Damn. I was going to try this at home. Then I realised that I didn't have a 500 tonne hydraulic press. Damn.

@DaGalaxy5170

Жыл бұрын

You can use my brother instead of hudraulic press

@foxyy2048

Жыл бұрын

You can use my sister instead of his brother

@mnemonicpie

Жыл бұрын

You can use these 2 imbeciles instead of hydraulic press

@user-wk7xo9vc6j

11 ай бұрын

Mom jokes: allow us to introduce ourselves

@peterroycroft6433

11 ай бұрын

​@@foxyy2048...or @user-wk7xo9vc6j 's mom!

Hardened Steel: "I fear no man but that thing" **Ceramic ball** It scares me."

@christinaromanova4357

2 жыл бұрын

Dont meet him alone 😅

@brandonzacher5263

2 жыл бұрын

Yo for real what's up with the ceramic ball

@tegrqbarv0510

2 жыл бұрын

@@brandonzacher5263 Balls are made of ceramics. It can break the press because the shape or you can google to know more

@kevinfranciscocapaaleman5094

2 жыл бұрын

@@tegrqbarv0510 The reason is the contact surface, is just an small area the contact between the hardest steel and the ceramic ball. In consequence, the applied stress is so high that the steel breaks.

@taintedsasquatch398

Жыл бұрын

It’s because of the small surface area at the point of contact to the press and the strength of a sphere. Plies the tool head could have been a non hardened piece for dramatic effect. This video is very suss to me with the hardness and outcomes and no ceramic ball test of US steel.

Can we just take a moment to appreciate the fact that on an atomic level, these materials are all held together by simple electrical bonds.

@statinskill

Жыл бұрын

Right after we appreciate that Russia has the best steel way ahead of China and the US.

@rxpsycho7326

Жыл бұрын

@@statinskill in this specific test yes. We have no knowledge of where those samples actually came from and a true test would be multiple samples from each country using multiple steel suppliers. Just saying…

@militantcapitalist4606

Жыл бұрын

@@statinskill It would actually be a failure if the didn't come first, their best quality in terms of metal production during the USSR was achieved with steel alloys; it was the thing they were best at, and they always had a tendency to overharden everything steel, which is good in some applications, bad in others.

@alexgeorgescu2122

Жыл бұрын

Plot twist: They are all from China

@jasonoreilly2795

Жыл бұрын

@@rxpsycho7326 you sound salty. You should be questioning the channel

This puts into perspective how amazing steel alloys are and why a lot of our world is built from steel. Seeing the tungsten squish more than the steel was fascinating. Seeing the ceramic split the steel of the press was astonishing

@paulinadeluca9117

2 жыл бұрын

Yeah but those steels were definitely forged, and the tungsten definitely wasn’t.

@redX111t

2 жыл бұрын

Hardness usually isn't the only quality you want from steel unless you are using it for tools or something that hardness is the most desired quality. For buildings you need the right mixture of hardness and resilience or corrosion resistance for example. There are vast number of different steel alloys with different qualities for different use cases. Other metal alloys may have better desired qualities sometimes but they can be too expensive compared to steel products

@oceanwaves83

2 жыл бұрын

Raw tungsten is one thing. Tungsten Carbide on the other hand...

@ec5113

2 жыл бұрын

@@paulinadeluca9117 It is not the forging. It is the heat treatment that matters.

@christopherboyle2403

2 жыл бұрын

Not sure about astonishing. The ceramic ball was proven to be quite hard so it effectively was transferring all the energy of the press to the point where the ball interacted with the block. All that energy on a single point yeh even really strong steel is only so strong and it had already suffered stress from its own testing (you can see little stress cracks in the blocks).

I always thought this press was huge till I seen your fingers lol

@cllee622

2 жыл бұрын

@Edward Elizabeth Hitler yes

@badninja1971

2 жыл бұрын

He may have massive fingers. 🤔

@molylepkemc513

2 жыл бұрын

Same

@m.b.82

2 жыл бұрын

He has hulk hands. Those cubes are actually 4 inches a side

@wb4577

2 жыл бұрын

it's still impressive

In Russia, steel compresses you.

@youcantalwaysgetwhatyouwan6687

Жыл бұрын

*Soviet Russia*

@gintry2

Жыл бұрын

I would say that will happen everywhere

@kingslayer120

Жыл бұрын

@@gintry2 that was a Soviet joke u didn't get it

@svendt9931

Жыл бұрын

Turn right at Fork in road!

