HOW TO: VHT Ceramic Spray Painting Exhaust Pipes | Harley Sportster 48
Автокөліктер мен көлік құралдары
Harley Sportster 48 very high temperature (VHT) spray paint process on my wrapped Arlen Ness exhaust pipes. How to DIY steps using primer, VHT back and satin gloss to finish the look. In the next video I'll be applying the new exhaust pipe wrap.
Follow me on Instagram!: / riding_digital
Music credit: / the-chemist-10
Kronicle, That Sunny Day
Kronicle, Beach Drive
Kronicle, Leaving
Пікірлер: 256
Always enjoy your 48 vids. I recently watched the one you did on adding aftermarket pegs and having to use an angle grinder on the clevis. Ended up doing the exact same thing. Worked great!
@ridingdigital
6 жыл бұрын
Awesome, thanks a lot really appreciate it! Glad you enjoy them :) RD
A good technique while working with man-made vitreous fiber is to wet it down with water. This will help to minimize the amount of fibers that are released. Good on you for wearing a respirator as well.
@ridingdigital
6 жыл бұрын
Hadn't thought of that...good shout! 👍🏻
@bikerbison
4 жыл бұрын
Coronavirus!!!!!
Great job! Pipes look brand new!
Gorgeous results!
This was awesome and super helpful mate. Thank you!
Really good to see how simple that was... nice :)
Good job man I'm gonna do the same thing to my pipes...thanks for the video
Excellent job!
defiantly tackling this during the this winter, cheers!
The paint job looks great, thanks for sharing! Can you please tell us exactly what primer and paint you used? Did you put clear lacquer over (before curing)?
The matt look looks 👌 😍
Shocked at how well those pipes actually turned out with the rattle can. Your videos are great and bike looks awesome. Hope to see many more vids from you.
@ridingdigital
7 жыл бұрын
+Bogan Moto Thank you, honestly I'm surprised at the finish too! Hopefully they'll hold up with the heat. RD
@bangximdead
6 жыл бұрын
Riding Digital i know it hasn't been very long but how did the paint hold up? Would you recommend it?
@ridingdigital
6 жыл бұрын
+floramakes Hey, so far I've ridden around 1000 miles in some quite wet roads and unfortunately I have had paint coming off the top of the headers before I wrapped over them. The exposed ends are ok but there is some pitting. If I did it again I'd look to use the Rustoleum high temp paint which I hear is better (unfortunately couldn't get it in the UK). Will show the pipes in a future video! RD
@bangximdead
6 жыл бұрын
Riding Digital Try eBay! I live in sweden and can’t get most of the stuff here but eBay is always a safe bet. I’m looking forward to seeing it.
Nice job! Looks good.
Great just the video i needed! Thank you sir
Mate that is one sweet ride!!
@ridingdigital
5 жыл бұрын
cheers mate 👍🏻
Exactly what I was looking for 👍 wish my exhaust was that easy to pull off
@ridingdigital
3 жыл бұрын
there was a lot of straining off camera!
I did that with heat shield on my pipes and it peeled and did it like u did so how long dtd it last for u
Nice job!!!
Thanks for the vid. It was a lot of help. How is the paint holding up? Does it scuff/scratch easily?
Really good job! I have any questions that are not in the comments: I have 2 chrome mufflers, no rusty, in very good conditions, is necessary the coat of prime? Is necessary to pass sandpaper in my situation if I use the coat of prime? Have you wait any minutes between one paint can and another? And between one coat of paint and another? Very thanks!!!
hi, how about the undercoat does it requires a high tempt too? thanks
Looks amazing! Thank for posting this, wasn't sure what paint to use on the pipes I'm making for my virago ✌
@ridingdigital
4 жыл бұрын
good luck buddy
@99milesaway41
4 жыл бұрын
@@ridingdigital ended up using the VHT, turned out beautifully
Great video man - no thumbs down for you my friend 👍
Nice bike. Nice exhaust job.
Yeah what about the pipes themselves without the shields on how did they turn out ?
HI , do you have install fuelpak ?
What grit sandpaper did you use?
excuse me, how long does it take to dry the paint before you subject it to healing time?
Reminds me , my matte ss heat shields need a re spray , great result fella
@ridingdigital
6 жыл бұрын
Thanks bud. unfortunately it didnt hold up too well on the headers (although wrapped now) I gather the rustoleum high temp sprays are the db's so will give them a go next time.
