Maybe I’m just not the brightest person, I have watched a lot of these wire harnesses videos over the last week and your video just made my life a whole lot easier. Thank you! I’m putting one on a buggy but I’m guessing it’s just about the same, hopefully anyways. Thanks again.

@brokemexicanreviews

Жыл бұрын

Glad I could help brother… Do me a favor and subscribe. This channel is all DIY content… Anything from home repairs to anything with an engine.😤 my IG is in the bio also.

@donmckinnon9282

Жыл бұрын

Question , Handle bar switch , two sets of wires 2 pin starter button and a6 pin …. My question is the wires much match in the 6 pin from the handle switch to the harness? Asking because all my Color’s are there ; just not matching up . Only spot . Starter button isnt an issue . It cranks . No spark . Everything tests out fine New electrical all around

@brokemexicanreviews

Жыл бұрын

@@donmckinnon9282 Yes wires must match. There is a 5 pin and and 6 pin connector in the front...They both look like 6 pin connectors...but one only uses 5 pins. I am actually working on another build and have the harness on my kitchen table. If you have instagram or Facebook I can send you a pic to show exactly what to look for. Something else sometimes these Chinese wiring harnesses dont match perfect...I have had to move individual wires inside connectors to make them match.

@brokemexicanreviews

Жыл бұрын

@@donmckinnon9282 Also please make sure to sub. Thank you Don. Feel free to ask more questions.

@donmckinnon9282

Жыл бұрын

So…..

The only person who did it clearly. Thanks bro 😎

@brokemexicanreviews

3 ай бұрын

Thanks man. That means a lot. Please make sure to subscribe.

Quality video. Very informative!

@brokemexicanreviews

Жыл бұрын

It’s a long video because it is literally step by step. Almost impossible to do it wrong if you just follow the video. Thanks man.

The best ! After a lot lot search, your presentation is clear, and complete. Mii de multumiri din Romania ! Foarte buna prezentarea, de la inceput si pina la sfirsit. THANK YOU !!!

@brokemexicanreviews

10 ай бұрын

Thanks man. And no problem. Please make sure to subscribe. Would definitely help the channel. All products I use in my videos are linked the description.

Great video, helped a lot 👍

@brokemexicanreviews

Жыл бұрын

Glad to hear bro. Please make sure to subscribe. I drop a bunch of DIY and Quad content.

great vid I guess i'm going to need to watch every 110 cc/small quad vid 100 times cause I'm just got one and i plan to play with it wreck it rebuild it repeat.I appreciate the straight forward yet clear explantion

@brokemexicanreviews

9 ай бұрын

This video has more views than any of my others…I’ve gotten at least 30 DMs on IG of people thanking more for doing this video. Please make sure to subscribe. Thanks man.

@Random.Adventures.

9 ай бұрын

​@@brokemexicanreviews on 30:16 you wired in the kill switch. Anyway to bypass this is it really needed for those that don't care about the safety aspect. I thought by not plugging it in would have been the bypass

@brokemexicanreviews

9 ай бұрын

If you do not wire it in place it will be bypassed. The brake will need to be installed or bypassed in order to achieve spark though.

@Random.Adventures.

9 ай бұрын

@@brokemexicanreviews was wondering would you be able to do a clear video similar to to this but with a twist just showing the essential wiring needed and how to wire an atv basically cdi, to stator with kill switch and start. no headlights, no rear lights no alarm just enough to drive please and thanks

@brokemexicanreviews

9 ай бұрын

The wiring videos take a long time to film and edit man. If you have an IG i can send you a pic of the bare essentials to wire a quad?

what a good video dude

@brokemexicanreviews

11 ай бұрын

Thanks brother please make sure to subscribe.

PERFECTLY EPLANATION 🤘

@brokemexicanreviews

Жыл бұрын

Thank you man. Please subscribe. I’m uploading a lot of content on DIY’n 4 wheelers.

i have an eigtheen coil stator and could not find a wiring loom to fit that so i ordered one with another stator.going to become a six coil stator.just hope it al fits

@brokemexicanreviews

2 ай бұрын

Eighteen coil stator😂😂…please update me on how it goes. I’ve never worked on a quad with a stator that big. Also thanks for the comment and make sure to subscribe.