@0slavsan0

Жыл бұрын

It indeed does, because safety measures are neglected.

USA and China: oh no hydraulic press scary Russia: is nothing

@ber_gx2966

11 ай бұрын

That is some high quality Stalinium

@slonya_4982

11 ай бұрын

​@@ber_gx2966as russian i'll open a secret of power of russian steel, on russian it's sounds like STAL', it use the power of Stalin

@wuywauydawuyd3030

11 ай бұрын

Actually Russia was the weakest, China was the strongest. Russia started getting squished at around 80, USA around 90 and China just over 100.

@wuywauydawuyd3030

11 ай бұрын

Also he used more force on those two rather than the Russian one

@Vladislav_from_Kirov

11 ай бұрын

​@@slonya_4982Сталь

I’m impressed with the Russian.

@user-xz8id3ob8x

11 ай бұрын

😎

@Alex-wp9oo

11 ай бұрын

They stole it from the Czech

When the ceramic ball broke the press I kind of went wide eyed.

@jbrisby

Жыл бұрын

I know, right? Check me on this...ceramic is baked clay, right?

@adamabele785

Жыл бұрын

@@jbrisby this one probably not

@TheHammerGuy94

11 ай бұрын

For context, this is the cheaper material used for body armor. *Cheaper Considering kevlar exists. But yea, most commercially available ballistic vests for law enforcement is made of ceramic armor plates, made to withstand multiple shots of rifle bullets. Most bullets are made of lead... We seen how much lead bends with a a hydraulic press, and a ceramic ball broke a press...

@ImperativeGames

11 ай бұрын

@@TheHammerGuy94 Kevlar is used mostly because it's lightweight and can be used to make something like a cloth. So it's armor plates inside kevlar vest. Lead is used because it's hard enough against human flesh but it's way softer than barrel of a gun so it can shoot tens of thousands of bullets.

@patrickperry6945

10 ай бұрын

@@TheHammerGuy94 I think the shape of that ceramic ball had as much to do with damaging the press as much as anything. Just my opinion.

So the reason the steel is so much stronger than the pure metals like tungsten and aluminum is because in an alloy the intermixture of carbon and steel break up the crystalline structure of the metal. Unalloyed metals are pretty uniform, so once enough energy is applied on the Y axis, the mass shifts on the X axis. With alloys, the intermix causes deformation and structure that act as bracing on a molecular level. As the steel cools, millions of tiny pockets of varying concentration precipitate out at random as the steel fixes. The result is an internal structure that is far stronger than the pure, crystalline metal. Then when you process the steel, you are actually manipulating these structures into more effective shapes, fixing them when the steel is quenched and hardened. It's a huge science and really interesting to see it in action.

@mjaafari4407

2 жыл бұрын

Thx for your description

@lilyflower91

2 жыл бұрын

Crystalline is an improper term. You mean lattice.

@David13ushey

2 жыл бұрын

@@lilyflower91 true. Lazy terminology on my part.

@tar170

2 жыл бұрын

intermixture? = mixture

@gregoryhall9276

2 жыл бұрын

Very complex. Definitely a huge science. Really fascinating material.

Болел за наш кубик как на Олимпийских играх! С победой, товарищи русские и народы России!

@sticksjke

Жыл бұрын

😆

@mnenorma1n0835

11 ай бұрын

😂😂😂🇷🇺

@ChatJokey

11 ай бұрын

видео фейк. 😂

@mnenorma1n0835

11 ай бұрын

@@ChatJokey пруфы?

@gaskem7416

11 ай бұрын

@@mnenorma1n0835 ты чо, каждый американец знает что наши спортсмены в олимпийских играх на стероидах сидят

Р6М5 действительно хорошая сталь. Например, свёрла по металлу Р6М5 в разы лучше HSS

@antonandreevich5838

Ай бұрын

очень много стали маркируют как HSS но на самом деле это какая-то подъеба, особенно если заказывать из китая. настоящая HSS особенно та которая с 8% кобальта на самом деле очень твердая и износоустойчивая. но вообще да, именно так

This video contains no information on the source of these materials or heat treatment info. A few things to, m35 is not the hardest, m42 is and both aren't 69 hrc, around 64 hrc. If you need the hardest steel look for Rex 121, an American steel regarded as the hardest up to 71 hrc.

