Looks like a good solution for what you'll be using it for, I'd like to see an update after you've used it a few times! Thanks!

@toolman101476

Жыл бұрын

I’ve used it for years trimming houses and it’s been flawless. No issues , no broken parts…. The pins can be easy to misplace but 5mm shelf pins work as well. He’s made a few updates since Richards version.

You know it’s golden with that “Whistle of approval.” This tool accessory, was awarded two!

You win the award for the world’s most efficient/convenient miter set up!!! Can’t wait to see what you add next

You are the man Richard. I always love this content and seeing the gyms you find. Only the Lord knows how many tools I’ve bought because of your videos

Nice mention of the miter clamps, I bought 2 the other week. I dont know if many DIYers buy these but they feel legit high quality. Love the recommendations and tips!

Love this channel. The grin on your face as you were taking a look at everything was so genuine. Made me laugh because I know that feeling.

Man your love for tools is contagious brother. You’re the best; God bless you

Man that's a beautiful set up, I love my tools and care about how they operate but I love how they look and anyone who takes pride in their work also take pride in their tools.

Look like a awesome addition to any miter saw !

Frigging awesome dude, I could use that fence myself. Thanks for sharing.

Looking forward to those many “update” vids and to see this on your first jobsite when using it😉

Pretty cool setup. And it looks really solid.

Another great video! Thanks Richard 😀

Love your work, man. Just installed my first beam setup in my living room. Can’t wait to trim it out with crown.

Made by a fellow trim carpenter, I'd say its got a good chance of performing like think it will. Guy had need/problem, went to work and solved it.

Killing it with the videos lately!

Very useable and a nice add on and easy and quick to install. If you don’t want it on there all the time.

Trim carpentry for me is like golf. Some days I measure well and cut well. Other days I'm back to the saw three times for One piece. Thanks to channels like this and others, my work has improved. But my standards for my work are high enough that I rarely achieve my own standards. LOL Thanks Richard.

Great jig! In the 20 plus years that I've installed crown, the lack of fence height requirements for handling tall crown was always an issue. The ability to preset your cutting angle will save a lot of time.

The whistle of approval!!!

Nice fence! If I wasn’t retired and still in the business I’d be getting one! As for those plastic tabs, get yourself some dowel rod the same diameter as the hole and cut up a bunch and throw them in a container. You’ll always have enough on hand.

It looks like a well made tool. Hopefully it works as good as it looks.

Never thought of trim carpentry as a near superpower until this skilled guy. Total earner with unlimited work prospects in DFW.

Wow! Looks like a DeWaulkie! Well done man.

That looks sweet! I wish one of these companies would just make an entire fence for the saw.

Congrats on the 400k! Fence looks clean!

" nothing wrong with having a beautiful tool" yep, I been saying that my whole life.

Great review, thanks Richard

pretty cool. Can't wait to see it in action.

Awesome tool your channel rocks keep them coming

We all nit pick with probably every tool we buy, but the ideas are good with this add on. Will be interesting to see how you use it.

Those plastic things are invisible shelf pins (meant to slide into a saw kerf) and are available from lots of suppliers.

Really enjoy video ... I have a question which tip do you use on your graco x19 for interior paint ?

I would definitely be down for the upgrade 🔥

Look forward to see it in action.

Great addition. I can see how losing those plastic stoppers could be very easy, especially during transport to and from job sites. Just have some dowels or something similar, handy.

@toolman101476

Жыл бұрын

They are easy to lose…. I ended up gluing a small plastic case to the back of the fence to place them in.

It matches so goot to the yella of the day and red of the cut hub. Very cool.

I just ordered mine!

This is absolutely a great addition to a miter saw , how does it retrofit a festool I’m wondering thanks for your time

Love your work man

Nice stuff! How does your saw perform when you bevel at 45 degrees? That high fence seems like it would get in the way of the drive system?

Love ur work. Did u make the back fence for ur chop saw or did u buy it is so where can I get one they need to come out with universal ones .

Nothing wrong with a beautiful tool 😉

cant wait to see the next video on how those new crown stops work for you... i wonder why you couldn't put something permanent (like a nut and bolt) into the slides (instead of the plastic pieces)... because slides remove (and tighten) very easily (from the looks of it). ... you definitely have my interest on this one, my crown stops are always in the way, thats pretty much why I use two chops box on most of my jobs.

@toolman101476

Жыл бұрын

The holes are 5mm holes so any shelf pin fits the holes. The reason you wouldn’t want something permanent is having the ability to remove it quickly to cut other stuff is a nice benefit

Yellow and red...is that a DeWaukee fence? 😏 Very nice.

@chefsteven34

3 жыл бұрын

Spot on, for that observation! I love it.

Looks like another way for me to spend money. My 2 favorite things to do are spend money and buy tools.

@LucifersDeathSquad

3 жыл бұрын

Can you spend some money on tools for me Papi ?!?!?

@Ichabod_Jericho

3 жыл бұрын

Sometimes people use tools to do things but I use tools to spend money

@borys444

3 жыл бұрын

R u one of those ppl who own the same tool but only on 3 separate lines?

@garyK.45ACP

3 жыл бұрын

Seems like those two things go well together.

@natemartinez4595

3 жыл бұрын

Good thing those go hand in hand

nice set up man likes your videos u awesome carpentry!!

