How to wax a VCT floor the easy way

Edmund's Guys - Waxing a floor with flat mop system

Пікірлер: 75

  • @kocherrrkeyboards
    @kocherrrkeyboards Жыл бұрын

    Very helpful! Thanks Dixon!

  • @christiangymado
    @christiangymado Жыл бұрын

    We use wax wands with a back pack pouch! This is the old school way of doing things . It’s a wand with a flat mop, has a tube that comes out from the pouch in the back pack which is released out onto the floor directly in front of your pad with a trigger system at the top of the pole! Nice work

  • @axigon6904

    @axigon6904

    11 ай бұрын

    Been waxing floors at my hospital job for 2 years now. I absolutely despise the wand with the back pouch. Weight of the wax throws me off especially when working for hours. And the "flat" pad it comes with is meant to be used in one direction. Flat pad and this method make it so much easier. Especially when covering large areas

  • @mariocordova1466

    @mariocordova1466

    3 күн бұрын

    Pictures​@@axigon6904

  • @lorenzodavis501
    @lorenzodavis5012 жыл бұрын

    I been doing old school for 30 years. Thanks bro!

  • @juliosandoval8244

    @juliosandoval8244

    2 жыл бұрын

    I use a regular wax mop comes out clean 15 years doing it

  • @rocman9137

    @rocman9137

    Жыл бұрын

    @@juliosandoval8244 same here im mighty fast with a mop. I can do Whole isles per dip lol

  • @juliosandoval8244

    @juliosandoval8244

    Жыл бұрын

    @@rocman9137 yup

  • @babyjames6103

    @babyjames6103

    Жыл бұрын

    @@juliosandoval8244 Best place to get a wax mop?

  • @reaveslatonic1897
    @reaveslatonic1897 Жыл бұрын

    That's the very easy way to use that. I love using it with the the pad

  • @chunk144
    @chunk14422 күн бұрын

    I have been waxing for 15 years. I wish i have found out about the flat mop sooner. This is a lot faster for sure.

  • @DaveLewerenzCleaning
    @DaveLewerenzCleaning Жыл бұрын

    10 yrs exp Last night I tried the flat mop method for the first time, and yeah, so much easier to edge cleanly and spread! nice thin coats. And wasted alot less wax since I only put down on the floor only what I need. Not to mention, clean up is super easy. I should have tried this a long time ago!

  • @rocman9137

    @rocman9137

    Жыл бұрын

    I still feel like i can go faster with a fresh White wax mop and a bucket but ill try the flat mop again.

  • @noeltorres5239

    @noeltorres5239

    Жыл бұрын

    Whoever came up with this technique is a genius the only concern I have is should be a better way to pour the wax over the floor

  • @BlakWiseCracker

    @BlakWiseCracker

    Ай бұрын

    @@noeltorres5239 I use a spray bottle or pump.

  • @tankthagreat791
    @tankthagreat7913 жыл бұрын

    You a badd boy. clean work

  • @brandonnguyen8517
    @brandonnguyen85172 жыл бұрын

    Luv the way bro...🤟🤟work smart not too hard

  • @youngyoung8059
    @youngyoung8059 Жыл бұрын

    Called Sean and he answered the phone and gave me some tips😂 cool guy!

  • @RD-wy5dj
    @RD-wy5dj Жыл бұрын

    Thanks for the video 👍

  • @burntout8291
    @burntout8291 Жыл бұрын

    Nice I put mine in a dry bottle and dump as a go, same concept 🤙

  • @Traviee
    @Traviee2 жыл бұрын

    Broooo you smart I like this

  • @moonmagnolia7
    @moonmagnolia73 жыл бұрын

    Thank you!

  • @trevorneitzel9453
    @trevorneitzel94532 жыл бұрын

    So when do you edge it? If I'm stripping I usually edge it every coat, but I've been told after a couple coats I don't need to anymore. Are you saying to wait until the last coat to edge it? Also, why do you go in figure 8s and not more straight back and fourth?

  • @edgarmondragon578
    @edgarmondragon5782 ай бұрын

    I’ve been waxing floors for 10 yrs and never used this method seems back breaking to be bending over and over pouring it but I like it when cutting areas. To me the mop bucket seems much easier but heavier to mop specifically when it comes to 10,000 sq ft but I’ll try it in small areas and also I would need to pour out of the 5 gallon bags into a gallon to pour seems like more work to be pouring into gallons since the hospital provides the 5 gallon floor finish Hmmmmm what to do? 🤔

  • @CarReNah94
    @CarReNah94 Жыл бұрын

    That's exactly how I do it at my building to. Pour the wax use a flat head.