@kevincarbone3714

2 жыл бұрын

this comment deserves more respect. nice info, i appreciate

@davidkeeton6716

2 жыл бұрын

The press assy must be made out of REX 121.

@jonathanberry1111

2 жыл бұрын

But the real Hillary Rodham Clinton is the hardest HRC of all.

@foxxcvii7170

2 жыл бұрын

Thanks for the correct information!

@islamisthetruewaytogod6812

2 жыл бұрын

Thanks. God bless.

Got to love the disclaimer at the start about not trying this at home. Hands up how many of you have an industrial press in the back yard 🤣.

@andrewricciardi241

Жыл бұрын

I work at a heavy machine shop. We have a 100 ton press. I'll personally not be trying this at home because the chances of something becoming a projectile enough to scare most sane people.

@masons9541

11 ай бұрын

break out the old nut cracker

Imagine a shelter made out of the Russian steel

@giostisskylas

Жыл бұрын

Imagine a main battle tank made out of the Russian steel

@mnemonicpie

Жыл бұрын

It won't save you against the sh*t that flying with x8 speed of sound tho

@wyqtor

11 ай бұрын

That's where Putin is hiding

@Guardrailkid

11 ай бұрын

What about Stalinium )))))))

@r3n736

11 ай бұрын

@@Guardrailkid Stalin means means man of steel hahaha.

It is nuts to think those little cubes can withstand that pressure

@superchuck3259

2 жыл бұрын

over 80 tons, that is 160,000 pounds per single 1/4 inch. Imagine if there was just a 1/4 inch thick weld by 1/4 long. It could support a big rig. Wild to think of that.

@adaelion3772

2 жыл бұрын

@@superchuck3259 not quite. leverage is your enemy

@sarunassurvila7857

Жыл бұрын

@@superchuck3259 the cube is not 1/4 inch

@Shijaru64

11 ай бұрын

@@superchuck3259 Don't be so uncivilized and use metric, American.

Всем мира, добра и позитива 🇷🇺🤝🇺🇸🤝🇨🇳

@thehypercarkittycats175

2 жыл бұрын

👍👍👍👍

@lannnnnzy

2 жыл бұрын

sure～

@lechat.

2 жыл бұрын

GET OUT OF UKRAINE‼️😠🤬

@Popelyushenko_Elena

2 жыл бұрын

Кто тоже сидел, "болел" за свой кубик? 🤣🤣🤣

@LITTLE1994

2 жыл бұрын

Same to you.

Salut. Je suis impressionné, jamais je n'aurais cru, malgré les traitements subis, que de l'acier serait plus dur que du tungstène. Les russes ont clairement une longueur d'avance, même si elle est minime, sur leur technologie de l'acier... Merci, vraiment intéressant.

The Russian hardened steel look more harder than the US ones lmfao 😹😹😹

@duche_boy

11 ай бұрын

Я сам в шоке

@mackartur178

11 ай бұрын

​@@duche_boyда быстрорез удивляет

@piccalillipit9211

11 ай бұрын

The thing is - there was astonishingly little difference between them all

@KnightMinson

10 ай бұрын

Also harder steel isn't always better

@wsak5991

10 ай бұрын

​@@KnightMinson cope

In Russia, the hardest steel press hydraulic press.

Этот эксперимент лишь малая часть работы технологов. Четвертый год обучаюсь металлургии, знаю в общих чертах производство, но никак не могу выбрать область в которой хотел бы работать, всё нравится) Если кто-нибудь знает проблемы измерения плоскостности горячекатанного листа, то я был бы рад послушать

@nikolatesla6565

Жыл бұрын

(переводчик Google) Вы можете поступить на инженера по материалам и специализироваться в этой области. Исходя из того, что я понял по вашему вопросу, я бы сказал, что это будет неточность в измерении, из-за неравномерного расширения пластины.

@valeriyk9615

11 ай бұрын

Вы можете стать блогером и снимать видео о твёрдости гвоздей и влияния на нее солнечной активности. Главное, что не нужен 500 тонный пресс!

@_Dwarkin

10 ай бұрын

Студент-металлург не Анатолий, случаем?)))

My grandfather's 70 year old sledge hammer is tougher than all of these.

@stupidwg9620

2 жыл бұрын

++++++++

@greekveteran2715

2 жыл бұрын

That's actually true as it's funny! You know why? because Carbon steel, get's better as it olds! It get's stronger, way more dense!!