Or can I connect the 2 wires together for a kill switch the 2 prong

That was great, thanks so much. My rear tethered kill switch wire broke off right at the switch, I'm wondering if it can run without this switch being connected or do I need to order a new one? Also the green ground wire and the negative battery cable are together so I gather both of these loops go onto the negative battery post? I've never encountered a double ground/negative cable before... I hope you make more videos.

@brokemexicanreviews

Жыл бұрын

You’re welcome man. Can you please make sure you subscribe. I try to drop at least 1 video a week….I do believe you can run without the kill switch being connected(must be completely disconnected). If it is connected the button has to be activated. As for the green ground wire and negative battery cable…they do go onto the negative battery post. It’s important to have a good ground on the negative battery cable…if you do not the thin green ground will melt and fry your wire harness(trust me lol)

@wandajames6234

Жыл бұрын

@@brokemexicanreviews Wow thanks so much! I have subscribed. Cheers!

@brokemexicanreviews

Жыл бұрын

No problem and Thank you!

Quick question in the link you shared for the new wire harness I noticed that's for a 8 winding stator coil which is for a 125 cc ...well today I was able to remove the stator finally however mines is a rxl50 viper a 50 cc and also have a 90cc both have a 7 winding coil ...would a 8 winding coil work on a 50cc ?

@brokemexicanreviews

Жыл бұрын

8 coil stator I posted was for 150cc quad. 2 and 6 coil stators are used on 125cc and smaller Chinese quads such as TaoTao’s. If yours has a 7 coil stator you have to replace with a 7 coil stator because there are other parts you would have to change in order to make that stator compatible. I know for sure that electrical components would need modified/changed between 2/6 and 8 coil stators . I would replace with the same 7 coil stator. So you don’t have to heavily modify your quad.

Connecting to the battery the black is negative obviously . But there is a green wire bundled with it also. Does this terminal also connect to the negative on the battery? Or somewhere on the frame.

@brokemexicanreviews

7 ай бұрын

I believe you are talking about the ground that goes to the negative terminal… If you have IG and can send a pic, I can tell you exactly where it goes.

Your right bro! Got my ladys little 4 wheeler, from maybe some 'shady' folks (um. key switch gone, starter switch wires hanging, etc. Ran for a while & just died, when another boy dogged it out) got me a new harness & all the goodies, just tryna figure this china s--t out🤔oh yea, it's a coolster 110 & was a lil bad ass when it was running 😁

@brokemexicanreviews

Жыл бұрын

That’s bad ass bro. I have multiple videos for 125cc and under…complete wiring, carb, throttle…everything. Let me know if you need help with anything. Also please make sure to subscribe to this channel and follow the IG I use to post quad builds I finish. Thanks!

So what would happen if I bought a harness for a the stator that has 2 windings, and I got 6 winding stator, will it still work if I cut the connectors and connect them?

@brokemexicanreviews

Жыл бұрын

Magnetos are different. Your spark wont function correctly or at all. You can reuse your current 2 coil stator and hard wire into harness by matching wire colors and using crimp/butt connectors. Make sure to subscribe brother. Thanks.

Yo I got a whole new Chinese wire harness for my extreme machine 90cc it’s basically like a Polaris 90cc but it’s had a button for the choke for carb on old wire harness my new one doesn’t… how do I fix this?

@brokemexicanreviews

Ай бұрын

I’ve never done a Polaris. If the harness works why not just make the choke a manual choke?

Hey, I seen your Shockers t-shirt in one of your videos, are you anywhere close to the wichita area...ciuld use some wiring help

@brokemexicanreviews

8 ай бұрын

I am in wichita. My IG is in the description. You can DM me there…assuming you have IG.

My bike don’t have a safety release So do I need to wire in a on and off Stwich to the 2 prong for a kill stwich

@brokemexicanreviews

7 ай бұрын

Do you have IG or Facebook. I’m confused…maybe you can send pics?

