Пікірлер

• 
  @andres4483 күн бұрын

  Hi is there anyway u can help me on this

• 
  @brokemexicanreviews3 күн бұрын

  Yessir… Just responded to your message on IG.

• 
  @gregoryosborn22284 күн бұрын

  Thank you for the video. I'm going to fix my sister's car window later today and your video is going to keep me from tearing something up. Thank you!

• 
  @brokemexicanreviews4 күн бұрын

  No problem. Hopefully it helps you.

• 
  @meadescarduzio23735 күн бұрын

  Hey just saw this video. I have a gy6 125cc. How did you wire the ignition coil? I have a two prong coil, one prong goes on the coil, the other wire is a circular wire connection. How do these connect??

• 
  @brokemexicanreviews5 күн бұрын

  As long as I’m understanding you correctly…The other wire is just a ground. If you have IG you can send me a pic and I can tell you for sure

• 
  @brokemexicanreviews5 күн бұрын

  Spelled “recommend” wrong…too late not fixing it😅

• 
  @LyonhartZ25 күн бұрын

  what length is the trailer?

• 
  @brokemexicanreviews5 күн бұрын

  5x8…I used my friends trailer.

• 
  @wandajames62348 күн бұрын

  I love how you just persevere. I'm ready to give up on mine. I just got a new brake caliper with hose and handlebar lever from Amazon but they shipped it with a piece of plastic between the pads and I CANNOT get that thing out. Have you ever gotten new brakes like this? I tried to compress the pins but ended up chipping a corner from the outside pad. WTF? How are you supposed to install them if you can't get that stupid piece of plastic out? There's no spot to compress the piston either. I sent a message to the seller and instead of answering they asked for a photo. Any advice? Thanks!

• 
  @brokemexicanreviews8 күн бұрын

  Thanks man. Sometimes I overdo it and refuse to give up. Some vendors aren’t the most helpful. Also you are not going to like this but if you have IG or Facebook, it would be helpful if you could send pics.

• 
  @wandajames62347 күн бұрын

  @@brokemexicanreviews The seller got back to me and also asked for pics : ) which I gave him. I'm a former Class A auto mechanic with Honda and I have never seen the likes of these designs. I'm used to calipers that slide and flip up and you don't have to struggle with for 18 years- and so cheap they break at a tap. But this spacer between the pads is NOT moving up, down or left or right. Several people have tried it with several different tools. I'm just asking for a replacement with NO spacer. Many you are one patient (and nice) dude! Thanks!

• 
  @shawtyg155112 күн бұрын

  How do you tighten the starter chain mine is loose

• 
  @brokemexicanreviews12 күн бұрын

  There are guides that hold it in place if you have IG you can send me a pic of yours and I can explain it better

• 
  @ericreese614013 күн бұрын

  I have some high end LPHV gun & this damn gun laid down some clear like a boss.The fan was even on point.I didn’t even really have to adjust it much!The worst thing about this gun like all other guns was the clean up!1/10 I will give it a solid 10

• 
  @dndproductions398617 күн бұрын

  Will that fix an Baja At150ss atv ?

• 
  @brokemexicanreviews17 күн бұрын

  Does it use the same harness?

• 
  @PhilaBrewtown22 күн бұрын

  That was the best description of how to replace a Chinese starter.

• 
  @brokemexicanreviews22 күн бұрын

  Glad it helped man. Make sure to subscribe if you haven’t already

• 
  @kain659022 күн бұрын

  Is this pretty much same for every atv?

• 
  @brokemexicanreviews22 күн бұрын

  125cc and under are the exact same for all Chinese ATVs

• 
  @codykastler4709Ай бұрын

  You would be doing others a favor by removing this video since you gave a bad review of a product you didn't know how to use. I know you're just leaving it up for the views you're getting, but how many people have been led astray by wrong info? This one isn't doing your conscience any favors.

• 
  @freemagnetАй бұрын

  these are recalled so local dealers pay $825 for them back

• 
  @brokemexicanreviewsАй бұрын

  That is good to know. I wish I would’ve known before I sold it $550😂

• 
  @ba-doubble5199Ай бұрын

  My 2 coil stator hasn't got a plug? Ive got 7 wire's, black & red green& red..PINK, yellow, blue,white, green. The connections on the wire loom are...white, red& black, blue& white, yellow & green.....huh?? Any idea?

• 
  @brokemexicanreviewsАй бұрын

  Typically, you just match wire color to wire color… You don’t necessarily need connectors… You can splice them together with butt connectors and crimp them… Do you have IG? You can send me pics.

• 
  @ba-doubble5199Ай бұрын

  I do, is it the same KZread name?