@g00sepocalypse

Жыл бұрын

You haven't see the soviet-time kindergarten wooden chair

@overlord2066

Жыл бұрын

@@g00sepocalypse soviet style apartment complex 🌚

@audieherron5474

Жыл бұрын

Grandfather's hammer was made by love, and imbued with his passion

Man, now I'm hungry for some aluminum cookies! 💪😎

65HRC is almost the hardest one for the alloy steels. so as you can see the platform is pressed with a little pit. also due to its extremely high hardness, it's so brittle and cracked into pieces after being pressed by a steel ball

@celestialcolosseum

Жыл бұрын

You can prevent that with a better case hardening method though, and steels can go over 65 hrc. It is not uncommon to sometimes see 67-68 hrc surface hardness (it's usually nitriding)

@quinquiry

11 ай бұрын

i happened to drop such a steel tool on the floor ( lathe tool ) it broke like glass !

I have a 50 ton press and used to like to crush things in it. This channel is much safer. Thank you

You might try M42 for kicks if you want. It's a cobalt HSS like M35 but harder. I don't know that it's any stronger in terms of compressive strength. Both are used for high quality drill bits since they retain a hard edge at significantly high temperatures.

@funkbass1986

11 ай бұрын

Надо сравнить М42 с русской Р18

Digging the subtle t2 inspired music in the background. Def fits the theme of crushing metals

So satisfying to watch! The ceramic ball was awesome...

Russian steel is the best of all!

@x-neimi4493

11 ай бұрын

Goida

@obama20127

11 ай бұрын

If im not blind i think i saw that the russian steel got crushed the least so ur right

3:44 The "new" is the strongest of all, not even a scratch!

@erickherrerapena8981

2 жыл бұрын

Esa sólo la puso para comprarar cuanto se comprimieron los demás metales.

@baptistebdn6176

2 жыл бұрын

@@erickherrerapena8981 oh yeah ?

Russian one was the hardest, while chinese steel is the squishiest.

Steel: Squished. Ceramic ball: Breaks press

What I want to know is how did you get Chuck Norris's left ball?? 😂

🇷🇸🇷🇺🇨🇳👊

What metal are the two cylinders the press uses, made from? I've always wondered that. Same thing with molten steel. The crucible where the steel is mixed obviously has to be stronger than the steel to withstand the temperatures reached during the process.

@islamisthetruewaytogod6812

2 жыл бұрын

Indeed

@williamrosenbloom215

2 жыл бұрын

I also wonder about these cylinders but for the steel I can tell you that the most common thing on a small scale is graphite or alumina. I'm not sure what modern steel mills use, but the big Bessemer converters back in the day were mostly steel but lined with ceramic on the inside to insulate them.

@davej652

2 жыл бұрын

The crucible used for holding molten steel are lined with refractory. I'm not sure what it's made from but from my knowledge was and/or is still commonly used in those type of applications.

@kaufmanat1

2 жыл бұрын

Adamantium lined with Vibranium. Pure Vibranium is too expensive.

@crowwick7652

2 жыл бұрын

I figured they used “unobtainium”

I really loved the video, but must admit I enjoy the comments just as well.

Russia😎😎😎

@noone7692

2 жыл бұрын

Thank papa Stalin

Not steel, but housing test observation after a mudslide in Sausalito, about 1980. All the houses were swept away except 1 really old house in the center of the mud flow, in which the mud was forced around it to a height of about 8 feet high. Houses back then were built with old growth timber and a 2 x 4 was 2" x 4", not 1 7/16" x 3 7/16" of new growth. The operative word is old growth which is far stronger. Old growth didn't warp or shrink & was super dense.

The chill terminator music in the background was a nice touch. 👌

"I've got balls of Ceramic!" Doesn't quite have the same ring to it.

Thanks for showing Iron vs. Steel. Shows how far materials tech has evolved in less than 150 years. Kinda scary.

@blacklight4720

11 ай бұрын

150 years?

For the first time the press is not lying.

The music is giving it some major "Terminator" vibes. Pretty cool.

Hardness is technically a materials resistance to scratching and abrasion. These materials are being tested for compressive strength

@daniel_960_

Жыл бұрын

The ceramic ball showed pretty well what hardness means

so it looks like the Russian steel compressed less than the American how come you didn't do the ceramic ball on the American steel?

@Blitzkers99

2 жыл бұрын

That's the reason US fears Russia war machines 😂

@LADY_JEMIMA_FORTESCUE

2 жыл бұрын

no one 'fears' russian weapon after the fiasco in ukraine.

