My father in law Donald worked for that mill on the green chain. Even after getting very sick they worked with him until shortly before he died. They treated him well and our family appreciates it. His grand son just watched this video with me a few minutes ago and was able to see the position Grandpa worked in action. I have some of the leathers he wore as he pulled chain. Thank you for posting the video for us all to see.

@ROTAXD

5 жыл бұрын

MAKAROVOWNER sorry for your loss. It's great that the little guy got to see what his Grandad did.

@almedinz1

5 жыл бұрын

American people is truly hardworking people in Europ we are just love to think that about as but truth is my first conclusion. Sory for bad English.

@abeljaimes8165

5 жыл бұрын

O 9

@fatimahusein2424

5 жыл бұрын

Please will you tell me why they throw the trees in the water

@nurmayuni4044

5 жыл бұрын

MAKAROVOWNER iiiiiiii

EXCELLENT VIDEO. I had the pleasure in 1996 to watch very large and LONG logs go through the mill to be used for some of the reconstruction of the USS Constitution. The logs were gathered by a local So.Or. logger from the forests of Jackson Co. Those timbers are now on the deck of that great old ship. Thanks Hull and Oakes for your help in this Great Project.

@behindthewallsleepin

4 жыл бұрын

That's awesome!

I drove out to the mill on March 14, 2018... still cranking out big timbers. Way to go guys!

@wipeout-jo3vx

5 жыл бұрын

Bob Frazier I just have one question you say you you don't like an

@carlossergiovalerio976

5 жыл бұрын

Nnkkp 1ijikkkm KkkuyhghjjjjjjjjjhzdjdskKk

my dad worked for this outfit back in the late 70s, was a certified lumber grader. I worked at Ochoco in Prineville during the late 80s. Payed a lot better than what my peer group was making at the malls in bend and even working in those stove and spa stores that became so popular in the 90s. I worked most of the positions in an average sawmill/planer, and really, though it was boring most of the time, it was a pretty dang good occupation, as I needed lots of money to support my delights ... motocross ... water skiing... all that stuff we fellas spent our bucks on back before them stupid eye phones. sheesh .... the 'digital' age .... dont any of the guys buy 9mm handguns and sano hunting rifles and way, way too many tools anymore?? Great upload, brought back a lot great memories. Like when the KingPin fell out of the carriage on the 50thou lb forklift. I happened to see it when I set the two loads down on the planer chain. Good thing too, that might have made a mess, having the carriage fall off of that thing. nuff outta me. :-]

@gregorymalchuk272

3 жыл бұрын

Does this mill have steam engines or a steam turbine?

@williscunningham3109

Жыл бұрын

Question... I want to know why do they put the logs into the water? Is it because of logistics and storage or something else?

@woodduck

Ай бұрын

​​@@williscunningham3109 It's to soften the bark to make it easier for that older style debarker. Modern debarkers can do 11-18 logs per minute with dry logs.

I used to live in Monroe, and went to a private school that the owners of this mill helped keep running. We went to a field trip here. It was quite the experience. I don't live too far away, and do plan on visiting again.

Back in 75 through 78 I worked in a saw mill just like that! Pulled green chain, tail sawed, ran the dry deck! You won't find these old saw mills around these days, but when you did, they separated the men from the boys when it came to who was not afraid of hard work and who was! This brought back some great memories.... Thank you for posting this as now I can show my son and a few others what it was like to work in a saw mill back in the day before automatic green chains where pulling 110k board feet of lumber with 6 guys in an 8 hour shift was something to be proud of! I can recall many the cold winter nights, working in 10 degree weather wearing nothing but a t-shirt and steaming like you were a smouldering human torch! Ah yes, the "good ol days"! Mills that stored their logs in the river or ponds (the one I worked at stored them in the river) those logs soak up a lot of water and out on the green chain, everything was heavy and the one by stuff was like pulling wet noodles! We pulled the dimensional stuff to, "cants" If I remember correctly, all the way up to 12x12 inch some at 18 to 20 feet long. A couple of weeks pulling those got you in shape! ;)

I only can imagine the wood smell.I love that smell.it's bin a long time since I've been in saw mill

@kevinmencer3782

4 жыл бұрын

I used to live just downwind of a small lumber mill. Smelled so good during the summer.