I have a 125cc coolster my frame is longer than a 110 do you think this harness is long enough also my battery is in the back thanks

@brokemexicanreviews

9 ай бұрын

It is a very tight fit on the larger frames… But I have done it just leave the zip ties loose and you can adjust as needed after everything is installed. If you have trouble reaching any cables… you can splice in and add an extension with crimp connectors using the same size wire. I have yet to find longer harnesses that work for these. I link everything in the description on these videos. Please make sure to subscribe.

My wiring harness melted, and I have put a new one on, it wont start, if I didnt hook up the kill switch, will that prevent it from starting?

@brokemexicanreviews

6 ай бұрын

Kill switch only kills spark. If it is not connected it bypasses the kill switch. Do you have spark?

I did everything correct and I still have no spark? do you think my it's my magneto ?

@brokemexicanreviews

7 ай бұрын

If you have IG you can send me a video of how you have it wired and I can probably help you trouble shoot it that way.

I have it all running but not getting spark. I think I don’t know what to splice the safety relese/ kill switch too I don’t have one using the wiring on a 110cc dirt bike what should I do

@brokemexicanreviews

7 ай бұрын

You can disconnect the safety kill switch and it will do nothing. Same as bypassing it.

@midori8952

7 ай бұрын

@@brokemexicanreviews how do you disconnect it to bypass it ? I fully rebuilt the harness twice and I think I missed what you spliced the safety or kill switch with I don’t have one on my 110 cc dirt bike what should I actually do I can’t get spark

@brokemexicanreviews

7 ай бұрын

Your don’t have to connect the kill switch. Leave it disconnected, hold the two wires together and if everything is connected correctly you will get spark. If you have IG or Facebook you can send pics or videos and I can help that way

What colour are the two wires you hold together that bypasses the brake lever being pressed so you can test start?

@brokemexicanreviews

Жыл бұрын

There is a green and yellow wire on the front of the wiring harness. Hold those two together to bypass the brakes. Make sure the key is turned on, make sure the starter is good, and if the kill switch is on the back, make sure it’s fully seated or disconnected. Please Make sure to subscribe. I drop a bunch of DIY content, tool reviews, and quad content.

@d0b0b

Жыл бұрын

@@brokemexicanreviews thanks for the quick reply. This is my job for the weekend.

@brokemexicanreviews

Жыл бұрын

No problem and Heck yea…please make sure to subscribe! Thank you

@d0b0b

Жыл бұрын

My harness arrived today, fitted it and no spark... Doesn't seem to make any difference if I connect two black/green wires at the front or not, starter just turns with no spark. What colours are the safety on? I don't have one but maybe splicing those would help?

@brokemexicanreviews

Жыл бұрын

@RjS Make sure all your connections are tight. Make sure the key is turned on. If you have a kill switch in the back make sure that is fully seated.I typically bypass the brakes before I connect the hand brakes to check for spark. I have ran into bad handbrakes before. I leave the safer switch off so I don’t have to worry about it. If it’s disconnected you don’t have to worry about the safety switch being bad

Wonderful video very helpful you left out one thing when you told us how to bypass the safety switch on the brake parts you didn't clarify what color the wires were or which ones they had to be connected to bypass that I'm not knocking your video I'm just helping you out by letting you know that so you can edit it again thank you

@brokemexicanreviews

5 ай бұрын

Very good point. Thank you for the feedback. I appreciate it and other will appreciate it also. Thanks again and make sure to subscribe.

@RADVIX313

5 ай бұрын

so what color are they...

@brokemexicanreviews

5 ай бұрын

Green and black. They are the longest wires that come out the front of the harness.

@RADVIX313

5 ай бұрын

@@brokemexicanreviews thank you, I actually found your reply in the comments. Just finished wiring a atv for my younger brother to mess around with in the backyard. Props to you for still replying to people, subscribed.

