Such an easy tutorial as you explain everything. Other people just put it on and say stuff but you show us, thanks. Cant wait to get a Camaro and come back to this video😂

@FollowMyLine17

7 ай бұрын

Thank you! Glad it could help!

Good looking wing, loved the detailed instructions.

@FollowMyLine17

10 ай бұрын

Thanks!

Glad to know there’s another zl1 in Minnesota. I’ve only seen 1 other and it was a convertible

@c4sare4kiddos

10 ай бұрын

What color was it

@Mikeselchow

10 ай бұрын

@@c4sare4kiddos it was black. I have the radiant red tint coat

@FollowMyLine17

10 ай бұрын

There is a silver convertible in the Waconia area too.

@Mikeselchow

10 ай бұрын

I see mustangs,chargers & challengers all day. It’s nice to see that Camaros are harder to come by

@c4sare4kiddos

10 ай бұрын

@@FollowMyLine17 I have the satin steel vert, diff state tho. There’s so many different gm silver” paint codes tho so it’s hard to tell even for me, lighting ppf cleaning etc make it look different where I confuse it with some ppl online/ irl who have the different paint codes of that silver or gray. I think I have never seen Arctic blue or silver or whatever they call it irl on any trim and that’s it.

Lools good, glad mine came with this! I like the black post on the stock one better than the carbon fiber post. I might just be use to the stock version but the carbon fiber post look out of place.

@FollowMyLine17

10 ай бұрын

I love the carbon posts on this wing, but I think I’d take one either way!

I've been thinking about adding this wing to my ss

@FollowMyLine17

9 ай бұрын

Do it! You won’t regret it.

@fearless798

9 ай бұрын

@@FollowMyLine17 did you have any issues with extra holes in your trunk ?

@FollowMyLine17

9 ай бұрын

@@fearless798 well we added this wing to a ZL1. You said SS so I a regular SS should use the same holes. If it’s an SS 1LE, you’ll have a bunch of extra holes, and then you’ll have to drill the new ones for the ZL1 1LE wing.

Great video. Having done this myself, a big warning is to not drop the nuts into the body of the trunk lid. You can do this by taping the socket to the nut or lowering the lid enough that they will fall free. Otherwise, you may have to fish them out with a magnet.

@FollowMyLine17

9 ай бұрын

Great call out. I think I had it in the original cuts, but it didn’t make the final video. I did use a magnet to grab the factory nuts out and put them on.

@RacingforALS

9 ай бұрын

@@FollowMyLine17 Knowing is half the battle. 😁😁

Additionally, 50% iso alcohol works better than detail spray for removing adhesive and is paint safe.

@FollowMyLine17

9 ай бұрын

I was using a plastic blade and the eraser wheel to remove the adhesive, so I wanted more lubricity. I actually hit it up with IPA as a final step before I installed the new spoiler.

I have an LT RS I want to put the same spoiler on it but I don't know how to cover the holes left by the previous spoiler. What do you recommend?

@FollowMyLine17

2 ай бұрын

The best way is to try to find a trunk lid without a spoiler or with the standard SS, or ZL1 spoiler from 2018+, which has the reinforced braces within and have it painted. 2016 and 2017 do not. Otherwise you could have a body shop fill the holes. Otherwise you could just use some plastic plugs and paint them to match: amzn.to/3JyQsbE

Can you tell me what the dimensions of the screws in the mounts are?

@FollowMyLine17

3 ай бұрын

Which dimensions are you referring to? Each screw in each post, or from post to post?

Does anyone know if you could put this wing on an rs?

@FollowMyLine17

7 ай бұрын

You can put the wing on anything. In the video I show you how to use the indexing post. Does your RS have the post spoiler, blade spoiler, or no spoiler?

Did the new wing come with adhesive tape? And to loosen the old wing adhesive what did you use?

@FollowMyLine17

6 ай бұрын

The new wing came with adhesive foam. To get the old stuff off I used a plastic scraping blade and a 3M adhesive removal wheel attached to a drill.

hey... forgot to show the roof top rear view camera view before and aftere wing install. Great video, nevertheless. Cheers.

@FollowMyLine17

9 ай бұрын

With the camera angle all the way down, on the furthest out camera view, you can see the wing. In the mid setting, you can barely see the top of the wing at the very bottom of the mirror, and at the closest zoom setting, you can’t see the wing at all.

Nice job and nice looking wing! What did it do to your rear view camera view?

@FollowMyLine17

6 ай бұрын

Zoomed all the way out, you can see the top of the wing across the bottom third of the screen. Mid zoom it’s just barely across the bottom and zoomed all the way in, it’s not in view at all.

@P-Dawg-01

6 ай бұрын

@FollowMyLine17 OK awesome! Thank you for the info! Did the new wing have 3M adhesive to secure as well as cushion the supports of the wing to your trunk lid?

@FollowMyLine17

6 ай бұрын

@@P-Dawg-01 it came with foam tape

I would like to put this wing on a convertible ZL1. Any suggestions on what to do with the wing mounted camera that comes on the convertible?

@FollowMyLine17

3 ай бұрын

Wildhammer sells a 1LE style spoiler with a camera hole in it. It is made by EOS, so it’s a bit different than this one, but in 2019 the rear view camera on the ZL1 1LE was in the spoiler itself. If you use the wildhammer link in the description, you can then search the shop for it.

@appel199

3 ай бұрын

Awesome. I should be taking delivery of my 2023 rapid blue ZL1 convertible very shortly. The only thing it's missing is the performance data recorder. Any suggestions on a good one with camera I can add? Thank you very much.

@FollowMyLine17

3 ай бұрын

@@appel199 this is an older video but many of the items are still current. Links for everything in the description too. kzread.info/dash/bejne/eXuDtdB7mszIp84.htmlsi=8E-VKrgGrhozbJiD

@appel199

3 ай бұрын

Thanks. Just so bummed that one PDR option is not on the car. But really looking forward to getting the car. tho.

@FollowMyLine17

3 ай бұрын

@appel199 ​​⁠stay tuned… I’m working with some folks on an OEM retrofit option. Late 2024 hopefully.

I got the regular ZL1 to avoid the ricer looking wing.

@FollowMyLine17

2 ай бұрын

Ok

@the_terrorizer

Ай бұрын

Ricer????? Son you're stupid

Is your original spoiler for sale

@FollowMyLine17

6 ай бұрын

It is not for sale, sorry

It’s a ratchet brother, not a wrench

@FollowMyLine17

8 ай бұрын

Thanks for clarifying.

@Benny0910

8 ай бұрын

@@FollowMyLine17 you’re welcome, keep up the awesome content!