best zeroing guide on thermal scopes. direct and to the point. Thank You.

Very informative and easy to follow zeroing guide. Well done guys 👌

Excellent tutorial video

Very nice video

I installed this optic on a crossman 760 air rifle.I have now shot the riffle around 500 times during target/plinking practice, and the kzread.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope has done well.With this optic, I have neutralized around 30 pigeons that were invading one of my buildings.For my short range air rifle, I will continue to use this scope, but will be upgrading to a more powerful scope, when I buy a more powerful air rifle, in order to shoot at longer distance.For the money I have spent, this scope has truly been a great buy.

Si señor ahora si que si meto las flechas en el centro muchas gracias .

Great video!

Hi, ZEROING YOUR SCOPE, would this procedure also apply the same to bolt action 22 magnum. like your video, thank you. (Bathurst NSW)

Is the "One shot zero" software the same for any thermal rifle scope?

Good video👍🏻👌🏼

@angeloriva3956

2 жыл бұрын

Français ! Merci !

OK ! SUPER MERCI !

Muito bom meu amigo me tira uma dúvida como faço pra tirar a imagem congelada na tela da hickmicro thunder th 35 obrigado

why the thermal resolution is so poor, like below 144P?

Who can help me, I have downloaded and installed the firmware v5.5.38 but there is no possibility to reset the Thunder35 as in the video it remained the old way, advice and thanks in advance

@edhalson3154

2 жыл бұрын

I have just upgraded mine and this was the procedure I got from HIKVision. ______________________________________________ This from HIKVision as follows : Please follow the steps below on how to upgrade your device: 1) Disable hotspot function then connect the device to your PC with cable (I took out the batteries!) 2) Turn on the device and open the detected disk, copy the unzipped .dav file and paste it to the root directory of the device. (There is only a folder normally showing DCIM so paste into this spot unzipped). Once pasted turn off the sight but keep it plugged in). 3) Hold the power button to reboot the device, and the device upgrades automatically. The upgrading process will be displayed in the main interface. During the upgrade, make sure the device is connected to the computer or connected to DC power or powered by the full battery. Otherwise, it will cause unnecessary upgrade failure, firmware damage, etc. 4) The upgrading process will experience twice upgrading process and would be continued for over 20 minutes. Meantime it will stay at the “Upgrading” for a while in the second upgrading process, so please be patient during the upgrading. Besides, it’s also recommended to use HIKMICRO Sight to upgrade the device remotely. For the specific description of this function, please refer to the related documents of HIKMICRO Sight. _______________________________________________________ Hope this helps! I was a little confusing and did take some time but it is worth the agony! Good Luck E

@domenicocassano1683

2 жыл бұрын

@@edhalson3154 Thank you, you are very kind, I solved it by writing to Hikvision from my country Italy, the file was present in the European site but it was corrupt and then it was sent to me by email and I solved it. If anyone needs the europe firmware write it to me, greetings to all.

Who can help me: zeroing the sight, at magnification 1x, every point of correction on X (or Y) axes, how many MOA it corresponds ❓ thank you 👋🏻

@user-sw2ng4wu1g

11 ай бұрын

Теж дуже цікаво. Знайшли відповідь?

Using different reticle choices does not mean you have a different point of impact. You can chose whatever reticle u like without having to rezero.

Non ci sono tutorial in italiano ?

Talk about Hot Air...

Very nice video