Hyundai Elantra Fuel Pump Removal

Автокөліктер мен көлік құралдары

Hyundai Elantra Fuel Pump Removal
Disclaimer:
This video is not meant to be a definitive how to.Always consult a professional repair manual before starting your repair.I am not responsible for any problems that you might incur by watching or following this video.Follow at your own risk.

Пікірлер: 53

  • @amadaffej
    @amadaffej8 жыл бұрын

    Great vid. Just comparing because I have an '05 Accent GS. Would the fuel filter be contained in the pump assembly also ?

  • @dave2574
    @dave25743 жыл бұрын

    Thank you for making the video!

  • @godfrey_of_america
    @godfrey_of_america4 жыл бұрын

    Ok...encouraging. I thought I'd have to drop the fuel tank.

  • @dariomendoza6892
    @dariomendoza68925 жыл бұрын

    thanks for the video!!

  • @zx8401ztv
    @zx8401ztv9 жыл бұрын

    That one didnt want to leave home :) That fuel level sender was very logrithmic in operation, 200R max resistance but it was down to about 60R in the middle. Ahh a good pair of molegrips / vicegrips, every toolbox should have some, along with stilsons pipe wrench and channel locks :-)

  • @RichpinTv

    @RichpinTv

    9 жыл бұрын

    zx8401ztv You wouldn't think there would be so much rust being tucked up next to the floorboards like that.

  • @chasebailey3721
    @chasebailey37215 жыл бұрын

    Guy sounds like Peter Griffin.

  • @carslover3509
    @carslover35099 жыл бұрын

    great job

  • @alexdashevsky2180
    @alexdashevsky21805 жыл бұрын

    Good morning sir. I wood like to ask you a question. Das Elantra 2001 and 2003 it is compatible fuel pump assembly. Or they different ?

  • @The90sAreRad
    @The90sAreRad6 жыл бұрын

    If anybody is wondering, this is the same process for a 2000 Tiburon.

  • @BigLee-gw8zt
    @BigLee-gw8zt4 жыл бұрын

    Thanks!👍

  • @martinbrandt8789
    @martinbrandt87897 жыл бұрын

    thank you helped me a great deal.

  • @dacgaming415
    @dacgaming4154 жыл бұрын

    my hyundai elantra is a 2004. when gas gauge reached 1/2 tank makrk i only used 4-4.5 gallon in gas. is my float off or is it the fuel gauge bad in dash???

  • @ronsmith1397
    @ronsmith1397 Жыл бұрын

    The wire that comes out of the fuel pump and runs under the carpet for the rear seats is what im having a problem with... it has been completely severed and im trying to figure out how to fix it the correct way, that way i dont have to splice it, how would you go about fixing the repair in my situation? Is there an adapter i could buy, is splicing my only option, or do i need an entire floor wire harness?(im hoping this aint the case) any and all ideas would help, thanks!!!

  • @syedpervez7009
    @syedpervez70097 жыл бұрын

    Very Help full. must subscribe.

  • @richwilson4655
    @richwilson46552 жыл бұрын

    I have an 07 Elantra but the fuel pump looks totally different. Hose,connector but a metal clip instead of another hose port. How are they compatible?

  • @bibektamang2505
    @bibektamang25052 жыл бұрын

    Nice info thank you so much

  • @RichpinTv

    @RichpinTv

    2 жыл бұрын

    Glad it was helpful!

  • @stevenocegueda1337
    @stevenocegueda13373 жыл бұрын

    Where is the fuel pump relay located in a 2006 elantra?

  • @alyssajeffries8957
    @alyssajeffries89578 жыл бұрын

    What we're all the tools that you used?

  • @crotononhudson7309
    @crotononhudson73092 жыл бұрын

    Can you show that electrical connector on top little better and color of wires distribution .My connector became brittle and broke apart Hyundai no longer sells them , any idea where to buy new one ?

  • @bertoguere74
    @bertoguere743 жыл бұрын

    Hi Sr is that the same process on hyun elan 2004? Thanks.

  • @rebekahwhittington2190
    @rebekahwhittington21902 жыл бұрын

    This explains why my entire car reeks of fuel after having my fuel pump replaced :/

  • @ironhead320
    @ironhead320 Жыл бұрын

    Where can I get a whole assembly for a 2000 wagon 2.0 can't seem to find any

  • @jayfox3030
    @jayfox30302 жыл бұрын

    What year is it cuz I took off those bolts on 2016 and it's not coming off

  • @batone76sanchez37
    @batone76sanchez373 жыл бұрын

    what tools do you need

  • @wadep9916
    @wadep99163 жыл бұрын

    Hi is it possible to just change the fuel level sensor? My gas gage stop working 10 yrs ago..

