Recommendation: hydraulic press vs hydraulic press

@Thescribbley

2 жыл бұрын

Surprisingly good idez

@robloxrules4524

2 жыл бұрын

We need that

@raccongamefit8831

2 жыл бұрын

Hidraulic press:Our battle will be legendary...

@Dr_Warr

2 жыл бұрын

No itll end the world

@centauria9122

2 жыл бұрын

The sheer pressure of those 2 things pushing against eachother would create a ⚫.

Fun fact: Tungsten rings are purposely given weak spots at 4 quadrants or 3 thirds, depending on size, so that if it gets stuck on your finger they can take it out. You can see how it shattered into 4 almost perfect quarters.

@marcelo55869

Жыл бұрын

I wanted to see pure tungsten to see if it's ductile.

@zimzimal8547

Жыл бұрын

@@marcelo55869 tungsten has extremely low ductility

@billiewright3577

Жыл бұрын

I’m not questioning but how did you know that?

@JimmyBeanz13

Жыл бұрын

I never even knew they made tungsten rings, we use it for the weight of balancing rotating parts in my industry.

@f4wnz132

Жыл бұрын

@@billiewright3577 My jeweler told me. I have a tungsten wedding band.

For anyone wondering as to why the soft brass shattered… brass becomes harder as it’s crystalline structure is crushed with pressure. It goes from soft and malleable to brittle and hard. Copper can do this as well but not to the same extent. Work hardening alloys are my favorites. Edit: My brain short circuited and I was saying bronze. I work with these metals on a semi-regular basis so I don't know what I was thinking. Sleep is important folks.

@TheGodsrighthandman

2 жыл бұрын

TBH, I expected what happened to the bronze to actually happen to the iron. Can only surmise that iron was forged, not cast.

@Macabri_2k10

2 жыл бұрын

It actually looked more like brass, brass and bronze often gets mixed up by people, bronze and brass are both copper alloys, bronze is a copper/tin and brass a copper/zinc alloy. Bronze typically has a darker hue than brass and the shattered pieces looked like unoxidized brass

@johnnyboy3357

2 жыл бұрын

If this guy press popular bicycle tube metals made to become bicycle frames, it be scandalous

@jonny-b4954

2 жыл бұрын

@@Macabri_2k10 It does almost look like brass. I remember first time I melted down some copper and zinc to make brass. Put zinc into the copper stupidly after copper melted so it bubbled and instantly vaporized ha and I didn't realize how much gas the zinc would put off (I think it was green/yellow gas?) and I didn't get to add my few percent tin so got pure brass instead. I'm really enjoying getting into making metals.

@jarobryan307

2 жыл бұрын

It could be a silican bronze instead of copper and tin because it is to bright to be regular bronze though it could most definitely be brass instead of bronze

I remember first learning about the brittle nature of tungsten when learning how to weld with tungsten electrodes a decade ago. That was pretty annoying as a beginner, to have your electrode break and then have to go regrind the tungsten to a point while also trying to avoid breaking it while grinding it lol

@uwu.-.5873

Жыл бұрын

Sounds hilariously frustrating

@lasso79ify

Жыл бұрын

When I hear of tungsten, my tig welding days come to mind.

@Grizzlox

Жыл бұрын

Yes, in general the harder something is, the more brittle it becomes

@MartinMaat

Жыл бұрын

The tungsten electrodes used for welding are actually very soft. These are pure Tungsten (W) which has a very high melting point (3600 Celcius) which is important for an electrode that is supposed to last (its material is not added to the weld). The ring shown in the video is really tungsten carbide which is really hard. This is used for cutting as in drill bits.

@ryananchors1967

Жыл бұрын

@@Grizzlox was about to say that. Obviously not always a linear trend, but generally it’s true.

Would like to see live temperature change of each metal during deformation with a temperature camera.

