I hope this tutorial helps you better understand how to use SoapCalc. Happy Soaping!!!!

@AbroadFamily

2 жыл бұрын

hi i have. a mold from amazon and it states 11ozs and dimensions are 9.5 * 5* 2.68 . I am not sure I input the 11oz into soap calc for weight of oils which says 11ozs or do i do other calculations

Your tutorial is the absolute best on here!!! Thank you for being so thorough and straight to the point💜

Great video! You made it easy to understand how to use soapcalc.

Made this so simple to understand!!!!!!!

Love me some soap calc to create recipes!

Thank you for this info I have watched several and noone explained it like u may god bless u queen and increase u in all areas of ur life 🙏🏾

@yorelnaturals

3 жыл бұрын

Thank you. Glad I could break it down for you. I also have a soap group on Facebook if you think it may be beneficial to your growth. Just make sure you complete the entry questions so the moderators will approve you if I don't see it right away. facebook.com/groups/soapmakingworldwide/

@SecretBeautes

3 жыл бұрын

Tu I will

Thanks so much i really appreciate how you explained soapcal be blessed 👍

Thank you.

I am just getting started. This was exremely helpful! Thank you.

Thank you! It was very informative and easy to understand. I watched several videos and you simplified it!!!!!

@leeanngill8869

3 жыл бұрын

I watched many as well and I couldn't understand the purpose of the soap calculator, it made no sense. But thank you sis for making simple

Thank you so much, this has really helped me a lot ... I will definitely try the recipe and send you pictures on Facebook, again thank you so much

@yorelnaturals

3 жыл бұрын

I'm glad this made things clear for you.

I loved your tutorial. You were pretty thorough. Thank you❤️

You are adorable, thank you for such an informative clear direction

Thank you so much for sharing

Super helpful. What’s the recommendation size for the 42 ounce bar so there isn’t overflow or too much extra. Or just put 42 in the size and it should be good?

Thank youuuuuuuuuuuuuuuuu....this really helped give me a basic understanding of how to start. How do you decide which butters/oils to use? Is it just a preference? Iknow I want to use multiple hard butters, just need to figure out where to start with those.

Great Video but can you please explain how to know the weight of oils? what number goes in the box, the total weight of the mould ( volume) or the % of Oils out of the total volume? I cant find any videos on how to know what # to put in that box Your help would be much appreciated :) Thank you

Hello what happens if it does not equal 100 when putting in numbers

You made it so much easier for me to understand thank you! My only concern is that the unsat ratio is 51:49 what should I do?

@yorelnaturals

3 жыл бұрын

just adjust the oils in your recipe.

is canola 2.40 oz the same in weight as 68.40 in gram

Mine didn't calculate to a hundred I don't know why

I think, in my opinion and programming experience, that there are better ways to put advertisements in a non distracting manner. Those flashy advertisements are very distracting when I am trying to design my soap. That is my only gripe about soap calc. The only time I use it is if I have a rare oil that is not typically found on the one I mainly use which has no advertisements or anything that slows down my computer. Soap calc- at least make your ads non flashy please.

I have a question. The soap weight before CP cure is way higher than what the mold can hold. What do we do with the extra? Is there no way to calculate exactly our mold size and get the correct number to pour?

@yorelnaturals

3 жыл бұрын

Yes there is you'd have to input your batch weight as the size of your mold. Ex: If your mold is 30 ounces then calculate recipe oil weight as such. Still enter your oils in the same percentages, the system will calculate how much of each oil, water and lye you'll need based on said weight. On the other hand if your weight is higher than your mold can hold you can either pour into a second mold or pour the extra into smaller molds for samples.

@sorayashahi

3 жыл бұрын

YorelNaturals so the calculation formula is just for the oils and not the entire capacity of my mold right? So if I calculate that my mold needs 1 lb of soap, if means my mold can hold that much oil PLUS the water and lye?

@yorelnaturals

3 жыл бұрын

@@sorayashahi Correct

@sorayashahi

3 жыл бұрын

YorelNaturals phew thank you. I was going crazy trying to understand if I had to only enter 70% of my calculated total or the whole number lol.

@yorelnaturals

3 жыл бұрын

Remember: Your oil weight is the weight before your soap cures. When you calculate your oils your calculation is saying when I add the water and lye to these oils it will be enough to fill my mold. So, your goal is to figure out how much liquid your mold holds. Ex: If you have a 16 oz. mold calculate 16 oz. of oils. The calculator will tell you how much lye and water to add. When mixed together you will be pouring volume, not weight. Are you in my FB soap group? If not, here's the link facebook.com/groups/soapmakingworldwide

Your voice is not clear. Very low volume