I love that wink you did a great job to that car I've been with your Hawaiian family for a long time since the old pickup I learned a lot from watching you keep up the good work

Sounds like quick jack needs to recall their lifting blocks, those should support the weight indefinitely.

That's one bad ass Camaro, good taste in your builds. Watching from conyers Georgia,🇺🇲I agree I love the sound of a v8🤠 I don't think I will ever drive an electric car.

Spacers with your current wheels. The wheels you have on the car now look fantastic!

As a 1LE owner, I fully support the 1LE wheel idea! By the way the car looks absolutely beautiful!

@LonestarHawaiian

2 жыл бұрын

Thanks, super jealous of the 1LE if you can’t tell yet 😅.

@LS1424

2 жыл бұрын

Also a 1LE owner....I would go with the 1LE wheels

I love how the Camaro looks I’ma have to buy one before they get discontinued, and the stocks would look sick wider with the spacers.

Wing looks amazing! Great job. And glad your ok. Been watching and following you for quite some time. Content is never disappointing. Always looking forward to the next vid!

@LonestarHawaiian

2 жыл бұрын

I appreciate it! Mahalo 🤙🏽

we run 33.50 30 R20 in the rear on a 12" rim, 47mm off set and 295s in the front on a 10' wheel 25 mm off set

@LonestarHawaiian

2 жыл бұрын

Thank you!

Spacers with ZL1 wheel and wider tire…..spoiler looks amazing

@melroneatkinson9835

2 жыл бұрын

Just wider tires no need for spacers unless he go skinny in front

@LonestarHawaiian

2 жыл бұрын

Mahalo!

Looks badass!! You should install a mini split on your garage to keep you cool and warm

@LonestarHawaiian

2 жыл бұрын

I need it! Lol getting a little toasty in the office 👌🏽

The Camaro looks and sounds awesome brother your fleet looks great

@LonestarHawaiian

2 жыл бұрын

Much appreciated

Really good looking car! Excellent build! It took me too much time to decide which wing to get, then finally opted for Victor racing one and I am amazed with the look and performance.

Of course the wing looks amazing! Now it's time for that big cam and all the other motor upgrades this winter? Bought all my engine upgrades from Katech, currently at 824 RWHP.

@LonestarHawaiian

2 жыл бұрын

I can’t even imagine. 650 blows the tires off through 3rd gear… I need better tires AND THEN more power 💪🏽

Been watching since you started! Always good work!

@LonestarHawaiian

2 жыл бұрын

Awesome! Thank you!

I have a ZL1 1LE and the 325s on back are great, I put Sport Cup 2's on my car and it is good in rain and great in this Texas heat as I am in Houston. I just put a F1 Interchiller in my car and it is the best mod I have done so far as my IAT's are getting in the 40"s now and I gain about 4 degrees of spark. rather than lose 8 degrees from over 150 degree IAT"s. In this Texas heat you can gain over 100HP from the IAT pulling spark and you gaining 4 degrees, You take the currant heat exchanger out for the supercharger and I added a 2 gallon Synergy tank in my driver fender well that I insulated for the freezing coolant as the coolant gets down to 36 degrees at the inlet of my supercharger and I have the 2 gallon of surge for a 1/4 mile run. IThis car never stops pulling so I do not even know how fast it is. It breaks the tirs loose in 4 of the 6 gears. its a 2018 so manual trans.

@LonestarHawaiian

2 жыл бұрын

You have a monster on your hands good sir 🔥 sounds amazing

Just need some chop with that deep exhaust! And still wondering why you haven't reached atleast 100k yet?! Crazy

Car looks awesome. I enjoy all your videos. Do yourself a favor and insulate your garage doors. Did mine last weekend and was surprised that it dropped temperature inside my garage by 15 degrees from outside.

Eh Hawaiian all your mods you do to all your vehicles is epic I enjoy them a lot. Have you ever watched one of your fellow you-tubers Goonzquad, from Tennessee? I seriously think they need an OG's perspective on a vehicle they are trying to rebuild, it's a wrecked 1967 Camaro that suppose to have an LS 1 engine in it but when they picked it up from auction the engine was stolen and replaced by a substandard one. Heck the motor mounts, hoses etc... wasn't even hooked up. Tell me what you think about these 2 young men. Looking forward to here what you think. Stay safe out there. Aloha from Kansas

@LonestarHawaiian

2 жыл бұрын

Been a fan of theirs for years. I started watching back when they bought their first wrecked ZL1. They are doing big things, stoked for them.

Faster, higher, stronger!

I say keep the ZL1 wheels, and go wider. It's a beautiful car

@LonestarHawaiian

2 жыл бұрын

Thanks!

Or you could just use the Quick Jack's ONLY for lifting and lowering. Use the jack stands to support the vehicle. It's not worth the risk.

looks Awesome God bless enjoy and keep the great videos coming

@LonestarHawaiian

2 жыл бұрын

Mahalo!

Sounds mean looks mean keep it up man😈💪🏽

Love it.

