Its also available in .177 now, almost a 200% increase in the port size..! I just ordered mine yesterday. Now we just need FX to make us some more barrel choices for .177 since us rockin' the .177's are starting to feel neglected lol

Very nice

I plan on putting this on my .30 wildcat mk3 compact. Will it work?

When you changed your dream tack compact over to the new duel whole transfer port did you use the OE pellet probe or the one that came with the ( kit ) ? As far as I know the pellet probes are only for the impact and are not interchangeable between the impact and fx dtreamline. When I contacted Huma they said the Pellet probes are available on their website separately.

@Airbuks

4 жыл бұрын

Yes I know at the moment they only sell the impact probe , I think they are planning to make them for the Dreamline and crown aswel. For my video I modified my original probe of the Dreamline to match the dual hole opening

@dadge2500

4 жыл бұрын

Airbuks thank you. :) I was going to order a prob but now not for my dream tac but for my impact mk2 this time a set again thank you. 👍🏼

I ordered this and only got the duel hole transfer port and not the machine prod ! ???? Would ask why but may not be answered.

@Airbuks

4 жыл бұрын

The recently ( with the release of the video ) made a kit from it or you can also buy the probe separately. Before there was only the transferport no probe . Did you buy it straight from Huma

@dadge2500

4 жыл бұрын

Airbuks yes I did.

Is the transfer port supposed to come with the Pella probe?

@Airbuks

4 жыл бұрын

Depends when you bought it ? With the release of this video they offer them now in a kit or separately. At the moment the probes are only for the FX Impact , for the Dreamline I modified it myself to match the opening of the TP

Waiting forthe .357 to come out.

I've installed these on my fx impact mk2 and the speed declined, is there a reason for that?

@Airbuks

2 жыл бұрын

🤔 that should not be the case , it’s possible that you have only a small increase but decrease shouldn’t be the case . It is mandatory to retune your gun to get the most out of the setup

Opa boa noite gostaria de saber se você envia para o Brasil se eu comprar

would this do anything for the UK sub 12ft/lb

@Airbuks

4 жыл бұрын

You have power restrictions I believe no ? Maybe the only way you can benefit from is lower reg pressure and maintain the same speed and therefore increase shotcount . 🤔

@bluewater454

4 жыл бұрын

What it does is make you jealous.

Will they fit fx wildcat mk3

@Airbuks

3 жыл бұрын

The TP will fit the barrel , the probe you will have to modify yourself I think

Hi, Would you be able undo the port without a brace? Thanks

@Airbuks

Жыл бұрын

If you hear it long enough you should be able to do it with some basic tools like pliers

@youtubed20

Жыл бұрын

Will give it ago... Thanks!

Do you recommend this upgrade if I am a pellet shooter?

@Airbuks

3 жыл бұрын

It will help , you need less regulator pressure to push heavy pellets and slugs . If you plan on shooting 16grain jsb you can do without

@headcrackersilentsniper9111

3 жыл бұрын

@@Airbuks forgot to mention I am shooting 25cal

@Airbuks

3 жыл бұрын

headcracker SilentSniper for a .25 cal with jsb 34 grain mkii I would install it . I have it on my .25 pellet barrel 😉

@miga2622

3 жыл бұрын

Airbuks what is the max fps you can can get out of the 34 grain, btw are you using the mk2 power plenum. Thanks

@Airbuks

3 жыл бұрын

​@@miga2622 i never went to the max but i can easily get 1050fps .22 34 gr ( yes MKII and power plenum )

yo lo he cambiado y el beneficio con el que trae de fabrica no se nota , no aconsejaria gastarse lo que vale porque lo que mejora es nada

Couldn’t I just use the slug side of my barrel

@Airbuks

Жыл бұрын

Yes offcours, but this was released before FX putted it standard on there barrels

@kickassvideos5469

Жыл бұрын

@@Airbuks i bought a fx dreamline in .25 from krale in the netherlands a few weeks ago, do you know if my fx dreamline barrel also has a pellet AND a slug transfer port?

@Airbuks

Жыл бұрын

@@kickassvideos5469 it should come with in one side the pellet port and on the other side with the slug port

@kickassvideos5469

Жыл бұрын

@@Airbuks thank you for you answer, i figured out that if i take out the magazine and look towards the end of the transferport (the brass part), i saw 2x small holes, one on top and one below on the back side of the transferport, and those hole are the guidance to reasamble your barrel correctly so the airflow holes line up. and if you have 2x of those guidance holes you know without taking the barrel out if you have 2x ports or not.

@Airbuks

Жыл бұрын

@@kickassvideos5469 that is 100% correct 👍

These day's they have masive transfer port not even close to this smal ones...

@Airbuks

2 жыл бұрын

Indeed , that video is also already old and the evolution of the dual transferport has been huge 😉👍🏻

@moekakke

2 жыл бұрын

@@Airbuks However i wonder if they have to be as huge like the new ones from huma. Anyway i just installed them both on my .22 and .25 just to be sure ! ;-) I'm still looking for some extra power maybe by shortening the valverod or the valve adjuster spring... Or more heavy hammer but that is last option.

y el que diga que mejora mucho es porque le pagan por decirlo

@richoperezinho7215

2 жыл бұрын

Vi un tutorial donde solo incrementa 20 fps y subiendo 10 bares el regulador 50 fps,.. como dices no vale la pena..

Maybe it's a hoax because the middle part would cause air turbulence

@Airbuks

Жыл бұрын

Seems like it’s all working fine as so many have adopted this 🤷‍♂️

These are shite fitted didn’t fit right the magazine is a very tight fit coz the barrel pushes too far into the breach and the power dropped from 35 to 30 so lost 5ftlbs the port is too big and lets air past the o ring save your money an drill your own out to the right size

@Airbuks

4 жыл бұрын

Hi john , I am sorry you have such a unpleasant experience with this Huma transferport . By me everything works perfect . I am sure there must be a explanation for this knowing Huma and the kind of detail they put in to there products . Contact me at Facebook messenger or instagram chat and see if we can’t sort this out for you

@jgrimsta

3 жыл бұрын

You are supposed to adjust the barrel slightly and maybe not slide it in all the way to make sure your magazine slides in properly BEFORE tightening the barrel grub screw. It even says so on their website listing this item, it will work properly if you install it properly :)