@Blitzkers99

2 жыл бұрын

@@LADY_JEMIMA_FORTESCUE Actually peoples fear Russia More now. You are just seeing fake west media. See Carefully first, NATO and US both refused to help Ukraine, and no country in the world tried to go against Russia. Russia Openly proved again that it alone is enough for entire NATO.

@zetx1834

2 жыл бұрын

He doesn't want cia visit.

@qwertyqwerty-zi6dr

2 жыл бұрын

@@Blitzkers99 look to the war in Ukraine =))

Would have like to seen the US and the ceramic ball.

@torbisoder4768

2 жыл бұрын

it just proves it ..us are a softi😂

@Spencer19165

2 жыл бұрын

@@torbisoder4768 ok snow flake

@torbisoder4768

2 жыл бұрын

@@Spencer19165 ryan... definitions for a snow flake are a person who hide and draw with crayons and not telling others all usa can sell this day are nothing... not even a war... so re define your comment

@nigelsmith7366

2 жыл бұрын

@@torbisoder4768 I say don't dish it out unless you can take it.... And the definition of a "snowflake" is a individual crystal of ice formed in the atmosphere

@torbisoder4768

2 жыл бұрын

@@nigelsmith7366 nigel... thats the old definition.. who ever come up with the new one.. i rather not be involved in this definition... i guess this definition was evolving out of California.... as it is definitely a American side most genuine yankee doodles are ashamed of

Bravo, another good video. I have used hss and M35 cutting tools for years. Not familiar with the Russian tool steel. What material are the bolster plated made from? Got to have very high pressure properties. Thank you for sharing.

@srg.graphouni6628

Жыл бұрын

There's even better alloy thats used in drill bits in Russia. Called P6M5K5 if I remember right. got cobalt in it. 5 is the % from overall mass of steel. P is steel with tungsten, M is molybdenum and K is K is cobalt. Drill bits made from this alloy are really hard.

@thomasglessner6067

Жыл бұрын

@@srg.graphouni6628 Thank you for sharing. That's good to know.

Super exciting test!

Insane how much pressure ceramics can take

I do wish that titanium alloy and tungsten carbide had been done as well, but interesting.

Man, your lens are awesome!

The ceramic ball broke the steel press because the contact point of a sphere is infinitely sharp.

@kajetus0688

2 жыл бұрын

its not because of slight microbumps in both ceramic and press but its still high

That tiny block can withstand 100 tons?!? Wth.

USA VS Ceramic ball?

@killi.jagadamba

2 жыл бұрын

Yes

@user-pz8rb5od7e

2 жыл бұрын

youtube banned

I'm shocked at the amount of dislikes.... so a thumbs up for you 👍 Enjoy your videos alot, keep going 👌

The Russian steel started flexing earlier than the two, but I am guessing it resisted malleability more and that's why it has less deformation when compared to the new cube.

@AndRei-yc3ti

11 ай бұрын

Its one of the principles of Russian reactive armor

My Dad worked 37 years at Timken Roller Bearing he said they used the best chrome steel available, there are train bearings that have 10 million miles on them. 👍🇺🇸🇺🇸🇺🇸

@detroitwhat4017

2 жыл бұрын

Canton in the house!

@deborahchesser7375

2 жыл бұрын

@@detroitwhat4017 yessir , I guess Dad knew the ol Man himself Henry Timken , if we wouldn’t have sold out to Japanese steel in the late 70’s early 80’s, places like Canton would still be thriving, but I won’t start waving the flag.

The reason the ceramic ball soloed the steel is because unlike the press, all the pressure is being applied to one spot, while the press evenly applies the pressure due to the flat surface it had

Thanks 👍

Can somebody tell me how you got those cubes that would be awesome. They are really cool and I like the way they look

Bueno caballeros, si no vi mal, el metal que más resistió, fue el ruso ... 🤷

@jhrtelem

Жыл бұрын

Viste bien.

@luischong1831

Жыл бұрын

Yo también lo vi

@ferchorodriguez4956

Жыл бұрын

En efecto mi estimado.

I Love Rusia 🇷🇺

@Sans243

2 жыл бұрын

You really shouldn t especially in this time

@liquidh6344

2 жыл бұрын

Слава Богу

@user-no1nj9ji1d

2 жыл бұрын

ZOV💪🏻🇷🇺

@svantelofroth9879

2 жыл бұрын

I hate russia

I was wondering if you were going to end up with a divot on your cylinders...you did. Cool vid!