@davidglaum2538

4 жыл бұрын

bicanroman The smell of wood is part of why I love working with it.

I worked for Pope & Talbot up in Portland for 7 years and I used to try to learn everything I could about lumber mills. I came across this mill in a video back in about 2006. I was mesmerized just watching it. Thank you.

I’ve hauled lumber out of this mill almost 20 years ago. Som of the best looking timbers I’ve ever seen come from there!

I've thoroughly enjoyed watching this.

thanks for the tour. I have driven by that mill many years ago when I lived close. I grew up in the lumber inustry and worked there myself in a couple of different mills in Albany. thanks again

Brings back memories. My first job out of high school was a logging/lumber mill operation. Hard to believe that was over 50 years ago and there are still mills in operation.

@stephenross1937

4 жыл бұрын

Jim Dudder yup, I’m with yah. I was a logger and a lumber inspector back in the early 70s

This has made my day best video of mill work ever ,I'm looking out at the snowy landscape outside my window and wish I was young again and could still do this work,Strange the things a man wishes for I once couldn't wait to retire ,now I wish I could still work ,this getting old ain't for sissies achecs pains and bullshit!!

@StormReefProductions

5 жыл бұрын

It's comments like these that make a positive mindset for a 35 year old like me feeling bad sometimes working so god damn hard in the rain. But you also earn respect. Michael I hope you have a good day tomorrow and enjoy it.

@mikemagnum7987

5 жыл бұрын

I had the same thoughts my friend and I sure do agree with you about being retired along with the aches and pains.... God Bless my "brother of the mill"....

@RogerDiotte

5 жыл бұрын

Myself included, I'm going back to remote Northern Ontario shortly to get back on the trains.. I started working young for the railroad up there in no man's land and yearn to be back up there whilst I still have a few more good years to pull it off! Cheers to you buddy, you've gave me inspiration...

@lylealexander7810

5 жыл бұрын

Michael Richter z

@TheRealCheckmate

5 жыл бұрын

I hear that, Mike. I'm 70 now, and still doing the kind of stuff I did at 35, only a lot slower and with plenty of aches and pains. I loved this video... old school at its finest, and it's still working after all these years!

Pretty cool looking mill. That’s definitely a different way to send lots into a mill for sure.

I've been here, years ago. My father Dale Luke was an outside sales rep for Capital Industrial Supply in Salem, he used to call on these folks. Awesome.

i worked in sawmill my favorite job i think ever.started stacking lumber jumped up to debarking in a cab with ac heat and stereo.was great ended up a sawyer running a big bandsaw cutting boards

Old school beehive sawdust burner. Got to love stumbling across these and knowing that there used to be a mill there.

Fascinating. Never actually seen a sawmill in operation before. Good video.

I worked at the stud mill in Pondosa, Ca. near Mc Cloud at Mt Shasta. We still had a Tepe burner there and I loved the smell of the wood and the fire. The work was hard and fast and the whole crew lived in the mill town. This captures the feel of the place and I sure thank you for hanging in with those guys to shoot this. Thanks for the memories.

My grandfather and grandmother grew up in the Monroe / Alpine area back in the 1880's and my grandmothers family, the Hortons who were loggers, used to bring logs out of the coast range with oxen ( I have pictures). I am a truck driver out of Coos Bay and back in the day when I was flat-bedding, I went into Hull-Oakes to pick up some loads. The guys that worked there were really great people. I think that the world needs places like Hull-Oakes to keep our sanity. May I be so honored to throw back a shot of whiskey and a beer chaser in memory of places like H-O's. Gerard Houck/Horton 😎👍

That's interesting to learn they operate a mill in addition to running a logging crew. A few years back Hull Oakes was logging an area I deer hunt. One morning I was getting ready to leave my pickup when a guy pulled up to the gate and offered me a ride to the top of the hill. I appreciated that because it's 2 miles uphill to where the hunting area starts. The guy was really nice, and the crew did a professional job. They added gravel and rolled the road when the job was done and made it perfect. Seems like a top notch outfit. Thanks for the video.