  • @LizFromDecencyUnited

    @LizFromDecencyUnited

    3 жыл бұрын

    Not really, or easily. That being if you could even find just the sensor. They usually come attached to the pump assembly in the tank and the floats (which is usually what gives out) are generally made of plastic or metal, both of which just fail with time, and fill up with gas, kinda like the float in your toilet tank. Same principle.

  • @JoseDiaz-er4ww
    @JoseDiaz-er4ww5 жыл бұрын

    El mejor video de como no debes hacer este tipo de trabajos.

  • @Bassaid

    @Bassaid

    Жыл бұрын

    Porque?

  • @karadanvers6136
    @karadanvers61367 ай бұрын

    how much should this cost to replace in 2024? dont wanna be ripped off by my mechanic

  • @josedejesus6209
    @josedejesus62099 жыл бұрын

    I know how to take it out, but how do you connect the new pump to the Cap that covers the pump ???? 2000 Hyundai Elentra.

  • @fatboyshadetree5139

    @fatboyshadetree5139

    8 жыл бұрын

    is the pump in the 2000 in the same location???

  • @richardgordon3397

    @richardgordon3397

    5 жыл бұрын

    yes the pump is ina canister also just slightly different setup but basically the same you have to after removing it unplug the wiring connectors then pull 3 tabs out then up for the top to separate then undo fuel line that removes top ..then more tabs on bottom of canister just remove about everything because pump is about the last thing besides fuel strainer..i find it easy i have done so many but can be tuff for first time ..if you have not done this before ask or get a mechanic the clips on canister are plastic and can break easy also other things can break if you dont undo correctly..good luck hope this helps

  • @Happy_Harry

    @Happy_Harry

    4 жыл бұрын

    Is there a tank pressure sensor in there somewhere for the EVAP monitor test?

  • @Happy_Harry
    @Happy_Harry4 жыл бұрын

    Is there a tank pressure sensor in there somewhere for the EVAP monitor test?

  • @MrGlenspace
    @MrGlenspace5 жыл бұрын

    Where is the fuel filter on 05 Elantra?

  • @Frogstand567
    @Frogstand5675 жыл бұрын

    Is anyone else getting ASMR tingles from this?

  • @damonwilliamson186
    @damonwilliamson1868 жыл бұрын

    hey man......what if 2 of the screws are lost that you gotta take it out????is it a big deal??? the screws at 2 min 30 sconds

  • @ramonarevalo3570

    @ramonarevalo3570

    5 жыл бұрын

    Damon Williamtson

  • @troyball4620
    @troyball46203 жыл бұрын

    That's not the fuel pump, the pump is inside the housing and is removable.

  • @xVoidCypher
    @xVoidCypher3 жыл бұрын

    it doesnt seem logical that this is where my evap leak would be coming from. It seems that this would be seated in firmly

  • @xVoidCypher

    @xVoidCypher

    3 жыл бұрын

    Not moving and stuff.

  • @LizFromDecencyUnited

    @LizFromDecencyUnited

    3 жыл бұрын

    Gas cap is the usual suspect for an evap leak, if you're getting a code. Or, you could be super unlucky like I was, and it could be the intake gasket. (that cost me $400, ouch!) I have a 2002 Elantra. I'd start with a new gas cap if I were you. And, you're mostly right about this being seated firmly, if not for the mountains of rust. Still, unlikely. Heck, the only reason I came to this video was to see what a pain removing the rear carpet is going to be, LoL . I've got 2 inches of water in my drivers side foot wells, and it's not coming from the heater core. That leaves a rust hole....... somewhere. From seeing the rust under the seat on this dudes car, I have a pretty good idea of what I'm going to find. This dude is an ok mechanic, but sloppy. He should've cleaned and rust treated everything under there, and replaced the bolts holding the fuel pump housing to the fuel tank, because they're shot.

  • @IXLGAMES
    @IXLGAMES2 жыл бұрын

    Petter griffen, is that you?

  • @RichpinTv

    @RichpinTv

    2 жыл бұрын

    Could be....lol

  • @hachejimenez7236
    @hachejimenez72363 жыл бұрын

    Papa Pzó

  • @mevk1
    @mevk13 жыл бұрын

    you just remove the whole fricken assembly

  • @user-pz9mz9gq2j
    @user-pz9mz9gq2j5 жыл бұрын

    نعيتكم ناعي

  • @samarfadhil1292
    @samarfadhil12924 жыл бұрын

    ،

  • @pucho513
    @pucho5138 жыл бұрын

    horrible job, never took the time to use drop cloths nor clean the area, rust and dirt are gonna get in the tank. Preparation is key.

Келесі