Hello how’s it going I followed all the steps added new battery and new starter do you know by and chance why only the starter is clicking and not engaging the starter itself? Even after everything is new

@brokemexicanreviews

8 ай бұрын

If you have IG can you send me a video? If you don’t have IG, It sounds like maybe the battery is dead?

@kyrelparker2328

8 ай бұрын

@@brokemexicanreviews what’s your instagram

@brokemexicanreviews

8 ай бұрын

blancojackey is the handle…link in description in this video also.

At 30:30 what did you cut and splice? I think that's causing me no spark too

@brokemexicanreviews

Жыл бұрын

That is the kill switch…if you don’t have it connected it will still fire up. I rebuild and resale these things…I typically leave these off. If you do have it connected it needs to be fully seated…for the issue you are having I would just leave it off/disconnected for the time being

Can you give the website to order the wire harness for Chinese atv I have a adly moto c250 I think

@brokemexicanreviews

9 ай бұрын

If you click the link below it will direct you to Amazon…search “complete wire harness for Chinese ATV 250cc”…make sure it is complete with Stator and all electrical components I used in the video.

@phillipvillagran5727

9 ай бұрын

@@brokemexicanreviews thanks found it

@brokemexicanreviews

9 ай бұрын

No problem. Please make sure to subscribe.

would this work for a 90cc i have a stinger avt90 just need to check the stater to see if a 2 or 6 coil

@jerrymobilemechanicsroadsi4978

Жыл бұрын

I figured it out thanks again best video so far on a how to wire harness thanks for all the info do you know were i can get a gas tank or new carb for mt atv90

@brokemexicanreviews

Жыл бұрын

Hell yeah, glad you figured it out. If you use the Amazon link in the description I list all parts I use below. Also a bunch of Chinese quad parts will pop up since I link a bunch in the description of my videos. Don’t forget to subscribe! Thanks!

@jerrymobilemechanicsroadsi4978

Жыл бұрын

You're not a problem we'll do very informative yeah I saw some of them pop up I just got to see what carburetor will be the same since I know with these Chinese and Japanese four-wheelers or pit bikes sensor all kind of the same configuration of the same carburetor I just got to figure out which one is compatible with the one that I have on the atv

@brokemexicanreviews

Жыл бұрын

If you have IG or Facebook you can send me a pic of the entire engine and I can tell you which one will work.

Is it the same idea for a manual chinese 250 ?

@brokemexicanreviews

Жыл бұрын

For that you would want to see my video on a 150cc quad…that is the same concept when it comes to wiring. See below…and please do subscribe. Would really help the channel out. Thanks! kzread.info/dash/bejne/nox1kq6eZZu5d7g.html Also the wiring harness I used is linked in the description.

idk, i have a taotao 110 with electricla issues. wouldnt have headlights work or start at all. no life in it. i took the harness off, ordered a new harness, installed it just as you did in this video, and same thing. Nothing when you press the start button, no click from relay. Im not sure what could be the issue. If i bridge the solenoid, it does try to start, and i bypassed the front brake saftey switch, so its not that.

@brokemexicanreviews

Ай бұрын

Sounds like a loose wire? I would pull everything back off and retry the video. Did you see that there is a connector the looks like a 6 prong but really it’s a 5 prong?

@briwesk

18 күн бұрын

@@brokemexicanreviews so I ended up getting a whole new wire harness kit and everything on Amazon. Replaced it all, it turns the starter, but spark is intermittent. Might throw in the towel

Wow, great learning video. My question: i hav da most fuked up chi nah quad. My rectifier is plastic. Blk red pnk gry gree wires comes out of rectifier. Black n pnk not connected. Grn red gry goes to the vehicle. I bought a new one has 5 wires. Blk red yel pnk grn. How do i connect this new with existing blk red gry? Pls help n God bless you!

@brokemexicanreviews

Жыл бұрын

This probably is not going to be the answer you want to hear...I would send the rectifier back. Buy a complete wiring harness. It will save you a ton of time and trouble shooting just to replace it all. I have spent hours trouble shooting the electrical on these Chinese quads. It is way easier just to replace the entire thing...and you can do it in less than an hour. Also please subscribe. I'm going to be posting how to wire a 150CC and larger Chinese quad this next week.