@1neAdam12

Жыл бұрын

Whoever their feller is, his hinge wood kerf is perfect.

@asymptoticsingularity9281

Жыл бұрын

Be careful out there. Have you ever seen the movie Deliverance?

@1neAdam12

Жыл бұрын

@@asymptoticsingularity9281 Ever walk in the wrong side of town after dark, in any city across the US? Yeah, I'd much rather be deep in Appalachia anyday.

@SamSeth

Жыл бұрын

@@1neAdam12 Considering this is from Oregon, he might have a valid point. The weird shit just gets more weirder

@SamSeth

Жыл бұрын

@@asymptoticsingularity9281 well i left out the part about the bloodybuttstuff at sunrise, sorry to ruin your fantasy

I loved watching that boatman. I would like to see more about it and how it worked.

I worked in this mill for 3 years and it was an experience. It reminded of the gyppo mills my Father worked at as a young man supporting a family. Yours truly pulled green-chain and did pull 4x12 to 4x16. It's good work, the people are good but doesn't pay much! I have worked in lumber mills for over 26 years and wouldn't change it for nothin'. I liked it !!

There are Picnic Tables in Benton County parks made from single planks cut at Hull-Oakes. They're roughly four inches by four feet by about ninety-yes, ninety-feet.

My name is Rosie (Swanson) Kelley. My daddy Donald worked for y'all for a few years. Thank you so much for posting this. I really enjoyed watching it. I also thank all of y'all who came to daddy's funeral in 2009. He always talked about y'all as family. Again thank you for posting this. Brought back lots of wonderful memories

@ROTAXD

5 жыл бұрын

MAKAROVOWNER ma'am, sorry for the loss of your pop. If he worked with guys he considered family, he was a lucky man. God Bless.

Reminds me of the mill town I grew up in.... Toledo Oregon... saw this type of activity all over Toledo, we had 3-5 mills in operation when I was growing up.. awesome thank you brought back some great memories

@jamesfenton7338

5 жыл бұрын

Toledo smells better since the pulp mill stopped operations, considered moving there in 1998 when I worked in Newport south of the bridge fixing vehicles. Lived in Florence and drove to Newport every day, made some money, and decided my employer was a complete jerk, so, I went to work for myself and been working that way ever since. Beware any employer that thinks farting in front of customers is funny, Lenard thought farting in front of customers was hilarious. His only talent was clogging the toilet, he thought that was funny as well. I might long for the old days, until I remember Lenard, than I come to my senses.

Spent a many days running the edger, railing and running the bandsaw, stacking lumber, stacking squares and running the chipper. Back breaking work but taught me the value of hard work. My dad is still a Sawyer on a 60” circle saw at that same mill. God bless him.

Awesome video! This is the best walk through of the lumber mill process I've seen.