• 
  @brokemexicanreviewsАй бұрын

  It is in the video description… It is blancojackey

• 
  @artvondrak1638Ай бұрын

  Why didn't you just loosen the throttle cables unhook them then you can remove the whole carb with the choke cable intact and work on it on a bench? It's alot easier. Rookies take note.

• 
  @brokemexicanreviewsАй бұрын

  Great feedback. Thank you and appreciate it.

• 
  @YuckFou0x0FFFFАй бұрын

  I mean. You don't NEED a lot of tools. They just make certain jobs much easier.

• 
  @brokemexicanreviewsАй бұрын

  Very good point… I actually found a job on a 93 grand Marquis that made removing the serpentine belt a whole lot easier. Thank you for the feedback.

• 
  @briweskАй бұрын

  idk, i have a taotao 110 with electricla issues. wouldnt have headlights work or start at all. no life in it. i took the harness off, ordered a new harness, installed it just as you did in this video, and same thing. Nothing when you press the start button, no click from relay. Im not sure what could be the issue. If i bridge the solenoid, it does try to start, and i bypassed the front brake saftey switch, so its not that.

• 
  @brokemexicanreviewsАй бұрын

  Sounds like a loose wire? I would pull everything back off and retry the video. Did you see that there is a connector the looks like a 6 prong but really it’s a 5 prong?

• 
  @briwesk20 күн бұрын

  @@brokemexicanreviews so I ended up getting a whole new wire harness kit and everything on Amazon. Replaced it all, it turns the starter, but spark is intermittent. Might throw in the towel

• 
  @eleazarvasquez27Ай бұрын

  Where do you get the cable i have the same proble

• 
  @brokemexicanreviewsАй бұрын

  Cable is linked in the description brother.

• 
  @craigabram2132Ай бұрын

  Thanks Brother, your video really helped me out!!!!! Saved me money and now I can help me and someone else when they need it!!! Best Wishes

• 
  @brokemexicanreviewsАй бұрын

  I’m glad it helped you out man. Please make sure to subscribe.

• 
  @craigabram2132Ай бұрын

  @@brokemexicanreviews I did last night while watching it a second time... That's a nice scoot you have/ had ... Way to much dust though Bro ...

• 
  @brokemexicanreviewsАй бұрын

  Got it detailed and just sold it brother😂

• 
  @TalariaMonster413Ай бұрын

  Yo I got a whole new Chinese wire harness for my extreme machine 90cc it’s basically like a Polaris 90cc but it’s had a button for the choke for carb on old wire harness my new one doesn’t… how do I fix this?

• 
  @brokemexicanreviewsАй бұрын

  I’ve never done a Polaris. If the harness works why not just make the choke a manual choke?

• 
  @jerrystatic256Ай бұрын

  I used the link for the cable and put it on and Im having trouble getting the slide to sit all the way down. The slide is in correct and everything is adjusted right. I have the same atv as yours.

• 
  @brokemexicanreviewsАй бұрын

  If you have IG I can probably help more with pics?

• 
  @user-xb5pn4dn4vАй бұрын

  an exceptional example of mechanical advantage

• 
  @brokemexicanreviewsАй бұрын

  A friend actually showed me this. I wish it was my idea. Works great.

• 
  @darrelmoman7641Ай бұрын

  Do that wiring harness Have a socket for a Electric carburetor

• 
  @brokemexicanreviewsАй бұрын

  I’ve been asked this question, I’ve never messed with an electric carb. Sorry about that.

• 
  @hamjudoАй бұрын

  TIL: Use a pipe wrench or something else that quickly bites the fencepost. I have pulled posts with a jack before, but I didn't use a fast technique for clamping onto the post. So my method wasted a lot of time positioning the wrong tool for the job.

• 
  @brokemexicanreviewsАй бұрын

  What is TIL? Hopefully this helps you in the future. Video is getting decent views…but it is a useful method

• 
  @hamjudoАй бұрын

  @@brokemexicanreviews Today I Learned

• 
  @brokemexicanreviewsАй бұрын

  Today I learned also. Thank you and thanks for the feedback.

• 
  @jessicahartley174Ай бұрын

  That's a freaking, awesome idea.Never thought of it... 💪🏾🙏🏽

• 
  @brokemexicanreviewsАй бұрын

  Works pretty well for the most part. Easier when the ground is wet.

• 
  @TheAngeryIrishmanАй бұрын

  Hey mate! I've been playing with mini bikes for years. None with battery's or starters. I just bought a ZSTAR 110cc quad ( a fixer uper) I change the spark plug, solenoid, fuel lines, etc. NEVER thought to try the starter. It works! It's alive after 4 years of sitting. I appreciate the in depth help

• 
  @brokemexicanreviewsАй бұрын

  Of course man. Glad it helped. Please make sure to sub. Would definitely help the channel.