@GarageKing

2 жыл бұрын

Thats a great idea, they could just point a heat gun at it as its getting compressed

These videos always make me feel like I should be wearing safety glasses while watching.

the carbon ring is a bike spacer, where the fibers are produced vertically and can hold a lot of pressure, horizontal they are rather weak

@tankedwarthog6424

2 жыл бұрын

That is what I thought to I just didn't know that it was a bike part

@gregjones3660

2 жыл бұрын

Yeah I just didn’t want to say anything…

@antonioverdad5071

2 жыл бұрын

@@gregjones3660 I won't say anything!

The one surprise to me was the tin. I alloy it with lead for bullet casting, so I know it's not particularly hard, but didn't realize it would become so plastic under extreme pressure. Very cool.

@trespire

2 жыл бұрын

And beautiful after plastic deformation.

@bryanteger

2 жыл бұрын

What was sweating out of the sides?

@trespire

2 жыл бұрын

@@bryanteger Blood an tears of whoever made it !

@grahamshere

2 жыл бұрын

@@bryanteger They squeezed the piss out of it.

@grimfpv292

2 жыл бұрын

@@bryanteger Good catch. I think it simply melted from the friction.

I’d love to see a heat map. As the materials bend and compress, they should produce heat. I’m curious if that heat would be concentrated at the failure points.

@geckoo9190

Жыл бұрын

Well yes, it should work like that, like when some one bends a piece of metal, the bending point starts to get warmer

@Duck_that_funny_channel

Жыл бұрын

yes it well but not enough to see on the heat map so sorry

@rihasanatrofolo2472

10 ай бұрын

Everyone wants to see that, but no one does it

Who's here after the Titan implosion?

3:47 is the best representation of what would have happened to that Titanic Sub

@smsandel

10 ай бұрын

Not likely. The most likely scenario would’ve been separation of the titanium rings from the carbon fiber cylinder ends resulting from galvanic corrosion as well as multiple dive cycles where the compression coefficient difference between the two materials caused uneven pressure which by itself can also cause the two materials to come apart regardless of how well they were adhered together in manufacturing. Those rings are what the end caps (titanium hemispheres) attached to.

@leptoceratops

10 ай бұрын

Those cracking noises were probably the last thing they heard 😬

I love your channel I just wish you would have a summary page with a list or chart of the end results of all the tests!!

The reason to get tungsten, is because it shatters. If your hand gets crushed, to the breaking point of the metal, tungsten will shatter while the other metals will continue to crush your finger even when the overall pressure is relieved.

@kiwi9065

2 жыл бұрын

Just get glass for the maximum brittleness

@chiefkeef74

2 жыл бұрын

That and tungsten carbide has a good weight feel to it that doesn't feel like it'll fly off. Then again mine has a carbon fibre inlay. Still a perfect wedding band

@Darkk6969

Жыл бұрын

Yep, one of the reasons why I have tungsten carbide as my wedding band. Also, very scratch resistant.

@maverickf22eagle94

Жыл бұрын

@@DevJonny I was wondering the same

@zeddybuddy8619

Жыл бұрын

@@Darkk6969 simple tap on glass also can break the glsss..beware

Tungsten went out with explosive force, seems like being one of(if not the most) dense metal you can hold in you hand without getting radiation sickness just causes a lot of force when broken. Even in the 50x slower than real time, those fragments were going extremely fast.

@mmaaddict78

2 жыл бұрын

It’s less about mass and more about the crystalline structure in the metal.

@captainscurse8619

2 жыл бұрын

That's because it's tungsten CARBIDE. If it's very pure tungsten it wouldn't shatter because carbon in large quantities makes materials brittle.

@Anenome5

2 жыл бұрын

It wasn't tungsten, it was tungsten carbide, a ceramic material that fractures. Tungsten by itself is a dense metal that would've deformed like iron.