I am a Canadian. Many years ago I read a true story that was published in a well known magazine about a Father and Son family owned lumber mill such as this located in New England. The Owners, realizing that times were tough and work scarce, had taken out an important but low dollar contract that had a penalty clause that stated that the order had to be processed by no later than New Years Day. If the order wasn't complete there was a financial penalty that essentially removed all possible profit, maybe even causing a loss. Although the mill was going through some hardship, the mill Owners had promised their employees a full week of holidays from Christmas through New Years. There was lots of overtime worked but there had been some setbacks and when the workers went home on Christmas Eve the order was not yet complete. More than one worker offered to stay on and work a few hours more but the Owners said a promise was a promise and though their offer was appreciated, Christmas was for Family, and sent them home. The next morning, Christmas Day, the Son of the Owner Family received a phone call from the local Sheriff. It seems that to add insult to injury the mills gates had been broken open and he wanted the Owner to come down and see if anything was damaged or missing. When the Owner arrived, he was dumbfounded with what he saw and moved to tears. There was no damage nor was anything missing. Instead, what the owner saw was a mill in full operation. As it happens, every one of his Employees had shown up for work on Christmas Day to complete the order. You see, they knew how important that order was. They knew that the cost of not completing that order would be a great financial burden for their Employers. They knew that their Employers were honest and decent men who were not getting rich and that they looked on their workers as Family so out of respect and yes, love, they decided to move Christmas day to a day later. So now, in these troubled times, you, as an American, might want to think about this story. The people are what made America what it is, not some blowhard with a bad haircut making empty promises and making his rich friends richer. Maybe it's time for Americans to stop their petty bickering and work together as a team, as a Family, to take back their birthright from those who will take it all away if they can.............

@southernstar4353

5 жыл бұрын

Very moving story, definitely different time qith different caliber of people. You sacrifice yourself for a company now and they will just take advantage of you. There is no more teamwork. Only greedy hand wringing financiers looking for every last dollar and gdp percent. I hate sometimes i was born into these times with very few honest people left. Thanks for that story.

@clydemcgeary3084

5 жыл бұрын

Whole story very moving. Dedication & teamwork, family &respect. Last paragraph is 100% spot on correct.

@donnebes9421

5 жыл бұрын

Scooter Tramp ok, right. Good luck with that. Just recently a few Democrat politicians, in reference to President Trump’s “Make America Great Again” slogan during his 2016 election, have come out and said America was never that great. I know in my 61 year life I have worked with a lot of great people, and there’s a lot more great ones I have never met. But when you have the politicians elected to represent our country, and putting it down wholeheartedly to the world, and the average person not being heard, there is not much that can be done. To hell with the politicians that don’t support our great country. They are only there to line their own pockets. And to hell with any other person on the planet that also thinks the USA is not great.🇺🇸

@4.9copblank49

5 жыл бұрын

Take your anti-Trump comments and cram them.

The debarker looks absolutely medieval. I love it!

@johnulmer6715

10 ай бұрын

Yeah, it looks like an old Nicholson A3. They were beasts.

That is too cool! Amazing the amount of moving parts, chains, gears , bearings, motors etc. Awesome timbers there at the end!

There was the wreck of one on the other side of the Trent River by the Howell tracks in New Bern... As kids we played in the sawdust silo... Looked like a giant rusty Tee Pee with a screen on top... Huge mountains of sawdust everywhere..... Awesome video!

Wow what a great old sawmill glad to see it is still going.

@bigbearfuzzums7027

5 жыл бұрын

My inner bear honks your nose!

I thought that looked familiar. I worked there in the late 1970's as a diesel mechanic. Lots of simple ways to get killed in a mill. This place had them all.

@wysoft

6 жыл бұрын

including workers wearing no hi-viz clothing at all. I didn't even see some of them in some of the shots until they started moving.

@Herbolator

6 жыл бұрын

Decimus

@Herbolator

6 жыл бұрын

LegendLength

@mikemagnum7987

5 жыл бұрын

The one I worked at back in the 70s was bigger, but just like this one and you are 100% correct about the number of ways a saw mill will kill you if you are not paying attention! I had a couple of close calls while tail sawing and there is no excitement like the kind generated when that big ban saw about 8 feet away doing 3500 rpm or so, hits a rock that the tree log being cut grew up around! The teeth flies off that saw blade like machinegun fire! ;)

@Mercmad

5 жыл бұрын

I did too, I was chief engineer in a mill in New Zealand ,when I started there we were cutting purely native timber , with twin circular saws each 5 feet diameter. The mill was stripped and rebuilt with the same size carriage and a 9ft diameter head rig band saw . In the first few days of operation the new saw ran a bearing .Watching a 9ft diameter wheel wobbling is pretty exciting , then once we got her running again we had a large pine come through, half way through the log, the band hit a singer sewing machine that the tree had grown round! the band broke in half and shot out across the mill like a big steel snake!.