  • @Traviee
    @Traviee2 жыл бұрын

    Yes experts will definitely tell you this ain’t the way but it’s whatever works for you

  • @forevermetal209
    @forevermetal2094 ай бұрын

    What handle are you using for the flat mop?

  • @TheLoobis
    @TheLoobis4 жыл бұрын

    I like it. What do you think of the Home Depot Zep product? I've stripped and finished floors several times and always find the polish to not last. Don't know if it's the product.

  • @wesleysmith4281

    @wesleysmith4281

    4 жыл бұрын

    It depends on the number of coats you put on and if the floors are maintained between refinishings.

  • @miltoncastro935

    @miltoncastro935

    3 жыл бұрын

    I want to learn how to maintain and refinish vct, any videos or guides you recommend

  • @juliosandoval8244

    @juliosandoval8244

    2 жыл бұрын

    zep is junk wax

  • @DAGGIR1
    @DAGGIR1 Жыл бұрын

    can u reuse the mop n how do I clean it

  • @robertomacias2394
    @robertomacias23942 жыл бұрын

    How long until someone can walk on it ?

  • @josegallardo4550
    @josegallardo4550Ай бұрын

    We are looking for Union. For the courthouse's downtown denver colorado. You will be Perfect..

  • @chrispate9855
    @chrispate98554 жыл бұрын

    Diamond Guard is GOOD brand... TRUTH is in order for it to POP,YOU must apply it RIGHT...

  • @judymorgan8409
    @judymorgan8409 Жыл бұрын

    Wish you were in Pittsburgh!

  • @walden0220

    @walden0220

    Жыл бұрын

    I seen janiking and thought he was😂😂

  • @dirtybob1990able
    @dirtybob1990able4 жыл бұрын

    I wanna ditch the bucket and mop. What size head did you use/ kind of pad that is. Will high mileage wax work with this set up?

  • @elianroland7028

    @elianroland7028

    2 жыл бұрын

    I guess Im asking randomly but does someone know of a way to get back into an instagram account..? I somehow forgot my account password. I would appreciate any tricks you can offer me

  • @axelali4254

    @axelali4254

    2 жыл бұрын

    @Elian Roland Instablaster :)

  • @elianroland7028

    @elianroland7028

    2 жыл бұрын

    @Axel Ali Thanks for your reply. I got to the site thru google and Im trying it out now. Takes quite some time so I will get back to you later with my results.

  • @elianroland7028

    @elianroland7028

    2 жыл бұрын

    @Axel Ali It worked and I finally got access to my account again. I'm so happy! Thanks so much, you really help me out :D

  • @axelali4254

    @axelali4254

    2 жыл бұрын

    @Elian Roland No problem =)

  • @juniorjr7015
    @juniorjr70153 жыл бұрын

    What type of floor finish did u used??

  • @juliosandoval8244

    @juliosandoval8244

    2 жыл бұрын

    use bravo floor sealer n wax or spartan

  • @juliosandoval8244
    @juliosandoval82442 жыл бұрын

    why would u just trow the wax on the floor and not use a special mop?

  • @guzman9011
    @guzman90113 жыл бұрын

    What’s the purpose of burnishing a few days later? What if you don’t burnish it?

  • @pookaill

    @pookaill

    3 жыл бұрын

    Burnishing makes the floor pop and melts the sealer/wax into the floor and might hide streaks.

  • @juliosandoval8244

    @juliosandoval8244

    2 жыл бұрын

    its best to wax the floor than 2 weeks later putt maintaner and burnish the floor to polish seals it better.

  • @luckylifeonwheels626
    @luckylifeonwheels6264 жыл бұрын

    I have been a floor finisher for about 5 years now and i used the string mop and bucket method, and thought i would try using the flat mop and poor method as you show and its way better i think and much faster. but it seems like i use more wax with pouring on the floor opposed using a mop bucket.