@jackas1583

Жыл бұрын

@@brokemexicanreviews TYVM. But replacing complete wiring would pose the same issue. As I have upgraded the stator thus I need to change the rectifier. What do you say? Btw just subscribed.

@jackas1583

Жыл бұрын

@@brokemexicanreviews also what makes it worse is that I bought a total piece of chi nah crap that doesnt have a brand name. The ones i can remotely match is the one for upto 110cc. Mine is 125cc. I just needed more power to run LED lights. Thanks

@brokemexicanreviews

Жыл бұрын

@@jackas1583Thanks for subscribing...but back to the china quad...is yours a 2 coil or 6 coil stator? a complete wiring harness comes with every part necessary for spark...as long as your engine has compression it should fire over with starter fluid. You can only hook up the wiring harness one way...its almost impossible to mess it up...it is easy to troubleshoot. If you need more power to run LED lights...you should be able to upgrade your battery and run fine?

@jackas1583

Жыл бұрын

@@brokemexicanreviews well, mine was a 6 coil n i changed it to 8 coil. Per suggestion I also changed the rectifier since old one was POS plastic. Thats where i m challenged. My original connection is f-up. 5 coils coming out of recti and only 3 is being used. Makes no sense at all.

My 2 coil stator hasn't got a plug? Ive got 7 wire's, black & red green& red..PINK, yellow, blue,white, green. The connections on the wire loom are...white, red& black, blue& white, yellow & green.....huh?? Any idea?

@brokemexicanreviews

Ай бұрын

Typically, you just match wire color to wire color… You don’t necessarily need connectors… You can splice them together with butt connectors and crimp them… Do you have IG? You can send me pics.

@ba-doubble5199

Ай бұрын

I do, is it the same KZread name?

@brokemexicanreviews

Ай бұрын

It is in the video description… It is blancojackey

I have the same harness and you mention the only plug that not matching colors it’s red and brown I have red and grey and my two remaining possible plugs to fit in there are white and black wire with green and other one red and yellow wire with green wire and also yellow with black wire where to plug it?

@brokemexicanreviews

3 ай бұрын

Do you have IG? Would help if you can send pics. I’m sure I can I help out though. Please make sure to subscribe also.

@alexp7362

3 ай бұрын

@@brokemexicanreviews I don’t have IG email?

@brokemexicanreviews

3 ай бұрын

@@alexp7362 Instagram, not an email.

@alexp7362

3 ай бұрын

Yeah I don’t have none of those apps deleted all long time ago

@brokemexicanreviews

3 ай бұрын

Ok I will try to help as much as I can. It may be rough without pics. Can you link the harness you are using?

Is this pretty much same for every atv?

@brokemexicanreviews

20 күн бұрын

125cc and under are the exact same for all Chinese ATVs

What's the brand of the bike? I got the same one from someone but don't know the brand

@brokemexicanreviews

Жыл бұрын

I believe this one was a Kazuma…but these harness work on taotao, Kazuma, roketa, and a bunch of other Chinese quads. What kind do you have and how many ccs is yours? Also please subscribe

@kingtonyyoyo6370

Жыл бұрын

@BrokeMexicanReviews mine looks so much like yours on this video same size as well. Everything u have on yours mine have , even the plastics . But after watching so many videos I found urs and followed up and it wanted to start but now I have no spark

What's up bro I've been watching your videos and I admire your work and contents ....I have a problem I hope you can help me out...I bought two rtvs for my kids...I have zero experience with atvs...I do got some knowledge with motorcyclesss...anyhow 1 is an eton Rxl 50 viper it doesn't have a kickstand... The 2nd one eton AXL thunder 90 I don't see the kick stand but it has something where you can tell it has a break pedal or something they are 15 yr old were left out outside uncovered so I was watching your videos and I figured I should order wire harness which I did however the cdi is Way too small it has 4 pins the original dci from the rxl 50 is a bit bigger and and pin connector has more plus more wires also ...also the reley solenoid has two wires only the one from eBay the original has 4 pin connector...also I checked and it doesn't seem to have a stator I paid 28 dls for wiring harness...but it doesn't fit neither of the etons even though it said that it was for etons 50cc 70cc 90cc I watched ur videos and you purchased the same wiring harness and it worked fine for you.... I need help bro anything will be appreciated