Dude that is awesome! I wanna paint mine now lol
Hi I'm planning to repaint my buell blast exhaust with the vht gloss black two questions. . First the bike is being winterized and the exhaust won't be put back on till sprig.... Will it need the clear coat being a gloss. . Second I know it needs to be heat cycled to cure and I was planning to wrap the header section will I have to do that after it's heat cycled or can it be done now then heat cycled all at once
Great stuff! How does the paint holding on? Any cracks or chips?
Looks great. I’m going to do this to my heat shields on my Vance & Hines short shots 👍
Gonna try cerakote on my thunder headers. Yours came out nice just wondering for how long. I’m choosing cerakote hopefully for some longevity. Cheers
Hello had a quick question do you remember what grit sandpaper you used or was it a scotch brite pad. ?
Thank you, very well done👍🏻
@ridingdigital
6 жыл бұрын
thanks dude, appreciate it 👍
Looks good. Been trying to do this on my fat Bob heat shields after I went with black slip ons. Still indecisive
Nice job!
Looking good Mate. Did it hold up over time ? I’m waiting on some Helix Racing Ceramic Paint for my Vance & Hines 2 into 1 pipes. Chalky looking up by the Heads. Hopefully it holds up .
Does the paint hold well? Has it chipped?
I found it necessary to bake the pipes in my BBQ grille using the three step process of 250, then 400, then 600 degrees Fahrenheit for the recommended time with the on the can instructions in order to properly seal the paint from head to exhaust exit. I tried using the temp. sensor on the grille and the baking process failed and started flaking off. After sanding and re-painting I baked the pipes using a laser temperature gun making sure the actual part was the correct tempurature for the correct amount of time (per instructions) and it turned out AWESOME. Just starting the bike and running it did not seal the paint properly to make if fully sealed and therefore chemical and wear/scratch resistant as it can be. Hope this info. helps any of you who tried this without getting the results you were looking for.
@nebulonv6015
5 жыл бұрын
what did you use for paint?
@ridingdigital
5 жыл бұрын
great info, thanks. it's one of those situations where it's a lot of hassle to follow the steps properly but if you don't then the results don't follow. Appreciate the share 👍🏻
How did the paint hold? I have been trying to decide what paint I should use. Every one I asked stated it peeled off really quickly.
Excelent!
Well made video brother
Which sand paper do you use?
haha hell yeah man ! I JUST bought a 48 and the pipe has some wear and tear, got the guy downn on price because of it - feels great now knowing I'll be able to clean it up for under 100 bucks! hahaha AWESOME VIDS DUDE! *hits subscribe!*
@ridingdigital
5 жыл бұрын
Good job! NAILED IT! 👊
Very nice 48. Good job 👍🏻
@chefmike8888
6 жыл бұрын
The beer has to help at least a little right?
@ridingdigital
6 жыл бұрын
After many years of tinkering I can say that without the beer, it would be impossible. Thanks buddy 👍🏻
Thank you for the detailed video. Those turned out really good! How has this held up after 2 years? Would you still recommend it?
@ridingdigital
4 жыл бұрын
thanks bud, turned out well, held up ok, flaking around the headers pretty early but most likely my lack of sanding prep there. I'd try Rustoleum next time I think
Im putting a 3.3 gal tank on my 48! Cant wait! Keep up the good work.
@ridingdigital
7 жыл бұрын
+MotorcycleMichael Nice one, best thing I've done on mine so far! Difficult bit was choosing paint....RD
@motorcyclemichael2938
7 жыл бұрын
Riding Digital I'm thinking vivid black, just like the rest of the bike. Actually looking at your bike gave me the idea of getting a 3.3 gal tank. So thank you!
I've got the same Arlen Ness pipes but I've been on the looks out for those exhaust tips. Got any links?
Nice vid....awesome bike
@ridingdigital
5 жыл бұрын
cheers bud 👍🏻
One question though. Why put the heat shields back on if your wrapping??
Really like the finished product. Can you give me a rough layout of the sprays and tools used in the video? Thanks man.
Love the video. The exhausts look like brand new. Can't wait to see them with the wrap back on
@ridingdigital
7 жыл бұрын
+Glen I know, cant believe how good the finish is. It will be interesting to see how well it holds up over the coming months. RD
Hi! When you install the vance and Hines exhaust did you install auto tuner as well? Did you experience any popping sound on your exhaust? Thanks.