@unoriginalcopy9844

2 жыл бұрын

no, it exploded because of the carbon

@freedomofpeach9790

2 жыл бұрын

@@unoriginalcopy9844 Carbide

These test are brilliant, the understanding of the strengths and weakness of different types of materials. Awesome. 👍🏼👍🏼👍🏼👍🏼

Carbon fibre is strong to torsion, not compression, Tungsten (and especially the carbide alloy) is very hard but extremely non ductile making it brittle under compression, Titanium is as strong as steel when accounting for density, but not actually as strong hence the lower failure point. Hence why titanium/aluminium/magnesium are used in aviation and steel is used for buildings

@nicolasmoreno9442

Ай бұрын

The strongest steel alloys are a little bit stronger than the strongest titanium alloys. But the comparison here was not fair. We don't know the weight of the rings, nor their actual quality and if they are made from what they are supposed to; when can only take the author in good faith, which is not a reliable thing to do. Last but not least; Titanium is very expensive because its refining process is quite conplicated, its welding requires an oxygen free environment. That's why is not used in everyday applications, not because steel is stronger. Aviation, high end automobile industries and other highly specialised applications, like cutlery for elite climbers, need lightness and strength, and thus can afford to spend more. In day to day applications it is impossible to distinguish titanium and steel in terms of "strength" and durability, but you would notice it's ~50% lightness and its corrosion resistance. And its incredible increase in price tag😂

OceanGate CEO forgot to watch this

Looks like carbon fiber is better than tungsten for submersibles, at least

why didn't frodo just compress the ring with hydraulic press so no one can put it on his finger?

@gregjones3660

2 жыл бұрын

Why didnt he just offer them a groove ring instead?

@DanielLCarrier

2 жыл бұрын

It was able to resize itself. It could probably reshape itself too.

@karkosgiehex

2 жыл бұрын

The Dark Lord Sauron... has a tie tack? Why the hell does Sauron need...? Oh, there has to be an ork stupid enough to deliver the news.

Elrond: The Ring cannot be destroyed, Gimli, son of Glóin, by any craft that we here possess. Gimli: Pulls out hydraulic press.

@NeilWatkinsfromaccounting

Жыл бұрын

Far too few likes on this comment

@cptsteele91

Жыл бұрын

Then it becomes the one tie pin to rule them all 😂

@xanhthanhau8888

Жыл бұрын

The main question here is why he has the ring

@Jadeddoxy

Жыл бұрын

💀

@Loocas432

10 ай бұрын

i think the hydraulic press was also forged in the fires of mount doom that mush be the only reason why they were able to destroy it

Haha don’t try this at home like everybody’s got a hydraulic press in their homes 😂😂😂

Well this is suddenly a very relevant video. Oceanview should have watched this vid first.

The tin crushing was pretty cool. I assume the liquid coming out was molten tin since that particular metal has a relatively low melting point.

5:38 listen to that sound carefully, it sounds similar to gta mission failed sound.

Legends know that the carbon fibre ring is actually a spacer used in the top tube of MTB fork 😁👍🏽

I saw a MASSIVE flaw in the legitimacy of the video, the One Ring cannot be crushed or broken by any means it MUST be melted in the fires of Mt. Doom in Mordor where it was forged

@Myrius69

2 жыл бұрын

The only explanation is that ring is fake af

@Yupster2501

2 жыл бұрын

One does not simply walk into Mordor.

@andrewstoffel8031

2 жыл бұрын

Yeah, and you can't fly on your travels there on an eagle for any part of the journey towards the mountain.

i wish ocean gate ceo checked with you about titan sub

Stainless: fractured. Titanium: "I refuse to break. Bend, sure. Break...?"

@darksidempg

2 жыл бұрын

No es tungsteno eso es cerámica de tungsteno

@denniszhang9278

2 жыл бұрын

the stainless fractured along the weld seam, whereas the titanium was probably cut from a monolithic rod. Hardly a fair test :)

@JohnJones-cp4wh

Жыл бұрын

Need also to know the grade of the Titanium. Ditto the Stainless and Steel options,as this would affect the result

The lost titanic submersible was made of carbon fiber

If you do this test again, I'd like to know the temperature of the metal when you exert pressure on the item.

I found this strangely satisfying to watch, thnx :). Was shocked to see the bronze one break so intensely!