The logs are stored in the pond until they are processed to keep the wood from cracking and reduce the bugs that will bore into wood. The quality is also much better. Our local saw mill uses a sprinkler system to keep the logs wet.

@johngorman389

5 жыл бұрын

Thank you for answering my question, I know back in the day the companies would float them down stream but I didn't know they were stored in the water until use. Very interesting, thx

@timmy8768

5 жыл бұрын

But the logs would be wet and heavy to cut

@VenturiLife

5 жыл бұрын

Does it make the bark any easier to remove?

@rickylaunay9009

5 жыл бұрын

Tom Emard ù€ Pour

@thomasreed6122

5 жыл бұрын

Tom Emard it might keep the bugs from boating into the logs but I bet the mosquitoes would eat u up.lol. I’d say that pond stinks bad with that old black water, whenever we get water standing around on our job or out the skid road with brush or chunks of wood laying in it when it gets black it smells like a pig pin.lol

Great video. I used to see many huge trucks hauling timber while living in rural Washington state. Now I know where these timber went. Amazed to see such a large operation with so much automation. Hope this mill will stay forever!

Beautiful. Mill workers rarely get the respect they deserve.

@stevet8121

6 жыл бұрын

As someone who works in a sawmill in northern CA, I thank you.

@markn.reprisal9472

6 жыл бұрын

Really good ones don't need no stinkin' re-spect. We got SELF Respect!!!

@zaijiezhu6303

6 жыл бұрын

Bob Frazier ho

@welshpete12

6 жыл бұрын

Highly skilled , highly dangerous work !

@alexbourgeois7863

5 жыл бұрын

I’ve worked in 2 sawmills. I know how to run 2 kinds of resaws and 2 kinds of edgers and many many other things. They are much harder than they seem and much more physical. Especially at 9,000 feet an hour cramped in a tiny mill

I live in Medford and we need these industries to come back. High skilled work and lower lumber prices! Either that or we can all sit and watch it burn. Right now we are surrounded by a dozen fires burning and can't really go outside. Bring back sensible logging to Oregon.

@thomream1888

5 жыл бұрын

Amen. And in Kali, too.

@barrythacker7281

5 жыл бұрын

Trump is raising tarrifs to bring it back. During the last Bush term George did away with teriffs here at the ME Canada boarder, in exchange for millions in his personal bank account. Our country has been sold, and Trump is buying it back. The same goes with steel if we can not afford to buy it we will have to make it again, this makes us stronger in the long run.

@ROTAXD

5 жыл бұрын

Chris Beard first you've gotta get rid of the nutcases in portland & seattle.

@josephastier7421

5 жыл бұрын

Logging is coming back thanks to the bark beetles. I'm seeing logging trucks on the California roads for the first time in decades. Both the logging companies AND the environmentalists want the dead trees out of there.

@josephastier7421

5 жыл бұрын

@@bacilluscereus1299 The environmentalists don't make money from the catastrophe, they have only said that the dead trees should go. Otherwise you're going to have a whole forest of dead and dry Christmas trees waiting for an excuse to explode.

I've sent logs to a lot of mills between the Cascades & the Appalachians, but never a steam driven one! Just fascinating!

Great places, they don't get recognition , we all tend to take things for granted not realising how much hard work goes into mills and how much of a dangerous place it can be... Lovely to see work going on , may got bless you with more work for many more years to come ...

Watched with ingress, pulled green chain 10 years . With a double cut head rig, &a single cut pony I'd would given my eye teeth for a day this slow. Was a great video .

@echohunter4199

Жыл бұрын

Ugh, pulling green was everyone’s first job at the mills in Klamath Falls where I grew up, you get one hell of a workout yanking soggy scraps, lol.