What's the music track playing in the background near the end. Sounds kinda like a terminator theme remix.

"DONOT REPEAT AT HOME THEN WHAT YOU SAW IN THIS VIDEO" ~Dang here goes my weekend plans

1. Russia 2. USA 3. China

@yunellenriqueberdugogonzal6164

2 жыл бұрын

WTF??

@rated-gr3983

2 жыл бұрын

@@yunellenriqueberdugogonzal6164 Fuck The What? Do you think that your steel is more stronger than Russia? Will your wrong, your state of the art products is now scrap today Russia and China is the most advance than the u.s.a. and try to review this video and compare it properly so that you see the difference.

@yunellenriqueberdugogonzal6164

2 жыл бұрын

@@rated-gr3983 Claro, yo no digo lo contrario, es que el orden que pones esta mal para lo que muestra el video, 1. Rusia 2. China 3. U.S.A.

@michaeldendulk9225

2 жыл бұрын

@@rated-gr3983 on board our China built ships, well call the RVS 'rusts very swiftly'... That's all I can say on the matter, but in the end, in any country, you get what you pay for.

Thank you🌹

Cool Channel. Very cool. Thanks

I was really disappointed that the max pressure and the time under max pressure was noticeably different for every steel sample.

@CorporateComedy

11 ай бұрын

👍💯

how did a ceramic ball break a hydraulic pressure???!!!! 😱

@Wilton24

2 жыл бұрын

It's because of the shape

It would also be interesting to know the cost per metric tonne for each variant. Nb somewhat related to the above, these are not the hardest , but the hardest whilst being manufactured to a relatively common commercial standard.

You should have marked the Max pressure on each of the plaina "Steel Bloco Test", like you did on the ceramic ball Stella test. That esa the most interesting dada os Thais test and wasn't emphasised. I has trouble reading the pressure gauge numbers on my mobile.

Can you show the entire press please? I’m curious to see how the base is flexing.

@user-ib4uw9yd1g

2 жыл бұрын

Here is a video from the main channel of the author, on the assembly of a hydraulic press: kzread.info/dash/bejne/ZnaWqZioopXMqpc.html The video is in Russian language, but I think if you want to see how it looks like this is enough)

@notsofast5495

2 жыл бұрын

@@user-ib4uw9yd1g thanks

There are a great deal of products ( and skills) from Russia that are made to last..... it is a shame that the Western countries demonize Russia so much. Full of engineers, scientists, astrophysicists, vast and diverse country, full of natural resources and amazing landscapes and people. Mad respect for Russia, despite decades of antiRussia propaganda in North American film and tv industry.

@macarthur3169

Жыл бұрын

Nobody is against Russia or the Russians but the Russian government is a different story.

@AsGaRd01-

Жыл бұрын

@@macarthur3169 мы очень мирные, но зря ваш Байден влез в наши разборки с Украиной. Теперь экономика США пойдет вниз. Это конец америуанского мировоготпооядка и рассвет нового русско-китайского. Самый адекватный президент был Дональд Трамп, он знал, что с русскими не надо воевать,с русскими надо дружить. Привет из России)😊😘

@nonameman2006

Жыл бұрын

Nobody demonizes russia more than russia itself. Would you like to come over to Ukraine to see what russian orks did in Bucha?

terminator bg music noted and appreciated!

I thought that HY 100 steel was the most difficult to work with. They tried to use it for the pressure hull of the Virginia class subs but it was too difficult to weld.

@genec2235

2 жыл бұрын

Both Seawolf and Virginia class submarines use Hy-100 steel

@Johnny_3_D

Жыл бұрын

An anecdote for you: here in Russia we build submarine hulls out of titan alloys (apparently, we have plenty of it). In US they build SR71 Blackbird out of titan; we make filters for water, shovels and pots out of it, I've seen some myself. I guess, a titan paperweight is next. It would be funny if it weren't so sad.

@Saiga-saiga

Жыл бұрын

@@Johnny_3_D ВСМПО-Ависма крупнейший производитель Титана в мире потому что, у них нет конкурентов

@Johnny_3_D

Жыл бұрын

@@Saiga-saiga Видимо, по этой причине американцы делают из титана сверхскоростные самолёты-разведчики и прочую дефицитную лабуду, а мы - фильтры для воды, кастрюли и лопаты.