• 
  @geraldwilliams306Ай бұрын

  I had to take the 3 allen head bolts out of the round pulley and use a three jaw puller to get the pulley off then put the chain on the sprocket on the back of the pulley and put back together. My chain didnt have a masterlink. The allen head bolts had to be taken off with an impact

• 
  @brokemexicanreviewsАй бұрын

  Someone else messaged me on IG and had to do this exact same thing. I’ve honest never had this issue but it is useful information for others. Thanks for the feedback.

• 
  @wg76442 ай бұрын

  I own to types of these - the cheaper Harbor freight / Pittsburgh set is ok. I have a ratcheting set it is ok too. But the Pittsburgh Pro Dual FLex head ratchet that is a 1/4" and 3/8" on either end is a time savor. It is just long enough to get leverage and short enough to avoid obstacles. They are cheap AND you can use it for other hard to reach nuts/bolts.

• 
  @brokemexicanreviewsАй бұрын

  A few months after I posted this I realized how useful this was on a grand marquis I had😂

• 
  @nickname8552 ай бұрын

  When you do this for a living and do. 3,4,5 a week yes you want a serp belt tool. When you work on one specific year make and modle aka your own car yes you can make a trick up to do it. But when your getting paid based on how efficent you are for the repair yes you want one.

• 
  @brokemexicanreviews2 ай бұрын

  You are correct. I had actually never found a reason to have one of these but I take that back. I had a 1993 grand marquis that this thing came in handy and was definitely worth it. Thanks for the feedback. I’m sure it will help someone out.

• 
  @leej25072 ай бұрын

  This might be a dumb question but what if he hits something under the car like will it increase the probability of stuff hitting that shock thing?

• 
  @brokemexicanreviews2 ай бұрын

  Since the blazer is lowered it will definitely increase the chances of hitting things.

• 
  @freedemminds49762 ай бұрын

  The comments are HILARIOUS 😂

• 
  @brokemexicanreviews2 ай бұрын

  Oh man…at first they hurt😂. Now I’m glad I left this video up. It will help others

• 
  @FashionQG2 ай бұрын

  Hey! What does the cable above the two brake cables go to? They’re black & green… I didn’t take the screw off of the handle bars & I accidentally made the wires come apart on that cable🤦🏾‍♀️

• 
  @FashionQG2 ай бұрын

  You said it’s to the brake light… will I have to get a new cable or try to plug it back in?

• 
  @brokemexicanreviews2 ай бұрын

  Sorry just seen this. It sounds like the brake cable. You will need to bypass the brakes or reinstall the cables in order to start the quad. Without the brake cable functioning you won’t received spark. Do you have IG? And you can send me a pic?

• 
  @Kpostma1002 ай бұрын

  i have an eigtheen coil stator and could not find a wiring loom to fit that so i ordered one with another stator.going to become a six coil stator.just hope it al fits

• 
  @brokemexicanreviews2 ай бұрын

  Eighteen coil stator😂😂…please update me on how it goes. I’ve never worked on a quad with a stator that big. Also thanks for the comment and make sure to subscribe.

• 
  @DIXIEMAFIA2512 ай бұрын

  Bro those are bullets! Those were obviously hollow points!! Could’ve been a murder or something! Let us know and update us

• 
  @brokemexicanreviews2 ай бұрын

  Lmao. I hope not. And your name is Dixie Mafia. Love it. Make sure to sub. Have a good day and thanks for the comment.

• 
  @brendahall74832 ай бұрын

  You could try jumping the solenoid with an old open end wrench instead of 2 screwdrivers. That way allows one hand performance. Good video… keep up the good work!

• 
  @brokemexicanreviews2 ай бұрын

  Tons of ways to do it. Your way is probably better though. Thanks for feedback.

• 
  @mondude97542 ай бұрын

  Nice find

• 
  @brokemexicanreviews2 ай бұрын

  Thanks man. Was my friends. He gave it to me…I tried to pay him for it, but he said don’t worry about it.

• 
  @mondude97542 ай бұрын

  @@brokemexicanreviews what a nice guy… perhaps he was also a little fed up with it

• 
  @brokemexicanreviews2 ай бұрын

  I’ve been fed up with them before. I think he was also. I think the electrical issue is because the harness got wet.

• 
  @mondude97542 ай бұрын

  @@brokemexicanreviews could be anything really. That little quad I have gets that problem all the time but if I jiggle the plugs in the wire harness it just starts working again

• 
  @brokemexicanreviews2 ай бұрын

  I’ve tried this before with no luck. I feel like anytime the wiring harnesses get wet on these little quads they have issues

• 
  @MsVickiesmith2 ай бұрын

  Thank you. I'm a 53 year young lady who has a chinese atv and couldn't figure out how to get the chain back on 😂 You saved me more Grey hairs

• 
  @brokemexicanreviews2 ай бұрын

  That is hilarious. Color your hair. Being serious I am glad the video helped. Please make sure to subscribe.