@ridingdigital
6 жыл бұрын
+Balisong 5891 Hi! mine is an Arlen Ness Magnaflow Lowdown exhaust, yes I did need to use a tuner (used a V&H FP3). It was unridable without tuning, backfired all the time. I think with any stage 1 (air intake and exhaust change) you'll need some form of tuning 👍 Good luck! RD
How well did your VHT hold up? I'm currently painting mine for the second time using Rustoleum High Heat because VHT failed me within months. Same process, same heat treat.
@dnegel9546
2 жыл бұрын
Update? Did you use primer?
Great video, Great bike! I'm about to sand back and re-paint the headers on my Bonneville T120 Black, got the same Matt paint as you used here, but hadn't really considered Primer? My feeling was I'm only really saning off to key the surface, as such I can spray direct to the keyed surface?
@ridingdigital
2 жыл бұрын
Thanks! My learning was to really remove any rust before spraying. Unsure if the primer makes a huge difference, I imagine it may help a bit. Good luck 👍
What playlist of music is this its great
I’m looking to buy a 48. Or roadster. I’m in AUS and strangely, most I see that are of this vintage or certainly 2016- to 18 have got lots of solid looking surface rust. Pegs area and side strands almost with no paint on them (the arm no the area in contact with the ground obviously). I’m just concerned at how quickly the metals deteriorate on fairly new bikes. Is this your experience and is this a Harley thing. I’ve owned nice BMW sport bikes and have always garaged but have ridden in rain etc and never the amounts of rust, kind of is the only thing turning me off them.
How’s it holding up? And what kit did you buy?
Great video. I just ordered the primer and the black. Is the clear coat necessary? I’m not looking for a shine look.
@ridingdigital
6 жыл бұрын
honestly I'm not sure how essential it is, the finish I used was satin and there are Matt finishes too - the logic was hopefully it would make it more resistant to scratches and stone chips!
I’m going to attempt this on my trask turbo system on my 07 Harley vrod I had a small crack on the mounting tab but think I can try coating. I’m wrinkle blacking the motor over since it’s been 7 years since I did it and still looks great but new pipe paint might as accent the motor as well
@ridingdigital
4 жыл бұрын
hope it goes to plan! Look forward to an update on how it went
How is it holding up currently?
Nice video. How much drying time did you allow before starting the bike. And how did it turn out. Did it last? Just did mine on my gsxr.
@ridingdigital
5 жыл бұрын
Thanks 👍🏻 I left it overnight before starting it up, it's lasted fine except a little bit of peeling by the header, but I could put that down to not sanding enough rust back. Good luck!
Hey man, nice video and nice bike! How has the paint held up? I'm restoring a Ducati and the pipes are in rough shape. Thanks for being thorough and informative!
@ridingdigital
5 жыл бұрын
it didn't hold up too well on the headers but to be fair I could have sanded more corrosion off. I've heard the Rustoleum VHT is better but couldn't get it here. Good luck!
Hey how did the pain fair over the months after this was done. Did the paint stay on? Any paint coming off at the exit point of the engine, on the first bend etc? My experience with VHT has been varied, it totally flaked off one time I did it on a car header, but then stayed on another time I did it on another car - both with what I would class as very good prep before hand. Interested to know how it lasted on your bike as I am about to do a Kawasaki headers, and about to select a paint, and heading towards VHT again, but not 100% sure. Thanks
@ridingdigital
6 жыл бұрын
+James B Hey, so I wrapped the pipes about 2 weeks after painting them, so I can only see the final few inches of pipe at the tips which is holding up fine. The paint right by the header had already started to flake before I wrapped them (showed it in my wrapping video) - If I could go again I'd try the high temp Rustoleum which seems to have better reviews. couldn't get it in the UK though! Good luck with yours. RD
Most american british guy ever lol
@ridingdigital
5 жыл бұрын
HELL YEEEHHAAA! 🤘
@guzzigoose2482
2 жыл бұрын
Budweiser and a harley in the living room... I didn't know I had British family 🤣
Good job
Great video, what do u think about using paint stripper to prep them?
@ridingdigital
4 жыл бұрын
thanks, I dont know but would be interested to know the results, sanding it was a total pain
nice!
Can you put a link on what you use
Hi l have no garage. Is there away to paint the exhaust shields on my 48
@ridingdigital
Жыл бұрын
sure, I painted mine outside on a washing line! I find it easier when they are hanging
Very neat painting job, man. Let me ask: What should i do if the pipes were chromed and i want to paint them to matte black?
@adrianyero3381
3 жыл бұрын
Sand paper first. Kill the shine.
