Пікірлер

• 
  @AlexTheLi0n2 күн бұрын

  I noticed that there are 2 o rings in that package. Did you not need them? Also I have also seen Tungsten hammers for some FX rifles. What’s the difference between the slug hammer and the tungsten hammer it is it just the weight. Lastly why would one select the tungsten hammer over the slug hammer

• 
  @keithfoidel23333 күн бұрын

  Are there FX Pantera barrel kits available at this time?

• 
  @shihabhamad23627 күн бұрын

  Foam purchase link

• 
  @gordy196111 күн бұрын

  Another subscriber from me.... top man. My Mk2 .25 just blew tonight emptying entire cylinder immediately blowing on my cheek like an explosion. I have just upgraded it with slug power kit, slug probe, slug barrel, carbon sleeve etc... Any ideas where I should look first? It was not running full power when it blew. I dry fired it once or twice without any air which I now realise according to the manual I shouldnt have done. 😭

• 
  @yurimillir168911 күн бұрын

  How to order that sir?

• 
  @edwnsoto1812 күн бұрын

  for long range range with slug , which one to choose between FX impact and panthera ?

• 
  @markrhodes547412 күн бұрын

  Excellent informative video my friend 👍

• 
  @sebastiang641012 күн бұрын

  You have o-rings on your liner which means that the carbon sleeve is missing. The 600 and 700 should come with a carbon sleeve

• 
  @trau934614 күн бұрын

  Do you use facebook

• 
  @trau934614 күн бұрын

  Helo

• 
  @the3goats14 күн бұрын

  Thanks for the video. Unfortunately my new-ish M3 started a very slow leak too. Just so happens it's in the same spot as yours. Your video was very helpful. FX should do something about this issue

• 
  @turoceja965816 күн бұрын

  On the stats screen, which BC would you recommend using? BC G1 or AVG BC?

• 
  @TsRide8316 күн бұрын

  The little screw is stiffer in it then the bigger ones

• 
  @FrankFrankfrg16 күн бұрын

  How do you replace the o-ring inside the trigger block. Never saw you address this issue.

• 
  @c.vanlalchanchinmawiachhun562218 күн бұрын

  Did it support rifle?

• 
  @declanhudson988319 күн бұрын

  Mine blew out small o ring came out of valve seat striped it replaced o ring now when i presserise air comes out barrel.

• 
  @TsRide8319 күн бұрын

  Can you change the hammer with out taking the top half off

• 
  @bukawhunter156520 күн бұрын

  Hi airbuk how to buy

• 
  @jasonolsen352120 күн бұрын

  Interesting to see the differences from my Wildcat. Wondering/hoping for a bullpup version, but the the decision on caliber :)

• 
  @user-lo1kw8yl3i20 күн бұрын

  What is the advantage of this new regulator

• 
  @Bruno-der-Problembaer21 күн бұрын

  Hello, I want to fill a diving tank with the compressor. If I use a carbon filter, is it safe or will water and oil still get through?

• 
  @ereknomzer21 күн бұрын

  @Airbuks will a Wildcat Mk3 BT fit into this chassis?

• 
  @PrecisionQuest22 күн бұрын

  Did you ever go to the 300 bar airmarkman bottle? Would like to see how it fits on the Panthera with grip clearance etc. like your videos.

• 
  @johnhernandez597023 күн бұрын

  Very thorough & to the point. Great videos

• 
  @MrRockstar196824 күн бұрын

  What moderator is that?

• 
  @niels08425 күн бұрын

  Nice magazines but the 40gr javelin slugs are still to long for it, 40gr H&N fits fine tho.

• 
  @nuranjumizuhur179825 күн бұрын

  I want that tool but don't have the money

• 
  @ardimadantas181526 күн бұрын

  Essa peça qie voce mostra ela tem pra vender do jeito que esta na sua mao?

• 
  @deeparker610926 күн бұрын

  The "Holy Moly" made me chuckle !

• 
  @ardimadantas181527 күн бұрын

  Olá amigo esse bloco tem pra vender??

• 
  @296757527 күн бұрын

  Is it possible to have a folding stock on the back instead of the tank ?

• 
  @thanh1089028 күн бұрын

  The gun still adjustment macro and micro after install hammer.I heard someone said can’t adjustment if install heavy hammer?

• 
  @peashooter95029 күн бұрын

  Just got this for my Epic Two, CUZ the original regulator seemingly do not like adjustment, CUZ i have not done that a whole lot in the 3 outings with the rifle. And for my last outing the regulated pressure was 200 BAR and not the 90 the rifle was set to.

• 
  @Mesut_Usta29 күн бұрын

  Again a good video. I love watching and following.

• 
  @Mesut_Usta29 күн бұрын

  I watch it with pleasure and I like it. You should just try it to see.

• 
  @Mesut_Usta29 күн бұрын

  I think I woke up the topic.😂

• 
  @JuanGomez-mz5fsАй бұрын

  I did eactly what you said and I still have a slow leak.

• 
  @raulsotolongo8839Ай бұрын

  My fx impact m3 does not The plenum charges me and flows through the barrel

• 
  @KingLoopie1Ай бұрын

  Thanks!

• 
  @luckymike3065Ай бұрын

  Cheers brother fox. Mighty helpful.

• 
  @TheHmongKTАй бұрын

  without the lens is it work?? the eagle vision side mount work for insta 360 Ace pro?

• 
  @TheHmongKTАй бұрын

  without the lens is it work?? the eagle vision side mount work for insta 360 Ace pro?

• 
  @michaelpehl9923Ай бұрын

  It is a beauty ❤ I love it. Great 👍

• 
  @ccdmainАй бұрын

  where is the regulator then?

• 
  @surreallife777Ай бұрын

  My FX impact Mark II should be arriving this week. I noticed that this magazine does not have a plastic cover don't you see an issue with dirt or debris getting in there and causing issues? I looked up the stud magazine which is very good but I don't like the Aesthetics of it and then there's the ballistics Central magazine designed by Ernest row and I was told that FX has also upgraded their magazine. What's your opinion of these other magazines compared to this one that you reviewed?

• 
  @lbtn1Ай бұрын

  Hey bud, the last gauge that you put on, is it any different than the other gauges in the gun?? I heard it is shorter in depth, would that be right??

• 
  @lbtn1Ай бұрын

  I realized it’s the brass spacer I’m missing, where can I order that part from??

• 
  @greg105Ай бұрын

  Hi. Very good video thank you. I have a new mk2 crown also in.22cal. I noticed your power wheel is the new version like mine. Do you have any problems with it coming loose from rotations. Mine comes loose easily.

• 
  @oppgoblin1358Ай бұрын

  can u still shoot regular pellets with the slug power kit

• 
  @thommytomАй бұрын

  I have my V2 since yesterday. Thing is acting crazy, registering +350m/s without me shooting. Apparently it registers the effective shots well (+- 278 m/s with the FX 18 grain pellets). App is the Android version.

• 
  @mace8873Ай бұрын

  My shooting buddy and I have been using them for a couple of years now, I had no idea they were _that_ big, but I guess that explains how they can keep their prices lower than our local gun dealers. Oh, and congrats on your Nordic Wolf, it looks as good as it sounds.🙂

• 
  @angelussudАй бұрын

  Your silencer is Eagle Vision Sigma M4 ?thanks