@grantwalter6811

4 ай бұрын

Pulled green chain and was a boiler man in the summers at a mill in the PNW that had 2 steam shotgun head rigs. We averaged 80,000 board feet per day cutting 4 quarter pine 5 quarter shop. Milled closed 30 years ago. That pond is way too slow! Still is the smell of fresh cut.

When I was 17 used to be the one pulling the trimmings off the line from the main saw and putting through the trimmer. There was a big belt behind me a twin blade trimmer to my left. The controller to the right and in front of him a big circular cutting blade.

@gregorys6838

4 жыл бұрын

Why do they put the logs in the water, float them a small ways and then take them back out again? Instead that tractor taking the logs off the truck and then tossing the load into the river should unload each log and place it right on the conveyor belt. What am I missing?

@user-yw8sr3uj1w

4 жыл бұрын

Say that again?

@gregorys6838

4 жыл бұрын

@@user-yw8sr3uj1w Why do they put the logs in the water when it appears it isn't necessary? Do the logs need to be wet before cutting?

@royreynolds108

4 жыл бұрын

@@gregorys6838 Keeps the logs from drying out and splitting and washes dirt, rocks, and mud off the wood which plays havoc with the saw blades. The logs are easier to handle in the water than on land.

@gregorys6838

4 жыл бұрын

@@royreynolds108 Thank you. In that one image, it was like they put the logs in the water and then took them back out again like 100 yards down from the point of entry into the water. Seemed odd to me. Appreciate your response. Be safe.

Awesome. Very good video. Most of the Saw Mills are gone here in Southern Oregon. When I was much younger had the chance to work at Spalding & Son Lumber for several years. This brings back memories. Glad I found this video, made my day. Thanks

I enjoyed every bit of that video I too worked in a saw mill for many years starting on the chain and eventually making it to the log yard and getting to run the boom boat and log stacker I sure miss those days. Great video

Beautiful machinery !

Fascinating. Very glad I watched that. Keep it up y'all!

I lived about 2 miles from that mill for 12 yrs. BEAUTIFUL area and mill. There is a nearby park with a Table cut from a single piece of tree that is over 50' long

Nice place. I just love to see all those great lumber coming off the line!

That was impressive..just sitting thinking.THE LAST ONE in the USA thank you for keeping this alive and for sharing. Take care.

@elbob248

5 жыл бұрын

Not the last one. Check out Mr. Shoptaw here on KZread. He has videos of the Phillips Brothers sawmill in California. Good stuff.

That little boat looked like a blast!

As a 18 year old, I worked for ITT Rayonier, in the pulp and paper mill in Hoquiam, Washington. My job that summer was working on the log rafts moving logs to the wood mill chipper crane with a bumper boat. We used 15 foot pike poles and the boat to sort out the logs and position them for the crane. Working the swing shift on the Chehalis River was the best job I had in the mill. We had a floating lunch shack out in the river that you couldn't get to unless the boat came to shore to pick you up. We wore caulk boots and ran on the logs just like my grandfather had done 60 years earlier.

Love that little log boat, I want one. I have been a great fan of steam since I don't know how long. Got a book I got in 1975, and was a fan long before that.

awesome brings back good memories.bigger more modern and we had no pond love to work there

Fantastic video, great area too.

I was an Apprentice millwright here when I was younger for 3 years. When I mixed to priest river idaho as a 4th year Apprentice they couldn't believe the skills I had acquired, I was instantly jumped up to journeyman millwright wages within 4 weeks.

If ever I need wood for a big project, I'll do what I can to support this mill. Old steam mills need our support and honestly it's just amazing how they do it. I can't recall how many time's I've marveled at the engineering prowess of our ancestors.

WOW now that is a Sawmill!

@diegoopena6221

5 жыл бұрын

Reel McCoy .

This is one of the coolest videos i have seen in a long time.