Hey mate, 3 questions 1 - What grade sand paper did you use? 2 - What liquid did you rub the shields / exhausts with prior to applying primer 3 - Which specific VHT products did you use and in what order? My bikes arrived and I'm looking to do this exact project over a weekend asap
@ridingdigital
5 жыл бұрын
hey; 1) 120grit then 180grit 2) Alcohol decreaser (ie no water content) 3) grey primer, paint, satin coat all VHT High temperature spray paint (can't remember exact name but you can see the can when I hold it in front in the camera). Good luck, get as much rust off as you can, it's all in the prep. RD
Hi there, nice video! may i know how many cans of black paint u used to do up all 4 pieces? Thanks! I need to do up my Duke390 exhaust system too ;-)
@ridingdigital
6 жыл бұрын
thanks! I only used 1 can, although the last piece only got a thin layer!
I have a small scrape on my header on my Bonneville T120 Black and I'd like to try this as a repair. How are they holding up long term ?
@ridingdigital
5 жыл бұрын
its held up fine on the areas that weren't too rusty, would have thought it would be fine if you prep it well 👍🏻
paint flaking issues up till now ? also when you cure it did it flake?
@ridingdigital
5 жыл бұрын
na it's held up really well, bit of flaking by the header after the first cure but I probably should have done a better job removing corrosion
Is the lacquer only to stop scratches?
@ridingdigital
5 жыл бұрын
Yea, not essential but the hope is it gives some extra protection. it also gives you the finish like gloss or in my case satin
Nice vid! How did you find the endurance of the VHT paint in the end?
@ridingdigital
2 жыл бұрын
cheers! Paint started peeling at the header quite soon after, I'd sand more here next time. I wrapped the pipes soon after but the paint on the exposed tips held up for years
What type of sandpaper did you use?
@ridingdigital
5 жыл бұрын
Hi, started with 80grit and switched through to 120G at the end
Always wear gloves and a respirator when messing with exhaust wrap tape! It isn't asbestos but a form of fiberglass. How does the paint wear? Did it crack or change color?
@Vallcon
4 жыл бұрын
Yes id like to know the answer to this. I painted mine without using the primer and within 10k miles it looked cloudy and heat worn again. Wonder if this ended up the same.
do you recommend this paint for the entire engine? it's VHT Flameproof Flat Black?
@ridingdigital
6 жыл бұрын
+paolo intravartolo Hi, it was VHT flameproof black, I've had peeling and flaking on the hottest part of the exhaust, although the engine will be cooler than the pipes. I've heard Rustoleum high temp paints are better but couldn't get them here. Good luck. RD
@Anderle52134
6 жыл бұрын
Don't use primer!!!! Been looking at this and found that those who experienced flaking/peeling used Primer. Those where it held up fine did NOT USE PRIMER.
Some dude in California painted bronze vht and bike caught fire. Luckily no damage was done, he just scraped the paint off later. How's your feedback?
@ridingdigital
2 жыл бұрын
my bike didn't catch fire, but I did have some peeling on the header
My can says wait 7 days for paint to cure. Did you wait that long till you turned on the bike?
@ridingdigital
4 жыл бұрын
no I waiting a day then ran 2 heat treatment cycles, I would follow the instructions on your can tho for best results...its not worth short cutting them only to have to do it all again!
Was it the wrap that damaged your pipes? Thinking about wrapping my new big radius on my 48 but I’ve heard wrap can really damage them. What are your thoughts on this?
@ridingdigital
6 жыл бұрын
+Jon Nye There's no doubt that the wrap speeds up corrosion, particularly if they get wet often. But pipes will deteriorate anyway and when the wrap is on it hides any corrosion from view. Those pipes were wrapped for around 5000 miles over 2 years so not bad, and only a few hours work to return them to former glory. Depends how much you like the wrapped look! RD
@jonnynye
6 жыл бұрын
Riding Digital thanks for your advice. I absolutely LOVE the wrapped look! I’ve heard all sorts of horror stories about cracked pipes etc from wrapping them. I think perhaps it’s worth the risk! I guess I don’t mind doing a little work every 2 years or so to get them back looking great. Thanks for responding, keep up the good work!
Hey I’ve had the paint for a while but been skeptic on doing it. Seen some pipes flake after they tried curing it. How’s it been holding up since then?
@bthrush4
5 сағат бұрын
Mine just did and I don’t understand why
How’d they hold up after time?
@ridingdigital
Жыл бұрын
Held up ok except around the headers but I ended up wrapping them leaving the tips exposed so it covered that part up
hi, Can I paint other engine parts with the VHT paint? basically covers...
