starting something here. Lol

real question is how do you afford all the filament

@PaulyEditz

2 жыл бұрын

He buys the cheapest

How much tho

21:20

What's the price of filament for these?

@Its_Bennyboi

3 жыл бұрын

Pysch nvm, 10kg = 200 bucks

@FranklyBuilt

3 жыл бұрын

$200-300 ish

Where can I buy a suit from you

@FranklyBuilt

3 жыл бұрын

You can’t LOL

Can you print the marvels avengers game iron man suit

@FranklyBuilt

3 жыл бұрын

Nah lol

@wild8720

3 жыл бұрын

@@FranklyBuilt aww

9:19 did you burn your hand??🤔

@FranklyBuilt

3 жыл бұрын

It’s an old cut from work

@orlastone4639

3 жыл бұрын

@@FranklyBuilt ouch.🙌👏

How many are you gonna make? 😂

@FranklyBuilt

3 жыл бұрын

As many as I want lol this isn’t for me tho

Do you watch anime? There's a lot of cool things you can make from anime

@FranklyBuilt

3 жыл бұрын

Did you not see the DBZ in the background? Lol 😂

@kyubi_9405

3 жыл бұрын

@@FranklyBuilt oh I did not

Would you make and sell a suit ?

@FranklyBuilt

3 жыл бұрын

Nah

@pwdakota94

3 жыл бұрын

@@FranklyBuilt that’s unfortunate. You could make bank off of doing that

First