@brokemexicanreviews

Жыл бұрын

Lmao…the longest message I’ve ever received. Do me a favor and subscribe…also Do you have IG or Facebook? I can probably help you better through those because you can send pics.

@krislopez3913

Жыл бұрын

Here the link to my Facebook

@brokemexicanreviews

Жыл бұрын

Sorry man it did not come up. My Facebook is in the link below. Do you mind adding me. When I see you pop up I’ll accept it and walk you through everything.

@krislopez3913

Жыл бұрын

@@brokemexicanreviews nothing comes up ...there's no link did you see a link to my Facebook?

@brokemexicanreviews

Жыл бұрын

@@krislopez3913 I did not see your Facebook link. My Facebook and IG link are in the description.

Hi is there anyway u can help me on this

@brokemexicanreviews

Күн бұрын

Yessir… Just responded to your message on IG.

How do you hook up the safety switch? I don’t understand.

@brokemexicanreviews

3 ай бұрын

You actually don’t have to hook up the safety switch in the rear. Not necessary for wiring.

@joshwinkleman6763

3 ай бұрын

@@brokemexicanreviews Well wonder why I don’t have spark then I don’t get it new wire, harness, new, everything stator No spark

@brokemexicanreviews

3 ай бұрын

Do you have IG? You can send me pics and I can walk you through your entire setup

@joshwinkleman6763

3 ай бұрын

@@brokemexicanreviews what do you mean by IG

@joshwinkleman6763

3 ай бұрын

@@brokemexicanreviews do you think there is a chance that my new stator is bad?

Brown and Blue comes from the starter button

@brokemexicanreviews

5 ай бұрын

Are you asking or saying?

Which wires need bipassed from the brake??

@brokemexicanreviews

4 ай бұрын

Are you trying to bypass the brake? To test spark? Or start?

@infernofairy8884

4 ай бұрын

To test spark

@infernofairy8884

4 ай бұрын

And to start.

@infernofairy8884

4 ай бұрын

I'm trying to figure out which two wires need pressed together

@brokemexicanreviews

4 ай бұрын

It’s a black wire and a green/yellow wire at the front of the wiring harness… If you have IG, you can send me photos of your harness and I can show you which two wires I am talking about. Also please make sure to subscribe. Thank you.

i started with a quad with nothing hooked up. which two wires did you hold to disable the brake saftey

@brokemexicanreviews

Жыл бұрын

There is a green and yellow wire on the front of the wiring harness. Hold those two together to bypass the brakes. Make sure the key is turned on, make sure the starter is good, and if the kill switch is on the back, make sure it’s fully seated or disconnected. Please Make sure to subscribe. I drop a bunch of DIY content, tool reviews, and quad content.

kzread.info/dash/bejne/oZx8j9KOj9enaLg.html Here's the link to the videos also say I buy a new stator and it fits perfect will it fit to the aftermarket wiring harness?? I got wiring harness already however nothing fit to wiring harness thank you

@brokemexicanreviews

Жыл бұрын

Bad news…those engines are way different than the engines on the Chinese quads that I work on. I’m not sure the wiring harness will work because I have never done one on a quad like that.

Bought a quad off him and he said it was his son's personal quad and he put a lot of money into it. One day of riding and now it has no power. Took it back to him to fix it and it's worse now than when I gave it to him. Don't trust these guys. Just go buy a new one and save yourself the headache.

@brokemexicanreviews

11 ай бұрын

I am not going to delete this comment because I know the truth. Quad ran fine when I gave it to you. You also did not mention that you guys flipped the quad, wrecked it, and sent me videos of you redlining it.