  • @listenhere1623

    @listenhere1623

    3 жыл бұрын

    I just stripped and waxed a small kitchen with a sponge mop and elbow grease to get up a bunch of glue after installing. I used a swiffer something with a rag attached to smooth out the wax I sprayed on the floor with a 1$ spray bottle. I guarantee it's better than this hacks work. 14' by 11'

  • @bigvgroup279

    @bigvgroup279

    2 жыл бұрын

    you definitely use less because a mop soaks up a lot of wax

  • @jaimedominguez9460
    @jaimedominguez94603 жыл бұрын

    How long in between applications of wax do you wait to add the next coat?

  • @frederickweemsjr9511

    @frederickweemsjr9511

    3 жыл бұрын

    About 15 to 20 minutes with a blower are two on it but make sure you have the blowers facing up in the air at the start so you don’t blow the wet wax up and make waves in your floor and you can touch it and see if it’s sticky to the touch

  • @jaimedominguez9460

    @jaimedominguez9460

    3 жыл бұрын

    Thank you Fredrick, haha I learned that the hard way and made waves. But it’s going very well now thank you

  • @frederickweemsjr9511

    @frederickweemsjr9511

    3 жыл бұрын

    @@jaimedominguez9460 welcome, glad it’s working out for you. Be careful out there and good luck

  • @sarahparker9645

    @sarahparker9645

    6 ай бұрын

    How many times do you change the head when mopping it

  • @corystephenson1348
    @corystephenson13482 жыл бұрын

    After you Strip it and clean it do you seal it before you wax or and do you use neautral ph cleaner before wax or after

  • @trevorneitzel9453

    @trevorneitzel9453

    2 жыл бұрын

    After you strip it and rinse it twice just dry mop it and it should be good to go once it's dry. Ready for wax.

  • @rafaelroman3867
    @rafaelroman38673 жыл бұрын

    Will you notice the figure 8 marks on the floor??

  • @jslute

    @jslute

    2 жыл бұрын

    Yup.Tried it today,I had to redo it.Maybe this wax is meant to be put on like this but not the ones we use.

  • @Ducky195

    @Ducky195

    2 жыл бұрын

    Usually the newer floor finishes are supposed to level out and eventually lay even.

  • @walkwaymanagementgroupinc.9286
    @walkwaymanagementgroupinc.92862 жыл бұрын

    No need to strip and wax your floor any longer, BOOST™ MAX Slip Resistant Nano Sealant replaces annual strip and wax, lasts 3-7 years, provides slip resistance to all national standards, scratch resistant, and ease of maintenance. Check it out here: kzread.info/dash/bejne/fnqd0dyLgLPPhbg.html

  • @PaulBooth-ve3qz
    @PaulBooth-ve3qz Жыл бұрын

    I've been working at a k-8th grade school for 6 yrs 600 students 200 adults that makes for 4000 pairs of feet by the end of the week during the school year no matter how the floor is waxed the shine is gone by October!!!

  • @PaulBooth-ve3qz

    @PaulBooth-ve3qz

    Жыл бұрын

    Give me the mop and bucket way any day

  • @tyroneearnest4513
    @tyroneearnest451311 ай бұрын

    waxing your beard, hilarious.

  • @junbing626
    @junbing626 Жыл бұрын

    I fell asleep while watching you mopping

  • @dayortiz5980
    @dayortiz59802 жыл бұрын

    Seems like you waste a lot of product tho.

  • @masterbaiter141
    @masterbaiter1413 жыл бұрын

    oof! my guy do yourself a favor and dump that franchise, they're a greedy company. get out and go make your own company, trust me you'd be better off.

  • @bb-kd9dz
    @bb-kd9dz4 жыл бұрын

    Doesnt keep a leading edge, doesnt go wall to wall or edge to edge and your wax is probably garbage. Never call Shawn. What a joke!

  • @erichogan9769

    @erichogan9769

    4 жыл бұрын

    i second this opinion!

  • @adamjustice857

    @adamjustice857

    3 жыл бұрын

    I third this opinion

  • @listenhere1623

    @listenhere1623

    3 жыл бұрын

    Can you explain the terms you used. I want to do a good long lasting job for my mother's kitchen.

  • @loganmyers9504

    @loganmyers9504

    3 жыл бұрын

    Never call jani king lol. They are a joke when it comes to janitorial work. We steal their janitorial accounts left and right all the time. Awful & cheep franchise

  • @lrmerce

    @lrmerce

    3 жыл бұрын

    Doesn't need to go to the edge on 1st and 2nd coats