• 
  @MsVickiesmith2 ай бұрын

  ​@@brokemexicanreviews 🤣 Hair colour is now applied to shopping list , and of course I've subscribed 👍🏼

• 
  @raymundomorales50032 ай бұрын

  Different tools for different types of work and u have the wrong job for that gun 😂😂😂😂😂😂😂

• 
  @brokemexicanreviews2 ай бұрын

  Bruh😂…read the other comments on this video…I’ve been roasted enough😂

• 
  @keithephesusgoodman86952 ай бұрын

  Dude, did you think your paint?!

• 
  @brokemexicanreviews2 ай бұрын

  I did not “think” my paint. Being serious I’ve been roasted in this video😂…I only left it up to help others. The comments are gold also.

• 
  @brianharris36023 ай бұрын

  Do you have a good picture of a pz20 carb and the fuel line routing for a Meerkat 50cc quad?

• 
  @brokemexicanreviews3 ай бұрын

  I think I had to use a pz19 on those tiny quads. Also I had to order a shorter or longer carb…those are so hard to make fit😩🙃

• 
  @jimmygarcia30683 ай бұрын

  Haha😂I dig ur name "Broke Mexican" Orale!

• 
  @brokemexicanreviews3 ай бұрын

  Thanks man. Please make sure to subscribe.

• 
  @X3Paxcho6203 ай бұрын

  Headlights not switching on or switch to high beams but don't switch back and occasionally just suddenly turn off.

• 
  @brokemexicanreviews3 ай бұрын

  I just noticed who this is😂 You can have my old switch. Will need to rewire but it still works. This will help to to see if it’s the multifunction that went bad. If you want it let me know. I haven’t thrown it away yet. The only thing that is bad on this one is the cruise control.

• 
  @X3Paxcho6203 ай бұрын

  Are the high beams ever something you deal with when it malfunctions?

• 
  @brokemexicanreviews3 ай бұрын

  What is it doing?

• 
  @Kookaveli3 ай бұрын

  Just one question..... Do you ever really do anything with that?? 😅. JK but thanks for making this because the others I watched before were fast forwarding through some things I needed to see. Much appreciated!

• 
  @brokemexicanreviews3 ай бұрын

  Anything with the motorcycle?😂 I’ve put 2,000 miles on it in 2 years😂. And no. Please make sure to subscribe.

• 
  @XchakGearz3 ай бұрын

  thanks! 👍

• 
  @brokemexicanreviews3 ай бұрын

  Bruh…don’t believe my review…read the comments. Got roasted on this one. Please subscribe…I left it up in hopes others would learn something.

• 
  @matthewrodriguez43373 ай бұрын

  D.a another starter intsall video that didnt show what what is needed....stop posting for attention rename title bright ugly shirt guy just rambling

• 
  @brokemexicanreviews3 ай бұрын

  “Bright ugly shirt guy just Rambling”😂 Video is over starter chain and tension guides only. Below is a video on replacing the entire starter. Please make sure to subscribe and have a good day. kzread.info/dash/bejne/apiFkpmhYbCdj7A.html

• 
  @richarddeerflame3 ай бұрын

  thanks Brother

• 
  @brokemexicanreviews3 ай бұрын

  No problem. Hope it worked out for you. Please make sure to subscribe.

• 
  @poolman86763 ай бұрын

  Not on an Eton.

• 
  @brokemexicanreviews3 ай бұрын

  I actually just bought an Eton. Going to learn a lot about them very soon. Make sure to subscribe.

• 
  @20katana063 ай бұрын

  You did a good job, but those directional tires are on backwards, brother. Flip them from right to left and youll be good to go, arrows point forward

• 
  @brokemexicanreviews3 ай бұрын

  I’ve gotten a few comments about this on other videos😭. I’ll pay more attention next time. Thanks for the feedback and please subscribe🙏

• 
  @JDon-PJPodcast3 ай бұрын

  Thanks for the video man! Subbed to your channel. Helped out a lot replacing the starter. I burned it up and half the wiring harness trying to jump start it 😅. Still waiting on the wiring harness to come in but I already know it’s gonna be a mess trying to get everything matched up. What brand is the bike you are working on in the video?

• 
  @brokemexicanreviews3 ай бұрын

  Of course man. It’s a Tao Tao. All Chinese quad(50cc-125cc) harnesses are the same. I have a step by step video on how to wire them. If you have IG you can send me pics and I can help you walk through it. Video is linked below. kzread.info/dash/bejne/a2qIuo-QidSwmtY.html