Anyone else here after that sub imploded exploring the titanic June 23, ya it went like that but faster

They should of done this test with the titan hull, even though the carbon fibre was stronger than i thought it was gonna be.

They people from Ocean Gate needed to watch this video before making a submarine out of carbon fiber!

I need a table at the end for better comparison, if you could provide it would be much appreciated, like your videos and your concept of experimentation

Well, I wasn’t expecting the bronze to shatter! 😳 Made me jump a little.

“This ring cannot be destroyed by any craft that we here possess” Hydraulic press channel: 😆

Fun fact: If it was a small tungsten cube, it would need over 100,000 kg of force just to even start flattening it

@AntOfOushu123

Жыл бұрын

and for carbon fiber, it took over 500k kg of force

@twintyara6330

Жыл бұрын

Not fun though

@Alex-kr7zr

Жыл бұрын

@@twintyara6330 Fun is in the eye of the beholder.

You made a custom Snapple cap at the end. Cool.

My interpretation - the Titan submersible failed due to the carbon fiber hull and the outside pressure.

"The ring can not be destroyed by any weapon we here possess..... it can only be undone by the fires from which it came from." 😱☠️

@RuralTowner

2 жыл бұрын

If it was made using a press it can be destroyed in one...

@10:22 you can see the tin starting to literally sweat under pressure lol 😆🤣

@auralynn3862

2 жыл бұрын

Yeah wtf?

@despicableone4495

9 ай бұрын

You would too

And that's why you use steel on submersibles not carbon fiber

My mother had 2 titanium screw put in her back for a fusion, yet they both broke but this is still baffling to me. I wish there was something I could do but trial & error as they say. The price of taking a chance is quite high. Thankful to this day she can still walk & it was years of pain to get where she is today. Random but I wanted to see how the titanium reacted, so thank you for this video!

Ocean Gate Titan brought me here. Tragic

I would like to see you do a volume density test on the bars before and after. It appears that they compress disproportionately greater length wise to the expansion to their circumference. You could do this by dropping the initial bar into a measured full glass of water, allowing it to overflow and see if there's a difference in final amount when doing the same thing once its compressed. Otherwise thanks for making these videos. Can you please also do a compression test on Beskar. Cheers 😁

@vincentlevarrick6557

2 жыл бұрын

I think you've misunderstood some physics somewhere along the way. *The mass is constant* . There has been no net loss nor gain of substance through this process (with the exception of those brittle materials that shattered). What has occurred is a change of *volume* (size and shape, thus contributing to how much space it physically occupies). I believe you're thinking of a charge in *density* . Density is mass per unit volume.

@misfitfootprints2103

2 жыл бұрын

@@vincentlevarrick6557 you're right, I meant density. I've edited my initial comment now.

@chamarees

2 жыл бұрын

I ain't a genius but you three are legends

@jpolowin0

2 жыл бұрын

@@misfitfootprints2103 I wouldn't expect there to be a change in density through a process like this unless either (1) the original material was porous on some level, containing voids that were compressed out of existence; or (2) the material changed into a different crystalline phase, so its atoms packed more closely together. It's not impossible for the latter to happen with pressure, but it would depend on the material, and I don't think these pressures would be enough. Tin famously has two crystal phases that are easily accessible at "normal" temperatures, but it's clear that the sample used here is the higher-density malleable one from the get-go. Pure copper appears to have only one crystal structure, ditto aluminum. Iron has a couple of different crystal forms depending on temperature and pressure, but the pressures required to have an effect are extremely high - on the order of 10 GPa (about 100,000 atm). The press would create pressures orders of magnitude lower than that, especially since the ingots were being compressed along one direction but open on their sides.

@longsteinpufferbatch4949

2 жыл бұрын

@@jpolowin0 Lots of good info typed here 🙏 thanks for writing that

What grade titanium? What kind of wood? These things make a huge difference.

Probably getting a lot of traffic this past month 😂

Would love to see the deformations from the view of a thermal camera

It might be better to conduct these tests by weight rather than size, since I assume that weight is what is generally more important than the size of the object. Or perhaps just factor the weight into your calculations.