Spacer with wider tire wheels look great

Keep wheels. Do spacers. Make sure they’re hubcentric

Cool video, love the car shots towards the end. Love the garage too! I would keep the ZL1 wheels. I'm thinking about powder coating mine gloss black.

@LonestarHawaiian

2 жыл бұрын

🤙🏽🤙🏽 thanks for watching!

Base wheels wider tires and spacers. Would love to see it

LOOKS SICK 👍👍👍🌶️🌶️🌶️

The wing looks awesome ✊Mine is coming any day. I ordered it for C7 carbon fiber.They took a few months but it’s cheaper than $5,000 GM one.

Does it block the rear view camera?

You ever thought about a widebody kit. I saw one bolt-on for the ZL1 and man I fell in love with the look.

@LonestarHawaiian

2 жыл бұрын

It’s so dang wide as is 😅 hardly fits in the 3rd garage bay… but I’d be lying if I said I didn’t want to build a wide body 🔥

Sounds awesome. does it sound different in person how is the drone. I'm thinking about ordering the axle back touring.

@LonestarHawaiian

2 жыл бұрын

No drone on my end. Love the catbck. Was a lot louder than I thought it was going to be as a "touring" exhaust. Couldn't be happier.

What year is the ZL1?

love your wang wing bro i try to intall mind next week i buy from next gen speed

Use the 1LE wheels. I think they look so much better and black on black looks great.

Hello, love the car! I have a 2018 ZL1 and I got the 1LE wheels but got them in 20's with 315's in the back. Also I thought u might like this idea I have them hydro dipped in carbon fiber. They look really good and they match all the other carbon fiber that I have on the car.

@thuggerjackson5986

Жыл бұрын

Where did you order?

I run 5mm front and 3mm rear spacers on mine and while not it's quite enough to be flush it's the best you can safely do, while also keeping the front & rear wheels similar distance from fenders. If you wanted to go any wider than 5mm and you'll need to replace the studs with longer ones, which isn't a difficult job. It's on my to-do list personally. Potentially could run adapters (believe 20mm is shortest they sell), but it may be too much for these cars.

@LonestarHawaiian

2 жыл бұрын

Great info. Thank you!

@DelCalloway

2 жыл бұрын

@@LonestarHawaiian Welcome! Looking forward to seeing your progress with the car

Did you use new 3m tape and remove the old factory tape?

@LonestarHawaiian

Жыл бұрын

If I remember right, the new wing came with new 3M tape. I had to clean off the old residue

That movement really worries me. It took me more time to make sure i put the jack stands right for the first time on my camaro than it took me to install my side skirts.😅

Glad you are okay! Have you paint corrected and ceramic coated the ZL1 yet?

@Boobtube.

2 жыл бұрын

i believe he did, search his videos.

@LonestarHawaiian

2 жыл бұрын

Not the ZL1 just yet. It’s on the todo list!

@Thesheriff1776

2 жыл бұрын

@@LonestarHawaiian looking forward to it!

I would take those rubber blocks and throw them away. Use something that has been around a long time. *Wood* get some 2 X 6's and screw several together if needed, for different thickness. Wood trumps rubber in this case.

My vote is spacers and stock wheels. Take the left over money to snug that suspension down to the tires a little bit more. Maybe 1” max. Lose the small gap and small spacers would be perfect

Intro song?

The ZL1 Addons pinch weld JACK MAGPAD is your problem, its not safe in my opinion. If you compare it how your car jack attaches to the pinch weld vs this adaptor it has way too much play and not lifting the car on the frame. It instead only lifts via the pinch weld, which will tip over very easily.

1le wheels all day!

Awesome Great videos keep them coming 👏👍 Have you watch oneroad videos?

Use a 2x6!! Wood is the best product that absorbs and forms to the metal!!!

Spacers, but get the borla wheel spacers. Spoiler looks 👌

Id have gone for a spoiler or aileron like in nascar and gun metal grey or flat black rims with the body color of cherry red tintcoat. Still though, looks sexy! 😏👍 Lovin my TrailBoss in Cherry red tintcoat! 😍

Hahahaha every time you hit the go fast button you get this psycho look in your eye… GET IT !!

@LonestarHawaiian

2 жыл бұрын

100% also incredibly addicting 😅

What happened to the video for a minute?

Display the other wing in the house. Lol.

With u living in a hoa I’m surprised they haven’t kicked you out with the vehicles being so loud

These wheels arent bad but i think it would look better with different wheels

I’m going with the r888r 20 30 315 plenty of tire. It’s always good to have two sets of wheels. those 1le wheels and the front canards will Complete your 1le transformation. I love my Camaro I got the 6 speed as well.

Friggin HOA

@blackonblack...9244

2 жыл бұрын

I hate my HOA as well. They're crap.

@nicholasmarshall3881

2 жыл бұрын

Fortunately I do not have an HOA. I couldn’t imagine paying for someone to tell me what I can and can’t do with my house.

First!!

Keep ZL1 wheels and wider tires.

No spacers might look good but if you plan on driving the car hard I wouldnt

Wheels. No spacers

Put volks

Your videos are getting shorter and shorter.