Congratulations on your new toy!!! Love the videos man

Very cool!

Can't wait to you use it 🤩🍻🍺😊

Just get another saw lol!!!!! Great video!!!!

I wonder if those slider rods would fit on DeWalt’s older line-powered slider ? I haven’t been able to find replacements.

“Ain’t nothin wrong with having a beautiful tool” came right off the tongue 😂

@Yellow.Dog.

3 жыл бұрын

"That's what she said!"

Clever solution to a genuine problem. Having to reset the jig is a hassle. I can see manufacturers integrating this into the machines soon.

Do those holes fit shelf pins? You might be able to get replacements at any big box store.

Great idea with the crown stops. I see this going further like with better stops that could be bigger and magnetic. they need a fine tune screw on top to dial it in or guys will go back to drawing a line on the fence. How about indented ruler on fence for setting up crown stops?

Pretty badass enjoy it

What's up Richard. Thanks for sharing man. Vince from VCG CONSTRUCTION would really appreciate this beautiful tool too. Nice to see you on the livestream today. Love the Dewalt set up, have you got a vid on how you set it up. Anyway I thought I'd drop by & say hey from New Zealand. ✌🏾😃🤙🏾

Drill the holes on the T slot out to be the same size as the pegs for cabinet shelves.

Would these impede fence travel for making bevel cuts? I'm thinking they wouldn't because they're attached to the stock fence and would slide with them.

Where's the link for this? I could def use this at work.

Super looking fence. Drill a small hole in that plastic stop. Tie some braided fishline to it and attach other end on back of fence. Then you can just flip it over the fence and NOT lose it.

Looks like it will work great. Just wondering why he would not set the holes where it will give you the zero clearance. Or at least have a elongated hole so you don't have to drill your own holes.

damn! i gotta get one now!!!

Wow like your videos amazing with the things you get

You should do a review on the Botond Crown Stoppers, I would like to see a Video on that, thanks...

Nice video and cool tool. I'll have to check it out

@vaughnmaurt5013

3 жыл бұрын

How?....he doesn’t post the link

Hey Rich how do you like using the Kizen compared to your other jigs. Thanks

Do you know if this will fit the Milwaukee 12” mitre saw??

Pretty cool fence set up, though the, "John's doing casing and I'm doing crown" is as simple a fix as setting up another miter saw station (yeah, you'll need another miter saw). You'll be amazed at how much time you save by not having to reset the saw for your task or having to wait on John making a cut. Casing doesn't need the CutHub stuff, just an accurate saw and a stable platform (stand). Really kinda of surprised you haven't gotten two stations going on the larger projects.

@ShaneHolly

2 жыл бұрын

Thanks for the bitch session

It would be a good idea for the creator of this fence to use metal clips then add a magnet somewhere to keep track of them.

@rc9831

3 жыл бұрын

Fence is Al- not magnetic

@Dougie19Fresh

3 жыл бұрын

@@rc9831 no, I get that I’m saying make the clips out of a metal material that would be magnetic.

@rc9831

3 жыл бұрын

@@Dougie19Fresh You idea is a great one. Sure to be misplaced a number ot times.

Why the compound saw when you always nest? Very thorough and high quality looking attachment..

Looks well made. Does it fit Milwaukee saws?

I was saving money while you weren't posting videos and now I'm broke. Edit: Not really but I would love to have your setup.

Thank you great show

You should redesign your DewAukee shirts to say “MILDEW” 😄

I wonder if shelf pins would work instead of plastic

definitely know what my next purchase will be. lol

OK Richard I have a question, do you know how to cut crown laying down on the table?

Thats actually really cool tool. I love your videos man. It would be cool to work with you and be one of "the guys" :D

Also plastic is good for those little spacers so it doesn’t dent your trim.

looks sweet

I’m finding the extended angle fence is loose in the track, have you used it yet? Do you clamp it to the fence?

I wonder if that fence is on the way for the bevel

The plastic stops for the crown if the holes is 5mm or 1/4 you could use a metal cabinet shelf pin. It looks a lot like a blind shelf pin.

@toolman101476

Жыл бұрын

5mm

Did you switch back to dewalt miter from m18? I have a 12” m18 constantly calibrating it and just doesn’t seem as accurate as a dewalt

You might try brass shelf pins for the plastic clips replacement.

@danielkarifrancisco2987

3 жыл бұрын

That's a really good idea. It looks like they may fit

What saw stand do you have?

Awesome 👌

Those look super nice! My DWS780 had a fence that was concave, probably 170⁰-175⁰. Enough to not let me get good, accurate miters. I ended up cutting the fence in half and shimming one side coplanar with the other. I'm sure yours is all good or you'd have noticed

@williamdyer4431

3 жыл бұрын

I have the same problem with my Flexvolt and have no idea how to fix it. any advice?

Very cool

Game changer

As a finish carpenter that does a lot of crown; you'll get great usage out of that fence...Hope it helps make money for ya...

The day you get excited about a fence LMAO 😁

I would love to use it.

awesome!

Bro, your miter saw station is going be worth more than your truck soon! Hah! Love the product showcase videos... Thanks for sharing!

Love it

Fence looks awesome. Will shelf pins fit in the holes?

@KizenEnterprise

3 жыл бұрын

Yes 5mm pins