That's a neat looking ashtray at the end there.

Now we know what's best for aircrafts and what's best for armored vehicles. Thank you.

Forget how strong those rings and cylinders are. What I really want to know is what is the piston that compresses them made up of and under what force it breaks!

no wonder the titan imploded.... this shows how the carbon is really weak on this scenarios

Enjoy the channel and I have been searching other videos but havent found it yet. What is the song you use in the middle of this video, starts around 6 minutes, and other videos?

Id like to see these comparisons done with all the rings having the same dimensions

Can you do this test again with identically shaped and sized rings? I know you can still kind of get the idea but I feel like the results might be a little different.

@martinb.770

2 жыл бұрын

Just what i thought. Either same shape, section cut or same weight, for comparable results.

Would be interesting to see those material by similar weight - not just volume.

@oldfrend

Жыл бұрын

yup. titanium has twice the strength to weight ratio of steel, but also half the density. so the same mass should be twice as strong.

@appa609

Жыл бұрын

depends how the size is scaled. If the major diameter of the ring is kept constant while thickness varies, then the lighter materials get ridiculously buffed. Bending strength scales as the cube of section depth.

Wow, an actually useful hydrologic press video

Огромное спасибо за труд !!!

Sauron is going to be so pissed when he finds out about this video

Awesome video, I want challange you to test rock samples. Get yourself some rock cores and put them versus your press. Rock, unlike metal is very resistant to compressive forces, and weak to tensile forces, (metals are strong vs tensile loads). There is a growing rock engineering science around the world, and we all would highly appreciate to see different rocks being loaded like this. Also I want to invite you to share stress units being displayed in your press, and not the force, since most of the engineering community work with stress when it comes to loading and deformation.

OceanGate should've thinked twice before building their own subs out of a millions worth of carbon fiber

I'd like to see you team up with a smith and test one material at different tempers, hardens, and heat treatments.

5:54 Tungsten Carbide is brittle

@captainscurse8619

2 жыл бұрын

Yeah because carbon in large quantities makes things brittle. I guess he rigged this to make it not be #1.

What material is the hydraulic press made of? I'm surprised that with such high pressure the press doesn't break and there's no damage.

@divyangverma9880

Жыл бұрын

Mostly made of steel nical and titanium alloys.

@UTUBE3JC

Жыл бұрын

Adamantium. Just kidding I think stainless steel

do you have a spreadsheet with the results? and also did you measure the deformation?

What brand and type of press is this? I hear what sounds like an engine running. I've never seen a press like this.

I have a tungsten wedding band and I remembered them saying they have built in fracture points in case it needs to be broken off.

I know of stronger materials, better fitted for deep dives

That hydrolic machine sound like suspance full background music 😂😮

Love the T2 music in the background

omg! that tin almost got flattened! loved it 😊! ever think about trying that unobtanium? not sure if I spelled that right.

@realbrickbread

2 жыл бұрын

How is he supposed to get unoptanium if it is, like the name says, unobtainable?

@loripeters3133

2 жыл бұрын

@@realbrickbread you’re so punny 😁

@realbrickbread

2 жыл бұрын

@@loripeters3133 bruh

@kusisava

2 жыл бұрын

kzread.info/dash/bejne/m6CVx9uQn5yXotY.html

@zthecat

2 жыл бұрын

Class act troll, or just not very smart? The world may never know

So all Frodo needed to destroy the one ring was a hydraulic press

I insta liked the video as soon as I saw the one ring!

Recommendation : Tungsten carbide buttons with different cobalt percentages. Like WC with Co 5,6 and 8

Why am i watching this?💀

@m.b.82

2 жыл бұрын

Because you are

@vincentlevarrick6557

2 жыл бұрын

Because it's mad cool.