@ridingdigital
5 жыл бұрын
I wouldn't recommend it, as for the paint to harden properly it needs to be heated to the right temperature and cooled. For me the paint was very soft until I'd done this, scratched with a fingernail. I'd suggest getting a spray paint best suited to the surface you're painting 👍🏻
@rcsv54
5 жыл бұрын
@@ridingdigital Got it, thanks a lot
Hey man did you have to change your front wheel to be able using that big tyre?! Thanks
@ridingdigital
5 жыл бұрын
Na it's a stock wheel and tyre on the Sportster 48
@nomore4403
5 жыл бұрын
@@ridingdigital thanks for replying , i was soo frustrated i cant find any bigger tyre for my " 2008 nightster 1200 xln " , it turn out my front wheel is 19" i believe , so i guess to be able to put bigger tyre is by putting 16 or 17" wheel i guess ???
How has the paint held up? Any flaking so far? I’ve been seeing a lot negative reviews and just wanted your opinion.
@ridingdigital
5 жыл бұрын
Panicked on day 2 as a bit of flaking on the headers, but then I wrapped them which covered all bar the final third and that's held up fine. I think it's all in the prep tbh and I probably should have done a better job of getting all the rust of for a better result
The beer ... didn't see it. Was it behind that Budweiser box?
@ridingdigital
2 жыл бұрын
😂
Like Comment and even Subbed . Might try it . Maybe on the old Jeepster pipes first. How did they hold up... Paint still intact ??
@ridingdigital
2 жыл бұрын
Cheers 👊 Pipes held up pretty well over the years after, except around the header where it peeled pretty soon after, although I think more sanding prep was needed there.
Wow.. that air filter makes your bike stand out. Love it
@ridingdigital
5 жыл бұрын
Thanks mate 👊🏻👍🏻
What’s the first spray that u use which is white ? How long would the color last? Is it still black as it looks at beginning? Thank u for replying!
@ridingdigital
5 жыл бұрын
First spray is the high temp VHT primer, I'm over a year and 3000 miles in and the colour has faded a little, but still looks good. Sadly it will never look as it did when fresh, even on a brand new pipe. Good luck!
what make year sportster mate?
@ridingdigital
9 ай бұрын
2015 Sportster 48 1200
You did this job in 2017. Many people, including myself, are asking you how this paint "held up" because many of us have tried this same VHT Ceramic based Paint, only to find that after a few months it CHIPS LIKE CRAZY. Can you PLEASE reply to confirm your Post-Usage experience with the longevity of this ceramic paint. (I must tell you, I was just as happy with it after I initially used it. Then a squirrel dropped and acorn from the tree above (about a 20 foot drop), and that thing took a wicked chip out of the paint). Then the "windy riding chipping" started. Then the "bare touch with a tool takes out a chip," etc, etc, etc.... I've concluded CERAMIC paint is the problem. It is "CERAMIC" which is naturally BRITTLE. However, inside the hood of a car s a pretty safe place for ANY "heat Paint" which is to say that I am stating is the reason why VHT High Heat Ceramic paint will _always_ fail. After VHT Ceramic is (truly) fully cured, it becomes FRAGILE CERAMIC. Anyway, PLEASE reply with your "post-painting" experience. MANY people are asking you about it and the lack of an answer is kind-of speaking for itself. (Thanks --Gregg)
@ridingdigital
3 жыл бұрын
Hi Gregg, thanks for flagging, I've replied to a very large number of comments querying this over the years, but not every one particuarly recently as I've got a lot on. The short answer is not too well, rust came through at the header but I wrapped them anyway and the tips where heat was less extreme it was fine. No chipping issues. I'll post a general comment with an update, bit if you look through many of the comments querying it have an answer. Cheers
Good
Dude's a brit who rides a harley and drinks bud😂🤙 good vid man thanks
@ridingdigital
5 жыл бұрын
I drink tea and ride a penny farthing at weekends though 🧐
@aloisius4188
4 жыл бұрын
They are not that rare a species, Collin. I know a couple of Yanks that ride Triumph Street Triple 765, and like Guiness.
budweiser? you really went all in with the americana
2 years later, how did the VHT High Temp paint hold up?
@ridingdigital
5 жыл бұрын
a few days in paint started peeling from the headers, so either couldn't take the heat or didnt prep enough. wrapped the pipes since so only have the final 6 inches exposed now but they've held up fine
@martyscncgarage5275
5 жыл бұрын
@@ridingdigital thanks, I just can't see any type of paint actually holding up on exhaust systems