@kuanhoong3018

5 жыл бұрын

Badmlinton of hong kong

@kuanhoong3018

5 жыл бұрын

Badmlnton òf hong kong

@kuanhoong3018

5 жыл бұрын

B

The tug job was to feed the barker , the ring barker is where the log went through the round spinning thing , the barker feeds the single cut saw , he will turn the log into a square that is called a cant , that will be fed into a gang saw , so if the cant is 12x12 it comes out of the gangsaw as 6 2x12, then saw saw blade that was getting sharpened , is a double cut saw cuts a board off the side in both directions , I loved the smells and sounds of a mill spent 10 yr did a little bit of everything

I always wanted to go back in time to when sawmills were steam powered. By the looks of the pick up trucks, my truck fits the bill. I've missed my calling. Thanks for the vid !!!!

Not only is this interesting and informative - your video production quality is excellent.

That's what I want to hear! Actual sounds of something being made.Finally! Thanks.

It is great to see a good old mill operate, It looks like they have great logs and a skilled work force thanks for showing us this video

Great photography, good picture of the operation in 15' - no chatter.

How I ended up watching this will forever remain a mystery...but very interesting =)

Similar set up like Rogers Lumber Company Inc. in Camden, Arkansas. Boiler room and all. Nice operation

I WAS THE LEAD AT DOUGLAS COUNTY LUMBER COMPANY PLANER DEPT. IN THE 70'S. WE PUT OUT AROUND 280,000 BOARD FEET OF DOUG FIR A SHIFT. ANYTHING FROM 2 X 4 X 6' TO 6 X 14 X 26'. IT WAS A JOB! I WAS IN GOOD SHAPE BACK THEN lol

I live the smell of fresh cut lunber. Thank you for the tour.

Great video. I worked in a mill in the mid 1970's. A lot like this one but it was all electric - we generated all our own power from wood waste...

@daletreadwell1914

5 жыл бұрын

Joe Burks

i can only imagine the amount of maintenance needed in an operation like this

@user-jb8gn7hx4m

5 жыл бұрын

ดู​หนัง​แอ๊กชั้นอินเดีย​

@user-qy7td6ky1z

4 жыл бұрын

มาได้ไง

I’m still trying to decide how I feel about that little boat. It leave a lot to be desired. If fact, I don’t understand putting the logs in water to begin with. I guess it makes the bark come off easier and gives the little boat a place to be. lol! I used to buy loads of the outer shakes (their term) from a local mill. They were $8.00 a pick-up load back then, $12-15.00 now I think. They are great to build with and make gorgeous walls. Basically barn wood, used indoors. Great video Mr. PH, thanks for sharing a tour of this fascinating old mill ! 🇺🇸

Pretty awesome operation ! Amazing how that machinery tosses the big heavy logs like they are twigs

WOW, that brings back memories, I worked in a mill very much like that one.

@achikshah8254

4 жыл бұрын

/+akak@lqjajska? Jsan?

excellent thanks..

AWESOME video! Really learned a lot about the inner workings of a sawmill. Would've liked some text overlays depicting the types of wood being dressed and trimmed.

I was blessed to go thru the mill while they had a man riding the carriage, missed going throw it when they were still a steam mill Looks like a nice job on the new carriage for sure

I remember that green chain alright. Then went to the planer chain. The work was faster there. That was in Port Angeles, WA in the 1970s.

This guy is the master of all bumper boat competitions.

Hey Peter Thank's for taking us along!! great video

I live just up the road! Cool to see this on KZread! Good work guys!

four products come from Hull Oakes wood chips, 2/4s, specialty lumber, and railroad ties with Hull Oakes saving the best log cores for last to be turned into railroad ties.

@jackparker7347

4 жыл бұрын

How long does it cut? Is that the longest cutter in the world? 85 feet?

@geomodelrailroader

3 жыл бұрын

@@jackparker7347 can't answer that each log has its own size.

Excellent use of a tripod and camera that is obviously not a telephone too.