@bradentheman1373

2 жыл бұрын

i’m on the toilet ina restaurant and it stinks like hell and i’m watching this because i have explosive diherea

Didn't expect stainless steel to beat the titanium ring, there goes my hope for an Abyss wedding band. Also didn't expect copper to put up that much of a fight, i expected it to squish like clay.

@kunjukunjunil1481

Жыл бұрын

Titanium is no way stronger than steel but it's lighter .

@karlgustav5490

Жыл бұрын

it's not hardened steel, and it have a very low carbon, something like 316l , 420 or 304 stainless steel. it react like iron. do that it with a hardened 1090 high carbon steel, or W2 or D2, you will have a really different result :) and btw, steel didnt beat it. depend what you are looking for. make a knife with titanium, or tungsten, both of them will make shit knife. all is about using the good material for the good thing

@TheMaxxyM19

Жыл бұрын

That’s why old cars made of steel take no damage but hurt the driver. where as new ones with more titanium an aluminum protect the drive more because they absorb more of the impact

@dsch1znit

Жыл бұрын

@@TheMaxxyM19 Old cars made of steal get completely crushed/destroyed in accidents. Cars with proper crumple zones, no matter what material they are made out of, protect the driver more. The design is more important than the material. I remember popular mechanics testing the theory that old cars were somehow safer due to being all metal and large. Here's a video showing how old cars get completely demolished in accidents while the new car slows the impact, utilizing crumple zones. kzread.info/dash/bejne/fXZq0cefgq69nbw.html

@InformerMaz

Жыл бұрын

@@dsch1znit Not always, depends on the accident honestly.

Nice work!!!👏👏👏

I won't lie. Hearing the carbon fiber ring crack (3:56) made me wince 😬

I thought we needed Mount Doom to destroy the ring.

We all know that the one Ring 💍 to rule them all can't be destroyed right 😊

@remora_44

2 жыл бұрын

yes, yes it can be destroyed

@johnwood9504

2 жыл бұрын

If you look closely at the nameplate of the press you will notice it is made by a division of Mt. Doom Industries, Inc.

@GarageKing

2 жыл бұрын

You know it !!!!

Was that pure titanium or a common alloy like 3/2.5 (typical sports Ti tubing) or 6/4 (typical machined Ti parts)?

thanks for making this video such a good idea

Did water actually get squeezed out of that tin?!

@markgearing

2 жыл бұрын

Could’ve been worse. Could’ve been baked beans.

Damn you could stand on the stainless steel one without it bending or breaking

@PositiveRateAv

2 жыл бұрын

Also the titanium one

@zlac

2 жыл бұрын

But your girlfriend couldn't!

@soul-om4id

2 жыл бұрын

@@zlac lolz

*Very interesting test and see the real deformation of these materials and breakage is entertaining video.*

Tungsten carbide... so hard, that it is brittle. Nice video!

What material is the hydraulic press made of?

@SithLord2066

2 жыл бұрын

it's made of hydraulium.

@Andrew_Sparrow

2 жыл бұрын

Butter

Lord Elrond: The ring must be destroyed. Gimli: Well, what are we waiting for!? (Hauls in a hydraulic press).

What material that platform is made of? You should test with that material to see which one brakes first: the cylinder, the platform or the mechanical arm.

"Do not repeat at home" Oh man!!!!!

Tungsten carbide is extremely hard but brittle ceramic, tossing ring made from it into the ground will make it shattered. Tungsten metal ring in other hand is a way more superior.

@g0m99

Жыл бұрын

Tungsten carbide is superior because it shatters instead of deforming. It is also extremely cheap, so if it shatters buy a new one.

Tin = Ashtrays to sell Lol 😂

Finally know what I really want for Christmas 🤩

That perfect titanium fold tho 😍

The tin made a bowl for bronze😂

I wonder what material the table and the press tool is made of.. 🤔

@jasmijnariel

2 жыл бұрын

Exactly what i was thinking. Abd how much force it would take to brake them

I didn't expect the bronze to be more resistant to compression than the iron, really interesting.

Interesting experiment, it would be very good to include a table of final values for each cycle and thus be able to fix the ideas of the reader.