@navyseal1689

11 ай бұрын

Virginia class solos every sub in the world 🇺🇲🦅

Why didn't you test the ceramic ball with the us steel? It's a disappointing ending but I still enjoyed the video and appreciate your hard work!

@erynn9968

Жыл бұрын

Don't you by chance think that the main character of the vid is the US cube? XD

Russians are tough.

Steel is an alloy of many elements seen here. So when you mix these elements together you get an even stronger metal.

Dang dude, you making these metals look like Play-Doh.

Just out of curiosity: how much did you pay for the cubes ? what is the average cost of a video like this ?

@swaggermoney9110

2 жыл бұрын

Me want to lnow

@guiza3248

2 жыл бұрын

@Imontothem i want know too

@t00by00zer

2 жыл бұрын

@Imontothem About Tree Fiddy . . . (in Chef's Parent's voice.)

@manubishe

Жыл бұрын

And the parts for the press.

I’ve never seen 40% of bender crushed so many times over

@nikonike163

2 жыл бұрын

hi . what ?

@parkershaw8529

2 жыл бұрын

Bender is 40% Titanium.

@nikonike163

2 жыл бұрын

@@parkershaw8529 i dont think so

the terminator theme totally works for this subject

Press: Do you yield? Ceramic ball: (laughs) I do not.

Second one's initials should have been HFS for Harbor Freight steel.

If three types of the strongest steels that are crushed are shown here, then what is the press piston made of?))

The quality of steel is a function of hardness and strength. Very hard steel is also brittle and will fracture easily. Steel that does not fracture is stronger. The type of steel you get depends on what is added to it. So it depends on what exactly you plan to do with the steel, you adjust the specific qualities accordingly.

What type of steel or material or the hydraulic press plates made from?

Would love to see your hydraulic press pressing another hydraulic press.

@kevindamarray7463

2 жыл бұрын

🇷🇺🤜🏻🇺🇦☠️

What is amazing that the RC 69 USA steel didn't shatter.

@verdienthusiast3868

2 жыл бұрын

Probably 10$\cube

De que material están echas las prensas hidráulicas para no deformarse con todo lo que aplastan

What conclusions were you trying develop? Pressure or shear?

Who else here covers their eyes a bit for fear metal scraps will pop out the screen and hit you 🤣

Why he didin't use the ceramic ball with de USA steel??

@jonathanberry1111

2 жыл бұрын

Broken equipment?

What material is thr press cylinder made of?

I'm curious as to the final temperature after compression.

Kinds hard to draw our own conclusions of the results by eyesight on our screen. You could've used a micrometer to exactly measure for us the clear winner.

@jonathanberry1111

2 жыл бұрын

@Edward Elizabeth Hitler Well, the Chinese one was clearly (and unsurprisingly) inferior. US .vs Russian was much closer.

@lajossimon6371

2 жыл бұрын

Russian was the winner . You can see that clearly .

@aidanatkinson7717

2 жыл бұрын

Well to be fair the Russian piece only reached around 95 tons while the American one reached 100 tons. They both began to deform around the 90-95 ton marker though so measuring by deformation makes no sense because the loads weren’t equal.

@lajossimon6371

2 жыл бұрын

yes that is also cane be a reason why is the American get bit more deformed than Russian . But you see that , what i had mentioned , there is a different between , and the USA piece has deformed more.

@dontwanta

2 жыл бұрын

@@aidanatkinson7717 That's what I meant, give the russian a little more & it would've been more equal.

A ceramic ball harmed the hydraulic press??!! Wow!

@tom-oneil

2 жыл бұрын

The military uses ceramic in there body armor it's impressive stuff

@johnts2252

2 жыл бұрын

@@tom-oneil Really it is impressive. Good point about the example you said. 👍🏻

@Absolutan

2 жыл бұрын

@@tom-oneil but ceramic have weakness. Suddenly very strong impact will break ceramic

@bo-dine7971

2 жыл бұрын

@@Absolutan I think that's the point when used in armor and such, body armor has to dissipate the energy, otherwise your ribcage is dissipating all the energy into itself.

@Absolutan

2 жыл бұрын

@@bo-dine7971 at least you not become donut

Did the first samples you pressed come from some kind of kit? I ask because I think it would be cool to have samples like that

@walkfromwalkstreet

2 жыл бұрын

i think that from ali

Btw, what type of steel is you hydraulic plates made of?? Cause it's tougher than the other metals...