I saw that mill when I was a kid. Still remember the shaking wood floors, screaming saws and loved the sweet smell of fresh cut lumber. Had uncles and cousins who worked there and one of my cousins married one of the Hull boys. Check out the 1941 picture of the Hull and Oakes crew on their web site history. Four of my uncles are in that picture and another one of my cousins sawed the Doug Fir deck support beams for the restoration of the of the USS Constitution "Old Ironsides" in the 1990s. Have yet another cousin who still works there last I heard (saw him on another You Tube video). Thanks for the memories!

Thank you for this shooting. I learned a lot. Not common (in Size) in Switzerland.

Considering its age, it is astounding how efficient it is. Those board cuts were lightning-fast. 3 guys just on that portion of the process. I'm impressed. Ive been to modern mills where they've eliminated many of those tasks and I'm not a fan of those. This place actually employs a few people. Huge Fan!

Doing green chain board slogging sucks no matter if its a top mill or steam..My back hurts just thinking about it. Very nice video btw

@markwhite1780

5 жыл бұрын

puncher davis my dad who graduated from high school in Bend in 1935 said working green chain was the hardest job he had in his life. Combat in New Guinea was easier and almost more safe, not SAIF.

@davidj.7779

5 жыл бұрын

What's "green chain"?

loved the video i worked in a saw mill 40 years ago with a similar set up without the steam best hour spent in a few days

Really cool tour and overview, thanks for sharing!

the little boat never gets abused

Its so cool how they unload a truck in one lift. thats insane

Great video thanks for sharing this with us Peter, milling has always been an interest of mine

Can you imagine listening to that for 8 - 10 hours a day?

I found this guy through another video and ended up watching all 15 mins and I was like man I feel kinda lame and realized 5 million other people seen it too!

@lukasparo194

5 жыл бұрын

Chalupa batman definitely being seen by way more people than expected because KZread’s pushing it in the recommend videos after anything from Katy perry music videos or how to cook rice in five easy mins lol don’t feel bad

@lukasparo194

5 жыл бұрын

I hope this guys monetized haha

Peter Great work would love to watch more video's and longer, regards joe Uk.

A great video. The hard work, and coordination of the workers is great. I would imagine the amount of maintenance needed to keep everything going is ever constant. With everyone working on computers all day long, it's rare to see physical work like this.

nice video! I worked in a saw mill in the Northeast in the late 70's early 80's as one of my first real jobs. started in the green shed and soon ran the resaw/edger , debarker, end trim saws then the head saw which was the best with all the hydraulics , air power and Electric power at your fingertips not to mention the foot pedals on the floor to operate. pretty much a lost art now with Big Corps. running everything by computer and little manpower.

This is most definitely not “ one of the last “ steam operated saw mills. In fact just about every saw mill or just about any plant, factory or foundry you see is “ steam “operated. Most saw mill is fire/steam operated because they use the millings to fire their boilers. There are probably 10 companies near Huntsville, Alabama alone. I’m a non- union boilermaker and retubed several of them in the Tennessee, GA, AL area. By the way, they absolutely suck to maintain and repair.

@eggos5074

Жыл бұрын

is that because of the sap and other issues associated with burning freshly cut down timber?

@JohnSmith-yv6eq

10 ай бұрын

@@eggos5074 Probably because the working conditions are brutal...as are most mill managers... always pushing production and "making do and mendking" at frantic pace in order to increase profits. Have a spare boiler to slip in already retubed while we get the other one out and do that? Not happening...do it all in situ and I don't care if it's still hot get 'er done.

This place looks like OSHA's worst nightmare. And I love it.

@elonmust7470

4 жыл бұрын

They wouldn't like how nobody ever gets injured from all of that dangerousness!

@jayyoung5423

Жыл бұрын

I saw lots of electric motors, where exactly does the steam come in to play?

@kellyroxanagomezsanchez

Жыл бұрын

R4

Maravilloso, una gran empresa!

Wow, Peter, your videos are impressive! You have so many talents..